{ "id": "osc_out_dat", "name": "OSC Out DAT", "displayName": "OSC Out DAT", "category": "DAT", "subcategory": "Utilities", "version": "", "lastUpdated": "2025-08-07T07:50:05.960Z", "sourceFile": "C:\\Program Files\\Derivative\\TouchDesigner\\Samples\\Learn\\OfflineHelp\\https.docs.derivative.ca\\OSC_Out_DAT.htm", "url": "", "description": "The OSC Out DAT is used for sending information over a OSC connection between remotely located computers. Use the .sendOSC() python method to output the OSC messages.", "summary": "The OSC Out DAT is used for sending information over a OSC connection between remotely located computers. Use the .sendOSC() python method to output the OSC messages.", "details": "", "usage": "", "tips": [], "warnings": [], "parameters": [ { "id": null, "name": "Active", "label": "Active", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nThe OSC Out is used for sending information over a OSC connection between remotely located computers. Use the .sendOSC() python method to output the OSC messages.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out sendOSC() function will accept a list of messages and send as a bundle when you set the kwarg asBundle=True.\nBundles were created as a performance optimization for real-time control of synthesizers with a large number of parameters. (thx Jesse Gilbert)\nSee also OSC, OSC In DAT, OSC In CHOP, OSC Out CHOP, iOS and OSC, Network Protocols, Sync.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutDAT_Class\n\nContents\n \n \n \n \n \n \n \n \n \n\n\n\n\n\n active - While on, the receives/sends information from/to the network port. While Off, no updating occurs. Data sent to the port is lost.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n address - The network address of the target computer when using UDP. For multi-cast this is the multi-cast address to send to. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The network port to send to.\n\n\n\t\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n addscope - To reduce which channels are generated, you can use channel name patterns to include or exclude channels. For example, ^*accel* will exclude accelerometer channels coming in from an iOS or iPhone app like mrmr. See Pattern Matching for the syntax of the possible channel name patterns.\n\n\n\t\t\n typetag - Includes the argument list type tag in each message. It includes the parameter type keywords (in case the parsing application needs to identify parmameter types).\n\n\n\t\t\n splitbundle - When On, each message contained within a bundle is given its own row.\n\n\n\t\t\n splitmessage - When On, OSC address and arguments are given individual columns, otherwise they are included in the message column.\n\n\n\t\t\n bundletimestamp - When On, each bundle timestamp value is included in a column.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message received.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location. callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n -\n - Number of rows in this . - Number of columns in this .\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nEach operator can have a set of text strings that are its \"tags\". You can set them and search for them within TouchDesigner.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_DAT&oldid=26635\"\n\t\tCategory: DATs", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.956Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Active", "label": "Active", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nThe OSC Out is used for sending information over a OSC connection between remotely located computers. Use the .sendOSC() python method to output the OSC messages.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out sendOSC() function will accept a list of messages and send as a bundle when you set the kwarg asBundle=True.\nBundles were created as a performance optimization for real-time control of synthesizers with a large number of parameters. (thx Jesse Gilbert)\nSee also OSC, OSC In DAT, OSC In CHOP, OSC Out CHOP, iOS and OSC, Network Protocols, Sync.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutDAT_Class\n\nContents\n \n \n \n \n \n \n \n \n \n\n\n\n\n\n active - While on, the receives/sends information from/to the network port. While Off, no updating occurs. Data sent to the port is lost.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n address - The network address of the target computer when using UDP. For multi-cast this is the multi-cast address to send to. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The network port to send to.\n\n\n\t\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n addscope - To reduce which channels are generated, you can use channel name patterns to include or exclude channels. For example, ^*accel* will exclude accelerometer channels coming in from an iOS or iPhone app like mrmr. See Pattern Matching for the syntax of the possible channel name patterns.\n\n\n\t\t\n typetag - Includes the argument list type tag in each message. It includes the parameter type keywords (in case the parsing application needs to identify parmameter types).\n\n\n\t\t\n splitbundle - When On, each message contained within a bundle is given its own row.\n\n\n\t\t\n splitmessage - When On, OSC address and arguments are given individual columns, otherwise they are included in the message column.\n\n\n\t\t\n bundletimestamp - When On, each bundle timestamp value is included in a column.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message received.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location. callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n -\n - Number of rows in this . - Number of columns in this .\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nEach operator can have a set of text strings that are its \"tags\". You can set them and search for them within TouchDesigner.