{ "id": "laser_chop", "name": "Laser CHOP", "displayName": "Laser CHOP", "category": "CHOP", "subcategory": "Generators", "version": "", "lastUpdated": "2025-08-07T07:50:02.871Z", "sourceFile": "C:\\Program Files\\Derivative\\TouchDesigner\\Samples\\Learn\\OfflineHelp\\https.docs.derivative.ca\\Laser_CHOP.htm", "url": "", "description": "The Laser CHOP produces channels that can drive a laser projector. It uses the points and lines of a SOP or CHOP and outputs the channels at a specified sample rate, typically 10,000 to 96,000 samples per second. The Laser CHOP gives optimal control over the movement of the reflectors of the laser projector as well as enhanced color control. In particular, it gives better control of lines being straight, end-points being not cut off or over-drawn, and eliminating tails, all adjustable using a set of parameters.", "summary": "The Laser CHOP produces channels that can drive a laser projector. It uses the points and lines of a SOP or CHOP and outputs the channels at a specified sample rate, typically 10,000 to 96,000 samples", "details": "", "usage": "", "tips": [], "warnings": [], "parameters": [ { "id": null, "name": "Active", "label": "Active", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [ "source" ], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "When disabled, the will zero out all channels.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.865Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Source OP", "label": "Source OP", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "source - - Select the source operator type for the laser image.\n\n sop - Use a as the source for the Laser image. Appart from position attributes, the 's point color attributes are used to determine the color output. chop - Use a as the source for the Laser image. The expects x and y channels and every sample will be interpreted as a point to be drawn. To draw multiple shapes, also specify an id named channel to identify each shape. All other channels will be interpreted as color channels and blanking will be applied to those. This makes it possible to drive Lasers that have more than just rgb diodes active.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "SOP", "label": "SOP", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "sop - Use a as the source for the Laser image. Appart from position attributes, the 's point color attributes are used to determine the color output. chop - Use a as the source for the Laser image. The expects x and y channels and every sample will be interpreted as a point to be drawn. To draw multiple shapes, also specify an id named channel to identify each shape. All other channels will be interpreted as color channels and blanking will be applied to those. This makes it possible to drive Lasers that have more than just rgb diodes active.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "CHOP", "label": "CHOP", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "chop - to the . The input must have x, y channels for the point positions. In addition, it also supports z, r, g, b, and id channels. The id channel is used for grouping points together as a single shape. By default when no id channel is present, each point is separate and unconnected. Additional and arbitrarily named colour channels may be added for laser projectors that accept more than just r, g, b.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Input Sample Rate", "label": "Input Sample Rate", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "inputrate - Specify the the input source will be sampled at. This can be lower than the output sample rate. If lower than the output sample rate then the output will be resampled (same as if put through a Resample ).", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Output Sample Rate", "label": "Output Sample Rate", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "outputrate - The sample rate of the , and the sample rate at which it will output to the laser. With the default 48000 samples per second and a 60fps frame rate, the Laser can output 800 position and color values per frame.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Swap Output", "label": "Swap Output", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "swap - Lets you swap the x and y axis of the output.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "X Scale", "label": "X Scale", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "xscale - Control the horizontal scale of the output.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Y Scale", "label": "Y Scale", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "yscale - Control the vertical scale of the output.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Rotate", "label": "Rotate", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "rotate - Control the rotation of the output.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.869Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Update Method", "label": "Update Method", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "Control how the Laser pulls data from its source.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "When All Points Drawn", "label": "When All Points Drawn", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "alldrawn - The Laser will read the source data once all points of the previous frame have been drawn. everyframe - The Laser will update the input every frame, no matter if it finished drawing the previous frame or not.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Frame Start Pulse", "label": "Frame Start Pulse", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "startpulse - When enabled, will insert a sample with all colors set to -1 at the beginning of the laser frame.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Vertex Order", "label": "Vertex Order", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "vertexorder - Output the points in the same order as the vertices of each polygon, instead of the order in which the points are defined in the geometry.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Step Size", "label": "Step Size", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "stepsize - The distance each x,y can change while outputing color.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Blanking Step Size", "label": "Blanking Step Size", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "bstepsize - The distance each x,y can change while not outputing color (blanking).", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Minimum Vertex Hold", "label": "Minimum Vertex Hold", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "minverthold - The minimum value of the vertex hold of a point. The value of the vertex hold of a point is calculated linearly in the range from the minimum to maximum vertex hold, based on the steepness of the angle at the point. This angle is calculated with the following three points: the previous point, the point itself, and the next point. Example: when the angle at the point is 180 degrees then the vertex hold of the point will be the minimum value.