An ERC-20 token is a standardized Smart Contract with a predefined set of features. It represents fungible tokens, which can be interchanged. The ERC-20 token is used as a blockchain representation of the currency.
Tatum now supports ERC20 these blockchains:
Deploy ERC20 Smart Contract. This method creates new ERC20 (Fungible Tokens) Smart Contract on the blockchain. Smart contract is standardized and audited. It is possible to mint and burn tokens.
It is possible to see the code of the deployed contract here.
Whole predefined supply of the tokens will be transferred to the chosen address.
This operation needs the private key of the blockchain address. Every time the funds are transferred, the transaction must be signed with the corresponding private key.
No one should ever send it's own private keys to the internet because there is a strong possibility of stealing keys and loss of funds. In this method, it is possible to enter privateKey
or signatureId. PrivateKey should be used only for quick development on testnet versions of blockchain when there is no risk of losing funds. In production,
Tatum KMS should be used for the highest security standards, and signatureId should be present in the request.
Alternatively, using the Tatum client library for supported languages.
Create new ERC20 Fungible Tokens and transfer it to destination account. Tokens can be created only if current supply is lower then total supply. Create and transfer any ERC20 tokens from smart contract defined in contractAddress.
This operation needs the private key of the blockchain address. Every time the funds are transferred, the transaction must be signed with the corresponding private key.
No one should ever send it's own private keys to the internet because there is a strong possibility of stealing keys and loss of funds. In this method, it is possible to enter privateKey
or signatureId. PrivateKey should be used only for quick development on testnet versions of blockchain when there is no risk of losing funds. In production,
Tatum KMS should be used for the highest security standards, and signatureId should be present in the request.
Alternatively, using the Tatum client library for supported languages.
Burn ERC20 Fungible Tokens. This method destroys ERC20 tokens from smart contract defined in contractAddress.
This operation needs the private key of the blockchain address. Every time the funds are transferred, the transaction must be signed with the corresponding private key.
No one should ever send it's own private keys to the internet because there is a strong possibility of stealing keys and loss of funds. In this method, it is possible to enter privateKey
or signatureId. PrivateKey should be used only for quick development on testnet versions of blockchain when there is no risk of losing funds. In production,
Tatum KMS should be used for the highest security standards, and signatureId should be present in the request.
Alternatively, using the Tatum client library for supported languages.
Approve ERC20 Fungible Tokens to be spendable by someone else. This method allows new address to transfer/burn ERC20 tokens on behalf of the owner.
This operation needs the private key of the blockchain address. Every time the funds are transferred, the transaction must be signed with the corresponding private key.
No one should ever send it's own private keys to the internet because there is a strong possibility of stealing keys and loss of funds. In this method, it is possible to enter privateKey
or signatureId. PrivateKey should be used only for quick development on testnet versions of blockchain when there is no risk of losing funds. In production,
Tatum KMS should be used for the highest security standards, and signatureId should be present in the request.
Alternatively, using the Tatum client library for supported languages.
Transfer ERC20 Fungible Tokens from account to account. Transfer any ERC20 tokens from smart contract defined in contractAddress. This method invokes ERC20 method transfer() to transfer tokens.
This operation needs the private key of the blockchain address. Every time the funds are transferred, the transaction must be signed with the corresponding private key.
No one should ever send it's own private keys to the internet because there is a strong possibility of stealing keys and loss of funds. In this method, it is possible to enter privateKey
or signatureId. PrivateKey should be used only for quick development on testnet versions of blockchain when there is no risk of losing funds. In production,
Tatum KMS should be used for the highest security standards, and signatureId should be present in the request.
Alternatively, using the Tatum client library for supported languages.
Algorand is unique a way that the receiving account should be ready before sending the FT(Erc20) asset.
To perform this, the receiving account should transfer the FT(Erc20) asset with 0 amount to itself.
During the process, it's using the same API as the main transaction: the only difference is that the "fromPrivateKey" should be the privateKey of the receiving account.
Get ERC20 transactions by address. This includes incoming and outgoing transactions for the address.
