import * as pulumi from "@pulumi/pulumi"; import { input as inputs, output as outputs } from "../types"; /** * Manages CSS cluster resource within HuaweiCloud * * ## Example Usage * ### create a cluster * * ```typescript * import * as pulumi from "@pulumi/pulumi"; * import * as pulumi from "@huaweicloudos/pulumi"; * * const config = new pulumi.Config(); * const availabilityZone = config.requireObject("availabilityZone"); * const vpcId = config.requireObject("vpcId"); * const subnetId = config.requireObject("subnetId"); * const secgroupId = config.requireObject("secgroupId"); * const cluster = new huaweicloud.css.Cluster("cluster", { * engineVersion: "7.10.2", * essNodeConfig: { * flavor: "ess.spec-4u8g", * instanceNumber: 1, * volume: { * volumeType: "HIGH", * size: 40, * }, * }, * availabilityZone: availabilityZone, * vpcId: vpcId, * subnetId: subnetId, * securityGroupId: secgroupId, * }); * ``` * ### create a cluster with ess-data node and master node * * ```typescript * import * as pulumi from "@pulumi/pulumi"; * import * as pulumi from "@huaweicloudos/pulumi"; * * const config = new pulumi.Config(); * const availabilityZone = config.requireObject("availabilityZone"); * const vpcId = config.requireObject("vpcId"); * const subnetId = config.requireObject("subnetId"); * const secgroupId = config.requireObject("secgroupId"); * const cluster = new huaweicloud.css.Cluster("cluster", { * engineVersion: "7.10.2", * essNodeConfig: { * flavor: "ess.spec-4u8g", * instanceNumber: 1, * volume: { * volumeType: "HIGH", * size: 40, * }, * }, * masterNodeConfig: { * flavor: "ess.spec-4u8g", * instanceNumber: 3, * volume: { * volumeType: "HIGH", * size: 40, * }, * }, * availabilityZone: availabilityZone, * vpcId: vpcId, * subnetId: subnetId, * securityGroupId: secgroupId, * }); * ``` * ### create a cluster with ess-data node and cold node use local disk * * ```typescript * import * as pulumi from "@pulumi/pulumi"; * import * as pulumi from "@huaweicloudos/pulumi"; * * const config = new pulumi.Config(); * const availabilityZone = config.requireObject("availabilityZone"); * const vpcId = config.requireObject("vpcId"); * const subnetId = config.requireObject("subnetId"); * const secgroupId = config.requireObject("secgroupId"); * const cluster = new huaweicloud.css.Cluster("cluster", { * engineVersion: "7.10.2", * essNodeConfig: { * flavor: "ess.spec-ds.xlarge.8", * instanceNumber: 1, * }, * coldNodeConfig: { * flavor: "ess.spec-ds.2xlarge.8", * instanceNumber: 2, * }, * availabilityZone: availabilityZone, * vpcId: vpcId, * subnetId: subnetId, * securityGroupId: secgroupId, * }); * ``` * * ## Import * * The CSS cluster can be imported by `id`, e.g. bash * * ```sh * $ pulumi import huaweicloud:Css/cluster:Cluster test * ``` */ export declare class Cluster extends pulumi.CustomResource { /** * Get an existing Cluster resource's state with the given name, ID, and optional extra * properties used to qualify the lookup. * * @param name The _unique_ name of the resulting resource. * @param id The _unique_ provider ID of the resource to lookup. * @param state Any extra arguments used during the lookup. * @param opts Optional settings to control the behavior of the CustomResource. */ static get(name: string, id: pulumi.Input, state?: ClusterState, opts?: pulumi.CustomResourceOptions): Cluster; /** * Returns true if the given object is an instance of Cluster. This is designed to work even * when multiple copies of the Pulumi SDK have been loaded into the same process. */ static isInstance(obj: any): obj is Cluster; /** * Specifies whether auto renew is enabled. * The valid values are **true** and **false**, defaults to **false**. */ readonly autoRenew: pulumi.Output; /** * Specifies the availability zone name. * Separate multiple AZs with commas (,), for example, az1,az2. AZs must be unique. The number of nodes must be greater * than or equal to the number of AZs. If the number of nodes is a multiple of the number of AZs, the nodes are evenly * distributed to each AZ. If the number of nodes is not a multiple of the number of AZs, the absolute difference * between node quantity in any two AZs is **1** at most. */ readonly availabilityZone: pulumi.Output; /** * Whether the