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Maximum Vertex Hold", "label": "Maximum Vertex Hold", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "maxverthold - The maximum value of the vertex hold of a point. See Minimum Hold for more details. When the angle at the point is 0 degrees, then the vertex hold will be the maximum value. If the maximum value is lower than the minimum then the maximum will be clamped upward.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Camera", "label": "Camera", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "camera - Specify the path to a Camera used to draw a from the cameras view.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Red Scale", "label": "Red Scale", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "redscale - Set the intensity of the Red .", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Green Scale", "label": "Green Scale", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "greenscale - Set the intensity of the Green .", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Blue Scale", "label": "Blue Scale", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "bluescale - Set the intensity of the Blue .", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Pre Blanking On Delay", "label": "Pre Blanking On Delay", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "preblankon - Set the time in ms the Laser should wait at a position before turning the color output off.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Post Blanking On Delay", "label": "Post Blanking On Delay", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "postblankon - Set the time in ms the Laser should wait at a position after turning the color output off.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Pre Blanking Off Delay", "label": "Pre Blanking Off Delay", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "preblankoff - Set the time in ms the Laser should wait at a position before turning the color output on.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Post Blanking Off Delay", "label": "Post Blanking Off Delay", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "postblankoff - Set the time in ms the Laser should wait at a position after turning the color output on.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Start-Point Hold Time", "label": "Start-Point Hold Time", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "starthold - Set the time in ms the Laser should wait at the first point of a new data frame before continuing on.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Color Delay", "label": "Color Delay", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "colordelay - Set the delay in ms of the color channels in the output.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Time Slice", "label": "Time Slice", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "timeslice - Turning this on forces the channels to be \"Time Sliced\". A is the time between the last cook frame and the current cook frame.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Scope", "label": "Scope", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "scope - To determine which channels get affected, some CHOPs use a string on the Common page.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Sample Rate Match", "label": "Sample Rate Match", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or \"Linear\" if the Interpolate Options are not available.\n\n first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Resample At First Input's Rate", "label": "Resample At First Input's Rate", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "first - Use rate of first input to resample others. max - Resample to the highest sample rate. min - Resample to the lowest sample rate. err - Doesn't accept conflicting sample rates.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Export Method", "label": "Export Method", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "exportmethod - - This will determine how to connect the channel to the parameter. Refer to the Export article for more information.\n\n datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.870Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "DAT Table by Index", "label": "DAT Table by Index", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "datindex - Uses the docked table and references the channel via the index of the channel in the . datname - Uses the docked table and references the channel via the name of the channel in the . autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.871Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Export Root", "label": "Export Root", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is : are relative to.", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.871Z", "rawData": {}, "sourceElement": null }, { "id": null, "name": "Export Table", "label": "Export Table", "group": "General", "page": "", "type": "float", "dataType": "number", "style": "", "defaultValue": null, "minValue": null, "maxValue": null, "step": null, "menuItems": [], "menuLabels": [], "allowCustom": false, "maxLength": null, "pattern": null, "isArray": false, "arraySize": 1, "dimensions": 1, "description": "exporttable - The used to hold the export information when using the Table Methods (See above).", "tooltip": "", "help": "", "units": "", "examples": [], "isReadOnly": false, "isAdvanced": false, "isHidden": false, "isAnimatable": true, "isExpression": false, "isPython": false, "dependsOn": [], "affects": [], "linkedTo": [], "expressionLanguage": "", "defaultExpression": "", "commonExpressions": [], "order": 0, "isVisible": true, "conditionalDisplay": null, "isValid": true, "validationErrors": [], "lastUpdated": "2025-08-07T07:50:02.871Z", "rawData": {}, "sourceElement": null } ], "parameterGroups": {}, "codeExamples": [], "pythonExamples": [], "expressions": [], "commonInputs": [], "commonOutputs": [], "relatedOperators": [], "workflowPatterns": [], "images": [], "videos": [], "assets": [], "keywords": [ "laser", "chop", "produces", "channels", "drive", "projector.", "uses", "points", "lines" ], "tags": [ "CHOP", "TouchDesigner", "Laser CHOP" ], "searchWeight": 1, "contentHash": "", "processingDate": "2025-08-07T07:50:02.871Z", "processingVersion": "1.0.0", "isValid": true, "validationErrors": [] }