/**
 * Copyright Valkey GLIDE Project Contributors - SPDX Identifier: Apache-2.0
 */
import { // eslint-disable-line @typescript-eslint/no-unused-vars
GlideRecord, GlideString, HashDataType, Score, ElementAndScore } from "./BaseClient";
import { AggregationType, BaseScanOptions, BitFieldGet, // eslint-disable-line @typescript-eslint/no-unused-vars
BitFieldSubCommands, // eslint-disable-line @typescript-eslint/no-unused-vars
BitOffsetOptions, BitwiseOperation, Boundary, // eslint-disable-line @typescript-eslint/no-unused-vars
ExpireOptions, FlushMode, FunctionListOptions, // eslint-disable-line @typescript-eslint/no-unused-vars
FunctionRestorePolicy, // eslint-disable-line @typescript-eslint/no-unused-vars
GeoAddOptions, // eslint-disable-line @typescript-eslint/no-unused-vars
GeoSearchResultOptions, GeoSearchShape, GeoSearchStoreResultOptions, GeoUnit, GeospatialData, HScanOptions, InfoOptions, InsertPosition, KeyWeight, LPosOptions, ListDirection, LolwutOptions, // eslint-disable-line @typescript-eslint/no-unused-vars
RangeByIndex, RangeByLex, RangeByScore, RestoreOptions, ScoreFilter, SearchOrigin, SetOptions, SortOptions, StreamAddOptions, StreamClaimOptions, StreamGroupOptions, StreamPendingOptions, StreamReadGroupOptions, StreamReadOptions, StreamTrimOptions, TimeUnit, ZAddOptions, ZScanOptions } from "./Commands";
import { command_request } from "./ProtobufMessage";
/**
 * Base class encompassing shared commands for both standalone and cluster mode implementations in a transaction.
 * Transactions allow the execution of a group of commands in a single step.
 *
 * Command Response:
 *  An array of command responses is returned by the client exec command, in the order they were given.
 *  Each element in the array represents a command given to the transaction.
 *  The response for each command depends on the executed Valkey command.
 *  Specific response types are documented alongside each method.
 *
 * @example
 * ```typescript
 * const transaction = new BaseTransaction()
 *    .set("key", "value")
 *    .get("key");
 * const result = await client.exec(transaction);
 * console.log(result); // Output: ['OK', 'value']
 * ```
 */
export declare class BaseTransaction<T extends BaseTransaction<T>> {
    /**
     * @internal
     */
    readonly commands: command_request.Command[];
    /**
     * Array of command indexes indicating commands that need to be converted into a `Set` within the transaction.
     * @internal
     */
    readonly setCommandsIndexes: number[];
    /**
     * Adds a command to the transaction and returns the transaction instance.
     * @param command - The command to add.
     * @param shouldConvertToSet - Indicates if the command should be converted to a `Set`.
     * @returns The updated transaction instance.
     */
    protected addAndReturn(command: command_request.Command, shouldConvertToSet?: boolean): T;
    /** Get the value associated with the given key, or null if no such value exists.
     * @see {@link https://valkey.io/commands/get/|valkey.io} for details.
     *
     * @param key - The key to retrieve from the database.
     *
     * Command Response - If `key` exists, returns the value of `key`. Otherwise, return null.
     */
    get(key: GlideString): T;
    /**
     * Get the value of `key` and optionally set its expiration. `GETEX` is similar to {@link get}.
     *
     * @see {@link https://valkey.io/commands/getex/|valkey.io} for more details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key to retrieve from the database.
     * @param options - (Optional) set expiriation to the given key.
     *                  "persist" will retain the time to live associated with the key. Equivalent to `PERSIST` in the VALKEY API.
     *                  Otherwise, a {@link TimeUnit} and duration of the expire time should be specified.
     *
     * Command Response - If `key` exists, returns the value of `key` as a `string`. Otherwise, return `null`.
     */
    getex(key: GlideString, options?: "persist" | {
        type: TimeUnit;
        duration: number;
    }): T;
    /**
     * Gets a string value associated with the given `key`and deletes the key.
     *
     * @see {@link https://valkey.io/commands/getdel/|valkey.io} for details.
     *
     * @param key - The key to retrieve from the database.
     *
     * Command Response - If `key` exists, returns the `value` of `key`. Otherwise, return `null`.
     */
    getdel(key: GlideString): T;
    /**
     * Returns the substring of the string value stored at `key`, determined by the byte offsets
     * `start` and `end` (both are inclusive). Negative offsets can be used in order to provide
     * an offset starting from the end of the string. So `-1` means the last character, `-2` the
     * penultimate and so forth. If `key` does not exist, an empty string is returned. If `start`
     * or `end` are out of range, returns the substring within the valid range of the string.
     *
     * @see {@link https://valkey.io/commands/getrange/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param start - The starting byte offset.
     * @param end - The ending byte offset.
     *
     * Command Response - substring extracted from the value stored at `key`.
     */
    getrange(key: GlideString, start: number, end: number): T;
    /** Set the given key with the given value. Return value is dependent on the passed options.
     * @see {@link https://valkey.io/commands/set/|valkey.io} for details.
     *
     * @param key - The key to store.
     * @param value - The value to store with the given key.
     * @param options - The set options.
     *
     * Command Response - If the value is successfully set, return OK.
     * If `value` isn't set because of `onlyIfExists` or `onlyIfDoesNotExist` conditions, return null.
     * If `returnOldValue` is set, return the old value as a string.
     */
    set(key: GlideString, value: GlideString, options?: SetOptions): T;
    /**
     * Pings the server.
     *
     * @see {@link https://valkey.io/commands/ping/|valkey.io} for details.
     *
     * @param message - (Optional) A message to include in the PING command.
     * - If not provided, the server will respond with `"PONG"`.
     * - If provided, the server will respond with a copy of the message.
     *
     * Command Response - `"PONG"` if `message` is not provided, otherwise return a copy of `message`.
     */
    ping(message?: GlideString): T;
    /**
     * Gets information and statistics about the server.
     *
     * @see {@link https://valkey.io/commands/info/|valkey.io} for details.
     *
     * @param sections - (Optional) A list of {@link InfoOptions} values specifying which sections of information to retrieve.
     *     When no parameter is provided, {@link InfoOptions.Default|Default} is assumed.
     *
     * Command Response - A string containing the information for the sections requested.
     */
    info(sections?: InfoOptions[]): T;
    /**
     * Removes the specified keys. A key is ignored if it does not exist.
     *
     * @see {@link https://valkey.io/commands/del/|valkey.io} for details.
     *
     * @param keys - A list of keys to be deleted from the database.
     *
     * Command Response - The number of keys that were removed.
     */
    del(keys: GlideString[]): T;
    /**
     * Serialize the value stored at `key` in a Valkey-specific format and return it to the user.
     *
     * @see {@link https://valkey.io/commands/dump/|valkey.io} for details.
     * @remarks To execute a transaction with a `dump` command, the `exec` command requires `Decoder.Bytes` to handle the response.
     *
     * @param key - The `key` to serialize.
     *
     * Command Response - The serialized value of the data stored at `key`. If `key` does not exist, `null` will be returned.
     */
    dump(key: GlideString): T;
    /**
     * Create a `key` associated with a `value` that is obtained by deserializing the provided
     * serialized `value` (obtained via {@link dump}).
     *
     * @see {@link https://valkey.io/commands/restore/|valkey.io} for details.
     * @remarks `options.idletime` and `options.frequency` modifiers cannot be set at the same time.
     *
     * @param key - The `key` to create.
     * @param ttl - The expiry time (in milliseconds). If `0`, the `key` will persist.
     * @param value - The serialized value to deserialize and assign to `key`.
     * @param options - (Optional) Restore options {@link RestoreOptions}.
     *
     * Command Response - Return "OK" if the `key` was successfully restored with a `value`.
     */
    restore(key: GlideString, ttl: number, value: Buffer, options?: RestoreOptions): T;
    /**
     * Gets the name of the connection on which the transaction is being executed.
     *
     * @see {@link https://valkey.io/commands/client-getname/|valkey.io} for details.
     *
     * Command Response - The name of the client connection as a string if a name is set, or null if no name is assigned.
     */
    clientGetName(): T;
    /**
     * Rewrites the configuration file with the current configuration.
     *
     * @see {@link https://valkey.io/commands/select/|valkey.io} for details.
     *
     * Command Response - "OK" when the configuration was rewritten properly. Otherwise, the transaction fails with an error.
     */
    configRewrite(): T;
    /**
     * Resets the statistics reported by Valkey using the `INFO` and `LATENCY HISTOGRAM` commands.
     *
     * @see {@link https://valkey.io/commands/config-resetstat/|valkey.io} for details.
     *
     * Command Response - always "OK".
     */
    configResetStat(): T;
    /** Retrieve the values of multiple keys.
     * @see {@link https://valkey.io/commands/mget/|valkey.io} for details.
     *
     * @param keys - A list of keys to retrieve values for.
     *
     * Command Response - A list of values corresponding to the provided keys. If a key is not found,
     * its corresponding value in the list will be null.
     */
    mget(keys: GlideString[]): T;
    /** Set multiple keys to multiple values in a single atomic operation.
     * @see {@link https://valkey.io/commands/mset/|valkey.io} for details.
     *
     * @param keysAndValues - A list of key-value pairs to set.
     *
     * Command Response - always "OK".
     */
    mset(keysAndValues: Record<string, GlideString> | GlideRecord<GlideString>): T;
    /**
     * Sets multiple keys to values if the key does not exist. The operation is atomic, and if one or
     * more keys already exist, the entire operation fails.
     *
     * @see {@link https://valkey.io/commands/msetnx/|valkey.io} for details.
     *
     * @param keysAndValues - A list of key-value pairs to set.
     * Command Response - `true` if all keys were set. `false` if no key was set.
     */
    msetnx(keysAndValues: Record<string, GlideString> | GlideRecord<GlideString>): T;
    /** Increments the number stored at `key` by one. If `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/incr/|valkey.io} for details.
     *
     * @param key - The key to increment its value.
     *
     * Command Response - the value of `key` after the increment.
     */
    incr(key: GlideString): T;
    /** Increments the number stored at `key` by `amount`. If `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/incrby/|valkey.io} for details.
     *
     * @param key - The key to increment its value.
     * @param amount - The amount to increment.
     *
     * Command Response - the value of `key` after the increment.
     */
    incrBy(key: GlideString, amount: number): T;
    /** Increment the string representing a floating point number stored at `key` by `amount`.
     * By using a negative amount value, the result is that the value stored at `key` is decremented.
     * If `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/incrbyfloat/|valkey.io} for details.
     *
     * @param key - The key to increment its value.
     * @param amount - The amount to increment.
     *
     * Command Response - the value of `key` after the increment.
     *
     */
    incrByFloat(key: GlideString, amount: number): T;
    /**
     * Returns the current connection ID.
     *
     * @see {@link https://valkey.io/commands/client-id/|valkey.io} for details.
     *
     * Command Response - The ID of the connection.
     */
    clientId(): T;
    /** Decrements the number stored at `key` by one. If `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/decr/|valkey.io} for details.
     *
     * @param key - The key to decrement its value.
     *
     * Command Response - the value of `key` after the decrement.
     */
    decr(key: GlideString): T;
    /** Decrements the number stored at `key` by `amount`. If `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/decrby/|valkey.io} for details.
     *
     * @param key - The key to decrement its value.
     * @param amount - The amount to decrement.
     *
     * Command Response - the value of `key` after the decrement.
     */
    decrBy(key: GlideString, amount: number): T;
    /**
     * Perform a bitwise operation between multiple keys (containing string values) and store the result in the
     * `destination`.
     *
     * @see {@link https://valkey.io/commands/bitop/|valkey.io} for details.
     *
     * @param operation - The bitwise operation to perform.
     * @param destination - The key that will store the resulting string.
     * @param keys - The list of keys to perform the bitwise operation on.
     *
     * Command Response - The size of the string stored in `destination`.
     */
    bitop(operation: BitwiseOperation, destination: GlideString, keys: GlideString[]): T;
    /**
     * Returns the bit value at `offset` in the string value stored at `key`. `offset` must be greater than or equal
     * to zero.
     *
     * @see {@link https://valkey.io/commands/getbit/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param offset - The index of the bit to return.
     *
     * Command Response - The bit at the given `offset` of the string. Returns `0` if the key is empty or if the
     * `offset` exceeds the length of the string.
     */
    getbit(key: GlideString, offset: number): T;
    /**
     * Sets or clears the bit at `offset` in the string value stored at `key`. The `offset` is a zero-based index, with
     * `0` being the first element of the list, `1` being the next element, and so on. The `offset` must be less than
     * `2^32` and greater than or equal to `0`. If a key is non-existent then the bit at `offset` is set to `value` and
     * the preceding bits are set to `0`.
     *
     * @see {@link https://valkey.io/commands/setbit/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param offset - The index of the bit to be set.
     * @param value - The bit value to set at `offset`. The value must be `0` or `1`.
     *
     * Command Response - The bit value that was previously stored at `offset`.
     */
    setbit(key: GlideString, offset: number, value: number): T;
    /**
     * Returns the position of the first bit matching the given `bit` value. The optional starting offset
     * `start` is a zero-based index, with `0` being the first byte of the list, `1` being the next byte and so on.
     * The offset can also be a negative number indicating an offset starting at the end of the list, with `-1` being
     * the last byte of the list, `-2` being the penultimate, and so on.
     *
     * @see {@link https://valkey.io/commands/bitpos/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param bit - The bit value to match. Must be `0` or `1`.
     * @param options - (Optional) The {@link BitOffsetOptions}.
     *
     * Command Response - The position of the first occurrence of `bit` in the binary value of the string held at `key`.
     *      If `start` was provided, the search begins at the offset indicated by `start`.
     */
    bitpos(key: GlideString, bit: number, options?: BitOffsetOptions): T;
    /**
     * Reads or modifies the array of bits representing the string that is held at `key` based on the specified
     * `subcommands`.
     *
     * @see {@link https://valkey.io/commands/bitfield/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param subcommands - The subcommands to be performed on the binary value of the string at `key`, which could be
     *      any of the following:
     *
     * - {@link BitFieldGet}
     * - {@link BitFieldSet}
     * - {@link BitFieldIncrBy}
     * - {@link BitFieldOverflow}
     *
     * Command Response - An array of results from the executed subcommands:
     *
     * - {@link BitFieldGet} returns the value in {@link BitOffset} or {@link BitOffsetMultiplier}.
     * - {@link BitFieldSet} returns the old value in {@link BitOffset} or {@link BitOffsetMultiplier}.
     * - {@link BitFieldIncrBy} returns the new value in {@link BitOffset} or {@link BitOffsetMultiplier}.
     * - {@link BitFieldOverflow} determines the behavior of the {@link BitFieldSet} and {@link BitFieldIncrBy}
     *   subcommands when an overflow or underflow occurs. {@link BitFieldOverflow} does not return a value and
     *   does not contribute a value to the array response.
     */
    bitfield(key: GlideString, subcommands: BitFieldSubCommands[]): T;
    /**
     * Reads the array of bits representing the string that is held at `key` based on the specified `subcommands`.