" operationId: Erc20GetTransactionByAddress parameters: - description: "Blockchain to work with" in: path name: chain required: true schema: type: string enum: - CELO example: "CELO" - description: "Account address" in: path name: address required: true schema: type: string example: "0x8ce4e40889a13971681391aad29e88efaf91f784" - description: "Token address" in: path name: tokenAddress required: true schema: type: string example: "0x1ce4e40889a13971681391aad29e88efaf91f784" - description: Max number of items per page is 50. in: query name: pageSize schema: type: number example: 10 maximum: 50 minimum: 1 required: true - description: Offset to obtain next page of the data. in: query name: offset schema: type: number example: 0 - description: Transactions from this block onwords will be included. in: query name: from schema: type: number minimum: 0 example: 1087623 - description: Transactions up to this block will be included. in: query name: to schema: type: number minimum: 0 example: 1087823 - description: Sorting of the data. ASC - oldest first, DESC - newest first. in: query name: sort schema: type: string default: DESC example: ASC enum: - ASC - DESC responses: 200: content: application/json: schema: type: array items: oneOf: - $ref: "#/components/schemas/FungibleTx" description: OK 400: <<: *API400 401: <<: *API401 500: <<: *API500 security: - X-Api-Key: [ ] x-code-samples: summary: Get ERC20 transactions by address tags: - Blockchain / Fungible Token /v3/blockchain/token/balance/{chain}/{contractAddress}/{address}: get: description: "Get ERC20 Account balance. Returns number of tokens Account holds.
" operationId: Erc20GetBalance parameters: - description: "Network name" in: path name: chain required: true schema: type: string example: "CELO" - description: "Account address" in: path name: address required: true schema: type: string example: "0x3223AEB8404C7525FcAA6C512f91e287AE9FfE7B" - description: "ERC20 contract address" in: path name: contractAddress required: true schema: type: string example: "0x94Ce79B9F001E25BBEbE7C01998A78F7B27D1326" - description: "Type of Ethereum testnet. Defaults to ropsten. Valid only for ETH invocations." in: header name: x-testnet-type required: false schema: default: ethereum-ropsten type: string enum: - ethereum-ropsten - ethereum-rinkeby responses: 200: content: application/json: schema: type: object properties: balance: type: string description: Number of ERC20 tokens in smallest token unit. E.g. token has 10 decimal places, so data returned are 9*10^10. example: "10" description: OK 400: <<: *API400 401: <<: *API401 403: description: Forbidden. The request is authenticated, but it is not possible to required perform operation due to logical error or invalid permissions. content: application/json: schema: $ref: "#/components/schemas/Error403" 500: <<: *API500 security: - X-Api-Key: [ ] x-code-samples: summary: Get ERC20 Account balance tags: - Blockchain / Fungible Token components: securitySchemes: X-Api-Key: description: | To maintain the highest security level, Tatum requires X-API-Key HTTP header. This X-API-Key represents identification of the plan and can be used by 1 developer or per environment. Each X-API-Key is bound to the test or production blockchains. in: header name: x-api-key type: apiKey schemas: ChainDeployErc20: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - XDC - ONE - ALGO symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Initial supply of ERC20 token. If totalCap is not defined, this will be the total cap. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 43 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string fromPrivateKey: description: Private key of Ethereum account address, from which the fee for the deployment of ERC20 will be paid. Private key, or signature Id must be present. type: string example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" maxLength: 66 minLength: 66 nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - name - symbol - address - supply - fromPrivateKey - digits FungibleTx: type: object properties: blockNumber: type: number example: 6541235 description: Block number txId: type: string example: "0x955c1037608c7aecb6d1a3f150ce7d0a80536bcabb0deb69d62f55292cc4c372" description: Transaction ID contractAddress: type: string example: "0x4f54fAD27F7F46C102Cd49b8E75C5593397cd9c3" description: Contract address amount: type: string example: "1" description: Amount of tokens transferred, in smallest decimals from: type: string example: "0x780c3de0aba1b51f04cfe8a5d9d277d4ad032b8d" description: Sender to: type: string example: "0x8cb76aed9c5e336ef961265c6079c14e9cd3d2ea" description: recipient required: - txId - blockNumber - contractAddress - amount - from - to ChainDeployErc20KMS: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - XDC symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 43 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - name - symbol - address - supply - signatureId - digits ChainDeployKcsErc20: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Initial supply of ERC20 token. If totalCap is not defined, this will be the total cap. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 43 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string fromPrivateKey: description: Private key of Ethereum account address, from which the fee for the deployment of ERC20 will be paid. Private key, or signature Id must be present. type: string example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" maxLength: 66 minLength: 66 nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - name - symbol - address - supply - fromPrivateKey - digits ChainDeployKcsErc20KMS: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 43 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - name - symbol - address - supply - signatureId - digits ChainDeployCeloErc20: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 42 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string fromPrivateKey: description: Private key of Ethereum account address, from which the fee for the deployment of ERC20 will be paid. Private key, or signature Id must be present. type: string example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" maxLength: 66 minLength: 66 nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - name - symbol - address - supply - fromPrivateKey - digits - feeCurrency ChainDeployCeloErc20KMS: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO symbol: description: Symbol of the ERC20 token example: ERC_SYMBOL maxLength: 30 minLength: 1 type: string name: description: Name of the ERC20 token example: MyERC20 maxLength: 100 minLength: 1 pattern: ^[a-zA-Z0-9_]+$ type: string totalCap: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string supply: description: Max supply of ERC20 token. maxLength: 38 example: "10000000" pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ type: string digits: description: Number of decimal points example: 18 maximum: 30 minimum: 1 type: number address: description: Address on Ethereum blockchain, where all created ERC20 tokens will be transferred. maxLength: 42 minLength: 42 example: "0xa0Ca9FF38Bad06eBe64f0fDfF279cAE35129F5C6" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - name - symbol - address - supply - signatureId - digits - feeCurrency # ChainCreateTronTrc20: # type: object # properties: # chain: # type: string # example: TRON # description: Chain to work with. # enum: # - TRON # fromPrivateKey: # type: string # minLength: 64 # maxLength: 64 # description: Private key of the address, from which the TRX will be sent. # example: 842E09EB40D8175979EFB0071B28163E11AED0F14BDD84090A4CEFB936EF5701 # recipient: # type: string # minLength: 34 # maxLength: 34 # description: Recipient address of created TRC20 tokens. # example: TYMwiDu22V6XG3yk6W9cTVBz48okKLRczh # name: # type: string # minLength: 1 # maxLength: 100 # description: Name of the token. # example: My token # symbol: # type: string # minLength: 1 # maxLength: 100 # description: Symbol of the token. # example: SYM # totalSupply: # type: number # minimum: 0 # description: Total supply of the tokens. # example: 100000 # decimals: # type: number # minimum: 0 # maximum: 30 # description: Number of decimal places of the token. # example: 10 # required: # - chain # - fromPrivateKey # - name # - recipient # - symbol # - totalSupply # - decimals ChainMintErc20: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - XDC - ONE amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 43 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - to - amount - contractAddress - fromPrivateKey ChainMintKcsErc20: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 43 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - to - amount - contractAddress - fromPrivateKey ChainMintErc20KMS: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - XDC amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 43 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - to - amount - contractAddress - signatureId ChainMintKcsErc20KMS: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 43 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - to - amount - contractAddress - signatureId ChainMintCeloErc20: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 42 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 42 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - to - amount - feeCurrency - contractAddress - fromPrivateKey ChainMintCeloErc20KMS: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount to be minted and transfered to the recipient. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ to: maxLength: 42 minLength: 42 description: Blockchain address to send ERC-20 tokens to. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 42 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - to - amount - feeCurrency - contractAddress - signatureId ApproveErc20: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - ONE amount: description: Amount to be approved for the spender. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ spender: maxLength: 43 minLength: 42 description: Blockchain address of the new spender. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - spender - amount - contractAddress - fromPrivateKey ApproveErc20KMS: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - ONE amount: description: Amount to be approved for the spender. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ spender: maxLength: 43 minLength: 42 description: Blockchain address of the new spender. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 43 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. required: - chain - spender - amount - contractAddress - signatureId ApproveCeloErc20: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount to be approved for the spender. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ spender: maxLength: 42 minLength: 42 description: Blockchain address of the new spender. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 42 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - spender - amount - feeCurrency - contractAddress - fromPrivateKey ApproveCeloErc20KMS: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount to be approved for the spender. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ spender: maxLength: 42 minLength: 42 description: Blockchain address of the new spender. example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string contractAddress: maxLength: 42 minLength: 42 description: Address of ERC-20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - spender - amount - feeCurrency - contractAddress - signatureId ChainBurnErc20: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - XDC - ONE - ALGO amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. required: - chain - contractAddress - fromPrivateKey - amount ChainBurnErc20KMS: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - XDC - ALGO amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. required: - chain - contractAddress - signatureId - amount ChainBurnKcsErc20: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. required: - chain - contractAddress - fromPrivateKey - amount ChainBurnKcsErc20KMS: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. required: - chain - contractAddress - signatureId - amount ChainBurnCeloErc20: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - contractAddress - feeCurrency - fromPrivateKey - amount ChainBurnCeloErc20KMS: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO amount: description: Amount of tokens to be destroyed. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Celo transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - contractAddress - feeCurrency - signatureId - amount ChainTransferAlgoErc20: type: object properties: chain: type: string example: ALGO description: Chain to work with. enum: - ALGO to: maxLength: 58 minLength: 42 description: Blockchain address to send ERC20 token to example: "NTAESFCB3WOD7SAOL42KSPVARLB3JFA3MNX3AESWHYVT2RMYDVZI6YLG4Y" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 1 description: assetIndex - asset index uniquely specifying the asset example: "1" type: string fromPrivateKey: type: string maxLength: 103 example: "72TCV5BRQPBMSAFPYO3CPWVDBYWNGAYNMTW5QHENOMQF7I6QLNMJWCJZ7A3V5YKD7QD6ZZPEHG2PV2ZVVEDDO6BCRGXWIL3DIUMSUCI" minLength: 103 description: Private key of sender address. Private key, or signature Id must be present. required: - chain - currency - to - contractAddress - fromPrivateKey - amount ChainTransferAlgoErc20KMS: type: object properties: chain: type: string example: ALGO description: Chain to work with. enum: - ALGO to: maxLength: 58 minLength: 42 description: Blockchain address to send ERC20 token to example: "TMETT6BXL3QUH7AH5TS6IONU7LVTLKIGG54CFCNPMQXWGRIZFIESZBYWP4" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 1 description: assetIndex - asset index uniquely specifying the asset example: "1" type: string signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. from: maxLength: 58 minLength: 42 description: Blockchain address to send ERC20 token to example: "NTAESFCB3WOD7SAOL42KSPVARLB3JFA3MNX3AESWHYVT2RMYDVZI6YLG4Y" type: string required: - chain - currency - to - contractAddress - signatureId - amount - from ChainTransferEthErc20: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - XDC - ONE to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - currency - to - contractAddress - digits - fromPrivateKey - amount ChainTransferEthErc20KMS: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - MATIC - XDC - ONE to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - currency - to - contractAddress - digits - signatureId - amount ChainTransferKcsEthErc20: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - currency - to - contractAddress - digits - fromPrivateKey - amount ChainTransferKcsEthErc20KMS: type: object properties: chain: type: string example: KCS description: Chain to work with. enum: - KCS to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - currency - to - contractAddress - digits - signatureId - amount ChainTransferBscBep20: type: object properties: chain: type: string example: BSC description: Chain to work with. enum: - BSC to: maxLength: 50 minLength: 1 description: Blockchain address to send BEP20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of BEP20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that