{
  "id": "tablet_chop",
  "name": "Tablet CHOP",
  "displayName": "Tablet CHOP",
  "category": "CHOP",
  "subcategory": "Generators",
  "version": "",
  "lastUpdated": "2025-08-07T07:50:10.429Z",
  "sourceFile": "C:\\Program Files\\Derivative\\TouchDesigner\\Samples\\Learn\\OfflineHelp\\https.docs.derivative.ca\\Tablet_CHOP.htm",
  "url": "",
  "description": "The Tablet CHOP gets the Wacom tablet X and Y values, and also gets pen tip pressure, X tilt and Y tilt, and the various pen buttons. Two pens can be used to output one set of channels for each pen. The Tablet CHOP will initialize/install when the CHOP is created.",
  "summary": "The Tablet CHOP gets the Wacom tablet X and Y values, and also gets pen tip pressure, X tilt and Y tilt, and the various pen buttons. Two pens can be used to output one set of channels for each pen. T",
  "details": "",
  "usage": "",
  "tips": [],
  "warnings": [],
  "parameters": [
    {
      "id": null,
      "name": "X Coordinate",
      "label": "X Coordinate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nThe Tablet  gets the Wacom tablet X and Y values, and also gets pen tip pressure, X tilt and Y tilt, and the various pen buttons. Two pens can be used to output one set of channels for each pen. The Tablet  will initialize/install when the  is created. \t\t\nIt supports the simultaneous use of two devices (Stylus Pen, Airbrush or 4D Mouse) on the same tablet, with the \"1st Pen\" folder controlling the parameters of the primary device (the first one activated), and the \"2nd Pen\" folder controlling the parameters of the other device.\t\t\t\nPut a channel name in a parameter to create that channel.\t\t\t\nThe range of all axes is -1.0 to 1.0. The values of the Button parameters are 0 for Button Up and 1 for Button Down. All axis and button channels are active when the Active state is On.\t\t\t\nIn most parameter fields of this , if you put a channel name in the parameter, it will attempt to read that parameter and output the channel. Otherwise no channel is created.\t\t\t\nFor advice on setting up the tablet and tuning the sensitivity of the pen and tablet, please read the Wacom Intuos article.\ntabletCHOP_Class\n\nContents\n \n \n \n \n \n \n \n \n\n\n\n\n\nThis page let you assign channels names for the inputs from the 1st Pen assigned to the tablet.\n\n  xcoord - The channel name for the movement of the pen in the x direction.\n\n\n\n  ycoord - The channel name for the movement of the pen in the y direction.\n\n\n\n  pressure - The channel name for the pressure reported by the pen.\n\n\n\n  xtilt - The channel name for the tilt of the pen in the x direction.\n\n\n\n  ytilt - The channel name for the tilt of the pen in the y direction.\n\n\n\n  tanpressure - The channel name for a finger rollar wheel if available.\n\n\n\n  zcoord - The channel name for a thumb rollar wheel if available.\n\n\n\n  rotation - The channel name for the rotation the pen is reporting.\n\n\n\n  button1 - The channel name for the button reported as Button 1.\n\n\n\n  button2 - The channel name for the button reported as Button 2.\n\n\n\n  button3 - The channel name for the button reported as Button 3.\n\n\n\n  button4 - The channel name for the button reported as Button 4.\n\n\n\n  button5 - The channel name for the button reported as Button 5.\n\n\n\n\n\nThe second pen has the same parameters as the first pen, and the values are taken from the second device.\n\n\n  active -  - While On, the pen movement will be output from and the  will cook every frame. When set to Off it will not cook and the values will not be updated. While Playing will capture pen events only when the Timeline is playing forward.\n\n off - on - play -\n\n  rate - The sample rate of the channels, in samples per second.\n\n\n\n  left -  - The left extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope before the start of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  right -  - The right extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope after the end of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  defval - The value used for the Default Value extend condition.\n\n\n\n\n\n  timeslice - Turning this on forces the channels to be \"Time Sliced\".  A  is the time between the last cook frame and the current cook frame.\n\n\n\n  scope - To determine which channels get affected, some CHOPs use a  string on the Common page.\n\n\n\n  srselect -  - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n  exportmethod -  - This will determine how to connect the  channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked  table and references the channel via the index of the channel in the . datname - Uses the docked  table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n  autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n  exporttable - The  used to hold the export information when using the  Table  Methods (See above).\n\n\n\n\n\nExtra Information for the Tablet  can be accessed via an Info CHOP.\n\n\n\n - Start of the  interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if  is  enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002020.200002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=Tablet_CHOP&oldid=24132\"\n\t\tCategory: CHOPs",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.423Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "X Coordinate",