     *
     * @see {@link https://valkey.io/commands/bitfield_ro/|valkey.io} for details.
     * @remarks Since Valkey version 6.0.0.
     *
     * @param key - The key of the string.
     * @param subcommands - The {@link BitFieldGet} subcommands to be performed.
     *
     * Command Response - An array of results from the {@link BitFieldGet} subcommands.
     *
     */
    bitfieldReadOnly(key: GlideString, subcommands: BitFieldGet[]): T;
    /**
     * Reads the configuration parameters of the running server.
     * Starting from server version 7, command supports multiple parameters.
     *
     * @see {@link https://valkey.io/commands/config-get/|valkey.io} for details.
     *
     * @param parameters - A list of configuration parameter names to retrieve values for.
     *
     * Command Response - A map of values corresponding to the configuration parameters.
     *
     */
    configGet(parameters: string[]): T;
    /**
     * Sets configuration parameters to the specified values.
     * Starting from server version 7, command supports multiple parameters.
     *
     * @see {@link https://valkey.io/commands/config-set/|valkey.io} for details.
     *
     * @param parameters - A map consisting of configuration parameters and their respective values to set.
     *
     * Command Response - "OK" when the configuration was set properly. Otherwise, the transaction fails with an error.
     */
    configSet(parameters: Record<string, GlideString>): T;
    /** Retrieve the value associated with `field` in the hash stored at `key`.
     * @see {@link https://valkey.io/commands/hget/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param field - The field in the hash stored at `key` to retrieve from the database.
     *
     * Command Response - the value associated with `field`, or null when `field` is not present in the hash or `key` does not exist.
     */
    hget(key: GlideString, field: GlideString): T;
    /** Sets the specified fields to their respective values in the hash stored at `key`.
     * @see {@link https://valkey.io/commands/hset/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param fieldValueList - A list of field names and their values.
     * to be set in the hash stored at the specified key.
     *
     * Command Response - The number of fields that were added.
     */
    hset(key: GlideString, fieldsAndValues: HashDataType | Record<string, GlideString>): T;
    /**
     * Returns all field names in the hash stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hkeys/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     *
     * Command Response - A list of field names for the hash, or an empty list when the key does not exist.
     */
    hkeys(key: GlideString): T;
    /** Sets `field` in the hash stored at `key` to `value`, only if `field` does not yet exist.
     * If `key` does not exist, a new key holding a hash is created.
     * If `field` already exists, this operation has no effect.
     * @see {@link https://valkey.io/commands/hsetnx/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param field - The field to set the value for.
     * @param value - The value to set.
     *
     * Command Response - `true` if the field was set, `false` if the field already existed and was not set.
     */
    hsetnx(key: GlideString, field: GlideString, value: GlideString): T;
    /** Removes the specified fields from the hash stored at `key`.
     * Specified fields that do not exist within this hash are ignored.
     * @see {@link https://valkey.io/commands/hdel/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param fields - The fields to remove from the hash stored at `key`.
     *
     * Command Response - the number of fields that were removed from the hash, not including specified but non existing fields.
     * If `key` does not exist, it is treated as an empty hash and it returns 0.
     */
    hdel(key: GlideString, fields: GlideString[]): T;
    /** Returns the values associated with the specified fields in the hash stored at `key`.
     * @see {@link https://valkey.io/commands/hmget/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param fields - The fields in the hash stored at `key` to retrieve from the database.
     *
     * Command Response - a list of values associated with the given fields, in the same order as they are requested.
     * For every field that does not exist in the hash, a null value is returned.
     * If `key` does not exist, it is treated as an empty hash and it returns a list of null values.
     */
    hmget(key: GlideString, fields: GlideString[]): T;
    /** Returns if `field` is an existing field in the hash stored at `key`.
     * @see {@link https://valkey.io/commands/hexists/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param field - The field to check in the hash stored at `key`.
     *
     * Command Response - `true` if the hash contains `field`. If the hash does not contain `field`, or if `key` does not exist,
     * the command response will be `false`.
     */
    hexists(key: GlideString, field: GlideString): T;
    /**
     * Returns all fields and values of the hash stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hgetall/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     *
     * Command Response - A list of fields and their values stored in the hash.
     * If `key` does not exist, it returns an empty list.
     */
    hgetall(key: GlideString): T;
    /** Increments the number stored at `field` in the hash stored at `key` by `increment`.
     * By using a negative increment value, the value stored at `field` in the hash stored at `key` is decremented.
     * If `field` or `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/hincrby/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param amount - The amount to increment.
     * @param field - The field in the hash stored at `key` to increment its value.
     *
     * Command Response - the value of `field` in the hash stored at `key` after the increment.
     */
    hincrBy(key: GlideString, field: GlideString, amount: number): T;
    /** Increment the string representing a floating point number stored at `field` in the hash stored at `key` by `increment`.
     * By using a negative increment value, the value stored at `field` in the hash stored at `key` is decremented.
     * If `field` or `key` does not exist, it is set to 0 before performing the operation.
     * @see {@link https://valkey.io/commands/hincrbyfloat/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param amount - The amount to increment.
     * @param field - The field in the hash stored at `key` to increment its value.
     *
     * Command Response - the value of `field` in the hash stored at `key` after the increment.
     */
    hincrByFloat(key: GlideString, field: GlideString, amount: number): T;
    /** Returns the number of fields contained in the hash stored at `key`.
     * @see {@link https://valkey.io/commands/hlen/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     *
     * Command Response - The number of fields in the hash, or 0 when the key does not exist.
     */
    hlen(key: GlideString): T;
    /** Returns all values in the hash stored at key.
     * @see {@link https://valkey.io/commands/hvals/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     *
     * Command Response - a list of values in the hash, or an empty list when the key does not exist.
     */
    hvals(key: GlideString): T;
    /**
     * Returns the string length of the value associated with `field` in the hash stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hstrlen/|valkey.io} for details.
     *
     * @param key - The key of the hash.
     * @param field - The field in the hash.
     *
     * Command Response - The string length or `0` if `field` or `key` does not exist.
     */
    hstrlen(key: GlideString, field: GlideString): T;
    /**
     * Returns a random field name from the hash value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hrandfield/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the hash.
     *
     * Command Response - A random field name from the hash stored at `key`, or `null` when
     *     the key does not exist.
     */
    hrandfield(key: GlideString): T;
    /**
     * Iterates incrementally over a hash.
     *
     * @see {@link https://valkey.io/commands/hscan/|valkey.io} for more details.
     *
     * @param key - The key of the set.
     * @param cursor - The cursor that points to the next iteration of results. A value of `"0"` indicates the start of the search.
     * @param options - (Optional) The {@link HScanOptions}.
     *
     * Command Response - An array of the `cursor` and the subset of the hash held by `key`.
     * The first element is always the `cursor` for the next iteration of results. `"0"` will be the `cursor`
     * returned on the last iteration of the hash. The second element is always an array of the subset of the
     * hash held in `key`. The array in the second element is a flattened series of string pairs,
     * where the value is at even indices and the value is at odd indices.
     * If `options.noValues` is set to `true`, the second element will only contain the fields without the values.
     */
    hscan(key: GlideString, cursor: string, options?: HScanOptions): T;
    /**
     * Retrieves up to `count` random field names from the hash value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hrandfield/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the hash.
     * @param count - The number of field names to return.
     *
     *     If `count` is positive, returns unique elements. If negative, allows for duplicates.
     *
     * Command Response - An `array` of random field names from the hash stored at `key`,
     *     or an `empty array` when the key does not exist.
     */
    hrandfieldCount(key: GlideString, count: number): T;
    /**
     * Retrieves up to `count` random field names along with their values from the hash
     * value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/hrandfield/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the hash.
     * @param count - The number of field names to return.
     *
     *     If `count` is positive, returns unique elements. If negative, allows for duplicates.
     *
     * Command Response - A 2D `array` of `[fieldName, value]` `arrays`, where `fieldName` is a random
     *     field name from the hash and `value` is the associated value of the field name.
     *     If the hash does not exist or is empty, the response will be an empty `array`.
     */
    hrandfieldWithValues(key: GlideString, count: number): T;
    /** Inserts all the specified values at the head of the list stored at `key`.
     * `elements` are inserted one after the other to the head of the list, from the leftmost element to the rightmost element.
     * If `key` does not exist, it is created as empty list before performing the push operations.
     * @see {@link https://valkey.io/commands/lpush/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param elements - The elements to insert at the head of the list stored at `key`.
     *
     * Command Response - the length of the list after the push operations.
     */
    lpush(key: GlideString, elements: GlideString[]): T;
    /**
     * Inserts specified values at the head of the `list`, only if `key` already
     * exists and holds a list.
     *
     * @see {@link https://valkey.io/commands/lpushx/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param elements - The elements to insert at the head of the list stored at `key`.
     *
     * Command Response - The length of the list after the push operation.
     */
    lpushx(key: GlideString, elements: GlideString[]): T;
    /** Removes and returns the first elements of the list stored at `key`.
     * The command pops a single element from the beginning of the list.
     * @see {@link https://valkey.io/commands/lpop/|valkey.io} for details.
     *
     * @param key - The key of the list.
     *
     * Command Response - The value of the first element.
     * If `key` does not exist null will be returned.
     */
    lpop(key: GlideString): T;
    /** Removes and returns up to `count` elements of the list stored at `key`, depending on the list's length.
     * @see {@link https://valkey.io/commands/lpop/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param count - The count of the elements to pop from the list.
     *
     * Command Response - A list of the popped elements will be returned depending on the list's length.
     * If `key` does not exist null will be returned.
     */
    lpopCount(key: GlideString, count: number): T;
    /** Returns the specified elements of the list stored at `key`.
     * The offsets `start` and `end` are zero-based indexes, with 0 being the first element of the list, 1 being the next element and so on.
     * These offsets can also be negative numbers indicating offsets starting at the end of the list,
     * with -1 being the last element of the list, -2 being the penultimate, and so on.
     * @see {@link https://valkey.io/commands/lrange/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param start - The starting point of the range.
     * @param end - The end of the range.
     *
     * Command Response - list of elements in the specified range.
     * If `start` exceeds the end of the list, or if `start` is greater than `end`, an empty list will be returned.
     * If `end` exceeds the actual end of the list, the range will stop at the actual end of the list.
     * If `key` does not exist an empty list will be returned.
     */
    lrange(key: GlideString, start: number, end: number): T;
    /** Returns the length of the list stored at `key`.
     * @see {@link https://valkey.io/commands/llen/|valkey.io} for details.
     *
     * @param key - The key of the list.
     *
     * Command Response - the length of the list at `key`.
     * If `key` does not exist, it is interpreted as an empty list and 0 is returned.
     */
    llen(key: GlideString): T;
    /**
     * Atomically pops and removes the left/right-most element to the list stored at `source`
     * depending on `whereFrom`, and pushes the element at the first/last element of the list
     * stored at `destination` depending on `whereTo`, see {@link ListDirection}.
     *
     * @see {@link https://valkey.io/commands/lmove/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param source - The key to the source list.
     * @param destination - The key to the destination list.
     * @param whereFrom - The {@link ListDirection} to remove the element from.
     * @param whereTo - The {@link ListDirection} to add the element to.
     *
     * Command Response - The popped element, or `null` if `source` does not exist.
     */
    lmove(source: GlideString, destination: GlideString, whereFrom: ListDirection, whereTo: ListDirection): T;
    /**
     *
     * Blocks the connection until it pops atomically and removes the left/right-most element to the
     * list stored at `source` depending on `whereFrom`, and pushes the element at the first/last element
     * of the list stored at `destination` depending on `whereTo`.
     * `BLMOVE` is the blocking variant of {@link lmove}.
     *
     * @see {@link https://valkey.io/commands/blmove/|valkey.io} for details.
     * @remarks When in cluster mode, both `source` and `destination` must map to the same hash slot.
     * @remarks `BLMOVE` is a client blocking command, see {@link https://github.com/valkey-io/valkey-glide/wiki/General-Concepts#blocking-commands|Valkey Glide Wiki} for more details and best practices.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param source - The key to the source list.
     * @param destination - The key to the destination list.
     * @param whereFrom - The {@link ListDirection} to remove the element from.
     * @param whereTo - The {@link ListDirection} to add the element to.
     * @param timeout - The number of seconds to wait for a blocking operation to complete. A value of `0` will block indefinitely.
     *
     * Command Response - The popped element, or `null` if `source` does not exist or if the operation timed-out.
     */
    blmove(source: GlideString, destination: GlideString, whereFrom: ListDirection, whereTo: ListDirection, timeout: number): T;
    /**
     * Sets the list element at `index` to `element`.
     * The index is zero-based, so `0` means the first element, `1` the second element and so on.
     * Negative indices can be used to designate elements starting at the tail of
     * the list. Here, `-1` means the last element, `-2` means the penultimate and so forth.
     *
     * @see {@link https://valkey.io/commands/lset/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param index - The index of the element in the list to be set.
     * @param element - The new element to set at the specified index.
     *
     * Command Response - Always "OK".
     */
    lset(key: GlideString, index: number, element: GlideString): T;
    /** Trim an existing list so that it will contain only the specified range of elements specified.
     * The offsets `start` and `end` are zero-based indexes, with 0 being the first element of the list, 1 being the next element and so on.
     * These offsets can also be negative numbers indicating offsets starting at the end of the list,
     * with -1 being the last element of the list, -2 being the penultimate, and so on.
     * @see {@link https://valkey.io/commands/ltrim/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param start - The starting point of the range.
     * @param end - The end of the range.
     *
     * Command Response - always "OK".
     * If `start` exceeds the end of the list, or if `start` is greater than `end`, the result will be an empty list (which causes key to be removed).
     * If `end` exceeds the actual end of the list, it will be treated like the last element of the list.
     * If `key` does not exist the command will be ignored.
     */
    ltrim(key: GlideString, start: number, end: number): T;
    /** Removes the first `count` occurrences of elements equal to `element` from the list stored at `key`.
     * If `count` is positive : Removes elements equal to `element` moving from head to tail.
     * If `count` is negative : Removes elements equal to `element` moving from tail to head.
     * If `count` is 0 or `count` is greater than the occurrences of elements equal to `element`: Removes all elements equal to `element`.
     *
     * @param key - The key of the list.
     * @param count - The count of the occurrences of elements equal to `element` to remove.
     * @param element - The element to remove from the list.
     *
     * Command Response - the number of the removed elements.
     * If `key` does not exist, 0 is returned.
     */
    lrem(key: GlideString, count: number, element: GlideString): T;
    /** Inserts all the specified values at the tail of the list stored at `key`.
     * `elements` are inserted one after the other to the tail of the list, from the leftmost element to the rightmost element.
     * If `key` does not exist, it is created as empty list before performing the push operations.
     * @see {@link https://valkey.io/commands/rpush/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param elements - The elements to insert at the tail of the list stored at `key`.
     *
     * Command Response - the length of the list after the push operations.
     */
    rpush(key: GlideString, elements: GlideString[]): T;
    /**
     * Inserts specified values at the tail of the `list`, only if `key` already
     * exists and holds a list.
     *
     * @see {@link https://valkey.io/commands/rpushx/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param elements - The elements to insert at the tail of the list stored at `key`.
     *
     * Command Response - The length of the list after the push operation.