snapshot function is enabled. */ readonly backupAvailable: pulumi.Output; /** * Specifies the advanced backup policy. Structure is documented below. */ readonly backupStrategy: pulumi.Output; /** * The resource ID of bandwidth. */ readonly bandwidthResourceId: pulumi.Output; /** * Specifies the charging mode of the cluster. * Valid values are **prePaid** and **postPaid**, defaults to **postPaid**. */ readonly chargingMode: pulumi.Output; /** * Specifies the config of client node. * The clientNodeConfig structure is documented below. */ readonly clientNodeConfig: pulumi.Output; /** * Specifies the config of cold data node. * The coldNodeConfig structure is documented below. */ readonly coldNodeConfig: pulumi.Output; /** * schema: Deprecated; use created_at instead */ readonly created: pulumi.Output; /** * Time when a cluster is created. The format is ISO8601: CCYY-MM-DDThh:mm:ss. */ readonly createdAt: pulumi.Output; /** * Whether disks are encrypted. */ readonly diskEncrypted: pulumi.Output; readonly enableForceNew: pulumi.Output; /** * The IP address and port number. */ readonly endpoint: pulumi.Output; /** * Specifies the engine type. The valid value can be **elasticsearch** or **opensearch**. * Defaults to **elasticsearch**. Changing this parameter will create a new resource. */ readonly engineType: pulumi.Output; /** * Specifies the engine version. * For details, see [Supported Cluster Versions](https://support.huaweicloud.com/intl/en-us/api-css/css_03_0056.html). */ readonly engineVersion: pulumi.Output; /** * Specifies the enterprise project id of the css cluster, The value **0** * indicates the default enterprise project. */ readonly enterpriseProjectId: pulumi.Output; /** * Specifies the config of data node. * The essNodeConfig structure is documented below. */ readonly essNodeConfig: pulumi.Output; /** * @deprecated please use ess_node_config.instance_number instead */ readonly expectNodeNum: pulumi.Output; /** * Specifies whether to enable HTTPS. Defaults to **false**. * When `httpsEnabled` is set to **true**, the `securityMode` needs to be set to **true**. * Changing this parameter will create a new resource. */ readonly httpsEnabled: pulumi.Output; /** * Whether a cluster is billed on the yearly/monthly mode. */ readonly isPeriod: pulumi.Output; /** * Specifies Kibana public network access information. * This parameter is valid only when securityMode is set to **true**. * The kibanaPublicAccess structure is documented below. */ readonly kibanaPublicAccess: pulumi.Output; /** * Specifies the config of master node. * The masterNodeConfig structure is documented below. */ readonly masterNodeConfig: pulumi.Output; /** * Specifies the cluster name. It contains `4` to `32` characters. * Only letters, digits, hyphens (-), and underscores (_) are allowed. The value must start with a letter. * Changing this parameter will create a new resource. */ readonly name: pulumi.Output; /** * @deprecated please use ess_node_config instead */ readonly nodeConfig: pulumi.Output; /** * List of node objects. * The nodes structure is documented below. */ readonly nodes: pulumi.Output; /** * Specifies the password of the cluster administrator in security mode. * This parameter is mandatory only when `securityMode` is set to true. * The administrator password must meet the following requirements: * + The password can contain 8 to 32 characters. * + The password must contain at least 3 of the following character types: uppercase letters, lowercase letters, digits, * and special characters (~!@#$%^&*()-_=+\\|[{}];:,<.>/?). */ readonly password: pulumi.Output; /** * Specifies the charging period of the instance. * If `periodUnit` is set to **month**, the value ranges from `1` to `9`. * If `periodUnit` is set to **year**, the value ranges from `1` to `9`. */ readonly period: pulumi.Output; /** * Specifies the charging period unit of the instance. * Valid values are **month** and **year**. */ readonly periodUnit: pulumi.Output; /** * Specifies the public network access information. * The publicAccess structure is documented below. */ readonly publicAccess: pulumi.Output; /** * Specifies the region in which to create the cluster resource. If omitted, the * provider-level