      "label": "X Coordinate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "From Derivative\n\t\t\n\t\t\n\t\t\n\t\t\n\t\tJump to navigation\n\t\tJump to search\n\t\t\nThe Tablet  gets the Wacom tablet X and Y values, and also gets pen tip pressure, X tilt and Y tilt, and the various pen buttons. Two pens can be used to output one set of channels for each pen. The Tablet  will initialize/install when the  is created. \t\t\nIt supports the simultaneous use of two devices (Stylus Pen, Airbrush or 4D Mouse) on the same tablet, with the \"1st Pen\" folder controlling the parameters of the primary device (the first one activated), and the \"2nd Pen\" folder controlling the parameters of the other device.\t\t\t\nPut a channel name in a parameter to create that channel.\t\t\t\nThe range of all axes is -1.0 to 1.0. The values of the Button parameters are 0 for Button Up and 1 for Button Down. All axis and button channels are active when the Active state is On.\t\t\t\nIn most parameter fields of this , if you put a channel name in the parameter, it will attempt to read that parameter and output the channel. Otherwise no channel is created.\t\t\t\nFor advice on setting up the tablet and tuning the sensitivity of the pen and tablet, please read the Wacom Intuos article.\ntabletCHOP_Class\n\nContents\n \n \n \n \n \n \n \n \n\n\n\n\n\nThis page let you assign channels names for the inputs from the 1st Pen assigned to the tablet.\n\n  xcoord - The channel name for the movement of the pen in the x direction.\n\n\n\n  ycoord - The channel name for the movement of the pen in the y direction.\n\n\n\n  pressure - The channel name for the pressure reported by the pen.\n\n\n\n  xtilt - The channel name for the tilt of the pen in the x direction.\n\n\n\n  ytilt - The channel name for the tilt of the pen in the y direction.\n\n\n\n  tanpressure - The channel name for a finger rollar wheel if available.\n\n\n\n  zcoord - The channel name for a thumb rollar wheel if available.\n\n\n\n  rotation - The channel name for the rotation the pen is reporting.\n\n\n\n  button1 - The channel name for the button reported as Button 1.\n\n\n\n  button2 - The channel name for the button reported as Button 2.\n\n\n\n  button3 - The channel name for the button reported as Button 3.\n\n\n\n  button4 - The channel name for the button reported as Button 4.\n\n\n\n  button5 - The channel name for the button reported as Button 5.\n\n\n\n\n\nThe second pen has the same parameters as the first pen, and the values are taken from the second device.\n\n\n  active -  - While On, the pen movement will be output from and the  will cook every frame. When set to Off it will not cook and the values will not be updated. While Playing will capture pen events only when the Timeline is playing forward.\n\n off - on - play -\n\n  rate - The sample rate of the channels, in samples per second.\n\n\n\n  left -  - The left extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope before the start of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  right -  - The right extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope after the end of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  defval - The value used for the Default Value extend condition.\n\n\n\n\n\n  timeslice - Turning this on forces the channels to be \"Time Sliced\".  A  is the time between the last cook frame and the current cook frame.\n\n\n\n  scope - To determine which channels get affected, some CHOPs use a  string on the Common page.\n\n\n\n  srselect -  - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n  exportmethod -  - This will determine how to connect the  channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked  table and references the channel via the index of the channel in the . datname - Uses the docked  table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n  autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n  exporttable - The  used to hold the export information when using the  Table  Methods (See above).\n\n\n\n\n\nExtra Information for the Tablet  can be accessed via an Info CHOP.\n\n\n\n - Start of the  interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if  is  enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002020.200002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=Tablet_CHOP&oldid=24132\"\n\t\tCategory: CHOPs",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.425Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "X Coordinate",