     */
    rpushx(key: GlideString, elements: GlideString[]): T;
    /** Removes and returns the last elements of the list stored at `key`.
     * The command pops a single element from the end of the list.
     * @see {@link https://valkey.io/commands/rpop/|valkey.io} for details.
     *
     * @param key - The key of the list.
     *
     * Command Response - The value of the last element.
     * If `key` does not exist null will be returned.
     */
    rpop(key: GlideString): T;
    /** Removes and returns up to `count` elements from the list stored at `key`, depending on the list's length.
     * @see {@link https://valkey.io/commands/rpop/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param count - The count of the elements to pop from the list.
     *
     * Command Response - A list of popped elements will be returned depending on the list's length.
     * If `key` does not exist null will be returned.
     */
    rpopCount(key: GlideString, count: number): T;
    /** Adds the specified members to the set stored at `key`. Specified members that are already a member of this set are ignored.
     * If `key` does not exist, a new set is created before adding `members`.
     * @see {@link https://valkey.io/commands/sadd/|valkey.io} for details.
     *
     * @param key - The key to store the members to its set.
     * @param members - A list of members to add to the set stored at `key`.
     *
     * Command Response - the number of members that were added to the set, not including all the members already present in the set.
     */
    sadd(key: GlideString, members: GlideString[]): T;
    /** Removes the specified members from the set stored at `key`. Specified members that are not a member of this set are ignored.
     * @see {@link https://valkey.io/commands/srem/|valkey.io} for details.
     *
     * @param key - The key to remove the members from its set.
     * @param members - A list of members to remove from the set stored at `key`.
     *
     * Command Response - the number of members that were removed from the set, not including non existing members.
     * If `key` does not exist, it is treated as an empty set and this command returns 0.
     */
    srem(key: GlideString, members: GlideString[]): T;
    /**
     * Iterates incrementally over a set.
     *
     * @see {@link https://valkey.io/commands/sscan} for details.
     *
     * @param key - The key of the set.
     * @param cursor - The cursor that points to the next iteration of results. A value of `"0"` indicates the start of the search.
     * @param options - The (Optional) {@link BaseScanOptions}.
     *
     * Command Response -  An array of the cursor and the subset of the set held by `key`. The first element is always the `cursor` and for the next iteration of results.
     * The `cursor` will be `"0"` on the last iteration of the set. The second element is always an array of the subset of the set held in `key`.
     */
    sscan(key: GlideString, cursor: GlideString, options?: BaseScanOptions): T;
    /** Returns all the members of the set value stored at `key`.
     * @see {@link https://valkey.io/commands/smembers/|valkey.io} for details.
     *
     * @param key - The key to return its members.
     *
     * Command Response - all members of the set.
     * If `key` does not exist, it is treated as an empty set and this command returns empty list.
     */
    smembers(key: GlideString): T;
    /** Moves `member` from the set at `source` to the set at `destination`, removing it from the source set.
     * Creates a new destination set if needed. The operation is atomic.
     * @see {@link https://valkey.io/commands/smove/|valkey.io} for more details.
     *
     * @param source - The key of the set to remove the element from.
     * @param destination - The key of the set to add the element to.
     * @param member - The set element to move.
     *
     * Command Response - `true` on success, or `false` if the `source` set does not exist or the element is not a member of the source set.
     */
    smove(source: GlideString, destination: GlideString, member: GlideString): T;
    /** Returns the set cardinality (number of elements) of the set stored at `key`.
     * @see {@link https://valkey.io/commands/scard/|valkey.io} for details.
     *
     * @param key - The key to return the number of its members.
     *
     * Command Response - the cardinality (number of elements) of the set, or 0 if key does not exist.
     */
    scard(key: GlideString): T;
    /** Gets the intersection of all the given sets.
     * When in cluster mode, all `keys` must map to the same hash slot.
     * @see {@link https://valkey.io/commands/sinter/|valkey.io} for details.
     *
     * @param keys - The `keys` of the sets to get the intersection.
     *
     * Command Response - A set of members which are present in all given sets.
     * If one or more sets do not exist, an empty set will be returned.
     */
    sinter(keys: GlideString[]): T;
    /**
     * Gets the cardinality of the intersection of all the given sets.
     *
     * @see {@link https://valkey.io/commands/sintercard/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - The keys of the sets.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `limit`: the limit for the intersection cardinality value. If not specified, or set to `0`, no limit is used.
     *
     * Command Response - The cardinality of the intersection result. If one or more sets do not exist, `0` is returned.
     */
    sintercard(keys: GlideString[], options?: {
        limit?: number;
    }): T;
    /**
     * Stores the members of the intersection of all given sets specified by `keys` into a new set at `destination`.
     *
     * @see {@link https://valkey.io/commands/sinterstore/|valkey.io} for details.
     *
     * @param destination - The key of the destination set.
     * @param keys - The keys from which to retrieve the set members.
     *
     * Command Response - The number of elements in the resulting set.
     */
    sinterstore(destination: GlideString, keys: GlideString[]): T;
    /**
     * Computes the difference between the first set and all the successive sets in `keys`.
     *
     * @see {@link https://valkey.io/commands/sdiff/|valkey.io} for details.
     *
     * @param keys - The keys of the sets to diff.
     *
     * Command Response - A `Set` of elements representing the difference between the sets.
     * If a key in `keys` does not exist, it is treated as an empty set.
     */
    sdiff(keys: GlideString[]): T;
    /**
     * Stores the difference between the first set and all the successive sets in `keys` into a new set at `destination`.
     *
     * @see {@link https://valkey.io/commands/sdiffstore/|valkey.io} for details.
     *
     * @param destination - The key of the destination set.
     * @param keys - The keys of the sets to diff.
     *
     * Command Response - The number of elements in the resulting set.
     */
    sdiffstore(destination: GlideString, keys: GlideString[]): T;
    /**
     * Gets the union of all the given sets.
     *
     * @see {@link https://valkey.io/commands/sunion/|valkey.io} for details.
     *
     * @param keys - The keys of the sets.
     *
     * Command Response - A `Set` of members which are present in at least one of the given sets.
     * If none of the sets exist, an empty `Set` will be returned.
     */
    sunion(keys: GlideString[]): T;
    /**
     * Stores the members of the union of all given sets specified by `keys` into a new set
     * at `destination`.
     *
     * @see {@link https://valkey.io/commands/sunionstore/|valkey.io} for details.
     *
     * @param destination - The key of the destination set.
     * @param keys - The keys from which to retrieve the set members.
     *
     * Command Response - The number of elements in the resulting set.
     */
    sunionstore(destination: GlideString, keys: GlideString[]): T;
    /** Returns if `member` is a member of the set stored at `key`.
     * @see {@link https://valkey.io/commands/sismember/|valkey.io} for details.
     *
     * @param key - The key of the set.
     * @param member - The member to check for existence in the set.
     *
     * Command Response - `true` if the member exists in the set, `false` otherwise.
     * If `key` doesn't exist, it is treated as an empty set and the command returns `false`.
     */
    sismember(key: GlideString, member: GlideString): T;
    /**
     * Checks whether each member is contained in the members of the set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/smismember/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the set to check.
     * @param members - A list of members to check for existence in the set.
     *
     * Command Response - An `array` of `boolean` values, each indicating if the respective member exists in the set.
     */
    smismember(key: GlideString, members: GlideString[]): T;
    /** Removes and returns one random member from the set value store at `key`.
     * @see {@link https://valkey.io/commands/spop/|valkey.io} for details.
     * To pop multiple members, see `spopCount`.
     *
     * @param key - The key of the set.
     *
     * Command Response - the value of the popped member.
     * If `key` does not exist, null will be returned.
     */
    spop(key: GlideString): T;
    /** Removes and returns up to `count` random members from the set value store at `key`, depending on the set's length.
     * @see {@link https://valkey.io/commands/spop/|valkey.io} for details.
     *
     * @param key - The key of the set.
     * @param count - The count of the elements to pop from the set.
     *
     * Command Response - A list of popped elements will be returned depending on the set's length.
     * If `key` does not exist, empty list will be returned.
     */
    spopCount(key: GlideString, count: number): T;
    /** Returns a random element from the set value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/srandmember/|valkey.io} for more details.
     *
     * @param key - The key from which to retrieve the set member.
     * Command Response - A random element from the set, or null if `key` does not exist.
     */
    srandmember(key: GlideString): T;
    /** Returns one or more random elements from the set value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/srandmember/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param count - The number of members to return.
     *                If `count` is positive, returns unique members.
     *                If `count` is negative, allows for duplicates members.
     * Command Response - A list of members from the set. If the set does not exist or is empty, an empty list will be returned.
     */
    srandmemberCount(key: GlideString, count: number): T;
    /**
     * Returns the number of keys in `keys` that exist in the database.
     *
     * @see {@link https://valkey.io/commands/exists/|valkey.io} for details.
     *
     * @param keys - The keys list to check.
     *
     * Command Response - the number of keys that exist. If the same existing key is mentioned in `keys` multiple times,
     *     it will be counted multiple times.
     */
    exists(keys: GlideString[]): T;
    /**
     * Removes the specified keys. A key is ignored if it does not exist.
     * This command, similar to {@link del}, removes specified keys and ignores non-existent ones.
     * However, this command does not block the server, while {@link https://valkey.io/commands/del|`DEL`} does.
     *
     * @see {@link https://valkey.io/commands/unlink/|valkey.io} for details.
     *
     * @param keys - The keys we wanted to unlink.
     *
     * Command Response - The number of keys that were unlinked.
     */
    unlink(keys: GlideString[]): T;
    /**
     * Sets a timeout on `key` in seconds. After the timeout has expired, the key will automatically be deleted.
     * If `key` already has an existing expire set, the time to live is updated to the new value.
     * If `seconds` is non-positive number, the key will be deleted rather than expired.
     * The timeout will only be cleared by commands that delete or overwrite the contents of `key`.
     *
     * @see {@link https://valkey.io/commands/expire/|valkey.io} for details.
     *
     * @param key - The key to set timeout on it.
     * @param seconds - The timeout in seconds.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `expireOption`: the expire option - see {@link ExpireOptions}.
     *
     * Command Response - `true` if the timeout was set. `false` if the timeout was not set. e.g. key doesn't exist,
     *     or operation skipped due to the provided arguments.
     */
    expire(key: GlideString, seconds: number, options?: {
        expireOption?: ExpireOptions;
    }): T;
    /**
     * Sets a timeout on `key`. It takes an absolute Unix timestamp (seconds since January 1, 1970) instead of specifying the number of seconds.
     * A timestamp in the past will delete the key immediately. After the timeout has expired, the key will automatically be deleted.
     * If `key` already has an existing expire set, the time to live is updated to the new value.
     * The timeout will only be cleared by commands that delete or overwrite the contents of `key`.
     *
     * @see {@link https://valkey.io/commands/expireat/|valkey.io} for details.
     *
     * @param key - The key to set timeout on it.
     * @param unixSeconds - The timeout in an absolute Unix timestamp.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `expireOption`: the expire option - see {@link ExpireOptions}.
     *
     * Command Response - `true` if the timeout was set. `false` if the timeout was not set. e.g. key doesn't exist,
     *     or operation skipped due to the provided arguments.
     */
    expireAt(key: GlideString, unixSeconds: number, options?: {
        expireOption?: ExpireOptions;
    }): T;
    /**
     * Returns the absolute Unix timestamp (since January 1, 1970) at which the given `key` will expire, in seconds.
     * To get the expiration with millisecond precision, use {@link pexpiretime}.
     *
     * @see {@link https://valkey.io/commands/expiretime/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param key - The `key` to determine the expiration value of.
     *
     * Command Response - The expiration Unix timestamp in seconds, `-2` if `key` does not exist or `-1` if `key` exists but has no associated expire.
     */
    expireTime(key: GlideString): T;
    /**
     * Sets a timeout on `key` in milliseconds. After the timeout has expired, the key will automatically be deleted.
     * If `key` already has an existing expire set, the time to live is updated to the new value.
     * If `milliseconds` is non-positive number, the key will be deleted rather than expired.
     * The timeout will only be cleared by commands that delete or overwrite the contents of `key`.
     *
     * @see {@link https://valkey.io/commands/pexpire/|valkey.io} for details.
     *
     * @param key - The key to set timeout on it.
     * @param milliseconds - The timeout in milliseconds.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `expireOption`: the expire option - see {@link ExpireOptions}.
     *
     * Command Response - `true` if the timeout was set. `false` if the timeout was not set. e.g. key doesn't exist,
     *     or operation skipped due to the provided arguments.
     */
    pexpire(key: GlideString, milliseconds: number, options?: {
        expireOption?: ExpireOptions;
    }): T;
    /**
     * Sets a timeout on `key`. It takes an absolute Unix timestamp (milliseconds since January 1, 1970) instead of specifying the number of milliseconds.
     * A timestamp in the past will delete the key immediately. After the timeout has expired, the key will automatically be deleted.
     * If `key` already has an existing expire set, the time to live is updated to the new value.
     * The timeout will only be cleared by commands that delete or overwrite the contents of `key`.
     *
     * @see {@link https://valkey.io/commands/pexpireat/|valkey.io} for details.
     *
     * @param key - The key to set timeout on it.
     * @param unixMilliseconds - The timeout in an absolute Unix timestamp.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `expireOption`: the expire option - see {@link ExpireOptions}.
     *
     * Command Response - `true` if the timeout was set. `false` if the timeout was not set. e.g. key doesn't exist,
     *     or operation skipped due to the provided arguments.
     */
    pexpireAt(key: GlideString, unixMilliseconds: number, options?: {
        expireOption?: ExpireOptions;
    }): T;
    /**
     * Returns the absolute Unix timestamp (since January 1, 1970) at which the given `key` will expire, in milliseconds.
     *
     * @see {@link https://valkey.io/commands/pexpiretime/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param key - The `key` to determine the expiration value of.
     *
     * Command Response - The expiration Unix timestamp in seconds, `-2` if `key` does not exist or `-1` if `key` exists but has no associated expire.
     */
    pexpireTime(key: GlideString): T;
    /**
     * Returns the remaining time to live of `key` that has a timeout.
     *
     * @see {@link https://valkey.io/commands/ttl/|valkey.io} for details.
     *
     * @param key - The key to return its timeout.
     *
     * Command Response - TTL in seconds, `-2` if `key` does not exist or `-1` if `key` exists but has no associated expire.
     */
    ttl(key: GlideString): T;
    /**
     * Adds members with their scores to the sorted set stored at `key`.
     * If a member is already a part of the sorted set, its score is updated.
     *
     * @see {@link https://valkey.io/commands/zadd/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param membersAndScores - A list of members and their corresponding scores or a mapping of members to their corresponding scores.
     * @param options - (Optional) The `ZADD` options - see {@link ZAddOptions}.
     *
     * Command Response - The number of elements added to the sorted set.
     * If {@link ZAddOptions.changed} is set to `true`, returns the number of elements updated in the sorted set.
     */
    zadd(key: GlideString, membersAndScores: ElementAndScore[] | Record<string, Score>, options?: ZAddOptions): T;
    /**
     * Increments the score of member in the sorted set stored at `key` by `increment`.