region will be used. Changing this creates a new cluster resource. */ readonly region: pulumi.Output; /** * Specifies the security group ID. */ readonly securityGroupId: pulumi.Output; /** * Specifies whether to enable authentication. * The value can be **true** or **false**. Authentication is disabled by default. * + **true:** Authentication is enabled for the cluster. * + **false:** Authentication is disabled for the cluster. */ readonly securityMode: pulumi.Output; /** * Instance status. */ readonly status: pulumi.Output; /** * Specifies the Subnet ID. * Changing this parameter will create a new resource. */ readonly subnetId: pulumi.Output; /** * The key/value pairs to associate with the cluster. */ readonly tags: pulumi.Output<{ [key: string]: string; } | undefined>; /** * Time when a cluster is updated. The format is ISO8601: CCYY-MM-DDThh:mm:ss. */ readonly updatedAt: pulumi.Output; /** * Specifies the VPC ID. * Changing this parameter will create a new resource. */ readonly vpcId: pulumi.Output; /** * Specifies the VPC endpoint service information. * The vpcepEndpoint structure is documented below. */ readonly vpcepEndpoint: pulumi.Output; /** * The VPC endpoint service ID. */ readonly vpcepEndpointId: pulumi.Output; /** * The private IP address of VPC endpoint service. */ readonly vpcepIp: pulumi.Output; /** * Create a Cluster resource with the given unique name, arguments, and options. * * @param name The _unique_ name of the resource. * @param args The arguments to use to populate this resource's properties. * @param opts A bag of options that control this resource's behavior. */ constructor(name: string, args: ClusterArgs, opts?: pulumi.CustomResourceOptions); } /** * Input properties used for looking up and filtering Cluster resources. */ export interface ClusterState { /** * Specifies whether auto renew is enabled. * The valid values are **true** and **false**, defaults to **false**. */ autoRenew?: pulumi.Input; /** * Specifies the availability zone name. * Separate multiple AZs with commas (,), for example, az1,az2. AZs must be unique. The number of nodes must be greater * than or equal to the number of AZs. If the number of nodes is a multiple of the number of AZs, the nodes are evenly * distributed to each AZ. If the number of nodes is not a multiple of the number of AZs, the absolute difference * between node quantity in any two AZs is **1** at most. */ availabilityZone?: pulumi.Input; /** * Whether the snapshot function is enabled. */ backupAvailable?: pulumi.Input; /** * Specifies the advanced backup policy. Structure is documented below. */ backupStrategy?: pulumi.Input; /** * The resource ID of bandwidth. */ bandwidthResourceId?: pulumi.Input; /** * Specifies the charging mode of the cluster. * Valid values are **prePaid** and **postPaid**, defaults to **postPaid**. */ chargingMode?: pulumi.Input; /** * Specifies the config of client node. * The clientNodeConfig structure is documented below. */ clientNodeConfig?: pulumi.Input; /** * Specifies the config of cold data node. * The coldNodeConfig structure is documented below. */ coldNodeConfig?: pulumi.Input; /** * schema: Deprecated; use created_at instead */ created?: pulumi.Input; /** * Time when a cluster is created. The format is ISO8601: CCYY-MM-DDThh:mm:ss. */ createdAt?: pulumi.Input; /** * Whether disks are encrypted. */ diskEncrypted?: pulumi.Input; enableForceNew?: pulumi.Input; /** * The IP address and port number. */ endpoint?: pulumi.Input; /** * Specifies the engine type. The valid value can be **elasticsearch** or **opensearch**. * Defaults to **elasticsearch**. Changing this parameter will create a new resource. */ engineType?: pulumi.Input; /** * Specifies the engine version. * For details, see [Supported Cluster Versions](https://support.huaweicloud.com/intl/en-us/api-css/css_03_0056.html). */ engineVersion?: pulumi.Input; /** * Specifies the enterprise project id of the css cluster, The value **0** * indicates the default enterprise project. */ enterpriseProjectId?: pulumi.Input; /** * Specifies the config of data node. * The essNodeConfig structure is documented below. */ essNodeConfig?: pulumi.Input; /** * @deprecated please use ess_node_config.instance_number