[
    {
        "id": "7749888c.f75d",
        "type": "tab",
        "label": "2JCIE-BU example",
        "disabled": false,
        "info": ""
    },
    {
        "id": "37d77db0.dca38a",
        "type": "2JCIE-BU in",
        "z": "7749888c.f75d",
        "name": "",
        "messageFormat": "standard",
        "x": 270,
        "y": 500,
        "wires": [
            [
                "b6e2b1.1a283d5"
            ]
        ]
    },
    {
        "id": "6d65bf9.44c124",
        "type": "2JCIE-BU out",
        "z": "7749888c.f75d",
        "name": "",
        "x": 460,
        "y": 240,
        "wires": [
            [
                "81d013b1.20c21"
            ]
        ]
    },
    {
        "id": "8e7d04ce.bf3af8",
        "type": "serial in",
        "z": "7749888c.f75d",
        "x": 130,
        "y": 440,
        "wires": [
            [
                "37d77db0.dca38a"
            ]
        ]
    },
    {
        "id": "b6e2b1.1a283d5",
        "type": "debug",
        "z": "7749888c.f75d",
        "name": "Dump command response message",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "true",
        "targetType": "full",
        "x": 430,
        "y": 560,
        "wires": []
    },
    {
        "id": "81d013b1.20c21",
        "type": "serial out",
        "z": "7749888c.f75d",
        "x": 510,
        "y": 380,
        "wires": []
    },
    {
        "id": "d22531e0.b586a8",
        "type": "inject",
        "z": "7749888c.f75d",
        "name": "",
        "topic": "getLatestSensorData",
        "payload": "",
        "payloadType": "str",
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "x": 160,
        "y": 120,
        "wires": [
            [
                "6d65bf9.44c124"
            ]
        ]
    },
    {
        "id": "16ec33df.91483c",
        "type": "inject",
        "z": "7749888c.f75d",
        "name": "",
        "topic": "getMountingOrientation",
        "payload": "",
        "payloadType": "str",
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "x": 170,
        "y": 180,
        "wires": [
            [
                "6d65bf9.44c124"
            ]
        ]
    },
    {
        "id": "b132286.29adc58",
        "type": "inject",
        "z": "7749888c.f75d",
        "name": "",
        "topic": "getDeviceInformation",
        "payload": "",
        "payloadType": "str",
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "x": 160,
        "y": 240,
        "wires": [
            [
                "6d65bf9.44c124"
            ]
        ]
    },
    {
        "id": "910fd720.c3183",
        "type": "inject",
        "z": "7749888c.f75d",
        "name": "set LED Color (Light Blue)",
        "topic": "setLED",
        "payload": "{\"displayRule\":\"ON\",\"color\":\"#5899f3\"}",
        "payloadType": "json",
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "x": 170,
        "y": 300,
        "wires": [
            [
                "6d65bf9.44c124"
            ]
        ]
    },
    {
        "id": "a2113dd4.d0df9",
        "type": "inject",
        "z": "7749888c.f75d",
        "name": "set LED Color Rule (Temperature)",
        "topic": "setLED",
        "payload": "{\"displayRule\":\"Temperature\"}",
        "payloadType": "json",
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "x": 190,
        "y": 360,
        "wires": [
            [
                "6d65bf9.44c124"
            ]
        ]
    },
    {
        "id": "c433be75.bb7a58",
        "type": "comment",
        "z": "7749888c.f75d",
        "name": "Configure a serial config node prior to start this flow!",
        "info": "### How to set up the example flow\n\n1. Add or choose a serial port in the `serial in` node and the `serial out` node (You have to set the same serial port for the both nodes)\n2. Deploy the flow.\n3. Click/tap an iject node and a response message object will appear on a debug tab.",
        "x": 250,
        "y": 60,
        "wires": []
    }
]