     * If `member` does not exist in the sorted set, it is added with `increment` as its score (as if its previous score was 0.0).
     * If `key` does not exist, a new sorted set with the specified member as its sole member is created.
     *
     * @see {@link https://valkey.io/commands/zadd/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param member - A member in the sorted set to increment.
     * @param increment - The score to increment the member.
     * @param options - (Optional) The `ZADD` options - see {@link ZAddOptions}.
     *
     * Command Response - The score of the member.
     * If there was a conflict with the options, the operation aborts and `null` is returned.
     */
    zaddIncr(key: GlideString, member: GlideString, increment: number, options?: ZAddOptions): T;
    /**
     * Removes the specified members from the sorted set stored at `key`.
     * Specified members that are not a member of this set are ignored.
     *
     * @see {@link https://valkey.io/commands/zrem/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param members - A list of members to remove from the sorted set.
     *
     * Command Response - The number of members that were removed from the sorted set, not including non-existing members.
     * If `key` does not exist, it is treated as an empty sorted set, and this command returns 0.
     */
    zrem(key: GlideString, members: GlideString[]): T;
    /**
     * Returns the cardinality (number of elements) of the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zcard/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     *
     * Command Response - The number of elements in the sorted set.
     * If `key` does not exist, it is treated as an empty sorted set, and this command returns `0`.
     */
    zcard(key: GlideString): T;
    /**
     * Returns the cardinality of the intersection of the sorted sets specified by `keys`.
     *
     * @see {@link https://valkey.io/commands/zintercard/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - The keys of the sorted sets to intersect.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `limit`: the limit for the intersection cardinality value. If not specified, or set to `0`, no limit is used.
     *
     * Command Response - The cardinality of the intersection of the given sorted sets.
     */
    zintercard(keys: GlideString[], options?: {
        limit?: number;
    }): T;
    /**
     * Returns the difference between the first sorted set and all the successive sorted sets.
     * To get the elements with their scores, see {@link zdiffWithScores}.
     *
     * @see {@link https://valkey.io/commands/zdiff/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param keys - The keys of the sorted sets.
     *
     * Command Response - An `array` of elements representing the difference between the sorted sets.
     * If the first key does not exist, it is treated as an empty sorted set, and the command returns an empty `array`.
     */
    zdiff(keys: GlideString[]): T;
    /**
     * Returns the difference between the first sorted set and all the successive sorted sets, with the associated
     * scores.
     *
     * @see {@link https://valkey.io/commands/zdiff/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param keys - The keys of the sorted sets.
     *
     * Command Response - A list of elements and their scores representing the difference between the sorted sets.
     *     If the first key does not exist, it is treated as an empty sorted set, and the command returns an empty `array`.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zdiffWithScores(keys: GlideString[]): T;
    /**
     * Calculates the difference between the first sorted set and all the successive sorted sets in `keys` and stores
     * the difference as a sorted set to `destination`, overwriting it if it already exists. Non-existent keys are
     * treated as empty sets.
     *
     * @see {@link https://valkey.io/commands/zdiffstore/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param destination - The key for the resulting sorted set.
     * @param keys - The keys of the sorted sets to compare.
     *
     * Command Response - The number of members in the resulting sorted set stored at `destination`.
     */
    zdiffstore(destination: GlideString, keys: GlideString[]): T;
    /**
     * Returns the score of `member` in the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zscore/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param member - The member whose score is to be retrieved.
     *
     * Command Response - The score of the member.
     * If `member` does not exist in the sorted set, null is returned.
     * If `key` does not exist, null is returned.
     */
    zscore(key: GlideString, member: GlideString): T;
    /**
     * Computes the union of sorted sets given by the specified `keys` and stores the result in `destination`.
     * If `destination` already exists, it is overwritten. Otherwise, a new sorted set will be created.
     * To get the result directly, see {@link zunionWithScores}.
     *
     * @see {@link https://valkey.io/commands/zunionstore/|valkey.io} for details.
     * @param destination - The key of the destination sorted set.
     * @param keys - The keys of the sorted sets with possible formats:
     *  - `GlideString[]` - for keys only.
     *  - `KeyWeight[]` - for weighted keys with their score multipliers.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `aggregationType`: the aggregation strategy to apply when combining the scores of elements. See {@link AggregationType}.
     *   If `aggregationType` is not specified, defaults to `AggregationType.SUM`.
     *
     * Command Response - The number of elements in the resulting sorted set stored at `destination`.
     */
    zunionstore(destination: GlideString, keys: GlideString[] | KeyWeight[], options?: {
        aggregationType?: AggregationType;
    }): T;
    /**
     * Returns the scores associated with the specified `members` in the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zmscore/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the sorted set.
     * @param members - A list of members in the sorted set.
     *
     * Command Response - An `array` of scores corresponding to `members`.
     * If a member does not exist in the sorted set, the corresponding value in the list will be `null`.
     */
    zmscore(key: GlideString, members: GlideString[]): T;
    /**
     * Returns the number of members in the sorted set stored at `key` with scores between `minScore` and `maxScore`.
     *
     * @see {@link https://valkey.io/commands/zcount/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param minScore - The minimum score to count from. Can be positive/negative infinity, or specific score and inclusivity.
     * @param maxScore - The maximum score to count up to. Can be positive/negative infinity, or specific score and inclusivity.
     *
     * Command Response - The number of members in the specified score range.
     * If `key` does not exist, it is treated as an empty sorted set, and the command returns `0`.
     * If `minScore` is greater than `maxScore`, `0` is returned.
     */
    zcount(key: GlideString, minScore: Boundary<number>, maxScore: Boundary<number>): T;
    /**
     * Returns the specified range of elements in the sorted set stored at `key`.
     * `ZRANGE` can perform different types of range queries: by index (rank), by the score, or by lexicographical order.
     *
     * To get the elements with their scores, see {@link zrangeWithScores}.
     *
     * @see {@link https://valkey.io/commands/zrange/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param rangeQuery - The range query object representing the type of range query to perform.
     * - For range queries by index (rank), use {@link RangeByIndex}.
     * - For range queries by lexicographical order, use {@link RangeByLex}.
     * - For range queries by score, use {@link RangeByScore}.
     * @param reverse - If `true`, reverses the sorted set, with index `0` as the element with the highest score.
     *
     * Command Response - A list of elements within the specified range.
     * If `key` does not exist, it is treated as an empty sorted set, and the command returns an empty array.
     */
    zrange(key: GlideString, rangeQuery: RangeByScore | RangeByLex | RangeByIndex, reverse?: boolean): T;
    /**
     * Returns the specified range of elements with their scores in the sorted set stored at `key`.
     * Similar to {@link ZRange} but with a `WITHSCORE` flag.
     *
     * @see {@link https://valkey.io/commands/zrange/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param rangeQuery - The range query object representing the type of range query to perform.
     * - For range queries by index (rank), use {@link RangeByIndex}.
     * - For range queries by score, use {@link RangeByScore}.
     * @param reverse - If `true`, reverses the sorted set, with index `0` as the element with the highest score.
     *
     * Command Response - A list of elements and their scores within the specified range.
     *     If `key` does not exist, it is treated as an empty sorted set, and the command returns an empty list.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zrangeWithScores(key: GlideString, rangeQuery: RangeByScore | RangeByIndex, reverse?: boolean): T;
    /**
     * Stores a specified range of elements from the sorted set at `source`, into a new
     * sorted set at `destination`. If `destination` doesn't exist, a new sorted
     * set is created; if it exists, it's overwritten.
     *
     * @see {@link https://valkey.io/commands/zrangestore/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param destination - The key for the destination sorted set.
     * @param source - The key of the source sorted set.
     * @param rangeQuery - The range query object representing the type of range query to perform.
     * - For range queries by index (rank), use {@link RangeByIndex}.
     * - For range queries by lexicographical order, use {@link RangeByLex}.
     * - For range queries by score, use {@link RangeByScore}.
     * @param reverse - If `true`, reverses the sorted set, with index `0` as the element with the highest score.
     *
     * Command Response - The number of elements in the resulting sorted set.
     */
    zrangeStore(destination: GlideString, source: GlideString, rangeQuery: RangeByScore | RangeByLex | RangeByIndex, reverse?: boolean): T;
    /**
     * Computes the intersection of sorted sets given by the specified `keys` and stores the result in `destination`.
     * If `destination` already exists, it is overwritten. Otherwise, a new sorted set will be created.
     *
     * @see {@link https://valkey.io/commands/zinterstore/|valkey.io} for details.
     *
     * @remarks Since Valkey version 6.2.0.
     *
     * @param destination - The key of the destination sorted set.
     * @param keys - The keys of the sorted sets with possible formats:
     *  - `GlideString[]` - for keys only.
     *  - `KeyWeight[]` - for weighted keys with score multipliers.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `aggregationType`: the aggregation strategy to apply when combining the scores of elements. See {@link AggregationType}.
     *   If `aggregationType` is not specified, defaults to `AggregationType.SUM`.
     *
     * Command Response - The number of elements in the resulting sorted set stored at `destination`.
     */
    zinterstore(destination: GlideString, keys: GlideString[] | KeyWeight[], options?: {
        aggregationType?: AggregationType;
    }): T;
    /**
     * Computes the intersection of sorted sets given by the specified `keys` and returns a list of intersecting elements.
     * To get the scores as well, see {@link zinterWithScores}.
     * To store the result in a key as a sorted set, see {@link zinterStore}.
     *
     * @remarks Since Valkey version 6.2.0.
     *
     * @see {@link https://valkey.io/commands/zinter/|valkey.io} for details.
     *
     * @param keys - The keys of the sorted sets.
     *
     * Command Response - The resulting array of intersecting elements.
     */
    zinter(keys: GlideString[]): T;
    /**
     * Computes the intersection of sorted sets given by the specified `keys` and returns a list of intersecting elements with scores.
     * To get the elements only, see {@link zinter}.
     * To store the result in a key as a sorted set, see {@link zinterStore}.
     *
     * @see {@link https://valkey.io/commands/zinter/|valkey.io} for details.
     *
     * @remarks Since Valkey version 6.2.0.
     *
     * @param keys - The keys of the sorted sets with possible formats:
     *  - `GlideString[]` - for keys only.
     *  - `KeyWeight[]` - for weighted keys with score multipliers.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `aggregationType`: the aggregation strategy to apply when combining the scores of elements. See {@link AggregationType}.
     *   If `aggregationType` is not specified, defaults to `AggregationType.SUM`.
     *
     * Command Response - A list of elements and their scores representing the intersection of the sorted sets.
     *     If a key does not exist, it is treated as an empty sorted set, and the command returns an empty result.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zinterWithScores(keys: GlideString[] | KeyWeight[], options?: {
        aggregationType?: AggregationType;
    }): T;
    /**
     * Computes the union of sorted sets given by the specified `keys` and returns a list of union elements.
     *
     * To get the scores as well, see {@link zunionWithScores}.
     * To store the result in a key as a sorted set, see {@link zunionstore}.
     *
     * @see {@link https://valkey.io/commands/zunion/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param keys - The keys of the sorted sets.
     *
     * Command Response - The resulting array with a union of sorted set elements.
     */
    zunion(keys: GlideString[]): T;
    /**
     * Computes the intersection of sorted sets given by the specified `keys` and returns a list of union elements with scores.
     * To get the elements only, see {@link zunion}.
     *
     * @see {@link https://valkey.io/commands/zunion/|valkey.io} for details.
     *
     * @remarks Since Valkey version 6.2.0.
     *
     * @param keys - The keys of the sorted sets with possible formats:
     *  - `GlideString[]` - for keys only.
     *  - `KeyWeight[]` - for weighted keys with their score multipliers.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `aggregationType`: the aggregation strategy to apply when combining the scores of elements. See {@link AggregationType}.
     *   If `aggregationType` is not specified, defaults to `AggregationType.SUM`.
     *
     * Command Response - A list of elements and their scores representing the intersection of the sorted sets.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zunionWithScores(keys: GlideString[] | KeyWeight[], options?: {
        aggregationType?: AggregationType;
    }): T;
    /**
     * Returns a random member from the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zrandmember/|valkey.io} for details.
     *
     * @param keys - The key of the sorted set.
     *
     * Command Response - A string representing a random member from the sorted set.
     *     If the sorted set does not exist or is empty, the response will be `null`.
     */
    zrandmember(key: GlideString): T;
    /**
     * Returns random members from the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zrandmember/|valkey.io} for details.
     *
     * @param keys - The key of the sorted set.
     * @param count - The number of members to return.
     *     If `count` is positive, returns unique members.
     *     If negative, allows for duplicates.
     *
     * Command Response - An `array` of members from the sorted set.
     *     If the sorted set does not exist or is empty, the response will be an empty `array`.
     */
    zrandmemberWithCount(key: GlideString, count: number): T;
    /**
     * Returns random members with scores from the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/zrandmember/|valkey.io} for details.
     *
     * @param keys - The key of the sorted set.
     * @param count - The number of members to return.
     *     If `count` is positive, returns unique members.
     *     If negative, allows for duplicates.
     *
     * Command Response - A list of {@link KeyWeight} tuples, which store member names and their respective scores.
     *     If the sorted set does not exist or is empty, the response will be an empty `array`.
     */
    zrandmemberWithCountWithScores(key: GlideString, count: number): T;
    /**
     * Returns the string representation of the type of the value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/type/|valkey.io} for details.
     *
     * @param key - The key to check its data type.
     *
     * Command Response - If the key exists, the type of the stored value is returned. Otherwise, a "none" string is returned.
     */
    type(key: GlideString): T;
    /**
     * Returns the length of the string value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/strlen/|valkey.io} for details.
     *
     * @param key - The `key` to check its length.
     *
     * Command Response - The length of the string value stored at `key`
     * If `key` does not exist, it is treated as an empty string, and the command returns `0`.
     */
    strlen(key: GlideString): T;
    /**
     * Removes and returns the members with the lowest scores from the sorted set stored at `key`.
     * If `count` is provided, up to `count` members with the lowest scores are removed and returned.
     * Otherwise, only one member with the lowest score is removed and returned.
     *
     * @see {@link https://valkey.io/commands/zpopmin/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param count - Specifies the quantity of members to pop. If not specified, pops one member.
     *
     * Command Response - A list of the removed members and their scores, ordered from the one with the lowest score to the one with the highest.
     *     If `key` doesn't exist, it will be treated as an empty sorted set and the command returns an empty map.
     *     If `count` is higher than the sorted set's cardinality, returns all members and their scores.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zpopmin(key: GlideString, count?: number): T;
    /**
     * Blocks the connection until it removes and returns a member with the lowest score from the
     * first non-empty sorted set, with the given `key` being checked in the order they
     * are provided.
     * `BZPOPMIN` is the blocking variant of {@link zpopmin}.
     *
     * @see {@link https://valkey.io/commands/bzpopmin/|valkey.io} for details.
     *
     * @param keys - The keys of the sorted sets.
     * @param timeout - The number of seconds to wait for a blocking operation to complete. A value of
     *     `0` will block indefinitely. Since Valkey version 6.0.0: timeout is interpreted as a double instead of an integer.
     *
     * Command Response - An `array` containing the key where the member was popped out, the member, itself, and the member score.
     *     If no member could be popped and the `timeout` expired, returns `null`.
