{
  "type": "machine",
  "setting_id": "GM_CREALITY_022",
  "name": "Creality K1 0.8 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_creality_common",
  "printer_model": "Creality K1 Max",
  "gcode_flavor": "klipper",
  "default_print_profile": "0.40mm Standard @Creality K1 0.8 nozzle",
  "nozzle_diameter": [
      "0.8"
  ],
  "printer_variant": "0.8",
  "printable_area": [
      "0x0",
      "300x0",
      "300x300",
      "0x300"
  ],
  "printable_height": "300",
  "nozzle_type": "hardened_steel",
  "auxiliary_fan": "1",
  "support_air_filtration": "1",
  "support_multi_bed_types": "1",
  "machine_max_acceleration_e": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_extruding": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_retracting": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_travel": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_x": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_y": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_z": [
      "500",
      "500"
  ],
  "machine_max_speed_e": [
      "100",
      "100"
  ],
  "machine_max_speed_x": [
      "800",
      "800"
  ],
  "machine_max_speed_y": [
      "800",
      "800"
  ],
  "machine_max_speed_z": [
      "20",
      "20"
  ],
  "machine_max_jerk_e": [
      "2.5",
      "2.5"
  ],
  "machine_max_jerk_x": [
      "12",
      "12"
  ],
  "machine_max_jerk_y": [
      "12",
      "12"
  ],
  "machine_max_jerk_z": [
      "2",
      "2"
  ],
  "max_layer_height": [
      "0.5"
  ],
  "min_layer_height": [
      "0.08"
  ],
  "printer_settings_id": "Creality",
  "retraction_minimum_travel": [
      "2"
  ],
  "retract_before_wipe": [
      "0%"
  ],
  "retraction_length": [
      "0.5"
  ],
  "retract_length_toolchange": [
      "1"
  ],
  "retraction_speed": [
      "40"
  ],
  "deretraction_speed": [
      "40"
  ],
  "extruder_clearance_height_to_lid": "101",
  "extruder_clearance_height_to_rod": "45",
  "extruder_clearance_dist_to_rod": "45",
  "z_hop": [
      "0.2"
  ],
  "wipe_distance": [
      "2"
  ],
  "single_extruder_multi_material": "1",
  "manual_filament_change": "1",
  "change_filament_gcode": "PAUSE",
  "machine_pause_gcode": "PAUSE",
	"default_filament_profile": [
		"Generic PLA @Creality"
	],
  "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
  "machine_end_gcode": "END_PRINT",
  "scan_first_layer": "0",
  "thumbnails": [
      "100x100",
      "320x320"
  ]
}