      "label": "X Coordinate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "The Tablet  gets the Wacom tablet X and Y values, and also gets pen tip pressure, X tilt and Y tilt, and the various pen buttons. Two pens can be used to output one set of channels for each pen. The Tablet  will initialize/install when the  is created. \t\t\nIt supports the simultaneous use of two devices (Stylus Pen, Airbrush or 4D Mouse) on the same tablet, with the \"1st Pen\" folder controlling the parameters of the primary device (the first one activated), and the \"2nd Pen\" folder controlling the parameters of the other device.\t\t\t\nPut a channel name in a parameter to create that channel.\t\t\t\nThe range of all axes is -1.0 to 1.0. The values of the Button parameters are 0 for Button Up and 1 for Button Down. All axis and button channels are active when the Active state is On.\t\t\t\nIn most parameter fields of this , if you put a channel name in the parameter, it will attempt to read that parameter and output the channel. Otherwise no channel is created.\t\t\t\nFor advice on setting up the tablet and tuning the sensitivity of the pen and tablet, please read the Wacom Intuos article.\ntabletCHOP_Class\n\nContents\n \n \n \n \n \n \n \n \n\n\n\n\n\nThis page let you assign channels names for the inputs from the 1st Pen assigned to the tablet.\n\n  xcoord - The channel name for the movement of the pen in the x direction.\n\n\n\n  ycoord - The channel name for the movement of the pen in the y direction.\n\n\n\n  pressure - The channel name for the pressure reported by the pen.\n\n\n\n  xtilt - The channel name for the tilt of the pen in the x direction.\n\n\n\n  ytilt - The channel name for the tilt of the pen in the y direction.\n\n\n\n  tanpressure - The channel name for a finger rollar wheel if available.\n\n\n\n  zcoord - The channel name for a thumb rollar wheel if available.\n\n\n\n  rotation - The channel name for the rotation the pen is reporting.\n\n\n\n  button1 - The channel name for the button reported as Button 1.\n\n\n\n  button2 - The channel name for the button reported as Button 2.\n\n\n\n  button3 - The channel name for the button reported as Button 3.\n\n\n\n  button4 - The channel name for the button reported as Button 4.\n\n\n\n  button5 - The channel name for the button reported as Button 5.\n\n\n\n\n\nThe second pen has the same parameters as the first pen, and the values are taken from the second device.\n\n\n  active -  - While On, the pen movement will be output from and the  will cook every frame. When set to Off it will not cook and the values will not be updated. While Playing will capture pen events only when the Timeline is playing forward.\n\n off - on - play -\n\n  rate - The sample rate of the channels, in samples per second.\n\n\n\n  left -  - The left extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope before the start of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  right -  - The right extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope after the end of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter\n\n  defval - The value used for the Default Value extend condition.\n\n\n\n\n\n  timeslice - Turning this on forces the channels to be \"Time Sliced\".  A  is the time between the last cook frame and the current cook frame.\n\n\n\n  scope - To determine which channels get affected, some CHOPs use a  string on the Common page.\n\n\n\n  srselect -  - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.\n\n  exportmethod -  - This will determine how to connect the  channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked  table and references the channel via the index of the channel in the . datname - Uses the docked  table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.\n\n  autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.\n\n\n\n  exporttable - The  used to hold the export information when using the  Table  Methods (See above).\n\n\n\n\n\nExtra Information for the Tablet  can be accessed via an Info CHOP.\n\n\n\n - Start of the  interval in samples. - Number of samples in the . - The samplerate of the channels in frames per second. - Number of channels in the . - 1 if  is  enabled, 0 otherwise. - A count of how often the export connections have been updated.\n - Number of times the operator has cooked since the process started. - Duration of the last cook in milliseconds. - Frame number when this operator was last cooked relative to the component timeline. - Frame number when this operator was last cooked relative to the absolute time. - Time in milliseconds at which the operator started cooking in the frame it was cooked. - Time in milliseconds at which the operator finished cooking in the frame it was cooked. - 1 if operator was cooked this frame. - Number of warnings in this operator if any. - Number of errors in this operator if any.\nTouchDesigner Build: Latest\\n2021.100002020.200002018.28070before 2018.28070\nCHOPs\n• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • \n\nAn Operator Family which operate on Channels (a sequence of numbers (Samples)) which are used for animation, audio, mathematics, simulation, logic, UI construction, and data streamed from/to devices and protocols.