     */
    bzpopmin(keys: GlideString[], timeout: number): T;
    /**
     * Removes and returns the members with the highest scores from the sorted set stored at `key`.
     * If `count` is provided, up to `count` members with the highest scores are removed and returned.
     * Otherwise, only one member with the highest score is removed and returned.
     *
     * @see {@link https://valkey.io/commands/zpopmax/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param count - Specifies the quantity of members to pop. If not specified, pops one member.
     *
     * Command Response - A list of the removed members and their scores, ordered from the one with the lowest score to the one with the highest.
     *     If `key` doesn't exist, it will be treated as an empty sorted set and the command returns an empty map.
     *     If `count` is higher than the sorted set's cardinality, returns all members and their scores.
     *     The response comes in format `GlideRecord<number>`, see {@link GlideRecord}.
     */
    zpopmax(key: GlideString, count?: number): T;
    /**
     * Blocks the connection until it removes and returns a member with the highest score from the
     * first non-empty sorted set, with the given `key` being checked in the order they
     * are provided.
     * `BZPOPMAX` is the blocking variant of {@link zpopmax}.
     *
     * @see {@link https://valkey.io/commands/bzpopmax/|valkey.io} for details.
     *
     * @param keys - The keys of the sorted sets.
     * @param timeout - The number of seconds to wait for a blocking operation to complete. A value of
     *     `0` will block indefinitely. Since 6.0.0: timeout is interpreted as a double instead of an integer.
     *
     * Command Response - An `array` containing the key where the member was popped out, the member, itself, and the member score.
     *     If no member could be popped and the `timeout` expired, returns `null`.
     */
    bzpopmax(keys: GlideString[], timeout: number): T;
    /**
     * Echoes the provided `message` back
     *
     * @see {@link https://valkey.io/commands/echo/|valkey.io} for more details.
     *
     * @param message - The message to be echoed back.
     *
     * Command Response - The provided `message`.
     */
    echo(message: GlideString): T;
    /**
     * Returns the remaining time to live of `key` that has a timeout, in milliseconds.
     *
     * @see {@link https://valkey.io/commands/pttl/|valkey.io} for more details.
     *
     * @param key - The key to return its timeout.
     *
     * Command Response - TTL in milliseconds, `-2` if `key` does not exist, `-1` if `key` exists but has no associated expire.
     */
    pttl(key: GlideString): T;
    /**
     * Removes all elements in the sorted set stored at `key` with rank between `start` and `end`.
     * Both `start` and `end` are zero-based indexes with 0 being the element with the lowest score.
     * These indexes can be negative numbers, where they indicate offsets starting at the element with the highest score.
     *
     * @see {@link https://valkey.io/commands/zremrangebyrank/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param start - The starting point of the range.
     * @param end - The end of the range.
     *
     * Command Response - The number of members removed.
     * If `start` exceeds the end of the sorted set, or if `start` is greater than `end`, 0 returned.
     * If `end` exceeds the actual end of the sorted set, the range will stop at the actual end of the sorted set.
     * If `key` does not exist 0 will be returned.
     */
    zremRangeByRank(key: GlideString, start: number, end: number): T;
    /**
     * Removes all elements in the sorted set stored at `key` with lexicographical order between `minLex` and `maxLex`.
     *
     * @see {@link https://valkey.io/commands/zremrangebylex/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param minLex - The minimum lex to count from. Can be negative infinity, or a specific lex and inclusivity.
     * @param maxLex - The maximum lex to count up to. Can be positive infinity, or a specific lex and inclusivity.
     *
     * Command Response - The number of members removed.
     * If `key` does not exist, it is treated as an empty sorted set, and the command returns 0.
     * If `minLex` is greater than `maxLex`, 0 is returned.
     */
    zremRangeByLex(key: GlideString, minLex: Boundary<GlideString>, maxLex: Boundary<GlideString>): T;
    /**
     * Removes all elements in the sorted set stored at `key` with a score between `minScore` and `maxScore`.
     *
     * @see {@link https://valkey.io/commands/zremrangebyscore/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param minScore - The minimum score to remove from. Can be negative infinity, or specific score and inclusivity.
     * @param maxScore - The maximum score to remove to. Can be positive infinity, or specific score and inclusivity.
     *
     * Command Response - the number of members removed.
     * If `key` does not exist, it is treated as an empty sorted set, and the command returns 0.
     * If `minScore` is greater than `maxScore`, 0 is returned.
     */
    zremRangeByScore(key: GlideString, minScore: Boundary<number>, maxScore: Boundary<number>): T;
    /**
     * Returns the number of members in the sorted set stored at 'key' with scores between 'minLex' and 'maxLex'.
     *
     * @see {@link https://valkey.io/commands/zlexcount/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param minLex - The minimum lex to count from. Can be negative infinity, or a specific lex and inclusivity.
     * @param maxLex - The maximum lex to count up to. Can be positive infinity, or a specific lex and inclusivity.
     *
     * Command Response - The number of members in the specified lex range.
     * If 'key' does not exist, it is treated as an empty sorted set, and the command returns '0'.
     * If maxLex is less than minLex, '0' is returned.
     */
    zlexcount(key: GlideString, minLex: Boundary<GlideString>, maxLex: Boundary<GlideString>): T;
    /**
     * Returns the rank of `member` in the sorted set stored at `key`, with scores ordered from low to high.
     * To get the rank of `member` with its score, see {@link zrankWithScore}.
     *
     * @see {@link https://valkey.io/commands/zrank/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param member - The member whose rank is to be retrieved.
     *
     * Command Response - The rank of `member` in the sorted set.
     * If `key` doesn't exist, or if `member` is not present in the set, null will be returned.
     */
    zrank(key: GlideString, member: GlideString): T;
    /**
     * Returns the rank of `member` in the sorted set stored at `key` with its score, where scores are ordered from the lowest to highest.
     *
     * @see {@link https://valkey.io/commands/zrank/|valkey.io} for more details.
     * @remarks Since Valkey version 7.2.0.
     *
     * @param key - The key of the sorted set.
     * @param member - The member whose rank is to be retrieved.
     *
     * Command Response - A list containing the rank and score of `member` in the sorted set.
     * If `key` doesn't exist, or if `member` is not present in the set, null will be returned.
     */
    zrankWithScore(key: GlideString, member: GlideString): T;
    /**
     * Returns the rank of `member` in the sorted set stored at `key`, where
     * scores are ordered from the highest to lowest, starting from `0`.
     * To get the rank of `member` with its score, see {@link zrevrankWithScore}.
     *
     * @see {@link https://valkey.io/commands/zrevrank/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param member - The member whose rank is to be retrieved.
     *
     * Command Response - The rank of `member` in the sorted set, where ranks are ordered from high to low based on scores.
     *     If `key` doesn't exist, or if `member` is not present in the set, `null` will be returned.
     */
    zrevrank(key: GlideString, member: GlideString): T;
    /**
     * Returns the rank of `member` in the sorted set stored at `key` with its
     * score, where scores are ordered from the highest to lowest, starting from `0`.
     *
     * @see {@link https://valkey.io/commands/zrevrank/|valkey.io} for details.
     * @remarks Since Valkey version 7.2.0.
     *
     * @param key - The key of the sorted set.
     * @param member - The member whose rank is to be retrieved.
     *
     * Command Response -  A list containing the rank and score of `member` in the sorted set, where ranks
     *     are ordered from high to low based on scores.
     *     If `key` doesn't exist, or if `member` is not present in the set, `null` will be returned.
     */
    zrevrankWithScore(key: GlideString, member: GlideString): T;
    /**
     * Removes the existing timeout on `key`, turning the key from volatile (a key with an expire set) to
     * persistent (a key that will never expire as no timeout is associated).
     *
     * @see {@link https://valkey.io/commands/persist/|valkey.io} for details.
     *
     * @param key - The key to remove the existing timeout on.
     *
     * Command Response - `false` if `key` does not exist or does not have an associated timeout, `true` if the timeout has been removed.
     */
    persist(key: GlideString): T;
    /** Executes a single command, without checking inputs. Every part of the command, including subcommands,
     *  should be added as a separate value in args.
     *
     * @see {@link https://github.com/valkey-io/valkey-glide/wiki/General-Concepts#custom-command|Valkey Glide Wiki} for details on the restrictions and limitations of the custom command API.
     *
     * Command Response - A response from Valkey with an `Object`.
     */
    customCommand(args: GlideString[]): T;
    /** Returns the element at index `index` in the list stored at `key`.
     * The index is zero-based, so 0 means the first element, 1 the second element and so on.
     * Negative indices can be used to designate elements starting at the tail of the list.
     * Here, -1 means the last element, -2 means the penultimate and so forth.
     * @see {@link https://valkey.io/commands/lindex/|valkey.io} for details.
     *
     * @param key - The `key` of the list.
     * @param index - The `index` of the element in the list to retrieve.
     * Command Response - The element at index in the list stored at `key`.
     * If `index` is out of range or if `key` does not exist, null is returned.
     */
    lindex(key: GlideString, index: number): T;
    /**
     * Inserts `element` in the list at `key` either before or after the `pivot`.
     *
     * @see {@link https://valkey.io/commands/linsert/|valkey.io} for details.
     *
     * @param key - The key of the list.
     * @param position - The relative position to insert into - either `InsertPosition.Before` or
     *     `InsertPosition.After` the `pivot`.
     * @param pivot - An element of the list.
     * @param element - The new element to insert.
     *
     * Command Response - The list length after a successful insert operation.
     * If the `key` doesn't exist returns `-1`.
     * If the `pivot` wasn't found, returns `0`.
     */
    linsert(key: GlideString, position: InsertPosition, pivot: GlideString, element: GlideString): T;
    /**
     * Adds an entry to the specified stream stored at `key`. If the `key` doesn't exist, the stream is created.
     * @see {@link https://valkey.io/commands/xadd/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param values - field-value pairs to be added to the entry.
     * @param options - (Optional) Stream add options.
     *
     * Command Response - The id of the added entry, or `null` if `options.makeStream` is set to `false` and no stream with the matching `key` exists.
     */
    xadd(key: GlideString, values: [GlideString, GlideString][], options?: StreamAddOptions): T;
    /**
     * Removes the specified entries by id from a stream, and returns the number of entries deleted.
     *
     * @see {@link https://valkey.io/commands/xdel/|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param ids - An array of entry ids.
     *
     * Command Response - The number of entries removed from the stream. This number may be less than the number of entries in
     *      `ids`, if the specified `ids` don't exist in the stream.
     */
    xdel(key: GlideString, ids: string[]): T;
    /**
     * Trims the stream stored at `key` by evicting older entries.
     * @see {@link https://valkey.io/commands/xtrim/|valkey.io} for details.
     *
     * @param key - the key of the stream
     * @param options - options detailing how to trim the stream.
     *
     * Command Response - The number of entries deleted from the stream. If `key` doesn't exist, 0 is returned.
     */
    xtrim(key: GlideString, options: StreamTrimOptions): T;
    /**
     * Returns information about the stream stored at `key`.
     *
     * @param key - The key of the stream.
     * @param fullOptions - If `true`, returns verbose information with a limit of the first 10 PEL entries.
     * If `number` is specified, returns verbose information limiting the returned PEL entries.
     * If `0` is specified, returns verbose information with no limit.
     *
     * Command Response - Detailed stream information for the given `key`.
     *     See example of {@link BaseClient.xinfoStream} for more details.
     *     The response comes in format `GlideRecord<StreamEntries | GlideRecord<StreamEntries | GlideRecord<StreamEntries>[]>[]>`, see {@link GlideRecord}.
     */
    xinfoStream(key: GlideString, fullOptions?: boolean | number): T;
    /**
     * Returns the list of all consumer groups and their attributes for the stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xinfo-groups/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     *
     * Command Response -  An `Array` of `Records`, where each mapping represents the
     *     attributes of a consumer group for the stream at `key`.
     *     The response comes in format `GlideRecord<GlideString | number | null>[]`, see {@link GlideRecord}.
     */
    xinfoGroups(key: GlideString): T;
    /**
     * Returns the server time.
     *
     * @see {@link https://valkey.io/commands/time/|valkey.io} for details.
     *
     * Command Response - The current server time as an `array` with two items:
     * - A Unix timestamp,
     * - The amount of microseconds already elapsed in the current second.
     */
    time(): T;
    /**
     * Returns stream entries matching a given range of entry IDs.
     *
     * @see {@link https://valkey.io/commands/xrange/|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param start - The starting stream entry ID bound for the range.
     *     - Use `value` to specify a stream entry ID.
     *     - Use `isInclusive: false` to specify an exclusive bounded stream entry ID. This is only available starting with Valkey version 6.2.0.
     *     - Use `InfBoundary.NegativeInfinity` to start with the minimum available ID.
     * @param end - The ending stream ID bound for the range.
     *     - Use `value` to specify a stream entry ID.
     *     - Use `isInclusive: false` to specify an exclusive bounded stream entry ID. This is only available starting with Valkey version 6.2.0.
     *     - Use `InfBoundary.PositiveInfinity` to end with the maximum available ID.
     * @param count - An optional argument specifying the maximum count of stream entries to return.
     *     If `count` is not provided, all stream entries in the range will be returned.
     *
     * Command Response - A list of stream entry ids, to an array of entries, or `null` if `count` is non-positive.
     *     The response comes in format `GlideRecord<[GlideString, GlideString][]> | null`, see {@link GlideRecord}.
     */
    xrange(key: GlideString, start: Boundary<string>, end: Boundary<string>, count?: number): T;
    /**
     * Returns stream entries matching a given range of entry IDs in reverse order. Equivalent to {@link xrange} but returns the
     * entries in reverse order.
     *
     * @see {@link https://valkey.io/commands/xrevrange/|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param end - The ending stream entry ID bound for the range.
     *     - Use `value` to specify a stream entry ID.
     *     - Use `isInclusive: false` to specify an exclusive bounded stream entry ID. This is only available starting with Valkey version 6.2.0.
     *     - Use `InfBoundary.PositiveInfinity` to end with the maximum available ID.
     * @param start - The ending stream ID bound for the range.
     *     - Use `value` to specify a stream entry ID.
     *     - Use `isInclusive: false` to specify an exclusive bounded stream entry ID. This is only available starting with Valkey version 6.2.0.
     *     - Use `InfBoundary.NegativeInfinity` to start with the minimum available ID.
     * @param count - An optional argument specifying the maximum count of stream entries to return.
     *     If `count` is not provided, all stream entries in the range will be returned.
     *
     * Command Response - A list of stream entry ids, to an array of entries, or `null` if `count` is non-positive.
     *     The response comes in format `GlideRecord<[GlideString, GlideString][]> | null`, see {@link GlideRecord}.
     */
    xrevrange(key: GlideString, end: Boundary<string>, start: Boundary<string>, count?: number): T;
    /**
     * Reads entries from the given streams.
     *
     * @see {@link https://valkey.io/commands/xread/|valkey.io} for details.
     *
     * @param keys_and_ids - An object of stream keys and entry IDs to read from.
     * @param options - (Optional) Parameters detailing how to read the stream - see {@link StreamReadOptions}.
     *
     * Command Response - A list of stream keys with a `Record` of stream IDs mapped to an `Array` of entries or `null` if key does not exist.
