## rd-ESP32S3
> The reference design for the [ESP32-S3-MINI-1-N8](https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf). A module that provides 2.4 GHz b/g/n WiFi and BLE 5 connectivity, MCU, and PCB antenna. 

## Installation

```bash
npm i @typecad/rd_esp32s3
```
### Input Connections
 - power_supply: `Power` - 3.3 volt power supply

### Defined Output Connections
 - i2c: `I2C` - sda:IO8, scl:IO9
 - uart_0: `UART` - rx:RXD0, tx:TXD0, rts:IO15, cts:IO16
 - uart_1: `UART` - rx:IO18, tx:IO17, rts:IO19, cts:IO20
 - usb: `USB` - dp:IO20, dn:IO19

### Components
- esp32: `ESP32_S3_MINI_1_N8` - Main IC
- powerCap: `_0603.Capacitor`- Bulk capacitor
- filterCap: `_0603.Capacitor` - Decoupling capacitor
- enableCap: `_0603.Capacitor`- Part of RC circuit for U1:EN
- pullupResistor: `_0603.Resistor`- Part of RC circuit for U1:EN
- buttonCap: `_0603.Capacitor`- Debounce for SW1
- buttonResistor: `_0603.Resistor` - Debounce for SW1
- resetButton: `Component` - Button to reset IC

## Use

1. Import the package

```ts
import { PCB, Component } from "@typecad/typecad"
import { rd_esp32s3 } from "@typecad/rd_esp32s3";
```

2. (optional) Declare a `Power` object to power the ESP32-S3

```ts
let vin = new Power({...});
```

3. Make the package.

```ts
let typecad = new PCB('rd_esp32s3_implementation');
let esp32s3 = new rd_esp32s3({ pcb: typecad, externalPower: vin });     // pass optional externalPower object
```

4. `::create()` it

```ts
typecad.create(...esp32s3.components);
```

### Passives

The default size for the passive components is 0603, but it can be changed by passing a different set of passives.

```ts
import * as _0805 from '@typecad/passives/0805';
let esp = new rd_esp32s3({schematic: typecad, passives: _0805});

```