import type Geometry from "@arcgis/core/geometry/Geometry";
import type Point from "@arcgis/core/geometry/Point";
import type Polygon from "@arcgis/core/geometry/Polygon";
import type Polyline from "@arcgis/core/geometry/Polyline";
import type SpatialReference from "@arcgis/core/geometry/SpatialReference";
import type GeographicTransformation from "@arcgis/core/geometry/support/GeographicTransformation";
import type { Command } from "../Command.js";
import { CommandRegistry } from "../CommandRegistry.js";
import type { Operation } from "../Operation.js";
import { OperationRegistry } from "../OperationRegistry.js";
import type { Geometries, HasFeatures, HasGeometry, HasMaps, HasUITarget, MapsLike } from "../common.js";
import type { CaptureGeometryResult } from "./sketching.js";
/**
 * Arguments for the geometry.project operation.
 */
export interface ProjectArgs {
    /**
     * The geometries to project.
     */
    geometries: Geometry | Geometry[];
    /**
     * The target spatial reference.
     */
    outSpatialReference: SpatialReference;
    /**
     * The geographic transformation which contains the steps to transform the
     * input spatial reference to the output spatial reference.
     */
    transformation?: GeographicTransformation;
}
/**
 * The units for distance buffers supported by ArcGIS.
 */
export type LengthUnits = "meters" | "feet" | "kilometers" | "miles" | "nautical-miles" | "yards";
/**
 * The units for distance supported by Mobile.
 */
export type LengthUnitsMobile = LengthUnits | "millimeters" | "centimeters" | "inches" | "mm" | "cm" | "m" | "km" | "in" | "ft" | "yd" | "mi" | "nm";
/**
 * The result of a geometry.buffer operation.
 */
export interface BufferResult {
    /**
     * The buffered geometry.
     */
    geometry: Geometry | Geometry[];
    /**
     * Any maps that were included within the input arguments.
     */
    maps?: MapsLike;
}
/**
 * Arguments for the geometry.add-point operation.
 */
export interface AddPointArgs {
    /**
     * The starting geometry.
     */
    geometry: Polyline | Polygon;
    /**
     * The index of the part to which the point will be added. If null, the last
     * part will be used.
     */
    partIndex?: number;
    /**
     * The index at which the point will be added. If null, the point will be
     * added as the last point.
     */
    pointIndex?: number;
    /**
     * The new point to be added to 'geometry'. The spatial reference must match
     * 'geometry' or an error will be thrown.
     */
    newPoint: Point;
}
/**
 * Arguments for the geometry.add-part operation.
 */
export interface AddPartArgs {
    /**
     * The starting geometry.
     */
    geometry: Polyline | Polygon;
    /**
     * The new part to be added to 'geometry'.
     */
    part: Point[];
}
/**
 * A reference line used by the geometry.get-point operation.
 */
export interface ReferenceLine {
    /**
     * The geometry that contains the reference line.
     */
    geometry: Polyline | Polygon;
    /**
     * The index of the part in 'geometry' that contains the reference line. If
     * null, the last part will be used.
     */
    partIndex?: number;
    /**
     * The index of the segment that will be used as the reference line. If
     * null, the last segment will be used.
     */
    segmentIndex?: number;
}
/**
 * The different types of curves that can be used for geodetic distance
 * calculations.
 */
export type GeodeticCurveType = "geodesic" | "loxodrome" | "normal-section" | "great-elliptic";
/**
 * Arguments for the geometry.calculate-point operation.
 */
export interface CalculatePointArgs {
    /**
     * The units to be used for 'distance' and 'offset'. Defaults to the default
     * units of the map.
     */
    units: LengthUnitsMobile;
    /**
     * The reference line that will be used to calculate the new point.
     */
    referenceLine: ReferenceLine;
    /**
     * The distance that will be used to calculate the new point.
     *
     * If using 'offset', this indicates the distance along the reference line.
     *
     * If using 'angle', this indicates the distance directly from the new point
     * to the start point of the reference line.
     *
     * Cannot be negative.
     */
    distance: number;
    /**
     * The offset that will be used to calculate the new point. The 'offset'
     * corresponds to the distance perpendicularly away from the reference
     * line.
