import { IAspect, aws_dynamodb as dynamodb, aws_cloudwatch as cloudwatch, Duration } from 'aws-cdk-lib';
import { Construct, IConstruct } from 'constructs';
import { AlarmBaseProps } from './common';
/**
 * The recommended metrics for DynamoDb alarms.
 */
export declare enum DynamoDbRecommendedAlarmsMetrics {
    /**
     * Requests to DynamoDB that exceed the provisioned read capacity units for a table or a global secondary index.
     */
    READ_THROTTLE_EVENTS = "ReadThrottleEvents",
    /**
     * The requests to DynamoDB or Amazon DynamoDB Streams that generate an HTTP 500 status code during the specified
     * time period. An HTTP 500 usually indicates an internal service error.
     */
    SYSTEM_ERRORS = "SystemErrors",
    /**
     * Requests to DynamoDB that exceed the provisioned write capacity units for a table or a global secondary index.
     */
    WRITE_THROTTLE_EVENTS = "WriteThrottleEvents",
    /**
     * The elapsed time since a record yet to be replicated to the Kinesis data stream first appeared in the DynamoDB table.
     */
    AGE_OF_OLDEST_UNREPLICATED_RECORD = "AgeOfOldestUnreplicatedRecord",
    /**
     * The number of records that DynamoDB failed to replicate to your Kinesis data stream.
     */
    FAILED_TO_REPLICATE_RECORD_COUNT = "FailedToReplicateRecordCount",
    /**
     * The number of records that were throttled by your Kinesis data stream due to insufficient Kinesis Data Streams capacity.
     */
    THROTTLED_PUT_RECORD_COUNT = "ThrottledPutRecordCount"
}
/**
 * The common optional configuration for the alarms.
 */
export interface DynamoDbAlarmBaseConfig extends AlarmBaseProps {
    /**
     * The period over which the specified statistic is applied.
     *
     * @default Duration.minutes(1)
     */
    readonly period?: Duration;
}
/**
 * The common properties for the DynamoDb Table alarms.
 */
export interface DynamoDbTableAlarmProps {
    /**
     * The DynamoDb Table to monitor.
     */
    readonly table: dynamodb.Table;
}
/**
 * Configuration for the ReadThrottleEvents alarm.
 */
export interface DynamoDbReadThrottleEventsAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * Set the threshold according to the expected read traffic for the DynamoDB table,
     * accounting for an acceptable level of throttling. It is important to monitor whether
     * you are under provisioned and not causing consistent throttling. You can also analyze
     * historical data to find the acceptable throttling level for the application workload,
     * and then tune the threshold to be higher than your usual throttling level. Throttled
     * requests should be retried by the application or service as they are transient. Therefore,
     * a very low threshold may cause the alarm to be too sensitive, causing unwanted state transitions.
     */
    readonly threshold: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 5
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 5
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - ReadThrottleEvents'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can detect sustained throttling for read requests to the DynamoDB table.
     * Sustained throttling of read requests can negatively impact your workload read operations and
     * reduce the overall efficiency of the system.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableReadThrottleEventsAlarm construct.
 */
export interface DynamoDbTableReadThrottleEventsAlarmProps extends DynamoDbTableAlarmProps, DynamoDbReadThrottleEventsAlarmConfig {
}
/**
 * This alarm detects if there are high number of read requests getting throttled for the DynamoDB table.
 *
 * To troubleshoot the issue, see {@link https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/TroubleshootingThrottling.html|Troubleshooting throttling issues in Amazon DynamoDB}.
 *
 * The alarm is triggered when the number of read requests exceeds the threshold.
 */
export declare class DynamoDbTableReadThrottleEventsAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableReadThrottleEventsAlarmProps);
}
/**
 * Configuration for the SystemErrors alarm.
 */
export interface DynamoDbSystemErrorsAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * Set the threshold according to the expected traffic, accounting for an acceptable level of system errors.
     * You can also analyze historical data to find the acceptable error count for the application workload, and
     * then tune the threshold accordingly. System errors should be retried by the application/service as they are
     * transient. Therefore, a very low threshold might cause the alarm to be too sensitive, causing unwanted state
     * transitions.
     */
    readonly threshold: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 15
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 15
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - SystemErrors'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can detect sustained system errors for the DynamoDB table requests. System errors
     * indicate internal service errors from DynamoDB and helps correlate to the issue that the client is having.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableSystemErrorsAlarm construct.
 */
export interface DynamoDbTableSystemErrorsAlarmProps extends DynamoDbTableAlarmProps, DynamoDbSystemErrorsAlarmConfig {
}
/**
 * This alarm detects a sustained high number of system errors for the DynamoDB table requests.