     *     The response comes in format `GlideRecord<GlideRecord<[GlideString, GlideString][]>>`, see {@link GlideRecord}.
     */
    xread(keys_and_ids: Record<string, string> | GlideRecord<string>, options?: StreamReadOptions): T;
    /**
     * Reads entries from the given streams owned by a consumer group.
     *
     * @see {@link https://valkey.io/commands/xreadgroup/|valkey.io} for details.
     *
     * @param group - The consumer group name.
     * @param consumer - The group consumer.
     * @param keys_and_ids - An object of stream keys and entry IDs to read from.
     *     Use the special ID of `">"` to receive only new messages.
     * @param options - (Optional) Parameters detailing how to read the stream - see {@link StreamReadGroupOptions}.
     *
     * Command Response - A list of stream keys with a `Record` of stream IDs mapped to an `Array` of entries.
     *     Returns `null` if there is no stream that can be served.
     *     The response comes in format `GlideRecord<GlideRecord<[GlideString, GlideString][]>>`, see {@link GlideRecord}.
     */
    xreadgroup(group: GlideString, consumer: GlideString, keys_and_ids: Record<string, string> | GlideRecord<string>, options?: StreamReadGroupOptions): T;
    /**
     * Returns the number of entries in the stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xlen/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     *
     * Command Response - The number of entries in the stream. If `key` does not exist, returns `0`.
     */
    xlen(key: GlideString): T;
    /**
     * Returns stream message summary information for pending messages matching a given range of IDs.
     *
     * @see {@link https://valkey.io/commands/xpending/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     *
     * Command Response - An `array` that includes the summary of the pending messages.
     *     See example of {@link BaseClient.xpending|xpending} for more details.
     */
    xpending(key: GlideString, group: GlideString): T;
    /**
     * Returns stream message summary information for pending messages matching a given range of IDs.
     *
     * @see {@link https://valkey.io/commands/xpending/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param options - Additional options to filter entries, see {@link StreamPendingOptions}.
     *
     * Command Response - A 2D-`array` of 4-tuples containing extended message information.
     * See example of {@link BaseClient.xpendingWithOptions|xpendingWithOptions} for more details.
     */
    xpendingWithOptions(key: GlideString, group: GlideString, options: StreamPendingOptions): T;
    /**
     * Returns the list of all consumers and their attributes for the given consumer group of the
     * stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xinfo-consumers/|valkey.io} for details.
     *
     * Command Response - An `Array` of `Records`, where each mapping contains the attributes
     *     of a consumer for the given consumer group of the stream at `key`.
     *     The response comes in format `GlideRecord<GlideString | number>[]`, see {@link GlideRecord}.
     */
    xinfoConsumers(key: GlideString, group: GlideString): T;
    /**
     * Changes the ownership of a pending message.
     *
     * @see {@link https://valkey.io/commands/xclaim/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param consumer - The group consumer.
     * @param minIdleTime - The minimum idle time for the message to be claimed.
     * @param ids - An array of entry ids.
     * @param options - (Optional) Stream claim options {@link StreamClaimOptions}.
     *
     * Command Response - Message entries that are claimed by the consumer.
     *     The response comes in format `GlideRecord<[GlideString, GlideString][]>`, see {@link GlideRecord}.
     */
    xclaim(key: GlideString, group: GlideString, consumer: GlideString, minIdleTime: number, ids: string[], options?: StreamClaimOptions): T;
    /**
     * Changes the ownership of a pending message. This function returns an `array` with
     * only the message/entry IDs, and is equivalent to using `JUSTID` in the Valkey API.
     *
     * @see {@link https://valkey.io/commands/xclaim/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param consumer - The group consumer.
     * @param minIdleTime - The minimum idle time for the message to be claimed.
     * @param ids - An array of entry ids.
     * @param options - (Optional) Stream claim options {@link StreamClaimOptions}.
     *
     * Command Response - An `array` of message ids claimed by the consumer.
     */
    xclaimJustId(key: GlideString, group: GlideString, consumer: GlideString, minIdleTime: number, ids: string[], options?: StreamClaimOptions): T;
    /**
     * Transfers ownership of pending stream entries that match the specified criteria.
     *
     * @see {@link https://valkey.io/commands/xautoclaim/|valkey.io} for more details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param consumer - The group consumer.
     * @param minIdleTime - The minimum idle time for the message to be claimed.
     * @param start - Filters the claimed entries to those that have an ID equal or greater than the
     *     specified value.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `count`: the number of claimed entries.
     *
     * Command Response - An `array` containing the following elements:
     *   - A stream ID to be used as the start argument for the next call to `XAUTOCLAIM`. This ID is
     *     equivalent to the next ID in the stream after the entries that were scanned, or "0-0" if
     *     the entire stream was scanned.
     *   - A mapping of the claimed entries.
     *   - If you are using Valkey 7.0.0 or above, the response list will also include a list containing
     *     the message IDs that were in the Pending Entries List but no longer exist in the stream.
     *     These IDs are deleted from the Pending Entries List.
     *
     *     The response comes in format `[GlideString, GlideRecord<[GlideString, GlideString][]>, GlideString[]?]`, see {@link GlideRecord}.
     */
    xautoclaim(key: GlideString, group: GlideString, consumer: GlideString, minIdleTime: number, start: string, options?: {
        count?: number;
    }): T;
    /**
     * Transfers ownership of pending stream entries that match the specified criteria.
     *
     * @see {@link https://valkey.io/commands/xautoclaim/|valkey.io} for more details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param consumer - The group consumer.
     * @param minIdleTime - The minimum idle time for the message to be claimed.
     * @param start - Filters the claimed entries to those that have an ID equal or greater than the
     *     specified value.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `count`: limits the number of claimed entries to the specified value.
     *
     * Command Response - An `array` containing the following elements:
     *   - A stream ID to be used as the start argument for the next call to `XAUTOCLAIM`. This ID is
     *     equivalent to the next ID in the stream after the entries that were scanned, or "0-0" if
     *     the entire stream was scanned.
     *   - A list of the IDs for the claimed entries.
     *   - If you are using Valkey 7.0.0 or above, the response list will also include a list containing
     *     the message IDs that were in the Pending Entries List but no longer exist in the stream.
     *     These IDs are deleted from the Pending Entries List.
     */
    xautoclaimJustId(key: GlideString, group: GlideString, consumer: GlideString, minIdleTime: number, start: string, options?: {
        count?: number;
    }): T;
    /**
     * Creates a new consumer group uniquely identified by `groupname` for the stream
     * stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xgroup-create/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param groupName - The newly created consumer group name.
     * @param id - Stream entry ID that specifies the last delivered entry in the stream from the new
     *     group’s perspective. The special ID `"$"` can be used to specify the last entry in the stream.
     *
     * Command Response - `"OK"`.
     */
    xgroupCreate(key: GlideString, groupName: GlideString, id: string, options?: StreamGroupOptions): T;
    /**
     * Destroys the consumer group `groupname` for the stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xgroup-destroy/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param groupname - The newly created consumer group name.
     *
     * Command Response - `true` if the consumer group is destroyed. Otherwise, `false`.
     */
    xgroupDestroy(key: GlideString, groupName: GlideString): T;
    /**
     * Creates a consumer named `consumerName` in the consumer group `groupName` for the stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xgroup-createconsumer/|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param groupName - The consumer group name.
     * @param consumerName - The newly created consumer.
     *
     * Command Response - `true` if the consumer is created. Otherwise, returns `false`.
     */
    xgroupCreateConsumer(key: GlideString, groupName: GlideString, consumerName: GlideString): T;
    /**
     * Deletes a consumer named `consumerName` in the consumer group `groupName` for the stream stored at `key`.
     *
     * @see {@link https://valkey.io/commands/xgroup-delconsumer/|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param groupName - The consumer group name.
     * @param consumerName - The consumer to delete.
     *
     * Command Response - The number of pending messages the `consumer` had before it was deleted.
     */
    xgroupDelConsumer(key: GlideString, groupName: GlideString, consumerName: GlideString): T;
    /**
     * Returns the number of messages that were successfully acknowledged by the consumer group member of a stream.
     * This command should be called on a pending message so that such message does not get processed again.
     *
     * @see {@link https://valkey.io/commands/xack/|valkey.io} for details.
     *
     * @param key - The key of the stream.
     * @param group - The consumer group name.
     * @param ids - An array of entry ids.
     *
     * Command Response - The number of messages that were successfully acknowledged.
     */
    xack(key: GlideString, group: GlideString, ids: string[]): T;
    /**
     * Sets the last delivered ID for a consumer group.
     *
     * @see {@link https://valkey.io/commands/xgroup-setid|valkey.io} for more details.
     *
     * @param key - The key of the stream.
     * @param groupName - The consumer group name.
     * @param id - The stream entry ID that should be set as the last delivered ID for the consumer group.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `entriesRead`: the number of stream entries already read by the group.
     *     This option can only be specified if you are using Valkey version 7.0.0 or above.
     *
     * Command Response - `"OK"`.
     */
    xgroupSetId(key: GlideString, groupName: GlideString, id: string, options?: {
        entriesRead?: number;
    }): T;
    /**
     * Renames `key` to `newkey`.
     * If `newkey` already exists it is overwritten.
     *
     * @see {@link https://valkey.io/commands/rename/|valkey.io} for details.
     *
     * @param key - The key to rename.
     * @param newKey - The new name of the key.
     *
     * Command Response - If the `key` was successfully renamed, return "OK". If `key` does not exist, an error is thrown.
     */
    rename(key: GlideString, newKey: GlideString): T;
    /**
     * Renames `key` to `newkey` if `newkey` does not yet exist.
     *
     * @see {@link https://valkey.io/commands/renamenx/|valkey.io} for details.
     *
     * @param key - The key to rename.
     * @param newKey - The new name of the key.
     *
     * Command Response - If the `key` was successfully renamed, returns `true`. Otherwise, returns `false`.
     *     If `key` does not exist, an error is thrown.
     */
    renamenx(key: GlideString, newKey: GlideString): T;
    /** Blocking list pop primitive.
     * Pop an element from the tail of the first list that is non-empty,
     * with the given `keys` being checked in the order that they are given.
     * Blocks the connection when there are no elements to pop from any of the given lists.
     *
     * @see {@link https://valkey.io/commands/brpop/|valkey.io} for details.
     * @remarks `BRPOP` is a blocking command, see [Blocking Commands](https://github.com/valkey-io/valkey-glide/wiki/General-Concepts#blocking-commands) for more details and best practices.
     *
     * @param keys - The `keys` of the lists to pop from.
     * @param timeout - The `timeout` in seconds.
     *
     * Command Response - An `array` containing the `key` from which the element was popped and the value of the popped element,
     * formatted as [key, value]. If no element could be popped and the timeout expired, returns `null`.
     */
    brpop(keys: GlideString[], timeout: number): T;
    /** Blocking list pop primitive.
     * Pop an element from the head of the first list that is non-empty,
     * with the given `keys` being checked in the order that they are given.
     * Blocks the connection when there are no elements to pop from any of the given lists.
     *
     * @see {@link https://valkey.io/commands/blpop/|valkey.io} for details.
     * @remarks `BLPOP` is a blocking command, see [Blocking Commands](https://github.com/valkey-io/valkey-glide/wiki/General-Concepts#blocking-commands) for more details and best practices.
     *
     * @param keys - The `keys` of the lists to pop from.
     * @param timeout - The `timeout` in seconds.
     *
     * Command Response - An `array` containing the `key` from which the element was popped and the value of the popped element,
     * formatted as [key, value]. If no element could be popped and the timeout expired, returns `null`.
     */
    blpop(keys: GlideString[], timeout: number): T;
    /** Adds all elements to the HyperLogLog data structure stored at the specified `key`.
     * Creates a new structure if the `key` does not exist.
     * When no elements are provided, and `key` exists and is a HyperLogLog, then no operation is performed.
     *
     * @see {@link https://valkey.io/commands/pfadd/|valkey.io} for details.
     *
     * @param key - The key of the HyperLogLog data structure to add elements into.
     * @param elements - An array of members to add to the HyperLogLog stored at `key`.
     * Command Response - If the HyperLogLog is newly created, or if the HyperLogLog approximated cardinality is
     *     altered, then returns `1`. Otherwise, returns `0`.
     */
    pfadd(key: GlideString, elements: GlideString[]): T;
    /** Estimates the cardinality of the data stored in a HyperLogLog structure for a single key or
     * calculates the combined cardinality of multiple keys by merging their HyperLogLogs temporarily.
     *
     * @see {@link https://valkey.io/commands/pfcount/|valkey.io} for details.
     *
     * @param keys - The keys of the HyperLogLog data structures to be analyzed.
     * Command Response - The approximated cardinality of given HyperLogLog data structures.
     *     The cardinality of a key that does not exist is `0`.
     */
    pfcount(keys: GlideString[]): T;
    /**
     * Merges multiple HyperLogLog values into a unique value. If the destination variable exists, it is
     * treated as one of the source HyperLogLog data sets, otherwise a new HyperLogLog is created.
     *
     * @see {@link https://valkey.io/commands/pfmerge/|valkey.io} for details.
     *
     * @param destination - The key of the destination HyperLogLog where the merged data sets will be stored.
     * @param sourceKeys - The keys of the HyperLogLog structures to be merged.
     * Command Response - A simple "OK" response.
     */
    pfmerge(destination: GlideString, sourceKeys: GlideString[]): T;
    /**
     * Returns the internal encoding for the Valkey object stored at `key`.
     *
     * @see {@link https://valkey.io/commands/object-encoding/|valkey.io} for more details.
     *
     * @param key - The `key` of the object to get the internal encoding of.
     *
     * Command Response - If `key` exists, returns the internal encoding of the object stored at `key` as a string.
     *     Otherwise, returns None.
     */
    objectEncoding(key: GlideString): T;
    /**
     * Returns the logarithmic access frequency counter of a Valkey object stored at `key`.
     *
     * @see {@link https://valkey.io/commands/object-freq/|valkey.io} for more details.
     *
     * @param key - The `key` of the object to get the logarithmic access frequency counter of.
     *
     * Command Response - If `key` exists, returns the logarithmic access frequency counter of
     *     the object stored at `key` as a `number`. Otherwise, returns `null`.
     */
    objectFreq(key: GlideString): T;
    /**
     * Returns the time in seconds since the last access to the value stored at `key`.
     *
     * @see {@link https://valkey.io/commands/object-idletime/|valkey.io} for details.
     *
     * @param key - The key of the object to get the idle time of.
     *
     * Command Response - If `key` exists, returns the idle time in seconds. Otherwise, returns `null`.
     */
    objectIdletime(key: GlideString): T;
    /**
     * Returns the reference count of the object stored at `key`.
     *
     * @see {@link https://valkey.io/commands/object-refcount/|valkey.io} for details.
     *
     * @param key - The `key` of the object to get the reference count of.
     *
     * Command Response - If `key` exists, returns the reference count of the object stored at `key` as a `number`.
     *     Otherwise, returns `null`.
     */
    objectRefcount(key: GlideString): T;
    /**
     * Displays a piece of generative computer art and the server version.
     *
     * @see {@link https://valkey.io/commands/lolwut/|valkey.io} for details.
