import {Request} from '../lib/request'; import {Response} from '../lib/response'; import {AWSError} from '../lib/error'; import {Service} from '../lib/service'; import {ServiceConfigurationOptions} from '../lib/service'; import {ConfigBase as Config} from '../lib/config'; interface Blob {} declare class Personalize extends Service { /** * Constructs a service object. This object has one method for each API operation. */ constructor(options?: Personalize.Types.ClientConfiguration) config: Config & Personalize.Types.ClientConfiguration; /** * Creates a campaign by deploying a solution version. When a client calls the GetRecommendations and GetPersonalizedRanking APIs, a campaign is specified in the request. Minimum Provisioned TPS and Auto-Scaling A transaction is a single GetRecommendations or GetPersonalizedRanking call. Transactions per second (TPS) is the throughput and unit of billing for Amazon Personalize. The minimum provisioned TPS (minProvisionedTPS) specifies the baseline throughput provisioned by Amazon Personalize, and thus, the minimum billing charge. If your TPS increases beyond minProvisionedTPS, Amazon Personalize auto-scales the provisioned capacity up and down, but never below minProvisionedTPS, to maintain a 70% utilization. There's a short time delay while the capacity is increased that might cause loss of transactions. It's recommended to start with a low minProvisionedTPS, track your usage using Amazon CloudWatch metrics, and then increase the minProvisionedTPS as necessary. Status A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the campaign status, call DescribeCampaign. Wait until the status of the campaign is ACTIVE before asking the campaign for recommendations. Related APIs ListCampaigns DescribeCampaign UpdateCampaign DeleteCampaign */ createCampaign(params: Personalize.Types.CreateCampaignRequest, callback?: (err: AWSError, data: Personalize.Types.CreateCampaignResponse) => void): Request; /** * Creates a campaign by deploying a solution version. When a client calls the GetRecommendations and GetPersonalizedRanking APIs, a campaign is specified in the request. Minimum Provisioned TPS and Auto-Scaling A transaction is a single GetRecommendations or GetPersonalizedRanking call. Transactions per second (TPS) is the throughput and unit of billing for Amazon Personalize. The minimum provisioned TPS (minProvisionedTPS) specifies the baseline throughput provisioned by Amazon Personalize, and thus, the minimum billing charge. If your TPS increases beyond minProvisionedTPS, Amazon Personalize auto-scales the provisioned capacity up and down, but never below minProvisionedTPS, to maintain a 70% utilization. There's a short time delay while the capacity is increased that might cause loss of transactions. It's recommended to start with a low minProvisionedTPS, track your usage using Amazon CloudWatch metrics, and then increase the minProvisionedTPS as necessary. Status A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the campaign status, call DescribeCampaign. Wait until the status of the campaign is ACTIVE before asking the campaign for recommendations. Related APIs ListCampaigns DescribeCampaign UpdateCampaign DeleteCampaign */ createCampaign(callback?: (err: AWSError, data: Personalize.Types.CreateCampaignResponse) => void): Request; /** * Creates an empty dataset and adds it to the specified dataset group. Use CreateDatasetImportJob to import your training data to a dataset. There are three types of datasets: Interactions Items Users Each dataset type has an associated schema with required field types. Only the Interactions dataset is required in order to train a model (also referred to as creating a solution). A dataset can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the dataset, call DescribeDataset. Related APIs CreateDatasetGroup ListDatasets DescribeDataset DeleteDataset */ createDataset(params: Personalize.Types.CreateDatasetRequest, callback?: (err: AWSError, data: Personalize.Types.CreateDatasetResponse) => void): Request; /** * Creates an empty dataset and adds it to the specified dataset group. Use CreateDatasetImportJob to import your training data to a dataset. There are three types of datasets: Interactions Items Users Each dataset type has an associated schema with required field types. Only the Interactions dataset is required in order to train a model (also referred to as creating a solution). A dataset can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the dataset, call DescribeDataset. Related APIs CreateDatasetGroup ListDatasets DescribeDataset DeleteDataset */ createDataset(callback?: (err: AWSError, data: Personalize.Types.CreateDatasetResponse) => void): Request; /** * Creates an empty dataset group. A dataset group contains related datasets that supply data for training a model. A dataset group can contain at most three datasets, one for each type of dataset: Interactions Items Users To train a model (create a solution), a dataset group that contains an Interactions dataset is required. Call CreateDataset to add a dataset to the group. A dataset group can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING To get the status of the dataset group, call DescribeDatasetGroup. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the creation failed. You must wait until the status of the dataset group is ACTIVE before adding a dataset to the group. You can specify an AWS Key Management Service (KMS) key to encrypt the datasets in the group. If you specify a KMS key, you must also include an AWS Identity and Access Management (IAM) role that has permission to access the key. APIs that require a dataset group ARN in the request CreateDataset CreateEventTracker CreateSolution Related APIs ListDatasetGroups DescribeDatasetGroup DeleteDatasetGroup */ createDatasetGroup(params: Personalize.Types.CreateDatasetGroupRequest, callback?: (err: AWSError, data: Personalize.Types.CreateDatasetGroupResponse) => void): Request; /** * Creates an empty dataset group. A dataset group contains related datasets that supply data for training a model. A dataset group can contain at most three datasets, one for each type of dataset: Interactions Items Users To train a model (create a solution), a dataset group that contains an Interactions dataset is required. Call CreateDataset to add a dataset to the group. A dataset group can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING To get the status of the dataset group, call DescribeDatasetGroup. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the creation failed. You must wait until the status of the dataset group is ACTIVE before adding a dataset to the group. You can specify an AWS Key Management Service (KMS) key to encrypt the datasets in the group. If you specify a KMS key, you must also include an AWS Identity and Access Management (IAM) role that has permission to access the key. APIs that require a dataset group ARN in the request CreateDataset CreateEventTracker CreateSolution Related APIs ListDatasetGroups DescribeDatasetGroup DeleteDatasetGroup */ createDatasetGroup(callback?: (err: AWSError, data: Personalize.Types.CreateDatasetGroupResponse) => void): Request; /** * Creates a job that imports training data from your data source (an Amazon S3 bucket) to an Amazon Personalize dataset. To allow Amazon Personalize to import the training data, you must specify an AWS Identity and Access Management (IAM) role that has permission to read from the data source. The dataset import job replaces any previous data in the dataset. Status A dataset import job can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED To get the status of the import job, call DescribeDatasetImportJob, providing the Amazon Resource Name (ARN) of the dataset import job. The dataset import is complete when the status shows as ACTIVE. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed. Importing takes time. You must wait until the status shows as ACTIVE before training a model using the dataset. Related APIs ListDatasetImportJobs DescribeDatasetImportJob */ createDatasetImportJob(params: Personalize.Types.CreateDatasetImportJobRequest, callback?: (err: AWSError, data: Personalize.Types.CreateDatasetImportJobResponse) => void): Request; /** * Creates a job that imports training data from your data source (an Amazon S3 bucket) to an Amazon Personalize dataset. To allow Amazon Personalize to import the training data, you must specify an AWS Identity and Access Management (IAM) role that has permission to read from the data source. The dataset import job replaces any previous data in the dataset. Status A dataset import job can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED To get the status of the import job, call DescribeDatasetImportJob, providing the Amazon Resource Name (ARN) of the dataset import job. The dataset import is complete when the status shows as ACTIVE. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed. Importing takes time. You must wait until the status shows as ACTIVE before training a model using the dataset. Related APIs ListDatasetImportJobs DescribeDatasetImportJob */ createDatasetImportJob(callback?: (err: AWSError, data: Personalize.Types.CreateDatasetImportJobResponse) => void): Request; /** * Creates an event tracker that you use when sending event data to the specified dataset group using the PutEvents API. When Amazon Personalize creates an event tracker, it also creates an event-interactions dataset in the dataset group associated with the event tracker. The event-interactions dataset stores the event data from the PutEvents call. The contents of this dataset are not available to the user. Only one event tracker can be associated with a dataset group. You will get an error if you call CreateEventTracker using the same dataset group as an existing event tracker. When you send event data you include your tracking ID. The tracking ID identifies the customer and authorizes the customer to send the data. The event tracker can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the event tracker, call DescribeEventTracker. The event tracker must be in the ACTIVE state before using the tracking ID. Related APIs ListEventTrackers DescribeEventTracker DeleteEventTracker */ createEventTracker(params: Personalize.Types.CreateEventTrackerRequest, callback?: (err: AWSError, data: Personalize.Types.CreateEventTrackerResponse) => void): Request; /** * Creates an event tracker that you use when sending event data to the specified dataset group using the PutEvents API. When Amazon Personalize creates an event tracker, it also creates an event-interactions dataset in the dataset group associated with the event tracker. The event-interactions dataset stores the event data from the PutEvents call. The contents of this dataset are not available to the user. Only one event tracker can be associated with a dataset group. You will get an error if you call CreateEventTracker using the same dataset group as an existing event tracker. When you send event data you include your tracking ID. The tracking ID identifies the customer and authorizes the customer to send the data. The event tracker can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the event tracker, call DescribeEventTracker. The event tracker must be in the ACTIVE state before using the tracking ID. Related APIs ListEventTrackers DescribeEventTracker DeleteEventTracker */ createEventTracker(callback?: (err: AWSError, data: Personalize.Types.CreateEventTrackerResponse) => void): Request; /** * Creates an Amazon Personalize schema from the specified schema string. The schema you create must be in Avro JSON format. Amazon Personalize recognizes three schema variants. Each schema is associated with a dataset type and has a set of required field and keywords. You specify a schema when you call CreateDataset. Related APIs ListSchemas DescribeSchema DeleteSchema */ createSchema(params: Personalize.Types.CreateSchemaRequest, callback?: (err: AWSError, data: Personalize.Types.CreateSchemaResponse) => void): Request; /** * Creates an Amazon Personalize schema from the specified schema string. The schema you create must be in Avro JSON format. Amazon Personalize recognizes three schema variants. Each schema is associated with a dataset type and has a set of required field and keywords. You specify a schema when you call CreateDataset. Related APIs ListSchemas DescribeSchema DeleteSchema */ createSchema(callback?: (err: AWSError, data: Personalize.Types.CreateSchemaResponse) => void): Request; /** * Creates the configuration for training a model. A trained model is known as a solution. After the configuration is created, you train the model (create a solution) by calling the CreateSolutionVersion operation. Every time you call CreateSolutionVersion, a new version of the solution is created. After creating a solution version, you check its accuracy by calling GetSolutionMetrics. When you are satisfied with the version, you deploy it using CreateCampaign. The campaign provides recommendations to a client through the GetRecommendations API. To train a model, Amazon Personalize requires training data and a recipe. The training data comes from the dataset group that you provide in the request. A recipe specifies the training algorithm and a feature transformation. You can specify one of the predefined recipes provided by Amazon Personalize. Alternatively, you can specify performAutoML and Amazon Personalize will analyze your data and select the optimum USER_PERSONALIZATION recipe for you. Status A solution can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the solution, call DescribeSolution. Wait until the status shows as ACTIVE before calling CreateSolutionVersion. Related APIs ListSolutions CreateSolutionVersion DescribeSolution DeleteSolution ListSolutionVersions DescribeSolutionVersion */ createSolution(params: Personalize.Types.CreateSolutionRequest, callback?: (err: AWSError, data: Personalize.Types.CreateSolutionResponse) => void): Request; /** * Creates the configuration for training a model. A trained model is known as a solution. After the configuration is created, you train the model (create a solution) by calling the CreateSolutionVersion operation. Every time you call CreateSolutionVersion, a new version of the solution is created. After creating a solution version, you check its accuracy by calling GetSolutionMetrics. When you are satisfied with the version, you deploy it using CreateCampaign. The campaign provides recommendations to a client through the GetRecommendations API. To train a model, Amazon Personalize requires training data and a recipe. The training data comes from the dataset group that you provide in the request. A recipe specifies the training algorithm and a feature transformation. You can specify one of the predefined recipes provided by Amazon Personalize. Alternatively, you can specify performAutoML and Amazon Personalize will analyze your data and select the optimum USER_PERSONALIZATION recipe for you. Status A solution can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS To get the status of the solution, call DescribeSolution. Wait until the status shows as ACTIVE before calling CreateSolutionVersion. Related APIs ListSolutions CreateSolutionVersion DescribeSolution DeleteSolution ListSolutionVersions DescribeSolutionVersion */ createSolution(callback?: (err: AWSError, data: Personalize.Types.CreateSolutionResponse) => void): Request; /** * Trains or retrains an active solution. A solution is created using the CreateSolution operation and must be in the ACTIVE state before calling CreateSolutionVersion. A new version of the solution is created every time you call this operation. Status A solution version can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED To get the status of the version, call DescribeSolutionVersion. Wait until the status shows as ACTIVE before calling CreateCampaign. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed. Related APIs ListSolutionVersions DescribeSolutionVersion ListSolutions CreateSolution DescribeSolution DeleteSolution */ createSolutionVersion(params: Personalize.Types.CreateSolutionVersionRequest, callback?: (err: AWSError, data: Personalize.Types.CreateSolutionVersionResponse) => void): Request; /** * Trains or retrains an active solution. A solution is created using the CreateSolution operation and must be in the ACTIVE state before calling CreateSolutionVersion. A new version of the solution is created every time you call this operation. Status A solution version can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED To get the status of the version, call DescribeSolutionVersion. Wait until the status shows as ACTIVE before calling CreateCampaign. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed. Related APIs ListSolutionVersions DescribeSolutionVersion ListSolutions CreateSolution DescribeSolution DeleteSolution */ createSolutionVersion(callback?: (err: AWSError, data: Personalize.Types.CreateSolutionVersionResponse) => void): Request; /** * Removes a campaign by deleting the solution deployment. The solution that the campaign is based on is not deleted and can be redeployed when needed. A deleted campaign can no longer be specified in a GetRecommendations request. For more information on campaigns, see CreateCampaign. */ deleteCampaign(params: Personalize.Types.DeleteCampaignRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Removes a campaign by deleting the solution deployment. The solution that the campaign is based on is not deleted and can be redeployed when needed. A deleted campaign can no longer be specified in a GetRecommendations request. For more information on campaigns, see CreateCampaign. */ deleteCampaign(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a dataset. You can't delete a dataset if an associated DatasetImportJob or SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on datasets, see CreateDataset. */ deleteDataset(params: Personalize.Types.DeleteDatasetRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a dataset. You can't delete a dataset if an associated DatasetImportJob or SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on datasets, see CreateDataset. */ deleteDataset(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a dataset group. Before you delete a dataset group, you must delete the following: All associated event trackers. All associated solutions. All datasets in the dataset group. */ deleteDatasetGroup(params: Personalize.Types.DeleteDatasetGroupRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a dataset group. Before you delete a dataset group, you must delete the following: All associated event trackers. All associated solutions. All datasets in the dataset group. */ deleteDatasetGroup(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the event tracker. Does not delete the event-interactions dataset from the associated dataset group. For more information on event trackers, see CreateEventTracker. */ deleteEventTracker(params: Personalize.Types.DeleteEventTrackerRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes the event tracker. Does not delete the event-interactions dataset from the associated dataset group. For more information on event trackers, see CreateEventTracker. */ deleteEventTracker(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a schema. Before deleting a schema, you must delete all datasets referencing the schema. For more information on schemas, see CreateSchema. */ deleteSchema(params: Personalize.Types.DeleteSchemaRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes a schema. Before deleting a schema, you must delete all datasets referencing the schema. For more information on schemas, see CreateSchema. */ deleteSchema(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes all versions of a solution and the Solution object itself. Before deleting a solution, you must delete all campaigns based on the solution. To determine what campaigns are using the solution, call ListCampaigns and supply the Amazon Resource Name (ARN) of the solution. You can't delete a solution if an associated SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on solutions, see CreateSolution. */ deleteSolution(params: Personalize.Types.DeleteSolutionRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Deletes all versions of a solution and the Solution object itself. Before deleting a solution, you must delete all campaigns based on the solution. To determine what campaigns are using the solution, call ListCampaigns and supply the Amazon Resource Name (ARN) of the solution. You can't delete a solution if an associated SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on solutions, see CreateSolution. */ deleteSolution(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>; /** * Describes the given algorithm. */ describeAlgorithm(params: Personalize.Types.DescribeAlgorithmRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeAlgorithmResponse) => void): Request; /** * Describes the given algorithm. */ describeAlgorithm(callback?: (err: AWSError, data: Personalize.Types.DescribeAlgorithmResponse) => void): Request; /** * Describes the given campaign, including its status. A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS When the status is CREATE FAILED, the response includes the failureReason key, which describes why. For more information on campaigns, see CreateCampaign. */ describeCampaign(params: Personalize.Types.DescribeCampaignRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeCampaignResponse) => void): Request; /** * Describes the given campaign, including its status. A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS When the status is CREATE FAILED, the response includes the failureReason key, which describes why. For more information on campaigns, see CreateCampaign. */ describeCampaign(callback?: (err: AWSError, data: Personalize.Types.DescribeCampaignResponse) => void): Request; /** * Describes the given dataset. For more information on datasets, see CreateDataset. */ describeDataset(params: Personalize.Types.DescribeDatasetRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetResponse) => void): Request; /** * Describes the given dataset. For more information on datasets, see CreateDataset. */ describeDataset(callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetResponse) => void): Request; /** * Describes the given dataset group. For more information on dataset groups, see CreateDatasetGroup. */ describeDatasetGroup(params: Personalize.Types.DescribeDatasetGroupRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetGroupResponse) => void): Request; /** * Describes the given dataset group. For more information on dataset groups, see CreateDatasetGroup. */ describeDatasetGroup(callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetGroupResponse) => void): Request; /** * Describes the dataset import job created by CreateDatasetImportJob, including the import job status. */ describeDatasetImportJob(params: Personalize.Types.DescribeDatasetImportJobRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetImportJobResponse) => void): Request; /** * Describes the dataset import job created by CreateDatasetImportJob, including the import job status. */ describeDatasetImportJob(callback?: (err: AWSError, data: Personalize.Types.DescribeDatasetImportJobResponse) => void): Request; /** * Describes an event tracker. The response includes the trackingId and status of the event tracker. For more information on event trackers, see CreateEventTracker. */ describeEventTracker(params: Personalize.Types.DescribeEventTrackerRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeEventTrackerResponse) => void): Request; /** * Describes