instead */ expectNodeNum?: pulumi.Input; /** * Specifies whether to enable HTTPS. Defaults to **false**. * When `httpsEnabled` is set to **true**, the `securityMode` needs to be set to **true**. * Changing this parameter will create a new resource. */ httpsEnabled?: pulumi.Input; /** * Whether a cluster is billed on the yearly/monthly mode. */ isPeriod?: pulumi.Input; /** * Specifies Kibana public network access information. * This parameter is valid only when securityMode is set to **true**. * The kibanaPublicAccess structure is documented below. */ kibanaPublicAccess?: pulumi.Input; /** * Specifies the config of master node. * The masterNodeConfig structure is documented below. */ masterNodeConfig?: pulumi.Input; /** * Specifies the cluster name. It contains `4` to `32` characters. * Only letters, digits, hyphens (-), and underscores (_) are allowed. The value must start with a letter. * Changing this parameter will create a new resource. */ name?: pulumi.Input; /** * @deprecated please use ess_node_config instead */ nodeConfig?: pulumi.Input; /** * List of node objects. * The nodes structure is documented below. */ nodes?: pulumi.Input[]>; /** * Specifies the password of the cluster administrator in security mode. * This parameter is mandatory only when `securityMode` is set to true. * The administrator password must meet the following requirements: * + The password can contain 8 to 32 characters. * + The password must contain at least 3 of the following character types: uppercase letters, lowercase letters, digits, * and special characters (~!@#$%^&*()-_=+\\|[{}];:,<.>/?). */ password?: pulumi.Input; /** * Specifies the charging period of the instance. * If `periodUnit` is set to **month**, the value ranges from `1` to `9`. * If `periodUnit` is set to **year**, the value ranges from `1` to `9`. */ period?: pulumi.Input; /** * Specifies the charging period unit of the instance. * Valid values are **month** and **year**. */ periodUnit?: pulumi.Input; /** * Specifies the public network access information. * The publicAccess structure is documented below. */ publicAccess?: pulumi.Input; /** * Specifies the region in which to create the cluster resource. If omitted, the * provider-level region will be used. Changing this creates a new cluster resource. */ region?: pulumi.Input; /** * Specifies the security group ID. */ securityGroupId?: pulumi.Input; /** * Specifies whether to enable authentication. * The value can be **true** or **false**. Authentication is disabled by default. * + **true:** Authentication is enabled for the cluster. * + **false:** Authentication is disabled for the cluster. */ securityMode?: pulumi.Input; /** * Instance status. */ status?: pulumi.Input; /** * Specifies the Subnet ID. * Changing this parameter will create a new resource. */ subnetId?: pulumi.Input; /** * The key/value pairs to associate with the cluster. */ tags?: pulumi.Input<{ [key: string]: pulumi.Input; }>; /** * Time when a cluster is updated. The format is ISO8601: CCYY-MM-DDThh:mm:ss. */ updatedAt?: pulumi.Input; /** * Specifies the VPC ID. * Changing this parameter will create a new resource. */ vpcId?: pulumi.Input; /** * Specifies the VPC endpoint service information. * The vpcepEndpoint structure is documented below. */ vpcepEndpoint?: pulumi.Input; /** * The VPC endpoint service ID. */ vpcepEndpointId?: pulumi.Input; /** * The private IP address of VPC endpoint service. */ vpcepIp?: pulumi.Input; } /** * The set of arguments for constructing a Cluster resource. */ export interface ClusterArgs { /** * Specifies whether auto renew is enabled. * The valid values are **true** and **false**, defaults to **false**. */ autoRenew?: pulumi.Input; /** * Specifies the availability zone name. * Separate multiple AZs with commas (,), for example, az1,az2. AZs must be unique. The number of nodes must be greater * than or equal to the number of AZs. If the number of nodes is a multiple of the number of AZs, the nodes are evenly * distributed to each AZ. If the number of nodes is not a multiple of the number of AZs, the absolute difference * between node quantity in any two AZs is **1** at most. */ availabilityZone?: pulumi.Input; /** * Specifies the advanced backup