     *
     * @param options - (Optional) The LOLWUT options - see {@link LolwutOptions}.
     *
     * Command Response - A piece of generative computer art along with the current server version.
     */
    lolwut(options?: LolwutOptions): T;
    /**
     * Blocks the current client until all the previous write commands are successfully transferred and
     * acknowledged by at least `numreplicas` of replicas. If `timeout` is reached, the command returns
     * the number of replicas that were not yet reached.
     *
     * @see {@link https://valkey.io/commands/wait/|valkey.io} for more details.
     *
     * @param numreplicas - The number of replicas to reach.
     * @param timeout - The timeout value specified in milliseconds. A value of 0 will block indefinitely.
     *
     * Command Response - The number of replicas reached by all the writes performed in the context of the
     *     current connection.
     */
    wait(numreplicas: number, timeout: number): T;
    /**
     * Invokes a previously loaded function.
     *
     * @see {@link https://valkey.io/commands/fcall/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param func - The function name.
     * @param keys - A list of `keys` accessed by the function. To ensure the correct execution of functions,
     *     all names of keys that a function accesses must be explicitly provided as `keys`.
     * @param args - A list of `function` arguments and it should not represent names of keys.
     *
     * Command Response - The invoked function's return value.
     */
    fcall(func: GlideString, keys: GlideString[], args: GlideString[]): T;
    /**
     * Invokes a previously loaded read-only function.
     *
     * @see {@link https://valkey.io/commands/fcall/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param func - The function name.
     * @param keys - A list of `keys` accessed by the function. To ensure the correct execution of functions,
     *     all names of keys that a function accesses must be explicitly provided as `keys`.
     * @param args - A list of `function` arguments and it should not represent names of keys.
     *
     * Command Response - The invoked function's return value.
     */
    fcallReadonly(func: GlideString, keys: GlideString[], args: GlideString[]): T;
    /**
     * Deletes a library and all its functions.
     *
     * @see {@link https://valkey.io/commands/function-delete/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param libraryCode - The library name to delete.
     *
     * Command Response - `"OK"`.
     */
    functionDelete(libraryCode: GlideString): T;
    /**
     * Loads a library to Valkey.
     *
     * @see {@link https://valkey.io/commands/function-load/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param libraryCode - The source code that implements the library.
     * @param replace - (Optional) Whether the given library should overwrite a library with the same name if it
     *     already exists.
     *
     * Command Response - The library name that was loaded.
     */
    functionLoad(libraryCode: GlideString, replace?: boolean): T;
    /**
     * Deletes all function libraries.
     *
     * @see {@link https://valkey.io/commands/function-flush/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param mode - (Optional) The flushing mode, could be either {@link FlushMode.SYNC} or {@link FlushMode.ASYNC}.
     * Command Response - `"OK"`.
     */
    functionFlush(mode?: FlushMode): T;
    /**
     * Returns information about the functions and libraries.
     *
     * @see {@link https://valkey.io/commands/function-list/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param options - (Optional) Parameters to filter and request additional info.
     *
     * Command Response - Info about all or selected libraries and their functions in {@link FunctionListResponse} format.
     */
    functionList(options?: FunctionListOptions): T;
    /**
     * Returns information about the function that's currently running and information about the
     * available execution engines.
     *
     * @see {@link https://valkey.io/commands/function-stats/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * Command Response - A `Record` of type {@link FunctionStatsSingleResponse} with two keys:
     *
     * - `"running_script"` with information about the running script.
     * - `"engines"` with information about available engines and their stats.
     */
    functionStats(): T;
    /**
     * Returns the serialized payload of all loaded libraries.
     *
     * @see {@link https://valkey.io/commands/function-dump/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     * @remarks To execute a transaction with a `functionDump` command, the `exec` command requires `Decoder.Bytes` to handle the response.
     *
     * Command Response - The serialized payload of all loaded libraries.
     */
    functionDump(): T;
    /**
     * Restores libraries from the serialized payload returned by {@link functionDump}.
     *
     * @see {@link https://valkey.io/commands/function-restore/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param payload - The serialized data from {@link functionDump}.
     * @param policy - (Optional) A policy for handling existing libraries.
     *
     * Command Response - `"OK"`.
     */
    functionRestore(payload: Buffer, policy?: FunctionRestorePolicy): T;
    /**
     * Deletes all the keys of all the existing databases. This command never fails.
     *
     * @see {@link https://valkey.io/commands/flushall/|valkey.io} for details.
     *
     * @param mode - (Optional) The flushing mode, could be either {@link FlushMode.SYNC} or {@link FlushMode.ASYNC}.
     *
     * Command Response - `"OK"`.
     */
    flushall(mode?: FlushMode): T;
    /**
     * Deletes all the keys of the currently selected database. This command never fails.
     *
     * @see {@link https://valkey.io/commands/flushdb/|valkey.io} for details.
     *
     * @param mode - (Optional) The flushing mode, could be either {@link FlushMode.SYNC} or {@link FlushMode.ASYNC}.
     *
     * Command Response - `"OK"`.
     */
    flushdb(mode?: FlushMode): T;
    /**
     * Returns the index of the first occurrence of `element` inside the list specified by `key`. If no
     * match is found, `null` is returned. If the `count` option is specified, then the function returns
     * an `array` of indices of matching elements within the list.
     *
     * @see {@link https://valkey.io/commands/lpos/|valkey.io} for details.
     * @remarks Since Valkey version 6.0.6.
     *
     * @param key - The name of the list.
     * @param element - The value to search for within the list.
     * @param options - (Optional) The LPOS options - see {@link LPosOptions}.
     *
     * Command Response - The index of `element`, or `null` if `element` is not in the list. If the `count`
     * option is specified, then the function returns an `array` of indices of matching elements within the list.
     */
    lpos(key: GlideString, element: GlideString, options?: LPosOptions): T;
    /**
     * Returns the number of keys in the currently selected database.
     *
     * @see {@link https://valkey.io/commands/dbsize/|valkey.io} for details.
     *
     * Command Response - The number of keys in the currently selected database.
     */
    dbsize(): T;
    /**
     * Counts the number of set bits (population counting) in the string stored at `key`. The `options` argument can
     * optionally be provided to count the number of bits in a specific string interval.
     *
     * @see {@link https://valkey.io/commands/bitcount/|valkey.io} for more details.
     *
     * @param key - The key for the string to count the set bits of.
     * @param options - The offset options - see {@link BitOffsetOptions}.
     *
     * Command Response - If `options` is provided, returns the number of set bits in the string interval specified by `options`.
     *     If `options` is not provided, returns the number of set bits in the string stored at `key`.
     *     Otherwise, if `key` is missing, returns `0` as it is treated as an empty string.
     */
    bitcount(key: GlideString, options?: BitOffsetOptions): T;
    /**
     * Adds geospatial members with their positions to the specified sorted set stored at `key`.
     * If a member is already a part of the sorted set, its position is updated.
     *
     * @see {@link https://valkey.io/commands/geoadd/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param membersToGeospatialData - A mapping of member names to their corresponding positions - see
     *     {@link GeospatialData}. The command will report an error when the user attempts to index
     *     coordinates outside the specified ranges.
     * @param options - The GeoAdd options - see {@link GeoAddOptions}.
     *
     * Command Response - The number of elements added to the sorted set. If `changed` is set to
     *    `true` in the options, returns the number of elements updated in the sorted set.
     */
    geoadd(key: GlideString, membersToGeospatialData: Map<GlideString, GeospatialData>, options?: GeoAddOptions): T;
    /**
     * Returns the members of a sorted set populated with geospatial information using {@link geoadd},
     * which are within the borders of the area specified by a given shape.
     *
     * @see {@link https://valkey.io/commands/geosearch/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param key - The key of the sorted set.
     * @param searchFrom - The query's center point options, could be one of:
     *
     * - {@link MemberOrigin} to use the position of the given existing member in the sorted set.
     *
     * - {@link CoordOrigin} to use the given longitude and latitude coordinates.
     *
     * @param searchBy - The query's shape options, could be one of:
     *
     * - {@link GeoCircleShape} to search inside circular area according to given radius.
     *
     * - {@link GeoBoxShape} to search inside an axis-aligned rectangle, determined by height and width.
     *
     * @param resultOptions - The optional inputs to request additional information and configure sorting/limiting the results, see {@link GeoSearchResultOptions}.
     *
     * Command Response - By default, returns an `Array` of members (locations) names.
     *     If any of `withCoord`, `withDist` or `withHash` are set to `true` in {@link GeoSearchResultOptions}, a 2D `Array` returned,
     *     where each sub-array represents a single item in the following order:
     *
     * - The member (location) name.
     * - The distance from the center as a floating point `number`, in the same unit specified for `searchBy`.
     * - The geohash of the location as a integer `number`.
     * - The coordinates as a two item `array` of floating point `number`s.
     */
    geosearch(key: GlideString, searchFrom: SearchOrigin, searchBy: GeoSearchShape, resultOptions?: GeoSearchResultOptions): T;
    /**
     * Searches for members in a sorted set stored at `source` representing geospatial data
     * within a circular or rectangular area and stores the result in `destination`.
     *
     * If `destination` already exists, it is overwritten. Otherwise, a new sorted set will be created.
     *
     * To get the result directly, see {@link geosearch}.
     *
     * @see {@link https://valkey.io/commands/geosearchstore/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param destination - The key of the destination sorted set.
     * @param source - The key of the sorted set.
     * @param searchFrom - The query's center point options, could be one of:
     * - {@link MemberOrigin} to use the position of the given existing member in the sorted set.
     * - {@link CoordOrigin} to use the given longitude and latitude coordinates.
     * @param searchBy - The query's shape options, could be one of:
     * - {@link GeoCircleShape} to search inside circular area according to given radius.
     * - {@link GeoBoxShape} to search inside an axis-aligned rectangle, determined by height and width.
     * @param resultOptions - (Optional) Parameters to request additional information and configure sorting/limiting the results, see {@link GeoSearchStoreResultOptions}.
     *
     * Command Response - The number of elements in the resulting sorted set stored at `destination`.
     */
    geosearchstore(destination: GlideString, source: GlideString, searchFrom: SearchOrigin, searchBy: GeoSearchShape, resultOptions?: GeoSearchStoreResultOptions): T;
    /**
     * Returns the positions (longitude, latitude) of all the specified `members` of the
     * geospatial index represented by the sorted set at `key`.
     *
     * @see {@link https://valkey.io/commands/geopos/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param members - The members for which to get the positions.
     *
     * Command Response - A 2D `Array` which represents positions (longitude and latitude) corresponding to the
     *     given members. The order of the returned positions matches the order of the input members.
     *     If a member does not exist, its position will be `null`.
     */
    geopos(key: GlideString, members: GlideString[]): T;
    /**
     * Pops member-score pairs from the first non-empty sorted set, with the given `keys`
     * being checked in the order they are provided.
     *
     * @see {@link https://valkey.io/commands/zmpop/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - The keys of the sorted sets.
     * @param modifier - The element pop criteria - either {@link ScoreFilter.MIN} or
     *     {@link ScoreFilter.MAX} to pop the member with the lowest/highest score accordingly.
     * @param count - (Optional) The number of elements to pop. If not supplied, only one element will be popped.
     *
     * Command Response - A two-element `array` containing the key name of the set from which the
     *     was popped, and a `GlideRecord<number>` of the popped elements - see {@link GlideRecord}.
     *     If no member could be popped, returns `null`.
     */
    zmpop(keys: GlideString[], modifier: ScoreFilter, count?: number): T;
    /**
     * Pops a member-score pair from the first non-empty sorted set, with the given `keys` being
     * checked in the order they are provided. Blocks the connection when there are no members
     * to pop from any of the given sorted sets. `BZMPOP` is the blocking variant of {@link zmpop}.
     *
     * @see {@link https://valkey.io/commands/bzmpop/|valkey.io} for details.
     * @remarks `BZMPOP` is a client blocking command, see {@link https://github.com/valkey-io/valkey-glide/wiki/General-Concepts#blocking-commands | Valkey Glide Wiki} for more details and best practices.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - The keys of the sorted sets.
     * @param modifier - The element pop criteria - either {@link ScoreFilter.MIN} or
     *     {@link ScoreFilter.MAX} to pop the member with the lowest/highest score accordingly.
     * @param timeout - The number of seconds to wait for a blocking operation to complete. A value of `0` will block indefinitely.
     * @param count - (Optional) The number of elements to pop. If not supplied, only one element will be popped.
     *
     * Command Response - A two-element `array` containing the key name of the set from which the element
     *     was popped, and a `GlideRecord<number>` of the popped elements - see {@link GlideRecord}.
     *     If no member could be popped, returns `null`.
     */
    bzmpop(keys: GlideString[], modifier: ScoreFilter, timeout: number, count?: number): T;
    /**
     * Increments the score of `member` in the sorted set stored at `key` by `increment`.
     * If `member` does not exist in the sorted set, it is added with `increment` as its score.
     * If `key` does not exist, a new sorted set is created with the specified member as its sole member.
     *
     * @see {@link https://valkey.io/commands/zincrby/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param increment - The score increment.
     * @param member - A member of the sorted set.
     *
     * Command Response - The new score of `member`.
     */
    zincrby(key: GlideString, increment: number, member: GlideString): T;
    /**
     * Iterates incrementally over a sorted set.
     *
     * @see {@link https://valkey.io/commands/zscan/|valkey.io} for more details.
     *
     * @param key - The key of the sorted set.
     * @param cursor - The cursor that points to the next iteration of results. A value of `"0"` indicates the start of
     *      the search.
     * @param options - (Optional) The `zscan` options - see {@link ZScanOptions}
     *
     * Command Response - An `Array` of the `cursor` and the subset of the sorted set held by `key`.
     *      The first element is always the `cursor` for the next iteration of results. `0` will be the `cursor`
     *      returned on the last iteration of the sorted set. The second element is always an `Array` of the subset
     *      of the sorted set held in `key`. The `Array` in the second element is a flattened series of
     *      `String` pairs, where the value is at even indices and the score is at odd indices.
     *      If `options.noScores` is to `true`, the second element will only contain the members without scores.
     */
    zscan(key: GlideString, cursor: string, options?: ZScanOptions): T;
    /**
     * Returns the distance between `member1` and `member2` saved in the geospatial index stored at `key`.
     *
     * @see {@link https://valkey.io/commands/geodist/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param member1 - The name of the first member.
     * @param member2 - The name of the second member.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `unit`: the unit of distance measurement - see {@link GeoUnit}.
     *   If not specified, the {@link GeoUnit.METERS} is used as a default unit.
     *
     * Command Response - The distance between `member1` and `member2`. Returns `null`, if one or both members do not exist,
     *     or if the key does not exist.
     */
    geodist(key: GlideString, member1: GlideString, member2: GlideString, options?: {
        unit?: GeoUnit;
    }): T;
    /**
     * Returns the `GeoHash` strings representing the positions of all the specified `members` in the sorted set stored at `key`.
     *
     * @see {@link https://valkey.io/commands/geohash/|valkey.io} for details.
     *
     * @param key - The key of the sorted set.
     * @param members - The array of members whose `GeoHash` strings are to be retrieved.