an event tracker. The response includes the trackingId and status of the event tracker. For more information on event trackers, see CreateEventTracker. */ describeEventTracker(callback?: (err: AWSError, data: Personalize.Types.DescribeEventTrackerResponse) => void): Request; /** * Describes the given feature transformation. */ describeFeatureTransformation(params: Personalize.Types.DescribeFeatureTransformationRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeFeatureTransformationResponse) => void): Request; /** * Describes the given feature transformation. */ describeFeatureTransformation(callback?: (err: AWSError, data: Personalize.Types.DescribeFeatureTransformationResponse) => void): Request; /** * Describes a recipe. A recipe contains three items: An algorithm that trains a model. Hyperparameters that govern the training. Feature transformation information for modifying the input data before training. Amazon Personalize provides a set of predefined recipes. You specify a recipe when you create a solution with the CreateSolution API. CreateSolution trains a model by using the algorithm in the specified recipe and a training dataset. The solution, when deployed as a campaign, can provide recommendations using the GetRecommendations API. */ describeRecipe(params: Personalize.Types.DescribeRecipeRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeRecipeResponse) => void): Request; /** * Describes a recipe. A recipe contains three items: An algorithm that trains a model. Hyperparameters that govern the training. Feature transformation information for modifying the input data before training. Amazon Personalize provides a set of predefined recipes. You specify a recipe when you create a solution with the CreateSolution API. CreateSolution trains a model by using the algorithm in the specified recipe and a training dataset. The solution, when deployed as a campaign, can provide recommendations using the GetRecommendations API. */ describeRecipe(callback?: (err: AWSError, data: Personalize.Types.DescribeRecipeResponse) => void): Request; /** * Describes a schema. For more information on schemas, see CreateSchema. */ describeSchema(params: Personalize.Types.DescribeSchemaRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeSchemaResponse) => void): Request; /** * Describes a schema. For more information on schemas, see CreateSchema. */ describeSchema(callback?: (err: AWSError, data: Personalize.Types.DescribeSchemaResponse) => void): Request; /** * Describes a solution. For more information on solutions, see CreateSolution. */ describeSolution(params: Personalize.Types.DescribeSolutionRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeSolutionResponse) => void): Request; /** * Describes a solution. For more information on solutions, see CreateSolution. */ describeSolution(callback?: (err: AWSError, data: Personalize.Types.DescribeSolutionResponse) => void): Request; /** * Describes a specific version of a solution. For more information on solutions, see CreateSolution. */ describeSolutionVersion(params: Personalize.Types.DescribeSolutionVersionRequest, callback?: (err: AWSError, data: Personalize.Types.DescribeSolutionVersionResponse) => void): Request; /** * Describes a specific version of a solution. For more information on solutions, see CreateSolution. */ describeSolutionVersion(callback?: (err: AWSError, data: Personalize.Types.DescribeSolutionVersionResponse) => void): Request; /** * Gets the metrics for the specified solution version. */ getSolutionMetrics(params: Personalize.Types.GetSolutionMetricsRequest, callback?: (err: AWSError, data: Personalize.Types.GetSolutionMetricsResponse) => void): Request; /** * Gets the metrics for the specified solution version. */ getSolutionMetrics(callback?: (err: AWSError, data: Personalize.Types.GetSolutionMetricsResponse) => void): Request; /** * Returns a list of campaigns that use the given solution. When a solution is not specified, all the campaigns associated with the account are listed. The response provides the properties for each campaign, including the Amazon Resource Name (ARN). For more information on campaigns, see CreateCampaign. */ listCampaigns(params: Personalize.Types.ListCampaignsRequest, callback?: (err: AWSError, data: Personalize.Types.ListCampaignsResponse) => void): Request; /** * Returns a list of campaigns that use the given solution. When a solution is not specified, all the campaigns associated with the account are listed. The response provides the properties for each campaign, including the Amazon Resource Name (ARN). For more information on campaigns, see CreateCampaign. */ listCampaigns(callback?: (err: AWSError, data: Personalize.Types.ListCampaignsResponse) => void): Request; /** * Returns a list of dataset groups. The response provides the properties for each dataset group, including the Amazon Resource Name (ARN). For more information on dataset groups, see CreateDatasetGroup. */ listDatasetGroups(params: Personalize.Types.ListDatasetGroupsRequest, callback?: (err: AWSError, data: Personalize.Types.ListDatasetGroupsResponse) => void): Request; /** * Returns a list of dataset groups. The response provides the properties for each dataset group, including the Amazon Resource Name (ARN). For more information on dataset groups, see CreateDatasetGroup. */ listDatasetGroups(callback?: (err: AWSError, data: Personalize.Types.ListDatasetGroupsResponse) => void): Request; /** * Returns a list of dataset import jobs that use the given dataset. When a dataset is not specified, all the dataset import jobs associated with the account are listed. The response provides the properties for each dataset import job, including the Amazon Resource Name (ARN). For more information on dataset import jobs, see CreateDatasetImportJob. For more information on datasets, see CreateDataset. */ listDatasetImportJobs(params: Personalize.Types.ListDatasetImportJobsRequest, callback?: (err: AWSError, data: Personalize.Types.ListDatasetImportJobsResponse) => void): Request; /** * Returns a list of dataset import jobs that use the given dataset. When a dataset is not specified, all the dataset import jobs associated with the account are listed. The response provides the properties for each dataset import job, including the Amazon Resource Name (ARN). For more information on dataset import jobs, see CreateDatasetImportJob. For more information on datasets, see CreateDataset. */ listDatasetImportJobs(callback?: (err: AWSError, data: Personalize.Types.ListDatasetImportJobsResponse) => void): Request; /** * Returns the list of datasets contained in the given dataset group. The response provides the properties for each dataset, including the Amazon Resource Name (ARN). For more information on datasets, see CreateDataset. */ listDatasets(params: Personalize.Types.ListDatasetsRequest, callback?: (err: AWSError, data: Personalize.Types.ListDatasetsResponse) => void): Request; /** * Returns the list of datasets contained in the given dataset group. The response provides the properties for each dataset, including the Amazon Resource Name (ARN). For more information on datasets, see CreateDataset. */ listDatasets(callback?: (err: AWSError, data: Personalize.Types.ListDatasetsResponse) => void): Request; /** * Returns the list of event trackers associated with the account. The response provides the properties for each event tracker, including the Amazon Resource Name (ARN) and tracking ID. For more information on event trackers, see CreateEventTracker. */ listEventTrackers(params: Personalize.Types.ListEventTrackersRequest, callback?: (err: AWSError, data: Personalize.Types.ListEventTrackersResponse) => void): Request; /** * Returns the list of event trackers associated with the account. The response provides the properties for each event tracker, including the Amazon Resource Name (ARN) and tracking ID. For more