import { IAspect, aws_efs as efs, aws_cloudwatch as cloudwatch, Duration } from 'aws-cdk-lib';
import { Construct, IConstruct } from 'constructs';
import { AlarmBaseProps } from './common';
/**
 * The recommended metrics for EFS alarms.
 */
export declare enum EfsRecommendedAlarmsMetrics {
    /**
     * Percentage of how close a file system is to reaching the I/O limit of the General Purpose
     * performance mode.
     */
    PERCENT_IO_LIMIT = "PercentIOLimit",
    /**
     * The number of burst credits that a file system has. Burst credits allow a file system to burst
     * to throughput levels above a file system's baseline level for periods of time.
     */
    BURST_CREDIT_BALANCE = "BurstCreditBalance"
}
/**
 * The common optional configuration for the alarms.
 */
export interface EfsAlarmBaseConfig extends AlarmBaseProps {
    /**
     * The period over which the specified statistic is applied.
     *
     * @default Duration.minutes(1)
     */
    readonly period?: Duration;
}
/**
 * The common properties for the EFS FileSystem alarms.
 */
export interface EfsFileSystemAlarmProps {
    /**
     * The EFS FileSystem to monitor.
     */
    readonly fileSystem: efs.FileSystem;
}
/**
 * Configuration for the PercentIOLimit alarm.
 */
export interface EfsPercentIOLimitAlarmConfig extends EfsAlarmBaseConfig {
    /**
     * When the file system reaches its I/O limit, it may respond to read and write requests slower.
     * Therefore, it is recommended that the metric is monitored to avoid impacting applications that
     * use the file system. The threshold can be set around 100%. However, this value can be adjusted
     * to a lower value based on file system characteristics.
     *
     * @default 100
     */
    readonly threshold?: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 15
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 15
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - fileSystemId + ' - PercentIOLimit'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm is used to detect how close the file system is to reach the I/O limit of the General
     * Purpose performance mode. Consistent high I/O percentage can be an indicator of the file system cannot scale
     * with respect to I/O requests enough and the file system can be a resource bottleneck for the applications
     * that use the file system.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the EfsFileSystemPercentIOLimitAlarm construct.
 */
export interface EfsFileSystemPercentIOLimitAlarmProps extends EfsFileSystemAlarmProps, EfsPercentIOLimitAlarmConfig {
}
/**
 * This alarm helps in ensuring that the workload stays within the I/O limit available to the file system.
 *
 * If the metric reaches its I/O limit consistently, consider moving the application to a file system that
 * uses Max I/O performance as mode. For troubleshooting, check clients that are connected to the file system
 * and applications of the clients that throttles the file system.
 *
 * The alarm is triggered when the percentage exceed or equals % threshold.
 */
export declare class EfsFileSystemPercentIOLimitAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: EfsFileSystemPercentIOLimitAlarmProps);
}
/**
 * Configuration for the BurstCreditBalance alarm.
 */
export interface EfsBurstCreditBalanceAlarmConfig extends EfsAlarmBaseConfig {
    /**
     * When the file system run out of burst credits and even if the baseline throughput rate is lower,
     * EFS continues to provide a metered throughput of 1 MiBps to all file systems. However, it is recommended
     * that the metric is monitored for low burst credit balance to avoid the file system acting as resource
     * bottleneck for the applications. The threshold can be set around 0 bytes.
     *
     * @default 0
     */
    readonly threshold?: number;
    /**
     * The number of periods over which data is compared to the specified threshold.
     *
     * @default 15
     */
    readonly evaluationPeriods?: number;
    /**
     * The number of data points that must be breaching to trigger the alarm.
     *
     * @default 15
     */
    readonly datapointsToAlarm?: number;
    /**
     * The alarm name.
     *
     * @default - fileSystemId + ' - BurstCreditBalance'
     */
    readonly alarmName?: string;
    /**
     * The description of the alarm.
     *
     * @default - This alarm is used to detect low burst credit balance of the file system. Consistent low
     * burst credit balance can be an indicator of the slowing down in throughput and increase in I/O latency.
     */
    readonly alarmDescription?: string;
}
/**
 * The properties for the EfsFileSystemBurstCreditBalanceAlarm construct.
 */
export interface EfsFileSystemBurstCreditBalanceAlarmProps extends EfsFileSystemAlarmProps, EfsBurstCreditBalanceAlarmConfig {
}
/**
 * This alarm helps in ensuring that there is available burst credit balance for the file system usage.