     *
     * Command Response - An array of `GeoHash` strings representing the positions of the specified members stored at `key`.
     *   If a member does not exist in the sorted set, a `null` value is returned for that member.
     */
    geohash(key: GlideString, members: GlideString[]): T;
    /**
     * Returns `UNIX TIME` of the last DB save timestamp or startup timestamp if no save
     * was made since then.
     *
     * @see {@link https://valkey.io/commands/lastsave/|valkey.io} for details.
     *
     * Command Response - `UNIX TIME` of the last DB save executed with success.
     */
    lastsave(): T;
    /**
     * Returns all the longest common subsequences combined between strings stored at `key1` and `key2`.
     *
     * @see {@link https://valkey.io/commands/lcs/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param key1 - The key that stores the first string.
     * @param key2 - The key that stores the second string.
     *
     * Command Response - A `String` containing all the longest common subsequence combined between the 2 strings.
     *     An empty `String` is returned if the keys do not exist or have no common subsequences.
     */
    lcs(key1: GlideString, key2: GlideString): T;
    /**
     * Returns the total length of all the longest common subsequences between strings stored at `key1` and `key2`.
     *
     * @see {@link https://valkey.io/commands/lcs/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param key1 - The key that stores the first string.
     * @param key2 - The key that stores the second string.
     *
     * Command Response - The total length of all the longest common subsequences between the 2 strings.
     */
    lcsLen(key1: GlideString, key2: GlideString): T;
    /**
     * Returns the indices and lengths of the longest common subsequences between strings stored at
     * `key1` and `key2`.
     *
     * @see {@link https://valkey.io/commands/lcs/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param key1 - The key that stores the first string.
     * @param key2 - The key that stores the second string.
     * @param options - (Optional) Additional parameters:
     * - (Optional) `withMatchLen`: if `true`, include the length of the substring matched for the each match.
     * - (Optional) `minMatchLen`: the minimum length of matches to include in the result.
     *
     * Command Response - A {@link GlideRecord} containing the indices of the longest common subsequences between
     *     the 2 strings and the lengths of the longest common subsequences. The resulting map contains two
     *     keys, "matches" and "len":
     *     - `"len"` is mapped to the total length of the all longest common subsequences between the 2 strings
     *           stored as an integer. This value doesn't count towards the `minMatchLen` filter.
     *     - `"matches"` is mapped to a three dimensional array of integers that stores pairs
     *           of indices that represent the location of the common subsequences in the strings held
     *           by `key1` and `key2`.
     *
     *     See example of {@link BaseClient.lcsIdx|lcsIdx} for more details.
     */
    lcsIdx(key1: GlideString, key2: GlideString, options?: {
        withMatchLen?: boolean;
        minMatchLen?: number;
    }): T;
    /**
     * Updates the last access time of the specified keys.
     *
     * @see {@link https://valkey.io/commands/touch/|valkey.io} for details.
     *
     * @param keys - The keys to update the last access time of.
     *
     * Command Response - The number of keys that were updated. A key is ignored if it doesn't exist.
     */
    touch(keys: GlideString[]): T;
    /**
     * Returns a random existing key name from the currently selected database.
     *
     * @see {@link https://valkey.io/commands/randomkey/|valkey.io} for details.
     *
     * Command Response - A random existing key name from the currently selected database.
     */
    randomKey(): T;
    /**
     * Overwrites part of the string stored at `key`, starting at the specified byte `offset`,
     * for the entire length of `value`. If the `offset` is larger than the current length of the string at `key`,
     * the string is padded with zero bytes to make `offset` fit. Creates the `key` if it doesn't exist.
     *
     * @see {@link https://valkey.io/commands/setrange/|valkey.io} for details.
     *
     * @param key - The key of the string to update.
     * @param offset - The byte position in the string where `value` should be written.
     * @param value - The string written with `offset`.
     *
     * Command Response - The length of the string stored at `key` after it was modified.
     */
    setrange(key: GlideString, offset: number, value: GlideString): T;
    /**
     * Appends a `value` to a `key`. If `key` does not exist it is created and set as an empty string,
     * so `APPEND` will be similar to {@link set} in this special case.
     *
     * @see {@link https://valkey.io/commands/append/|valkey.io} for details.
     *
     * @param key - The key of the string.
     * @param value - The key of the string.
     *
     * Command Response - The length of the string after appending the value.
     */
    append(key: GlideString, value: GlideString): T;
    /**
     * Pops one or more elements from the first non-empty list from the provided `keys`.
     *
     * @see {@link https://valkey.io/commands/lmpop/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - An array of keys to lists.
     * @param direction - The direction based on which elements are popped from - see {@link ListDirection}.
     * @param count - (Optional) The maximum number of popped elements.
     *
     * Command Response - A `Record` which stores the key name where elements were popped out and the array of popped elements.
     */
    lmpop(keys: GlideString[], direction: ListDirection, count?: number): T;
    /**
     * Blocks the connection until it pops one or more elements from the first non-empty list from the
     * provided `key`. `BLMPOP` is the blocking variant of {@link lmpop}.
     *
     * @see {@link https://valkey.io/commands/blmpop/|valkey.io} for details.
     * @remarks Since Valkey version 7.0.0.
     *
     * @param keys - An array of keys to lists.
     * @param direction - The direction based on which elements are popped from - see {@link ListDirection}.
     * @param timeout - The number of seconds to wait for a blocking operation to complete. A value of
     *     `0` will block indefinitely.
     * @param count - (Optional) The maximum number of popped elements.
     *
     * Command Response - A `Record` which stores the key name where elements were popped out and the array of popped elements.
     *     If no member could be popped and the timeout expired, returns `null`.
     */
    blmpop(keys: GlideString[], direction: ListDirection, timeout: number, count?: number): T;
    /**
     * Lists the currently active channels.
     * The command is routed to all nodes, and aggregates the response to a single array.
     *
     * @see {@link https://valkey.io/commands/pubsub-channels/|valkey.io} for more details.
     *
     * @param pattern - A glob-style pattern to match active channels.
     *                  If not provided, all active channels are returned.
     * Command Response - A list of currently active channels matching the given pattern.
     *          If no pattern is specified, all active channels are returned.
     */
    pubsubChannels(pattern?: GlideString): T;
    /**
     * Returns the number of unique patterns that are subscribed to by clients.
     *
     * Note: This is the total number of unique patterns all the clients are subscribed to,
     * not the count of clients subscribed to patterns.
     * The command is routed to all nodes, and aggregates the response to the sum of all pattern subscriptions.
     *
     * @see {@link https://valkey.io/commands/pubsub-numpat/|valkey.io} for more details.
     *
     * Command Response - The number of unique patterns.
     */
    pubsubNumPat(): T;
    /**
     * Returns the number of subscribers (exclusive of clients subscribed to patterns) for the specified channels.
     *
     * @see {@link https://valkey.io/commands/pubsub-numsub/|valkey.io} for more details.
     *
     * @param channels - The list of channels to query for the number of subscribers.
     *
     * Command Response - A list of the channel names and their numbers of subscribers.
     */
    pubsubNumSub(channels: GlideString[]): T;
    /**
     * Sorts the elements in the list, set, or sorted set at `key` and returns the result.
     *
     * The `sort` command can be used to sort elements based on different criteria and
     * apply transformations on sorted elements.
     *
     * To store the result into a new key, see {@link sortStore}.
     *
     * @see {@link https://valkey.io/commands/sort/|valkey.io} for more details.
     * @remarks When in cluster mode, both `key` and the patterns specified in {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} must map to the same hash slot. The use of {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} in cluster mode is supported since Valkey version 8.0.
     *
     * @param key - The key of the list, set, or sorted set to be sorted.
     * @param options - (Optional) {@link SortOptions}.
     *
     * Command Response - An `Array` of sorted elements.
     */
    sort(key: GlideString, options?: SortOptions): T;
    /**
     * Sorts the elements in the list, set, or sorted set at `key` and returns the result.
     *
     * The `sortReadOnly` command can be used to sort elements based on different criteria and
     * apply transformations on sorted elements.
     *
     * This command is routed depending on the client's {@link ReadFrom} strategy.
     *
     * @remarks Since Valkey version 7.0.0.
     * @remarks When in cluster mode, both `key` and the patterns specified in {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} must map to the same hash slot. The use of {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} in cluster mode is supported since Valkey version 8.0.
     *
     * @param key - The key of the list, set, or sorted set to be sorted.
     * @param options - (Optional) {@link SortOptions}.
     *
     * Command Response - An `Array` of sorted elements
     */
    sortReadOnly(key: GlideString, options?: SortOptions): T;
    /**
     * Sorts the elements in the list, set, or sorted set at `key` and stores the result in
     * `destination`.
     *
     * The `sort` command can be used to sort elements based on different criteria and
     * apply transformations on sorted elements, and store the result in a new key.
     *
     * To get the sort result without storing it into a key, see {@link sort} or {@link sortReadOnly}.
     *
     * @see {@link https://valkey.io/commands/sort/|valkey.io} for more details.
     * @remarks When in cluster mode, `key`, `destination` and the patterns specified in {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} must map to the same hash slot. The use of {@link SortOptions.byPattern}
     * and {@link SortOptions.getPatterns} in cluster mode is supported since Valkey version 8.0.
     *
     * @param key - The key of the list, set, or sorted set to be sorted.
     * @param destination - The key where the sorted result will be stored.
     * @param options - (Optional) {@link SortOptions}.
     *
     * Command Response - The number of elements in the sorted key stored at `destination`.
     */
    sortStore(key: GlideString, destination: GlideString, options?: SortOptions): T;
}
/**
 * Extends BaseTransaction class for Valkey standalone commands.
 * Transactions allow the execution of a group of commands in a single step.
 *
 * Command Response:
 *  An array of command responses is returned by the GlideClient.exec command, in the order they were given.
 *  Each element in the array represents a command given to the transaction.
 *  The response for each command depends on the executed Valkey command.
 *  Specific response types are documented alongside each method.
 *
 * @example
 * ```typescript
 * const transaction = new Transaction()
 *    .set("key", "value")
 *    .select(1)  /// Standalone command
 *    .get("key");
 * const result = await GlideClient.exec(transaction);
 * console.log(result); // Output: ['OK', 'OK', null]
 * ```
 */
export declare class Transaction extends BaseTransaction<Transaction> {
    /**
     * Change the currently selected database.
     *
     * @see {@link https://valkey.io/commands/select/|valkey.io} for details.
     *
     * @param index - The index of the database to select.
     *
     * Command Response - A simple `"OK"` response.
     */
    select(index: number): Transaction;
    /**
     * Copies the value stored at the `source` to the `destination` key. If `destinationDB` is specified,
     * the value will be copied to the database specified, otherwise the current database will be used.
     * When `replace` is true, removes the `destination` key first if it already exists, otherwise performs
     * no action.
     *
     * @see {@link https://valkey.io/commands/copy/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param source - The key to the source value.
     * @param destination - The key where the value should be copied to.
     * @param destinationDB - (Optional) The alternative logical database index for the destination key.
     *     If not provided, the current database will be used.
     * @param replace - (Optional) If `true`, the `destination` key should be removed before copying the
     *     value to it. If not provided, no action will be performed if the key already exists.
     *
     * Command Response - `true` if `source` was copied, `false` if the `source` was not copied.
     */
    copy(source: GlideString, destination: GlideString, options?: {
        destinationDB?: number;
        replace?: boolean;
    }): Transaction;
    /**
     * Move `key` from the currently selected database to the database specified by `dbIndex`.
     *
     * @see {@link https://valkey.io/commands/move/|valkey.io} for details.
     *
     * @param key - The key to move.
     * @param dbIndex - The index of the database to move `key` to.
     *
     * Command Response - `true` if `key` was moved, or `false` if the `key` already exists in the destination
     *     database or does not exist in the source database.
     */
    move(key: GlideString, dbIndex: number): Transaction;
    /** Publish a message on pubsub channel.
     *
     * @see {@link https://valkey.io/commands/publish/|valkey.io} for more details.
     *
     * @param message - Message to publish.
     * @param channel - Channel to publish the message on.
     *
     * Command Response -  Number of subscriptions in primary node that received the message.
     * Note that this value does not include subscriptions that configured on replicas.
     */
    publish(message: GlideString, channel: GlideString): Transaction;
}
/**
 * Extends BaseTransaction class for cluster mode commands.
 * Transactions allow the execution of a group of commands in a single step.
 *
 * Command Response:
 *  An array of command responses is returned by the GlideClusterClient.exec command, in the order they were given.
 *  Each element in the array represents a command given to the transaction.
 *  The response for each command depends on the executed Valkey command.
 *  Specific response types are documented alongside each method.
 *
 */
export declare class ClusterTransaction extends BaseTransaction<ClusterTransaction> {
    /**
     * Copies the value stored at the `source` to the `destination` key. When `replace` is true,
     * removes the `destination` key first if it already exists, otherwise performs no action.
     *
     * @see {@link https://valkey.io/commands/copy/|valkey.io} for details.
     * @remarks Since Valkey version 6.2.0.
     *
     * @param source - The key to the source value.
     * @param destination - The key where the value should be copied to.
     * @param replace - (Optional) If `true`, the `destination` key should be removed before copying the
     *     value to it. If not provided, no action will be performed if the key already exists.
     *
     * Command Response - `true` if `source` was copied, `false` if the `source` was not copied.
     */
    copy(source: GlideString, destination: GlideString, options?: {
        replace?: boolean;
    }): ClusterTransaction;
    /** Publish a message on pubsub channel.
     * This command aggregates PUBLISH and SPUBLISH commands functionalities.
     * The mode is selected using the 'sharded' parameter.
     * For both sharded and non-sharded mode, request is routed using hashed channel as key.
     *
     * @see {@link https://valkey.io/commands/publish} and {@link https://valkey.io/commands/spublish} for more details.
     *
     * @param message - Message to publish.
     * @param channel - Channel to publish the message on.
     * @param sharded - Use sharded pubsub mode. Available since Valkey version 7.0.
     *
     * Command Response -  Number of subscriptions in primary node that received the message.
     */
    publish(message: GlideString, channel: GlideString, sharded?: boolean): ClusterTransaction;
    /**
     * Lists the currently active shard channels.
     * The command is routed to all nodes, and aggregates the response to a single array.
     *
     * @see {@link https://valkey.io/commands/pubsub-shardchannels|valkey.io} for more details.
     *
     * @param pattern - A glob-style pattern to match active shard channels.
     *                  If not provided, all active shard channels are returned.
     *
     * Command Response - A list of currently active shard channels matching the given pattern.
     *          If no pattern is specified, all active shard channels are returned.
     */
    pubsubShardChannels(pattern?: GlideString): ClusterTransaction;
    /**
     * Returns the number of subscribers (exclusive of clients subscribed to patterns) for the specified shard channels.
     *
     * @see {@link https://valkey.io/commands/pubsub-shardnumsub|valkey.io} for more details.
     * @remarks The command is routed to all nodes, and aggregates the response into a single list.
     *
     * @param channels - The list of shard channels to query for the number of subscribers.
     *
     * Command Response - A list of the shard channel names and their numbers of subscribers.
     */
    pubsubShardNumSub(channels: GlideString[]): ClusterTransaction;
}