information on event trackers, see CreateEventTracker. */ listEventTrackers(callback?: (err: AWSError, data: Personalize.Types.ListEventTrackersResponse) => void): Request; /** * Returns a list of available recipes. The response provides the properties for each recipe, including the recipe's Amazon Resource Name (ARN). */ listRecipes(params: Personalize.Types.ListRecipesRequest, callback?: (err: AWSError, data: Personalize.Types.ListRecipesResponse) => void): Request; /** * Returns a list of available recipes. The response provides the properties for each recipe, including the recipe's Amazon Resource Name (ARN). */ listRecipes(callback?: (err: AWSError, data: Personalize.Types.ListRecipesResponse) => void): Request; /** * Returns the list of schemas associated with the account. The response provides the properties for each schema, including the Amazon Resource Name (ARN). For more information on schemas, see CreateSchema. */ listSchemas(params: Personalize.Types.ListSchemasRequest, callback?: (err: AWSError, data: Personalize.Types.ListSchemasResponse) => void): Request; /** * Returns the list of schemas associated with the account. The response provides the properties for each schema, including the Amazon Resource Name (ARN). For more information on schemas, see CreateSchema. */ listSchemas(callback?: (err: AWSError, data: Personalize.Types.ListSchemasResponse) => void): Request; /** * Returns a list of solution versions for the given solution. When a solution is not specified, all the solution versions associated with the account are listed. The response provides the properties for each solution version, including the Amazon Resource Name (ARN). For more information on solutions, see CreateSolution. */ listSolutionVersions(params: Personalize.Types.ListSolutionVersionsRequest, callback?: (err: AWSError, data: Personalize.Types.ListSolutionVersionsResponse) => void): Request; /** * Returns a list of solution versions for the given solution. When a solution is not specified, all the solution versions associated with the account are listed. The response provides the properties for each solution version, including the Amazon Resource Name (ARN). For more information on solutions, see CreateSolution. */ listSolutionVersions(callback?: (err: AWSError, data: Personalize.Types.ListSolutionVersionsResponse) => void): Request; /** * Returns a list of solutions that use the given dataset group. When a dataset group is not specified, all the solutions associated with the account are listed. The response provides the properties for each solution, including the Amazon Resource Name (ARN). For more information on solutions, see CreateSolution. */ listSolutions(params: Personalize.Types.ListSolutionsRequest, callback?: (err: AWSError, data: Personalize.Types.ListSolutionsResponse) => void): Request; /** * Returns a list of solutions that use the given dataset group. When a dataset group is not specified, all the solutions associated with the account are listed. The response provides the properties for each solution, including the Amazon Resource Name (ARN). For more information on solutions, see CreateSolution. */ listSolutions(callback?: (err: AWSError, data: Personalize.Types.ListSolutionsResponse) => void): Request; /** * Updates a campaign by either deploying a new solution or changing the value of the campaign's minProvisionedTPS parameter. To update a campaign, the campaign status must be ACTIVE or CREATE FAILED. Check the campaign status using the DescribeCampaign API. You must wait until the status of the updated campaign is ACTIVE before asking the campaign for recommendations. For more information on campaigns, see CreateCampaign. */ updateCampaign(params: Personalize.Types.UpdateCampaignRequest, callback?: (err: AWSError, data: Personalize.Types.UpdateCampaignResponse) => void): Request; /** * Updates a campaign by either deploying a new solution or changing the value of the campaign's minProvisionedTPS parameter. To update a campaign, the campaign status must be ACTIVE or CREATE FAILED. Check the campaign status using the DescribeCampaign API. You must wait until the status of the updated campaign is ACTIVE before asking the campaign for recommendations. For more information on campaigns, see CreateCampaign. */ updateCampaign(callback?: (err: AWSError, data: Personalize.Types.UpdateCampaignResponse) => void): Request; } declare namespace Personalize { export type AccountId = string; export interface Algorithm { /** * The name of the algorithm. */ name?: Name; /** * The Amazon Resource Name (ARN) of the algorithm. */ algorithmArn?: Arn; /** * The URI of the Docker container for the algorithm image. */ algorithmImage?: AlgorithmImage; /** * Specifies the default hyperparameters. */ defaultHyperParameters?: HyperParameters; /** * Specifies the default hyperparameters, their ranges, and whether they are tunable. A tunable hyperparameter can have its value determined during hyperparameter optimization (HPO). */ defaultHyperParameterRanges?: DefaultHyperParameterRanges; /** * Specifies the default maximum number of training jobs and parallel training jobs. */ defaultResourceConfig?: ResourceConfig; /** * The training input mode. */ trainingInputMode?: TrainingInputMode; /** * The Amazon Resource Name (ARN) of the role. */ roleArn?: Arn; /** * The date and time (in Unix time) that the algorithm was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the algorithm was last updated. */ lastUpdatedDateTime?: _Date; } export interface AlgorithmImage { /** * The name of the algorithm image. */ name?: Name; /** * The URI of the Docker container for the algorithm image. */ dockerURI: DockerURI; } export type Arn = string; export type ArnList = Arn[]; export interface AutoMLConfig { /** * The metric to optimize. */ metricName?: MetricName; /** * The list of candidate recipes. */ recipeList?: ArnList; } export interface AutoMLResult { /** * The Amazon Resource Name (ARN) of the best recipe. */ bestRecipeArn?: Arn; } export type AvroSchema = string; export type Boolean = boolean; export interface Campaign { /** * The name of the campaign. */ name?: Name; /** * The Amazon Resource Name (ARN) of the campaign. */ campaignArn?: Arn; /** * The Amazon Resource Name (ARN) of a specific version of the solution. */ solutionVersionArn?: Arn; /** * Specifies the requested minimum provisioned transactions (recommendations) per second. */ minProvisionedTPS?: TransactionsPerSecond; /** * The status of the campaign. A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * If a campaign fails, the reason behind the failure. */ failureReason?: FailureReason; /** * The date and time (in Unix format) that the campaign was created. */ creationDateTime?: _Date; /** * The date and time (in Unix format) that the campaign was last updated. */ lastUpdatedDateTime?: _Date; latestCampaignUpdate?: CampaignUpdateSummary; } export interface CampaignSummary { /** * The name of the campaign. */ name?: Name; /** * The Amazon Resource Name (ARN) of the campaign. */ campaignArn?: Arn; /** * The status of the campaign. A campaign can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The date and time (in Unix time) that the campaign was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the campaign was last updated. */ lastUpdatedDateTime?: _Date; /** * If a campaign fails, the reason behind the failure. */ failureReason?: FailureReason; } export interface CampaignUpdateSummary { /** * The Amazon Resource Name (ARN) of the deployed solution version. */ solutionVersionArn?: Arn; /** * Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. */ minProvisionedTPS?: TransactionsPerSecond; /** * The status of the campaign update. A campaign update can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * If a campaign update fails, the reason behind the failure. */ failureReason?: FailureReason; /** * The date and time (in Unix time) that the campaign