 *
 * When there is no available burst credit, applications access to the the file system will be limited due to low throughput.
 * If the metric drops to 0 consistently, consider changing the throughput mode to Elastic or Provisioned throughput mode.
 *
 * The alarm is triggered when the percentage is lower or equals the threshold.
 */
export declare class EfsFileSystemBurstCreditBalanceAlarm extends cloudwatch.Alarm {
    constructor(scope: IConstruct, id: string, props: EfsFileSystemBurstCreditBalanceAlarmProps);
}
/**
 * Configurations for the recommended alarms for an EFS Service.
 *
 * Default actions are overridden by the actions specified in the
 * individual alarm configurations.
 */
export interface EfsFileSystemRecommendedAlarmsConfig {
    /**
     * The default action to take when an alarm is triggered.
     *
     * @default - None
     */
    readonly defaultAlarmAction?: cloudwatch.IAlarmAction;
    /**
     * The default action to take when an alarm enters the ok state.
     *
     * @default - None
     */
    readonly defaultOkAction?: cloudwatch.IAlarmAction;
    /**
     * The default action to take when an alarm has insufficient data.
     *
     * @default - None
     */
    readonly defaultInsufficientDataAction?: cloudwatch.IAlarmAction;
    /**
     * How to handle missing data for this alarm.
     *
     * @default TreatMissingData.MISSING
     */
    readonly treatMissingData?: cloudwatch.TreatMissingData;
    /**
     * Alarm metrics to exclude from the recommended alarms.
     *
     * @default - None
     */
    readonly excludeAlarms?: EfsRecommendedAlarmsMetrics[];
    /**
     * The resources to exclude from the recommended alarms.
     *
     * Use a resources id to exclude a specific resource.
     */
    readonly excludeResources?: string[];
    /**
     * The configuration for the PercentIOLimit alarm.
     */
    readonly configPercentIOLimitAlarm?: EfsPercentIOLimitAlarmConfig;
    /**
     * The configuration for the BurstCreditBalance alarm.
     */
    readonly configBurstCreditBalanceAlarm?: EfsBurstCreditBalanceAlarmConfig;
}
/**
 * Properties for the EfsFileSystemRecommendedAlarms construct.
 */
export interface EfsFileSystemRecommendedAlarmsProps extends EfsFileSystemRecommendedAlarmsConfig {
    /**
     * The EFS FileSystem to monitor.
     */
    readonly fileSystem: efs.FileSystem;
}
/**
 * A construct that creates the recommended alarms for an EFS FileSystem.
 *
 * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#EFS
 */
export declare class EfsFileSystemRecommendedAlarms extends Construct {
    /**
     * The PercentIOLimit alarm.
     */
    readonly alarmPercentIOLimit?: EfsFileSystemPercentIOLimitAlarm;
    /**
     * The BurstCreditBalance alarm.
     */
    readonly alarmBurstCreditBalance?: EfsFileSystemBurstCreditBalanceAlarm;
    constructor(scope: Construct, id: string, props: EfsFileSystemRecommendedAlarmsProps);
}
/**
 * An extension for the FileSystem construct that provides methods
 * to create recommended alarms.
 */
export declare class FileSystem extends efs.FileSystem {
    constructor(scope: Construct, id: string, props: efs.FileSystemProps);
    /**
     * Creates an alarm that monitors the PercentIOLimit for the EFS fileSystem.
     */
    alarmPercentIOLimit(props?: EfsPercentIOLimitAlarmConfig): EfsFileSystemPercentIOLimitAlarm;
    /**
     * Creates an alarm that monitors the BurstCreditBalance for the EFS fileSystem.
     */
    alarmBurstCreditBalance(props?: EfsBurstCreditBalanceAlarmConfig): EfsFileSystemBurstCreditBalanceAlarm;
    /**
     * Creates the recommended alarms for the EFS FileSystem.
     *
     * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#EFS
     */
    applyRecommendedAlarms(props?: EfsFileSystemRecommendedAlarmsConfig): EfsFileSystemRecommendedAlarms;
}
/**
 * Configures the recommended alarms for an EFS FileSystem.
 *
 * @see https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/Best_Practice_Recommended_Alarms_AWS_Services.html#EFS
 */
export declare class EfsRecommendedAlarmsAspect implements IAspect {
    private readonly props?;
    constructor(props?: EfsFileSystemRecommendedAlarmsConfig | undefined);
    visit(node: IConstruct): void;
}