\n\n\n\nsamples-per-second of a CHOP. Each CHOP in your network has a sample rate. In contrast, the overall timeline has a Frame Rate, which is the number of frames to cook and display per second, generally your monitor display frequency, default 60.\n\n\n\nA Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that contain the CHOP channels' samples between the last and the current cook frame.\n\n\n\nA parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator. TOPs have Channel Mask, a similar feature.\n\n\n\nExporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.\n\n\n\nAn Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a python Script or GLSL Shader, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.\n\n\n\nThe location of an operator within the TouchDesigner environment, for example, /geo1/circle1, a node called circle1 in a component called geo1. The path / is called Root. This path is displayed at the top of every Pane, showing which Component's network you are currently in. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.\n\n\n\nEvery operator in TouchDesigner has a set of control Parameters that can be integer or floating point numbers, menus, binary toggles, text strings or operator paths, which determine the output of the operator.\n\n\n\nTouchDesigner is a hierarchy of components. \"root\" is the top-most network in the hierarchy. The Network Path or Path for root is simply /. A typical path is /project1/moviein1.\n\n\n\n\n\n\n\n\nRetrieved from \"https://docs.derivative.ca/index.php?title=Tablet_CHOP&oldid=24132\"",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "X Coordinate",
      "label": "X Coordinate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "xcoord - The channel name for the movement of the pen in the x direction.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Y Coordinate",
      "label": "Y Coordinate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "ycoord - The channel name for the movement of the pen in the y direction.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Pressure",
      "label": "Pressure",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "pressure - The channel name for the pressure reported by the pen.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "X Tilt",
      "label": "X Tilt",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "xtilt - The channel name for the tilt of the pen in the x direction.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Y Tilt",
      "label": "Y Tilt",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "ytilt - The channel name for the tilt of the pen in the y direction.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Finger Wheel",
      "label": "Finger Wheel",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "tanpressure - The channel name for a finger rollar wheel if available.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Thumb Wheel",
      "label": "Thumb Wheel",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "zcoord - The channel name for a thumb rollar wheel if available.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.427Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Rotation",
      "label": "Rotation",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "rotation - The channel name for the rotation the pen is reporting.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Button 1",
      "label": "Button 1",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "button1 - The channel name for the button reported as Button 1.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Button 2",
      "label": "Button 2",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "button2 - The channel name for the button reported as Button 2.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Button 3",
      "label": "Button 3",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "button3 - The channel name for the button reported as Button 3.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Button 4",
      "label": "Button 4",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "button4 - The channel name for the button reported as Button 4.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Button 5",
      "label": "Button 5",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "button5 - The channel name for the button reported as Button 5.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Active",
      "label": "Active",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "active -  - While On, the pen movement will be output from and the  will cook every frame. When set to Off it will not cook and the values will not be updated. While Playing will capture pen events only when the Timeline is playing forward.\n\n off - on - play -",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Off",
      "label": "Off",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "off - on - play -",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Sample Rate",
      "label": "Sample Rate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "rate - The sample rate of the channels, in samples per second.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Extend Left",