update was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the campaign update was last updated. */ lastUpdatedDateTime?: _Date; } export type Campaigns = CampaignSummary[]; export interface CategoricalHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * A list of the categories for the hyperparameter. */ values?: CategoricalValues; } export type CategoricalHyperParameterRanges = CategoricalHyperParameterRange[]; export type CategoricalValue = string; export type CategoricalValues = CategoricalValue[]; export interface ContinuousHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * The minimum allowable value for the hyperparameter. */ minValue?: ContinuousMinValue; /** * The maximum allowable value for the hyperparameter. */ maxValue?: ContinuousMaxValue; } export type ContinuousHyperParameterRanges = ContinuousHyperParameterRange[]; export type ContinuousMaxValue = number; export type ContinuousMinValue = number; export interface CreateCampaignRequest { /** * A name for the new campaign. The campaign name must be unique within your account. */ name: Name; /** * The Amazon Resource Name (ARN) of the solution version to deploy. */ solutionVersionArn: Arn; /** * Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. */ minProvisionedTPS: TransactionsPerSecond; } export interface CreateCampaignResponse { /** * The Amazon Resource Name (ARN) of the campaign. */ campaignArn?: Arn; } export interface CreateDatasetGroupRequest { /** * The name for the new dataset group. */ name: Name; /** * The ARN of the IAM role that has permissions to access the KMS key. Supplying an IAM role is only valid when also specifying a KMS key. */ roleArn?: RoleArn; /** * The Amazon Resource Name (ARN) of a KMS key used to encrypt the datasets. */ kmsKeyArn?: KmsKeyArn; } export interface CreateDatasetGroupResponse { /** * The Amazon Resource Name (ARN) of the new dataset group. */ datasetGroupArn?: Arn; } export interface CreateDatasetImportJobRequest { /** * The name for the dataset import job. */ jobName: Name; /** * The ARN of the dataset that receives the imported data. */ datasetArn: Arn; /** * The Amazon S3 bucket that contains the training data to import. */ dataSource: DataSource; /** * The ARN of the IAM role that has permissions to read from the Amazon S3 data source. */ roleArn: RoleArn; } export interface CreateDatasetImportJobResponse { /** * The ARN of the dataset import job. */ datasetImportJobArn?: Arn; } export interface CreateDatasetRequest { /** * The name for the dataset. */ name: Name; /** * The ARN of the schema to associate with the dataset. The schema defines the dataset fields. */ schemaArn: Arn; /** * The Amazon Resource Name (ARN) of the dataset group to add the dataset to. */ datasetGroupArn: Arn; /** * The type of dataset. One of the following (case insensitive) values: Interactions Items Users */ datasetType: DatasetType; } export interface CreateDatasetResponse { /** * The ARN of the dataset. */ datasetArn?: Arn; } export interface CreateEventTrackerRequest { /** * The name for the event tracker. */ name: Name; /** * The Amazon Resource Name (ARN) of the dataset group that receives the event data. */ datasetGroupArn: Arn; } export interface CreateEventTrackerResponse { /** * The ARN of the event tracker. */ eventTrackerArn?: Arn; /** * The ID of the event tracker. Include this ID in requests to the PutEvents API. */ trackingId?: TrackingId; } export interface CreateSchemaRequest { /** * The name for the schema. */ name: Name; /** * A schema in Avro JSON format. */ schema: AvroSchema; } export interface CreateSchemaResponse { /** * The Amazon Resource Name (ARN) of the created schema. */ schemaArn?: Arn; } export interface CreateSolutionRequest { /** * The name for the solution. */ name: Name; /** * Whether to perform hyperparameter optimization (HPO) on the specified or selected recipe. The default is false. When performing AutoML, this parameter is always true and you should not set it to false. */ performHPO?: Boolean; /** * Whether to perform automated machine learning (AutoML). The default is false. For this case, you must specify recipeArn. When set to true, Amazon Personalize analyzes your training data and selects the optimal USER_PERSONALIZATION recipe and hyperparameters. In this case, you must omit recipeArn. Amazon Personalize determines the optimal recipe by running tests with different values for the hyperparameters. AutoML lengthens the training process as compared to selecting a specific recipe. */ performAutoML?: PerformAutoML; /** * The ARN of the recipe to use for model training. Only specified when performAutoML is false. */ recipeArn?: Arn; /** * The Amazon Resource Name (ARN) of the dataset group that provides the training data. */ datasetGroupArn: Arn; /** * When your have multiple event types (using an EVENT_TYPE schema field), this parameter specifies which event type (for example, 'click' or 'like') is used for training the model. */ eventType?: EventType; /** * The configuration to use with the solution. When performAutoML is set to true, Amazon Personalize only evaluates the autoMLConfig section of the solution configuration. */ solutionConfig?: SolutionConfig; } export interface CreateSolutionResponse { /** * The ARN of the solution. */ solutionArn?: Arn; } export interface CreateSolutionVersionRequest { /** * The Amazon Resource Name (ARN) of the solution containing the training configuration information. */ solutionArn: Arn; /** * The scope of training to be performed when creating the solution version. The FULL option trains the solution version based on the entirety of the input solution's training data, while the UPDATE option processes only the data that has changed in comparison to the input solution. Choose UPDATE when you want to incrementally update your solution version instead of creating an entirely new one. The UPDATE option can only be used when you already have an active solution version created from the input solution using the FULL option and the input solution was trained with the native-recipe-hrnn-coldstart recipe. */ trainingMode?: TrainingMode; } export interface CreateSolutionVersionResponse { /** * The ARN of the new solution version. */ solutionVersionArn?: Arn; } export interface DataSource { /** * The path to the Amazon S3 bucket where the data that you want to upload to your dataset is stored. For example: s3://bucket-name/training-data.csv */ dataLocation?: S3Location; } export interface Dataset { /** * The name of the dataset. */ name?: Name; /** * The Amazon Resource Name (ARN) of the dataset that you want metadata for. */ datasetArn?: Arn; /** * The Amazon Resource Name (ARN) of the dataset group. */ datasetGroupArn?: Arn; /** * One of the following values: Interactions Items Users */ datasetType?: DatasetType; /** * The ARN of the associated schema. */ schemaArn?: Arn; /** * The status of the dataset. A dataset can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The creation date and time (in Unix time) of the dataset. */ creationDateTime?: _Date; /** * A time stamp that shows when the dataset was updated. */ lastUpdatedDateTime?: _Date; } export interface DatasetGroup { /** * The name of the dataset group. */ name?: Name; /** * The Amazon Resource Name (ARN) of the dataset group. */ datasetGroupArn?: Arn; /** * The current status of the dataset group. A dataset group can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING */ status?: Status; /** * The ARN of the IAM role that has permissions to create the dataset group. */ roleArn?: RoleArn; /** * The Amazon Resource Name (ARN) of the KMS key used to encrypt the datasets. */ kmsKeyArn?: KmsKeyArn; /** * The creation date and time (in Unix time) of the dataset group. */ creationDateTime?: _Date; /** * The last update date and time (in Unix time) of the dataset group. */ lastUpdatedDateTime?: _Date; /** * If creating a dataset group fails, provides the