BEP20 token has. example: 18 maximum: 30 minimum: 1 type: number fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to BSC transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - to - contractAddress - digits - fromPrivateKey - amount ChainTransferBscBep20KMS: type: object properties: chain: type: string example: BSC description: Chain to work with. enum: - BSC to: maxLength: 50 minLength: 1 description: Blockchain address to send BEP20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of BEP20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that BEP20 token has. example: 18 maximum: 30 minimum: 1 type: number signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to BSC transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - to - contractAddress - digits - signatureId - amount ChainTransferCeloErc20Token: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - to - contractAddress - digits - feeCurrency - fromPrivateKey - amount ChainTransferCeloErc20TokenKMS: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO to: maxLength: 50 minLength: 1 description: Blockchain address to send ERC20 token to example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string amount: description: Amount to be sent. example: "100000" type: string pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ contractAddress: maxLength: 42 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string digits: description: Number of decimal points that ERC20 token has. example: 18 maximum: 30 minimum: 1 type: number signatureId: type: string minLength: 36 maxLength: 36 format: uuid example: 26d3883e-4e17-48b3-a0ee-09a3e484ac83 description: Identifier of the private key associated in signing application. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - to - contractAddress - digits - feeCurrency - signatureId - amount # ChainTransferTronTrc20: # type: object # properties: # chain: # type: string # example: TRON # description: Chain to work with. # enum: # - TRON # fromPrivateKey: # type: string # minLength: 64 # maxLength: 64 # description: Private key of the address, from which the TRX will be sent. # example: 842E09EB40D8175979EFB0071B28163E11AED0F14BDD84090A4CEFB936EF5701 # to: # type: string # minLength: 34 # maxLength: 34 # description: Recipient address of TRON account in Base58 format. # example: TYMwiDu22V6XG3yk6W9cTVBz48okKLRczh # tokenAddress: # type: string # minLength: 34 # maxLength: 34 # description: Address of the TRC20 token to transfer. # example: "TVAEYCmc15awaDRAjUZ1kvcHwQQaoPw2CW" # feeLimit: # type: number # minimum: 0 # description: Fee in TRX to be paid. # example: 0.01 # amount: # description: Amount to be sent in TRX. # example: "100000" # pattern: ^[+]?((\d+(\.\d*)?)|(\.\d+))$ # type: string # required: # - chain # - fromPrivateKey # - tokenAddress # - to # - amount # - feeLimit ChainCallSmartContractMethod: type: object properties: chain: type: string example: ETH description: Chain to work with. enum: - ETH - BSC - XDC contractAddress: maxLength: 43 minLength: 42 description: Address of ERC20 token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string methodName: minLength: 1 maxLength: 500 description: Name of the method to invoke on smart contract. type: string example: transfer methodABI: type: object description: ABI of the method to invoke. params: type: array example: [ '0x632' ] items: type: string description: Parameters of the method to be invoked. fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to Ethereum transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" required: - chain - contractAddress - params - methodABI - fromPrivateKey - methodName CallCeloSmartContractMethod: type: object properties: chain: type: string example: CELO description: Chain to work with. enum: - CELO contractAddress: maxLength: 42 minLength: 42 description: Address of token example: "0x687422eEA2cB73B5d3e242bA5456b782919AFc85" type: string methodName: minLength: 1 maxLength: 500 description: Name of the method to invoke on smart contract. type: string example: transfer methodABI: type: object description: ABI of the method to invoke. params: type: array example: [ '0x632' ] items: type: string description: Parameters of the method to be invoked. fromPrivateKey: type: string maxLength: 66 example: "0x05e150c73f1920ec14caa1e0b6aa09940899678051a78542840c2668ce5080c2" minLength: 66 description: Private key of sender address. Private key, or signature Id must be present. nonce: type: number minimum: 0 description: Nonce to be set to transaction. If not present, last known nonce will be used. fee: description: Custom defined fee. If not present, it will be calculated automatically. type: object required: - gasLimit - gasPrice properties: gasLimit: type: string description: Gas limit for transaction in gas price. pattern: ^[+]?\d+$ example: "40000" gasPrice: type: string description: Gas price in Gwei. pattern: ^[+]?\d+$ example: "20" feeCurrency: type: string description: Currency to pay for transaction gas enum: - CELO - CUSD - CEUR required: - chain - contractAddress - params - methodABI - fromPrivateKey - methodName - feeCurrency