 *
 * If you continue to get 5xx errors, open the {@link https://status.aws.amazon.com/|AWS Service Health Dashboard}
 * to check for operational issues with the service. You can use this alarm to get notified in case there is a prolonged
 * internal service issue from DynamoDB and it helps you correlate with the issue your client application is facing.
 * Refer {@link https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Programming.Errors.html#Programming.Errors.MessagesAndCodes.http5xx|Error handling for DynamoDB} for more information.
 *
 * The alarm is triggered when the number of system errors exceeds threshold.
 */
export declare class DynamoDbTableSystemErrorsAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableSystemErrorsAlarmProps);
}
/**
 * Configuration for the WriteThrottleEvents alarm.
 */
export interface DynamoDbWriteThrottleEventsAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * Set the threshold according to the expected write traffic for the DynamoDB table,
     * accounting for an acceptable level of throttling. It is important to monitor if you
     * are under provisioned and not causing consistent throttling. You can also analyze
     * historical data to find the acceptable level of throttling for the application workload,
     * and then tune the threshold to a value higher than your usual acceptable throttling level.
     * Throttled requests should be retried by the application/service as they are transient.
     * Therefore, a very low threshold might cause the alarm to be too sensitive, causing
     * unwanted state transitions.
     */
    readonly threshold: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 5
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 5
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - WriteThrottleEvents'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can detect sustained throttling for write requests to the DynamoDB table.
     * Sustained throttling of write requests can negatively impact your workload write operations and
     * reduce the overall efficiency of the system.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableWriteThrottleEventsAlarm construct.
 */
export interface DynamoDbTableWriteThrottleEventsAlarmProps extends DynamoDbTableAlarmProps, DynamoDbWriteThrottleEventsAlarmConfig {
}
/**
 * This alarm detects if there are high number of read requests getting throttled for the DynamoDB table.
 *
 * To troubleshoot the issue, see {@link https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/TroubleshootingThrottling.html|Troubleshooting throttling issues in Amazon DynamoDB}.
 *
 * The alarm is triggered when the number of read requests exceeds the threshold.
 */
export declare class DynamoDbTableWriteThrottleEventsAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableWriteThrottleEventsAlarmProps);
}
/**
 * Configuration for the AgeOfOldestUnreplicatedRecord alarm.
 */
export interface DynamoDbAgeOfOldestUnreplicatedRecordAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * Set the threshold according to the desired replication delay measured in milliseconds.
     * This value depends on your workload's requirements and expected performance.
     */
    readonly threshold: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 3
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 3
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - AgeOfOldestUnreplicatedRecord'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can monitor unsuccessful replication attempts and the resulting delay
     * in replication to the Kinesis data stream.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableAgeOfOldestUnreplicatedRecordAlarm construct.
 */
export interface DynamoDbTableAgeOfOldestUnreplicatedRecordAlarmProps extends DynamoDbTableAlarmProps, DynamoDbAgeOfOldestUnreplicatedRecordAlarmConfig {
}
/**
 * This alarm detects the delay in replication to a Kinesis data stream.
 *
 * Under normal operation, `AgeOfOldestUnreplicatedRecord` should be only milliseconds.
 * This number grows based on unsuccessful replication attempts caused by customer-controlled
 * configuration choices. Customer-controlled configuration examples that lead to unsuccessful
 * replication attempts are an under-provisioned Kinesis data stream capacity that leads to
 * excessive throttling. or a manual update to the Kinesis data stream's access policies that
 * prevents DynamoDB from adding data to the data stream. To keep this metric as low as possible,
 * you need to ensure the right provisioning of Kinesis data stream capacity and make sure that
 * DynamoDB's permissions are unchanged.
 *
 * The alarm is triggered when the elapsed time since a record yet to be replicated exceeds the threshold.
 */
export declare class DynamoDbTableAgeOfOldestUnreplicatedRecordAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableAgeOfOldestUnreplicatedRecordAlarmProps);
}
/**
 * Configuration for the FailedToReplicateRecordCount alarm.
 */
export interface DynamoDbFailedToReplicateRecordCountAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * Set the threshold to 0 to detect any records that DynamoDB failed to replicate.
     */
    readonly threshold?: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 1
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 1
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - FailedToReplicateRecordCount'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can monitor the number of records that DynamoDB failed to replicate to
     * your Kinesis data stream because of the item size limit of Kinesis Data Streams.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableFailedToReplicateRecordCountAlarm construct.
 */
export interface DynamoDbTableFailedToReplicateRecordCountAlarmProps extends DynamoDbTableAlarmProps, DynamoDbFailedToReplicateRecordCountAlarmConfig {
}
/**
 * This alarm detects the number of records that DynamoDB failed to replicate to your Kinesis data stream.