      "label": "Extend Left",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "left -  - The left extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope before the start of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Hold",
      "label": "Hold",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "hold - Hold the current value of the channel. slope - Continue the slope before the start of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Extend Right",
      "label": "Extend Right",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "right -  - The right extend conditions (before/after range).\n\n hold - Hold the current value of the channel. slope - Continue the slope after the end of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Hold",
      "label": "Hold",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "hold - Hold the current value of the channel. slope - Continue the slope after the end of the channel. cycle - Cycle the channel repeatedly. mirror - Cycle the channel repeatedly, mirroring every other cycle. default - Use the constant value specified in the Default Value parameter",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Default Value",
      "label": "Default Value",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "defval - The value used for the Default Value extend condition.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Time Slice",
      "label": "Time Slice",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "timeslice - Turning this on forces the channels to be \"Time Sliced\".  A  is the time between the last cook frame and the current cook frame.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Scope",
      "label": "Scope",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "scope - To determine which channels get affected, some CHOPs use a  string on the Common page.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Sample Rate Match",
      "label": "Sample Rate Match",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "srselect -  - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Resample At First Input's Rate",
      "label": "Resample At First Input's Rate",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Export Method",
      "label": "Export Method",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "exportmethod -  - This will determine how to connect the  channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked  table and references the channel via the index of the channel in the . datname - Uses the docked  table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.428Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "DAT Table by Index",
      "label": "DAT Table by Index",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "datindex - Uses the docked  table and references the channel via the index of the channel in the . datname - Uses the docked  table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.429Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Export Root",
      "label": "Export Root",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.429Z",
      "rawData": {},
      "sourceElement": null
    },
    {
      "id": null,
      "name": "Export Table",
      "label": "Export Table",
      "group": "General",
      "page": "",
      "type": "float",
      "dataType": "number",
      "style": "",
      "defaultValue": null,
      "minValue": null,
      "maxValue": null,
      "step": null,
      "menuItems": [],
      "menuLabels": [],
      "allowCustom": false,
      "maxLength": null,
      "pattern": null,
      "isArray": false,
      "arraySize": 1,
      "dimensions": 1,
      "description": "exporttable - The  used to hold the export information when using the  Table  Methods (See above).",
      "tooltip": "",
      "help": "",
      "units": "",
      "examples": [],
      "isReadOnly": false,
      "isAdvanced": false,
      "isHidden": false,
      "isAnimatable": true,
      "isExpression": false,
      "isPython": false,
      "dependsOn": [],
      "affects": [],
      "linkedTo": [],
      "expressionLanguage": "",
      "defaultExpression": "",
      "commonExpressions": [],
      "order": 0,
      "isVisible": true,
      "conditionalDisplay": null,
      "isValid": true,
      "validationErrors": [],
      "lastUpdated": "2025-08-07T07:50:10.429Z",
      "rawData": {},
      "sourceElement": null
    }
  ],
  "parameterGroups": {},
  "codeExamples": [],
  "pythonExamples": [],
  "expressions": [],
  "commonInputs": [],
  "commonOutputs": [],
  "relatedOperators": [],
  "workflowPatterns": [],
  "images": [],
  "videos": [],
  "assets": [],
  "keywords": [
    "tablet",
    "chop",
    "gets",
    "wacom",
    "values,",
    "also",
    "pressure,",
    "tilt"
  ],
  "tags": [
    "CHOP",
    "TouchDesigner",
    "Tablet CHOP"
  ],
  "searchWeight": 1,
  "contentHash": "",
  "processingDate": "2025-08-07T07:50:10.429Z",
  "processingVersion": "1.0.0",
  "isValid": true,
  "validationErrors": []
}