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_DAT&oldid=26635\"\n\t\tCategory: DATs", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.957Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Active", "label": "Active", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "The OSC Out is used for sending information over a OSC connection between remotely located computers. Use the .sendOSC() python method to output the OSC messages.\nOSC bundles allows you to send a group of messages in a single command rather than as separate, individual messages. The OSC Out sendOSC() function will accept a list of messages and send as a bundle when you set the kwarg asBundle=True.\nBundles were created as a performance optimization for real-time control of synthesizers with a large number of parameters. (thx Jesse Gilbert)\nSee also OSC, OSC In DAT, OSC In CHOP, OSC Out CHOP, iOS and OSC, Network Protocols, Sync.\nNOTE for Windows OS - If experiencing connection issues make sure Windows Firewall is disabled.\noscoutDAT_Class\n\nContents\n \n \n \n \n \n \n \n \n \n\n\n\n\n\n active - While on, the receives/sends information from/to the network port. While Off, no updating occurs. Data sent to the port is lost.\n\n\n\t\t\n protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -\n\t\t\n address - The network address of the target computer when using UDP. For multi-cast this is the multi-cast address to send to. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.\n\n\n\t\t\n port - The network port to send to.\n\n\n\t\n localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.\n\n\n\t\n shared - Use the same connection as other networking DATs using the same network protocol.\n\n\n\t\t\n addscope - To reduce which channels are generated, you can use channel name patterns to include or exclude channels. For example, ^*accel* will exclude accelerometer channels coming in from an iOS or iPhone app like mrmr. See Pattern Matching for the syntax of the possible channel name patterns.\n\n\n\t\t\n typetag - Includes the argument list type tag in each message. It includes the parameter type keywords (in case the parsing application needs to identify parmameter types).\n\n\n\t\t\n splitbundle - When On, each message contained within a bundle is given its own row.\n\n\n\t\t\n splitmessage - When On, OSC address and arguments are given individual columns, otherwise they are included in the message column.\n\n\n\t\t\n bundletimestamp - When On, each bundle timestamp value is included in a column.\n\n\n\n\n\n callbacks - The Callbacks will execute once for each message received.\n\n\n\t\t\n executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location. callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.\n\t\t\n fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .\n\n\n\t\t\n clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.\n\n\n\t\t\n maxlines - Limits the number of messages, older messages are removed from the list first.\n\n\n\t\t\n clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()\n\n\n\t\t\n bytes - Outputs the raw bytes of the message in a separate column.\n\n\n\n\n\n language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.\n\n extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.\n\n customext - Specifiy the custom extension.\n\n\n\n wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.\n\n\n\n -\n\nExtra Information for the OSC Out can be accessed via an Info CHOP.\n\n\n -\n - Number of rows in this . - Number of columns in this .\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002018.28070before 2018.28070\nDATs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nEach operator can have a set of text strings that are its \"tags\". You can set them and search for them within TouchDesigner.\n\n\n\nThe generic thing that holds an Operator, and includes Flags (display, bypass, lock, render, immune) and its position/size in the network. Whether you \"lay down an Operator\" or \"lay down an Node\", you're doing the same thing.\n\n\n\nAny of the procedural data operators. OPs do all the work in TouchDesigner. They \"cook\" and output data to other OPs, which ultimately result in new images, data and audio being generated. See Node.\n\n\n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=OSC_Out_DAT&oldid=26635\"", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Active", "label": "Active", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "active - While on, the receives/sends information from/to the network port. While Off, no updating occurs. Data sent to the port is lost.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Protocol", "label": "Protocol", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "protocol - - Selects the network protocol to use. Refer to the Network Protocols article for more information.\n\n msging - multicastmsging - reliablemsging -", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Messaging (UDP)", "label": "Messaging (UDP)", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "msging - multicastmsging - reliablemsging -", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Network Address", "label": "Network Address", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "address - The network address of the target computer when using UDP. For multi-cast this is the multi-cast address to send to. This address is a standard WWW address, such as 'foo' or 'foo.bar.com'. You can put an IP address (e.g. 100.123.45.78). If you put \"localhost\", it means the other end of the pipe is on the same computer.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Port", "label": "Port", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "port - The network port to send to.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Local Address", "label": "Local Address", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "localaddress - Specify an IP address to send from, useful when the system has mulitple NICs (Network Interface Card) and you want to select which one to use.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Shared Connection", "label": "Shared Connection", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "shared - Use the same connection as other networking DATs using the same network protocol.