 *
 * Certain items larger than 34 KB might expand in size to change data records that are larger than the 1 MB
 * item size limit of Kinesis Data Streams. This size expansion occurs when these larger than 34 KB items include
 * a large number of Boolean or empty attribute values. Boolean and empty attribute values are stored as 1 byte
 * in DynamoDB, but expand up to 5 bytes when they're serialized using standard JSON for Kinesis Data Streams
 * replication. DynamoDB can't replicate such change records to your Kinesis data stream. DynamoDB skips these
 * change data records, and automatically continues replicating subsequent records.
 *
 * The alarm is triggered when the the number of records failed to be replicated exceeds the threshold.
 */
export declare class DynamoDbTableFailedToReplicateRecordCountAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableFailedToReplicateRecordCountAlarmProps);
}
/**
 * Configuration for the ThrottledPutRecordCount alarm.
 */
export interface DynamoDbThrottledPutRecordCountAlarmConfig extends DynamoDbAlarmBaseConfig {
    /**
     * You might experience some throttling during exceptional usage peaks, but throttled records
     * should remain as low as possible to avoid higher replication latency (DynamoDB retries sending
     * throttled records to the Kinesis data stream). Set the threshold to a number which can help you
     * catch regular excessive throttling. You can also analyze historical data of this metric to find
     * the acceptable throttling rates for the application workload. Tune the threshold to a value that
     * the application can tolerate based on your use case.
     */
    readonly threshold: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 10
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 10
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - tableName + ' - ThrottledPutRecordCount'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm can monitor the number of records that that were throttled by your Kinesis
     * data stream because of insufficient Kinesis data stream capacity.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the DynamoDbTableThrottledPutRecordCountAlarm construct.
 */
export interface DynamoDbTableThrottledPutRecordCountAlarmProps extends DynamoDbTableAlarmProps, DynamoDbThrottledPutRecordCountAlarmConfig {
}
/**
 * This alarm detects the records getting throttled by your Kinesis data stream during the
 * replication of change data capture to Kinesis.
 *
 * This throttling happens because of insufficient Kinesis data stream capacity. If you experience excessive
 * and regular throttling, you might need to increase the number of Kinesis stream shards proportionally to
 * the observed write throughput of your table. To learn more about determining the size of a Kinesis data stream,
 * see {@link https://docs.aws.amazon.com/streams/latest/dev/amazon-kinesis-streams.html#how-do-i-size-a-stream|Determining the Initial Size of a Kinesis Data Stream}.
 *
 * The alarm is triggered when the number or records that were throttled exceeds the threshold.
 */
export declare class DynamoDbTableThrottledPutRecordCountAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: DynamoDbTableThrottledPutRecordCountAlarmProps);
}
/**
 * Configurations for the recommended alarms for an DynamoDb Service.
 *
 * Default actions are overridden by the actions specified in the
 * individual alarm configurations.
 */
export interface DynamoDbTableRecommendedAlarmsConfig {
    /**
     * The default action to take when an alarm is triggered.
     *
     * @default - None
     */
    readonly defaultAlarmAction?: cloudwatch.IAlarmAction;
    /**
     * The default action to take when an alarm enters the ok state.
     *
     * @default - None
     */
    readonly defaultOkAction?: cloudwatch.IAlarmAction;
    /**
     * The default action to take when an alarm has insufficient data.
     *
     * @default - None
     */
    readonly defaultInsufficientDataAction?: cloudwatch.IAlarmAction;
    /**
     * How to handle missing data for this alarm.
     *
     * @default TreatMissingData.MISSING
     */
    readonly treatMissingData?: cloudwatch.TreatMissingData;
    /**
     * Alarm metrics to exclude from the recommended alarms.
     *
     * @default - None
     */
    readonly excludeAlarms?: DynamoDbRecommendedAlarmsMetrics[];
    /**
     * The resources to exclude from the recommended alarms.
     *
     * Use a resources id to exclude a specific resource.
     */
    readonly excludeResources?: string[];
    /**
     * The configuration for the ReadThrottleEvents alarm.
     */
    readonly configReadThrottleEventsAlarm: DynamoDbReadThrottleEventsAlarmConfig;
    /**
     * The configuration for the SystemErrors alarm.
     */
    readonly configSystemErrorsAlarm: DynamoDbSystemErrorsAlarmConfig;
    /**
     * The configuration for the WriteThrottleEvents alarm.
     */
    readonly configWriteThrottleEventsAlarm: DynamoDbWriteThrottleEventsAlarmConfig;
    /**
     * The configuration for the AgeOfOldestUnreplicatedRecord alarm.
