# Changelog

## v7.5.3 - 2025-03-27
- Fixed crash on startup for node 20 (unexpected token 'with')

## v7.5.2 - 2025-03-27
- Update plugin name to homebridge tado

## v7.5.1 - 2025-03-26
- Fixed package.json required node version

## v7.5.0 - 2025-03-25
- Converted package to ES module
- Activated eslint
- Updated dependencies
- Added account name to authentication url message
- Dropped support for node 18 due to got

## v7.4.3 - 2025-03-19
- Updated fakegato-history for Homebridge v2.0 support
- Removed workaround for missing perms enum values

## v7.4.2 - 2025-03-16
- Updated config.schema.json

## v7.4.1 - 2025-03-14
- Updated changelog

## v7.4.0 - 2025-03-14
- Implemented the new authentication workflow for the tado° REST API based on their [official instructions](https://support.tado.com/en/articles/8565472-how-do-i-authenticate-to-access-the-rest-api)
- Added full support for Homebridge v2.0 (it is also shown as compatible when using Homebridge v1.X)
- Updated all dependencies to their latest version
- Added new authentication workflow to config-ui
- Fixed an issue that caused HomeKit from pairing with the bridge (Error: Accessory out of compliance)
- Fixed an issue where the plugin crashed after startup due to a type error after upgrading got
- Removed AirQuality feature [homebridge-tado-platform/issues/152#issuecomment-2708942491](https://github.com/seydx/homebridge-tado-platform/issues/152#issuecomment-2708942491)
- Fixed an issue where the current temperature has been set to the target temperature after changing the target temperature through Apple Home
- Fixed an issue that caused Apple Home from pairing with the bridge (Error: Accessory out of compliance)
- Fixed an issue where the plugin crashed after startup due to errors after upgrading got
- Fixed minor bugs

## v6.0.14 - 2021-05-19
- Fixed an issue where the thermostat displayed wrong room temperature due to wrong celsius/fahrenheit calculation
- Bump dependencies

## v6.0.13 - 2021-05-16
- Fix [#79](https://github.com/SeydX/homebridge-tado-platform/issues/79), [#80](https://github.com/SeydX/homebridge-tado-platform/issues/80)
- Minor bugfixes and improvements

## v6.0.12 - 2021-04-26
- Fixed a bug with windowSwitchAccessory
- Less error messages

## v6.0.11 - 2021-03-22
- Fixed a bug with an empty temperature value which threw an error during setting up with config-ui-x
- Fixed minValue for LightSensor
- Fixed a bug with "easyMode" enabled heater

## v6.0.10 - 2021-03-22
- Changed dummySwitch to stateful

## v6.0.9 - 2021-03-22
- Added "Dummy Switch" option to Central Switch
- Added new accessory type option (LightSensor) to Solar Intensity Accessory
- Added new mode (CUSTOM) to HOT_WATER devices
- Fixed current state of HeaterCooler if temperature is reached
- Fixed AUTO mode for HOT_WATER devices
- Bugfixes
- Bump deps

## v6.0.8 - 2021-03-19
- Bugfixes

## v6.0.7 - 2021-03-18
- Bugfixes

## v6.0.6 - 2021-03-16
- Added minValue, maxValue, minStep options to config
- Fixed target temperature for HOT_WATER if power = "ON"
- Other little bugfixes & improvements

## v6.0.5 - 2021-03-16
- Hot Water auto mode bugfixes

## v6.0.4 - 2021-03-16
- Removed "CoolingThresholdTemperature" from HeaterCooler Accessory
- Changed target state to auto when switching on HeaterCooler if mode = "AUTO"

## v6.0.3 - 2021-03-16
- Removed unnecessary log

## v6.0.2 - 2021-03-16
- Fixed zoneOverlay (temperature)

## v6.0.1 - 2021-03-15
- Fixed a bug with faucet accessory appearing as air quality sensor
- Fixed a bug for HOT_WATER devices without temperature support
- Improvements

**Note:**

Hot water devices show 0° when they are first started in HomeKit if they are in "OFF" mode. The reason for this is that in "OFF" mode there is no temperature value in the API. When you turn on the device, the plugin saves the value for the further use case.


**IMPORTANT:**

If you previously used your "HOT_WATER" device/zone as a faucet, then disable the zone after the update and restart Homebridge pls. After the restart, you can enable the zone with the faucet again.


## v6.0.0 - 2021-03-14


**<u>NOTE:</u>** Updating from **<= v5.x** to **v6.x** will crash your homebridge, please **REMOVE** the old version first and check also the new [example-config.json](https://github.com/SeydX/homebridge-tado-platform/blob/master/example-config.json) 

- Config UI X support (config.schema.json)
- Custom UI
- Support for non config ui x user
- Auto-fill config for non config ui x user
- HB 1.3 support
  - Support new onGet/onSet event
- Refactored code
- Multiple tado accounts
  - Possibility to control multiple homes
- Customizable temperature unit via HomeKit
- Customizable Modes (AUTO | HEAT | COOL | OFF) or (ON | OFF)
- Deactivatable battery indicator (support for old gen thermostats)
- Customizable zone termination, separate for each zone
- Delay Switch
  - Delay as switch characteristic with adjustable timer characteristic for automations
  - Auto turn off options
- Separate humidity sensor
- Separate temperature sensor
- Boiler with adjustable accessory type
  - Switch (if no temperature is supported) 
  - Faucet (if no temperature supported)
  - HeaterCooler (if temperature supported)
- Grouped Central Switch with custom characteristics 
  - Overall heat in h for day/month/year
  - Thermostat/Boiler states (manual, auto, off)
  - Boost trigger switch
  - Resume shedule trigger switch
  - Turn off trigger switch
- OpenWindow
  - Grouped Switch: Enables open window and trigger open window detection
  - Contact: Read-only open window state as contact sensor
- Presence Lock
  - As Security System
  - As Grouped Switch Accessory 
- Air Quality
  - Weather
  - Zones
- FakeGato
  - Thermostats
  - HeaterCooler
  - Temperature sensors
  - Humidity sensors
  - Contact sensors (window)
- Telegram
  - Presence
  - OpenWindow
- Child Lock Switches as Grouped Switch Accessory
- Better error handling

## v5.1.5 - 2019-04-27
- Refactored HOTWATER Accessory (*)
- Bugfixes
- Cleanup code


## v5.1.4 - 2019-04-25
- Bugfixes


## v5.1.2 - 2019-04-22
- [NEW] Added Valve (Faucet Type) for Hotwater without temp adjustment possibility
- Bugfixes
- Code Cleanup


## v5.0.5 - 2019-04-22
- Code cleanup
- Bugfixes


## v5.0.3 - 2019-04-17
- Bugfixes
- Added new parameter into config.json (overrideMode) to set up the mode after temperature changement (manual or auto)
- Cleanup code

## v5.0.0 - 
- Initial release