/**
 * Represents the available commands for various devices such as the Motherboard and Tindeq Progressor.
 */
export interface Commands {
    /**
     * Starts a weight measurement on the device.
     * Used to begin collecting weight or force data.
     */
    START_WEIGHT_MEAS?: string;
    /**
     * Stops the current weight measurement on the device.
     * Used to end the data collection.
     */
    STOP_WEIGHT_MEAS?: string;
    /**
     * Puts the device to sleep or in a low-power mode.
     * The format can be a string or a number depending on the device.
     */
    SLEEP?: number | string;
    /**
     * Retrieves the serial number of the device.
     * This command fetches the unique identifier assigned by the manufacturer.
     */
    GET_SERIAL?: string;
    /**
     * Retrieves textual information from the device.
     * May include readable data.
     */
    GET_TEXT?: string;
    /**
     * Starts or stops a debug data stream from the device.
     * Used for diagnostic purposes or to monitor real-time data.
     */
    DEBUG_STREAM?: string;
    /**
     * Retrieves calibration data from the device.
     * Used to ensure accurate measurements by applying calibration points.
     */
    GET_CALIBRATION?: string;
    /**
     * Sets the Force Board into Quick Start mode.
     * In this mode, data transmission starts when force exceeds the threshold
     * and stops when force drops below the threshold.
     */
    START_QUICK_MEAS?: string;
    /**
     * Tares the scale, zeroing the current weight measurement.
     * Used to reset the baseline for weight data.
     */
    TARE_SCALE?: string;
    /**
     * Starts measuring the peak rate of force development (RFD).
     * Captures how quickly force is applied over time.
     */
    START_PEAK_RFD_MEAS?: string;
    /**
     * Starts measuring a series of peak RFD measurements.
     * This captures multiple RFD data points over a period of time.
     */
    START_PEAK_RFD_MEAS_SERIES?: string;
    /**
     * Adds a calibration point to the device.
     * Used to improve the accuracy of future measurements.
     */
    ADD_CALIB_POINT?: string;
    /**
     * Saves the current calibration settings to the device.
     * Ensures the device remembers the calibration for future sessions.
     */
    SAVE_CALIB?: string;
    /**
     * Retrieves the firmware version of the device.
     * Useful for ensuring compatibility and tracking updates.
     */
    GET_FW_VERSION?: string;
    /**
     * Retrieves error information from the device.
     * Provides details on any faults or issues that occurred during operation.
     */
    GET_ERR_INFO?: string;
    /**
     * Clears the error information on the device.
     * Used to reset error logs after troubleshooting or repair.
     */
    CLR_ERR_INFO?: string;
    /**
     * Retrieves the battery voltage level of the device.
     * Provides insight into the device's remaining battery power.
     */
    GET_BATT_VLTG?: string;
}