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "OSC Address Scope", "label": "OSC Address Scope", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "addscope - To reduce which channels are generated, you can use channel name patterns to include or exclude channels. For example, ^*accel* will exclude accelerometer channels coming in from an iOS or iPhone app like mrmr. See Pattern Matching for the syntax of the possible channel name patterns.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Include Type Tag", "label": "Include Type Tag", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "typetag - Includes the argument list type tag in each message. It includes the parameter type keywords (in case the parsing application needs to identify parmameter types).", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Split Bundle into Messages", "label": "Split Bundle into Messages", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "splitbundle - When On, each message contained within a bundle is given its own row.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Split Message into Columns", "label": "Split Message into Columns", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "splitmessage - When On, OSC address and arguments are given individual columns, otherwise they are included in the message column.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Bundle Timestamp Column", "label": "Bundle Timestamp Column", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "bundletimestamp - When On, each bundle timestamp value is included in a column.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Callbacks DAT", "label": "Callbacks DAT", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "callbacks - The Callbacks will execute once for each message received.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.958Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Execute from", "label": "Execute from", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "executeloc - - Determines the location the script is run from.\n\n current - The script is executed from the current node location. callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Current Node", "label": "Current Node", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "current - The script is executed from the current node location. callbacks - The script is executed from the location of the specified in the parameter. op - The script is executed from the operator specified in the parameter below.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "From Operator", "label": "From Operator", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "fromop - The operator whose state change will trigger the to execute its script when is set to . This operator is also the path that the script will be executed from if the parameter is set to .", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Clamp Output", "label": "Clamp Output", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "clamp - The is limited to 100 messages by default but with Clamp Output, this can be set to anything including unlimited.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Maximum Lines", "label": "Maximum Lines", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "maxlines - Limits the number of messages, older messages are removed from the list first.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Clear Output", "label": "Clear Output", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "clear - Deletes all lines except the heading. To clear with a python script op(\"opname\").par.clear.pulse()", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Bytes Column", "label": "Bytes Column", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "bytes - Outputs the raw bytes of the message in a separate column.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Language", "label": "Language", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "language - - Select how the decides which script language to operate on.\n\n input - The uses the inputs script language. node - The uses it's own script language.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Input", "label": "Input", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "input - The uses the inputs script language. node - The uses it's own script language.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Edit/View Extension", "label": "Edit/View Extension", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "extension - - Select the file extension this should expose to external editors.\n\n dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "dat", "label": "dat", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "dat - various common file extensions. language - pick extension from DATs script language. custom - Specify a custom extension.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Custom Extension", "label": "Custom Extension", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "customext - Specifiy the custom extension.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Word Wrap", "label": "Word Wrap", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "wordwrap - - Enable Word Wrap for Node Display.\n\n input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Input", "label": "Input", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "input - The uses the inputs setting. on - Turn on Word Wrap. off - Turn off Word Wrap.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:05.959Z", "rawData": {}, "sourceElement": null } ], "parameterGroups": {}, "codeExamples": [], "pythonExamples": [], "expressions": [], "commonInputs": [], "commonOutputs": [], "relatedOperators": [], "workflowPatterns": [], "images": [], "videos": [], "assets": [], "keywords": [ "osc", "out", "dat", "used", "sending", "information", "over", "connection", "between", "remotely", "located", "computers.", ".sendosc()" ], "tags": [ "DAT", "TouchDesigner", "OSC Out DAT" ], "searchWeight": 1, "contentHash": "", "processingDate": "2025-08-07T07:50:05.960Z", "processingVersion": "1.0.0", "isValid": true, "validationErrors": [] }