// // HS2S.h // iHealthSDKStatic // // Created by jing on 2019/5/8. // Copyright © 2019 ihealthSDK. All rights reserved. // #import #import "HSMacroFile.h" NS_ASSUME_NONNULL_BEGIN @interface HS2S : NSObject @property (strong, nonatomic) NSString *serialNumber; @property (strong, nonatomic) NSString *currentUUID; @property (nonatomic,strong) NSNumber *hs2sDeviceFlag; /** *Get HS2S DeviceInfo (After the HS2S device is successfully connected, the interface must be called to synchronize the device time. Otherwise, the offline data measurement time error will be caused) * @param deviceInfo Contains device IDPS info(FirmwareVersion,HardwareVersion,Manufacture,ModelNumber,ProtocolString,SerialNumber),user count ,HS2S current unit(1:Kg,2:LB,3:ST),battery * Example: * { Battary = 70; DeviceName = HS2S; FirmwareVersion = "0.5.4"; HardwareVersion = "1.0.0"; Manufacture = iHealth; ModelNumber = "HS2S 11070"; ProtocolString = "com.jiuan.BFSV22"; SerialNumber = 004D320CA04D; Unit = 1; UserCount = 1; * } * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SDeviceInfo:(DisposeHS2SDeviceInfo)deviceInfo DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** *Get HS2S battery * @param battary HS2Sbattery [Range:0～100]% * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SBattery:(DisposeHS2SBatteryBlock)battary DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * SetUnit * Import parameter: * @param tempUnit -Unit displayed on HS2S: HSUnit_Kg、HSUnit_LB、HSUnit_ST。 * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandSetHS2SUnit:(HSUnit)tempUnit result:(DisposeHS2SResult)result DisposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Get HS2S UserInfo * Return parameters: * @param userInfo NSDictionary type,contains: UserCount and UserInfo * Example: * { UserCount = 1; UserInfo =( { "UserInfo_Age" = 20; "UserInfo_Height" = 100; "UserInfo_CreatTS" = 1558406503; //User creat time "UserInfo_ID" = <69486561 6c746831 32333435 36373839>; "UserInfo_ImpedanceMark" = 1; //0 Don't measure 1 Measure "UserInfo_SEX" = 1; //0 female 1 male, "UserInfo_Weight" = "79.5"; "UserInfo_Fitness" = 1; //0:Don't fitness 1:fitness } ); * } * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SUserInfo:(DisposeHS2SUserInfo)userInfo DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Create or Update HS2S UserInfo (The HS2S device only supports the creation of a maximum of 8 users) * Import parameter: * @param user (user information must be entered in accordance with the reference range, otherwise it may be impossible to measure the accurate body fat information) * contains: * hs2SUserID:NSData type,The user ID must be 16 bytes or the user creation fails, * createTS:NSInteger type,The unit of time is seconds , * weight:NSNumber type,range:20-150kg, * age:NSNumber type,range:18-99 years, * height:NSNumber type,range:90-220cm * sex:0 female 1 male, * impedanceMark: 0 Don't measure 1 Measure * fitnessMark:0 Don't fitness 1:fitness * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandUpdateHS2SUserInfoWithUser:(HealthUser*)user result:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Delete HS2S User * Import parameter: * @param userID :NSData type,The user ID must be 16 bytes or the user creation fails, * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandDeleteHS2SUserWithUserID:(NSData*)userID result:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Get HS2S Memory data count * Import parameter: * @param userID :NSData type,The user ID must be 16 bytes or the user creation fails, * Return parameters: * @param count NSNumber Type,memory count * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SMemoryDataCountWithUserID:(NSData*)userID memoryCount:(DisposeHS2SMemoryCountBlock)count DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Get HS2S Memory data Lean mass calculation formula: result = weight * (1 - body fat percentage) BMI calculation formula: result = weight / (height * height) BMR calculation formula: If no fat is measured { For men: P = 13.397* weight + 4.799* height – 5.677* age + 88.362 For women: P = 9.247* weight + 3.098* height – 4.330* age + 447.593 If the user enters the sport level in the app, correct the P: Sport level=1, P = P*1.0 Sport level = 2, P = P*1.05 Sport level = 3, P = P*1.10 } When fat is measured: { P=370 + 21.6*Lean mass(kg ) } * Import parameter: * @param userID :NSData type,The user ID must be 16 bytes or the user creation fails, * Return parameters: * @param memoryData NSArray Type,memory data * Example: * ( { DeviceMac = 004D320CA04D; //device mac HS2SBodyAge = 10; //body age HS2SBodyWaterPercentAge = "39.3"; //body moisture rate HS2SBoneMineral = "1.9"; //Bone salt HS2SFatControl = 0; //Fat Control HS2SFatWeight = 0; //Fat weight HS2SFitness = 1; //0:Don't fitness 1:fitness HS2SImpedance = (); //NSArray type ,Impedance HS2SIsRightTS = 1; //0:Incorrect, unsynchronized time on measured data 1:Correct, synchronize the measured data after the time HS2SMeasureTS = "2019-05-18 08:56:38 +0000"; HS2SMuscle = "13.1"; //Muscle mass HS2SMuscleControl = 0; //Muscle Control HS2SProteinPercentAge = "9.8"; //Protein rate HS2SResultBodyFatPercentAge = "44.2"; //Body fat rate HS2SBodyWeightFlag = 0; //0:Body fat was not measured 1:Measure body fat HS2SSkeletalMuscle = 0; //Skeletal Muscle HS2SStandardWeight = 0; //Standard Weight HS2SVFR = 29; //Visceral fat grade HS2SWeightControl = 0; //Weight Control HS2SWeigthResult = "79.5"; "UserInfo_Age" = 18; "UserInfo_Height" = 100; "UserInfo_SEX" = 1; } * ) * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SMemoryDataWithUserID:(NSData*)userID memoryData:(DisposeHS2SMemoryDataBlock)memoryData DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Delete HS2S Memory data * Import parameter: * @param userID :NSData type,The user ID must be 16 bytes or the user creation fails, * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandDeleteHS2SMemoryDataWithUserID:(NSData*)userID result:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Get HS2S Anonymous Memory data count * Return parameters: * @param count memory count * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SAnonymousMemoryDataCount:(DisposeHS2SAnonymousMemoryCountBlock)count DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Get HS2S Anonymous Memory data * Return parameters: * @param memoryData NSArray type,Each result dictionary contains: HS2SIsRightTS(Time correctness identification,0:Incorrect, unsynchronized time on measured data 1:Correct, synchronize the measured data after the time),HS2SMeasureTS(Measure Time,NSdate type),HS2SWeigthResult(Weigth Result) * Example: * ( { HS2SIsRightTS = 0; //Time correctness identification HS2SMeasureTS = "2019-05-18 07:18:36 +0000"; HS2SWeigthResult = "43.7"; } * ) * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandGetHS2SAnonymousMemoryData:(DisposeHS2SAnonymousMemoryDataBlock)memoryData DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Delete HS2S Anonymous Memory data * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandDeleteHS2SAnonymousMemoryData:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Measure HS2S Data * Import parameter: * @param user (user information must be entered in accordance with the reference range, otherwise it may be impossible to measure the accurate body fat information) Lean mass calculation formula: result = weight * (1 - body fat percentage) BMI calculation formula: result = weight / (height * height) BMR calculation formula: If no fat is measured { For men: P = 13.397* weight + 4.799* height – 5.677* age + 88.362 For women: P = 9.247* weight + 3.098* height – 4.330* age + 447.593 If the user enters the sport level in the app, correct