     *
     * Positive values will result in a point to the right of the reference
     * line, negative values will be to the left.
     *
     * Exactly one of 'offset' and 'angle' must be set.
     */
    offset?: number;
    /**
     * The angle, relative to the angle of the reference line, that will be used
     * to calculate the new point. Positive angles are calculated clockwise from
     * the angle of the reference line, negative angles are calculated
     * counter-clockwise.
     *
     * Exactly one of 'offset' and 'angle' must be set.
     */
    angle?: number;
    /**
     * Whether the distance calculations will be geodetic or planar. Defaults to
     * true.
     */
    geodetic?: boolean;
    /**
     * The geodetic curve type used when calculating the new point. Only applies
     * when 'geodetic' is true. Defaults to 'geodesic'.
     */
    geodeticCurveType: GeodeticCurveType;
}
/**
 * Arguments for the geometry.remove-point operation.
 */
export interface RemovePointArgs {
    /**
     * The starting geometry.
     */
    geometry: Polyline | Polygon;
    /**
     * The index of the part from which the point will be removed. If null, the
     * last part will be used.
     */
    partIndex?: number;
    /**
     * The index of the point to be removed. If null, the last point wil be
     * removed.
     */
    pointIndex?: number;
}
/**
 * Arguments for the geometry.buffer operation.
 */
export interface BufferGeometryArgs extends HasGeometry, HasFeatures {
    /**
     * Optionally override the configured buffer distance.
     */
    bufferDistance?: number;
}
export declare class GeometryOperations extends OperationRegistry {
    protected readonly _prefix = "geometry";
    /**
     * Projects a set of geometries to a new spatial reference. Web only.
     *
     * @webOnly
     */
    get project(): Operation<ProjectArgs, Geometry[]>;
    /**
     * Buffers a point geometry by a distance equivalent to the number of pixels
     * at the current map scale. Web only.
     *
     * @webOnly
     */
    get addPixelTolerance(): Operation<(HasFeatures | HasGeometry) & Required<HasMaps>, CaptureGeometryResult>;
    /**
     * Buffers a set of geometries by some distance to create a multi-part
     * polygon geometry. The distance value respects the user's preferences and
     * falls back on the default configured for the viewer session. Web only.
     *
     * @webOnly
     */
    get buffer(): Operation<BufferGeometryArgs | Geometries, BufferResult>;
    /**
     * Returns the default buffer distance for the viewer session. Web only.
     *
     * @webOnly
     */
    get getBufferDistance(): Operation<void, number>;
    /**
     * Returns the default buffer units for the viewer session. Web only.
     *
     * @webOnly
     */
    get getBufferUnits(): Operation<void, LengthUnits>;
    /**
     * Adds a point to a given geometry. Mobile only.
     *
     * @mobileOnly
     */
    get addPoint(): Operation<AddPointArgs, Geometry>;
    /**
     * Adds a part to a given geometry. Mobile only.
     *
     * @mobileOnly
     */
    get addPart(): Operation<AddPartArgs, Geometry>;
    /**
     * Calculates a point relative to a given reference line. Mobile only.
     *
     * @mobileOnly
     */
    get calculatePoint(): Operation<CalculatePointArgs, Point>;
    /**
     * Removes a point from a given geometry. Mobile only.
     *
     * @mobileOnly
     */
    get removePoint(): Operation<RemovePointArgs, Geometry>;
}
export declare class GeometryCommands extends CommandRegistry {
    protected readonly _prefix = "geometry";
    /**
     * Display the geometry settings dialog. This allows you to configure buffer
     * distance and buffer units. Web only.
     *
     * @webOnly
     */
    get displaySettings(): Command<HasUITarget>;
    /**
     * Sets the default buffer distance for the viewer session. The buffer
     * distance must be a number > 0. Web only.
     *
     * @webOnly
     */
    get setBufferDistance(): Command<number>;
    /**
     * Sets the default buffer units for the viewer session. Web only.
     *
     * @webOnly
     */
    get setBufferUnits(): Command<LengthUnits>;
}