     */
    readonly configAgeOfOldestUnreplicatedRecordAlarm?: DynamoDbAgeOfOldestUnreplicatedRecordAlarmConfig;
    /**
     * The configuration for the FailedToReplicateRecordCount alarm.
     */
    readonly configFailedToReplicateRecordCountAlarm?: DynamoDbFailedToReplicateRecordCountAlarmConfig;
    /**
     * The configuration for the ThrottledPutRecordCount alarm.
     */
    readonly configThrottledPutRecordCountAlarm?: DynamoDbThrottledPutRecordCountAlarmConfig;
}
/**
 * Properties for the DynamoDbTableRecommendedAlarms construct.
 */
export interface DynamoDbTableRecommendedAlarmsProps extends DynamoDbTableRecommendedAlarmsConfig {
    /**
     * The DynamoDb Table to monitor.
     */
    readonly table: dynamodb.Table;
}
/**
 * A construct that creates the recommended alarms for an DynamoDb Table.
 *
 * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#DynamoDB
 */
export declare class DynamoDbTableRecommendedAlarms extends Construct {
    /**
     * The ReadThrottleEvents alarm.
     */
    readonly alarmReadThrottleEvents?: DynamoDbTableReadThrottleEventsAlarm;
    /**
     * The SystemErrors alarm.
     */
    readonly alarmSystemErrors?: DynamoDbTableSystemErrorsAlarm;
    /**
     * The WriteThrottleEvents alarm.
     */
    readonly alarmWriteThrottleEvents?: DynamoDbTableWriteThrottleEventsAlarm;
    /**
     * The AgeOfOldestUnreplicatedRecord alarm.
     */
    readonly alarmAgeOfOldestUnreplicatedRecord?: DynamoDbTableAgeOfOldestUnreplicatedRecordAlarm;
    /**
     * The FailedToReplicateRecordCount alarm.
     */
    readonly alarmFailedToReplicateRecordCount?: DynamoDbTableFailedToReplicateRecordCountAlarm;
    /**
     * The ThrottledPutRecordCount alarm.
     */
    readonly alarmThrottledPutRecordCount?: DynamoDbTableThrottledPutRecordCountAlarm;
    constructor(scope: Construct, id: string, props: DynamoDbTableRecommendedAlarmsProps);
}
/**
 * An extension for the Table construct that provides methods
 * to create recommended alarms.
 */
export declare class Table extends dynamodb.Table {
    constructor(scope: Construct, id: string, props: dynamodb.TableProps);
    /**
     * Creates an alarm that monitors the ReadThrottleEvents for the DynamoDb table.
     */
    alarmReadThrottleEvents(props: DynamoDbReadThrottleEventsAlarmConfig): DynamoDbTableReadThrottleEventsAlarm;
    /**
     * Creates an alarm that monitors the SystemErrors for the DynamoDb table.
     */
    alarmSystemErrors(props: DynamoDbSystemErrorsAlarmConfig): DynamoDbTableSystemErrorsAlarm;
    /**
     * Creates an alarm that monitors the WriteThrottleEvents for the DynamoDb table.
     */
    alarmWriteThrottleEvents(props: DynamoDbWriteThrottleEventsAlarmConfig): DynamoDbTableWriteThrottleEventsAlarm;
    /**
     * Creates an alarm that monitors the AgeOfOldestUnreplicatedRecord for the DynamoDb table.
     */
    alarmAgeOfOldestUnreplicatedRecord(props: DynamoDbAgeOfOldestUnreplicatedRecordAlarmConfig): DynamoDbTableAgeOfOldestUnreplicatedRecordAlarm;
    /**
     * Creates an alarm that monitors the FailedToReplicateRecordCount for the DynamoDb table.
     */
    alarmFailedToReplicateRecordCount(props: DynamoDbFailedToReplicateRecordCountAlarmConfig): DynamoDbTableFailedToReplicateRecordCountAlarm;
    /**
     * Creates an alarm that monitors the ThrottledPutRecordCount for the DynamoDb table.
     */
    alarmThrottledPutRecordCount(props: DynamoDbThrottledPutRecordCountAlarmConfig): DynamoDbTableThrottledPutRecordCountAlarm;
    /**
     * Creates the recommended alarms for the DynamoDb Table.
     *
     * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#DynamoDB
     */
    applyRecommendedAlarms(props: DynamoDbTableRecommendedAlarmsConfig): DynamoDbTableRecommendedAlarms;
}
/**
 * Configures the recommended alarms for an DynamoDb Table.
 *
 * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#DynamoDB
 */
export declare class DynamoDbRecommendedAlarmsAspect implements IAspect {
    private readonly props;
    constructor(props: DynamoDbTableRecommendedAlarmsConfig);
    visit(node: IConstruct): void;
}