the P: Sport level=1, P = P*1.0 Sport level = 2, P = P*1.05 Sport level = 3, P = P*1.10 } When fat is measured: { P=370 + 21.6*Lean mass(kg ) } * contains: * userType : 0 guest 1 normal * hs2SUserID:NSData type,The user ID must be 16 bytes or the user creation fails, * createTS:NSInteger type,The unit of time is seconds , * weight:NSNumber type,range:20-150kg, * age:NSNumber type,range:18-99 years, * height:NSNumber type,range:90-220cm * sex:0 female 1 male, * impedanceMark: 0 Don't measure 1 Measure * fitnessMark:0 Don't fitness 1:fitness * Return parameters: * @param unStableWeight - Current weight, (Kg) [Value Range:0~180] * @param stableWeight - Stable weight, (Kg) [Value Range:0~180] * @param weightAndBodyInfo Weight and body fat information guest user not return weightAndBodyInfo * Example: * { DeviceMac = 004D320CA04D; //device mac HS2SBodyAge = 10; //body age HS2SBodyWaterPercentAge = "39.3"; //body moisture rate HS2SBoneMineral = "1.9"; //Bone salt HS2SFatControl = 0; //Fat Control HS2SFatWeight = 0; //Fat weight HS2SFitness = 1; //0:Don't fitness 1:fitness HS2SImpedance = (); //NSArray type ,Impedance HS2SMeasureTS = "2019-05-18 08:56:38 +0000"; HS2SMuscle = "13.1"; //Muscle mass HS2SMuscleControl = 0; //Muscle Control HS2SProteinPercentAge = "9.8"; //Protein rate HS2SResultBodyFatPercentAge = "44.2"; //Body fat rate HS2SBodyWeightFlag = 0; //0:Body fat was not measured 1:Measure body fat HS2SSkeletalMuscle = 0; //Skeletal Muscle HS2SStandardWeight = 0; //Standard Weight HS2SVFR = 29; //Visceral fat grade HS2SWeightControl = 0; //Weight Control HS2SWeigthResult = "79.5"; "UserInfo_Age" = 18; "UserInfo_Height" = 100; "UserInfo_SEX" = 1; * } * @param measureFinish If HS2S is measuring weight, the call to the online measurement interface will fail at the beginning, and the call to the interface will succeed when the return measurement is completed. * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandStartHS2SMeasureWithUser:(HealthUser*)user weight:(DisposeHS2SUnStableWeight)unStableWeight stableWeight:(DisposeHS2SStableWeight)stableWeight weightAndBodyInfo:(DisposeHS2SWeightAndBodyInfo)weightAndBodyInfo disposeHS2SMeasureFinish:(DisposeHS2SMeasureFinish)measureFinish DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * Reset HS2S device * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandResetHS2SDevice:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * HS2S BroadCastType device * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandBroadCastTypeHS2SDevice:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** Disconnect current device */ -(void)commandDisconnectDevice; /** * HS2S Light up bluetooth * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandSetHS2SDeviceLightUp:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * HS2S Enter heart rate measurement mode * Return parameters: * @param result * heartResultDic:{ HeartValue = 0; ResultStatus = 1;(0: success, 1: failed 1, no real-time data received in 6s 2: Failure 2, the algorithm judges that the user is weighing down 3: Failure 3, calculation failed 4: Failure 4: 30s timeout) } * @param status ( 1: User on the scale 2: User referred below 3: The user's heartbeat signal is detected) * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandEnterHS2SHeartRateMeasurementMode:(DisposeHS2SHeartResult)result measurementStatus:(DisposeHS2SMeasurementStatus)status DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; /** * HS2S Exit heart rate measurement mode * Return parameters: * @param result YES:Success NO:Failed * @param disposeErrorBlock - error code * Error code definition： * refer to “error” : HS2S error instruction. */ -(void)commandExitHS2SHeartRateMeasurementMode:(DisposeHS2SResult)result DiaposeErrorBlock:(DisposeHS2SErrorBlock)disposeErrorBlock; @end NS_ASSUME_NONNULL_END