policy. Structure is documented below. */ backupStrategy?: pulumi.Input; /** * Specifies the charging mode of the cluster. * Valid values are **prePaid** and **postPaid**, defaults to **postPaid**. */ chargingMode?: pulumi.Input; /** * Specifies the config of client node. * The clientNodeConfig structure is documented below. */ clientNodeConfig?: pulumi.Input; /** * Specifies the config of cold data node. * The coldNodeConfig structure is documented below. */ coldNodeConfig?: pulumi.Input; enableForceNew?: pulumi.Input; /** * Specifies the engine type. The valid value can be **elasticsearch** or **opensearch**. * Defaults to **elasticsearch**. Changing this parameter will create a new resource. */ engineType?: pulumi.Input; /** * Specifies the engine version. * For details, see [Supported Cluster Versions](https://support.huaweicloud.com/intl/en-us/api-css/css_03_0056.html). */ engineVersion: pulumi.Input; /** * Specifies the enterprise project id of the css cluster, The value **0** * indicates the default enterprise project. */ enterpriseProjectId?: pulumi.Input; /** * Specifies the config of data node. * The essNodeConfig structure is documented below. */ essNodeConfig?: pulumi.Input; /** * @deprecated please use ess_node_config.instance_number instead */ expectNodeNum?: pulumi.Input; /** * Specifies whether to enable HTTPS. Defaults to **false**. * When `httpsEnabled` is set to **true**, the `securityMode` needs to be set to **true**. * Changing this parameter will create a new resource. */ httpsEnabled?: pulumi.Input; /** * Specifies Kibana public network access information. * This parameter is valid only when securityMode is set to **true**. * The kibanaPublicAccess structure is documented below. */ kibanaPublicAccess?: pulumi.Input; /** * Specifies the config of master node. * The masterNodeConfig structure is documented below. */ masterNodeConfig?: pulumi.Input; /** * Specifies the cluster name. It contains `4` to `32` characters. * Only letters, digits, hyphens (-), and underscores (_) are allowed. The value must start with a letter. * Changing this parameter will create a new resource. */ name?: pulumi.Input; /** * @deprecated please use ess_node_config instead */ nodeConfig?: pulumi.Input; /** * Specifies the password of the cluster administrator in security mode. * This parameter is mandatory only when `securityMode` is set to true. * The administrator password must meet the following requirements: * + The password can contain 8 to 32 characters. * + The password must contain at least 3 of the following character types: uppercase letters, lowercase letters, digits, * and special characters (~!@#$%^&*()-_=+\\|[{}];:,<.>/?). */ password?: pulumi.Input; /** * Specifies the charging period of the instance. * If `periodUnit` is set to **month**, the value ranges from `1` to `9`. * If `periodUnit` is set to **year**, the value ranges from `1` to `9`. */ period?: pulumi.Input; /** * Specifies the charging period unit of the instance. * Valid values are **month** and **year**. */ periodUnit?: pulumi.Input; /** * Specifies the public network access information. * The publicAccess structure is documented below. */ publicAccess?: pulumi.Input; /** * Specifies the region in which to create the cluster resource. If omitted, the * provider-level region will be used. Changing this creates a new cluster resource. */ region?: pulumi.Input; /** * Specifies the security group ID. */ securityGroupId?: pulumi.Input; /** * Specifies whether to enable authentication. * The value can be **true** or **false**. Authentication is disabled by default. * + **true:** Authentication is enabled for the cluster. * + **false:** Authentication is disabled for the cluster. */ securityMode?: pulumi.Input; /** * Specifies the Subnet ID. * Changing this parameter will create a new resource. */ subnetId?: pulumi.Input; /** * The key/value pairs to associate with the cluster. */ tags?: pulumi.Input<{ [key: string]: pulumi.Input; }>; /** * Specifies the VPC ID. * Changing this parameter will create a new resource. */ vpcId?: pulumi.Input; /** * Specifies the VPC endpoint service information. * The vpcepEndpoint structure is documented below. */ vpcepEndpoint?: pulumi.Input; }