reason why. */ failureReason?: FailureReason; } export interface DatasetGroupSummary { /** * The name of the dataset group. */ name?: Name; /** * The Amazon Resource Name (ARN) of the dataset group. */ datasetGroupArn?: Arn; /** * The status of the dataset group. A dataset group can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING */ status?: Status; /** * The date and time (in Unix time) that the dataset group was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the dataset group was last updated. */ lastUpdatedDateTime?: _Date; /** * If creating a dataset group fails, the reason behind the failure. */ failureReason?: FailureReason; } export type DatasetGroups = DatasetGroupSummary[]; export interface DatasetImportJob { /** * The name of the import job. */ jobName?: Name; /** * The ARN of the dataset import job. */ datasetImportJobArn?: Arn; /** * The Amazon Resource Name (ARN) of the dataset that receives the imported data. */ datasetArn?: Arn; /** * The Amazon S3 bucket that contains the training data to import. */ dataSource?: DataSource; /** * The ARN of the AWS Identity and Access Management (IAM) role that has permissions to read from the Amazon S3 data source. */ roleArn?: Arn; /** * The status of the dataset import job. A dataset import job can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED */ status?: Status; /** * The creation date and time (in Unix time) of the dataset import job. */ creationDateTime?: _Date; /** * The date and time (in Unix time) the dataset was last updated. */ lastUpdatedDateTime?: _Date; /** * If a dataset import job fails, provides the reason why. */ failureReason?: FailureReason; } export interface DatasetImportJobSummary { /** * The Amazon Resource Name (ARN) of the dataset import job. */ datasetImportJobArn?: Arn; /** * The name of the dataset import job. */ jobName?: Name; /** * The status of the dataset import job. A dataset import job can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED */ status?: Status; /** * The date and time (in Unix time) that the dataset import job was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the dataset was last updated. */ lastUpdatedDateTime?: _Date; /** * If a dataset import job fails, the reason behind the failure. */ failureReason?: FailureReason; } export type DatasetImportJobs = DatasetImportJobSummary[]; export interface DatasetSchema { /** * The name of the schema. */ name?: Name; /** * The Amazon Resource Name (ARN) of the schema. */ schemaArn?: Arn; /** * The schema. */ schema?: AvroSchema; /** * The date and time (in Unix time) that the schema was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the schema was last updated. */ lastUpdatedDateTime?: _Date; } export interface DatasetSchemaSummary { /** * The name of the schema. */ name?: Name; /** * The Amazon Resource Name (ARN) of the schema. */ schemaArn?: Arn; /** * The date and time (in Unix time) that the schema was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the schema was last updated. */ lastUpdatedDateTime?: _Date; } export interface DatasetSummary { /** * The name of the dataset. */ name?: Name; /** * The Amazon Resource Name (ARN) of the dataset. */ datasetArn?: Arn; /** * The dataset type. One of the following values: Interactions Items Users Event-Interactions */ datasetType?: DatasetType; /** * The status of the dataset. A dataset can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The date and time (in Unix time) that the dataset was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the dataset was last updated. */ lastUpdatedDateTime?: _Date; } export type DatasetType = string; export type Datasets = DatasetSummary[]; export type _Date = Date; export interface DefaultCategoricalHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * A list of the categories for the hyperparameter. */ values?: CategoricalValues; /** * Whether the hyperparameter is tunable. */ isTunable?: Tunable; } export type DefaultCategoricalHyperParameterRanges = DefaultCategoricalHyperParameterRange[]; export interface DefaultContinuousHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * The minimum allowable value for the hyperparameter. */ minValue?: ContinuousMinValue; /** * The maximum allowable value for the hyperparameter. */ maxValue?: ContinuousMaxValue; /** * Whether the hyperparameter is tunable. */ isTunable?: Tunable; } export type DefaultContinuousHyperParameterRanges = DefaultContinuousHyperParameterRange[]; export interface DefaultHyperParameterRanges { /** * The integer-valued hyperparameters and their default ranges. */ integerHyperParameterRanges?: DefaultIntegerHyperParameterRanges; /** * The continuous hyperparameters and their default ranges. */ continuousHyperParameterRanges?: DefaultContinuousHyperParameterRanges; /** * The categorical hyperparameters and their default ranges. */ categoricalHyperParameterRanges?: DefaultCategoricalHyperParameterRanges; } export interface DefaultIntegerHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * The minimum allowable value for the hyperparameter. */ minValue?: IntegerMinValue; /** * The maximum allowable value for the hyperparameter. */ maxValue?: IntegerMaxValue; /** * Indicates whether the hyperparameter is tunable. */ isTunable?: Tunable; } export type DefaultIntegerHyperParameterRanges = DefaultIntegerHyperParameterRange[]; export interface DeleteCampaignRequest { /** * The Amazon Resource Name (ARN) of the campaign to delete. */ campaignArn: Arn; } export interface DeleteDatasetGroupRequest { /** * The ARN of the dataset group to delete. */ datasetGroupArn: Arn; } export interface DeleteDatasetRequest { /** * The Amazon Resource Name (ARN) of the dataset to delete. */ datasetArn: Arn; } export interface DeleteEventTrackerRequest { /** * The Amazon Resource Name (ARN) of the event tracker to delete. */ eventTrackerArn: Arn; } export interface DeleteSchemaRequest { /** * The Amazon Resource Name (ARN) of the schema to delete. */ schemaArn: Arn; } export interface DeleteSolutionRequest { /** * The ARN of the solution to delete. */ solutionArn: Arn; } export interface DescribeAlgorithmRequest { /** * The Amazon Resource Name (ARN) of the algorithm to describe. */ algorithmArn: Arn; } export interface DescribeAlgorithmResponse { /** * A listing of the properties of the algorithm. */ algorithm?: Algorithm; } export interface DescribeCampaignRequest { /** * The Amazon Resource Name (ARN) of the campaign. */ campaignArn: Arn; } export interface DescribeCampaignResponse { /** * The properties of the campaign. */ campaign?: Campaign; } export interface DescribeDatasetGroupRequest { /** * The Amazon Resource Name (ARN) of the dataset group to describe. */ datasetGroupArn: Arn; } export interface DescribeDatasetGroupResponse { /** * A listing of the dataset group's properties. */ datasetGroup?: DatasetGroup; } export interface DescribeDatasetImportJobRequest { /** * The Amazon Resource Name (ARN) of the dataset import job to describe. */ datasetImportJobArn: Arn; } export interface DescribeDatasetImportJobResponse { /** * Information about the dataset import job, including the status. The status is one of the following values: CREATE PENDING CREATE IN_PROGRESS ACTIVE CREATE FAILED */ datasetImportJob?: DatasetImportJob; } export interface DescribeDatasetRequest { /** * The Amazon Resource Name (ARN) of the dataset to describe. */ datasetArn: Arn; } export interface DescribeDatasetResponse { /** * A listing of the dataset's properties. */ dataset?: Dataset; } export interface DescribeEventTrackerRequest { /** * The Amazon Resource Name (ARN) of the event tracker to describe. */ eventTrackerArn: Arn; } export interface DescribeEventTrackerResponse { /** * An object that describes the event tracker. */ eventTracker?: EventTracker; } export interface DescribeFeatureTransformationRequest { /** * The Amazon Resource Name (ARN) of the feature transformation to describe. */ featureTransformationArn: Arn; } export interface DescribeFeatureTransformationResponse { /** * A listing of the FeatureTransformation properties. */ featureTransformation?: FeatureTransformation; } export interface DescribeRecipeRequest { /** * The Amazon Resource Name (ARN) of the recipe to describe. */ recipeArn: Arn; } export interface DescribeRecipeResponse { /** * An object that describes the recipe. */ recipe?: Recipe; } export interface DescribeSchemaRequest { /** * The Amazon Resource Name (ARN) of the schema to retrieve. */ schemaArn: Arn; } export interface DescribeSchemaResponse { /** * The requested schema. */ schema?: DatasetSchema; } export interface DescribeSolutionRequest { /** * The Amazon Resource Name (ARN) of the solution to describe. */ solutionArn: Arn; } export interface DescribeSolutionResponse { /** * An object that describes the solution. */ solution?: Solution; } export interface DescribeSolutionVersionRequest { /** * The Amazon Resource Name (ARN) of the solution version. */ solutionVersionArn: Arn; } export interface DescribeSolutionVersionResponse { /** * The solution version. */ solutionVersion?: SolutionVersion; } export type Description = string; export type DockerURI = string; export interface EventTracker { /** * The name of the event tracker. */ name?: Name; /** * The ARN of the event tracker. */ eventTrackerArn?: Arn; /** * The Amazon AWS account that owns the event tracker. */ accountId?: AccountId; /** * The ID of the event tracker. Include this ID in requests to the PutEvents API. */ trackingId?: TrackingId; /** * The Amazon Resource Name (ARN) of the dataset group that receives the event data. */ datasetGroupArn?: Arn; /** * The status of the event tracker. An event tracker can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The date and time (in Unix format) that the event tracker was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the event tracker was last updated. */ lastUpdatedDateTime?: _Date; } export interface EventTrackerSummary { /** * The name of the event tracker. */ name?: Name; /** * The Amazon Resource Name (ARN) of the event tracker. */ eventTrackerArn?: Arn; /** * The status of the event tracker. An event tracker can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The date and time (in Unix time) that the event tracker was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the event tracker was last updated. */ lastUpdatedDateTime?: _Date; } export type EventTrackers = EventTrackerSummary[]; export type EventType = string; export type EventValueThreshold = string; export type FailureReason = string; export interface FeatureTransformation { /** * The name of the feature transformation. */ name?: Name; /** * The Amazon Resource Name (ARN) of the FeatureTransformation object. */ featureTransformationArn?: Arn; /** * Provides the default parameters for feature transformation. */ defaultParameters?: FeaturizationParameters; /** * The creation date and time (in Unix time) of the feature transformation. */ creationDateTime?: _Date; /** * The last update date and time (in Unix time) of the feature transformation. */ lastUpdatedDateTime?: _Date; /** * The status of the feature transformation. A feature transformation can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED */ status?: Status; } export type FeatureTransformationParameters = {[key: string]: ParameterValue}; export type FeaturizationParameters = {[key: string]: ParameterValue}; export interface GetSolutionMetricsRequest { /** * The Amazon Resource Name (ARN) of the solution version for which to get metrics. */ solutionVersionArn: Arn; } export interface GetSolutionMetricsResponse { /** * The same solution version ARN as specified in the request. */ solutionVersionArn?: Arn; /** * The metrics for the solution version. */ metrics?: Metrics; } export interface HPOConfig { /** * The metric to optimize during HPO. */ hpoObjective?: HPOObjective; /** * Describes the resource configuration for HPO. */ hpoResourceConfig?: HPOResourceConfig; /** * The hyperparameters and their allowable ranges. */ algorithmHyperParameterRanges?: HyperParameterRanges; } export interface HPOObjective { /** * The data type of the metric. */ type?: HPOObjectiveType; /** * The name of the metric. */ metricName?: MetricName; /** * A regular expression for finding the metric in the training job logs. */ metricRegex?: MetricRegex; } export type HPOObjectiveType = string; export type HPOResource = string; export interface HPOResourceConfig { /** * The maximum number of training jobs when you create a solution version. The maximum value for maxNumberOfTrainingJobs is 40. */ maxNumberOfTrainingJobs?: HPOResource; /** * The maximum number of parallel training jobs when you create a solution version. The maximum value for maxParallelTrainingJobs is 10. */ maxParallelTrainingJobs?: HPOResource; } export interface HyperParameterRanges { /** * The integer-valued hyperparameters and their ranges. */ integerHyperParameterRanges?: IntegerHyperParameterRanges; /** * The continuous hyperparameters and their ranges. */ continuousHyperParameterRanges?: ContinuousHyperParameterRanges; /** * The categorical hyperparameters and their ranges. */ categoricalHyperParameterRanges?: CategoricalHyperParameterRanges; } export type HyperParameters = {[key: string]: ParameterValue}; export interface IntegerHyperParameterRange { /** * The name of the hyperparameter. */ name?: ParameterName; /** * The minimum allowable value for the hyperparameter. */ minValue?: IntegerMinValue; /** * The maximum allowable value for the hyperparameter. */ maxValue?: IntegerMaxValue; } export type IntegerHyperParameterRanges = IntegerHyperParameterRange[]; export type IntegerMaxValue = number; export type IntegerMinValue = number; export type KmsKeyArn = string; export interface ListCampaignsRequest { /** * The Amazon Resource Name (ARN) of the solution to list the campaigns for. When a solution is not specified, all the campaigns associated with the account are listed. */ solutionArn?: Arn; /** * A token returned from the previous call to ListCampaigns for getting the next set of campaigns (if they exist). */ nextToken?: NextToken; /** * The maximum number of campaigns to return. */ maxResults?: MaxResults; } export interface ListCampaignsResponse { /** * A list of the campaigns. */ campaigns?: Campaigns; /** * A token for getting the next set of campaigns (if they exist). */ nextToken?: NextToken; } export interface ListDatasetGroupsRequest { /** * A token returned from the previous call to ListDatasetGroups for getting the next set of dataset groups (if they exist). */ nextToken?: NextToken; /** * The maximum number of dataset groups to return. */ maxResults?: MaxResults; } export interface ListDatasetGroupsResponse { /** * The list of your dataset groups. */ datasetGroups?: DatasetGroups; /** * A token for getting the next set of dataset groups (if they exist). */ nextToken?: NextToken; } export interface ListDatasetImportJobsRequest { /** * The Amazon Resource Name (ARN) of the dataset to list the dataset import jobs for. */ datasetArn?: Arn; /** * A token returned from the previous call to ListDatasetImportJobs for getting the next set of dataset import jobs (if they exist). */ nextToken?: NextToken; /** * The maximum number of dataset import jobs to return. */ maxResults?: MaxResults; } export interface ListDatasetImportJobsResponse { /** * The list of dataset import jobs. */ datasetImportJobs?: DatasetImportJobs; /** * A token for getting the next set of dataset import jobs (if they exist). */ nextToken?: NextToken; } export interface ListDatasetsRequest { /** * The Amazon Resource Name (ARN) of the dataset group that contains the datasets to list. */ datasetGroupArn?: Arn; /** * A token returned from the previous call to ListDatasetImportJobs for getting the next set of dataset import jobs (if they exist). */ nextToken?: NextToken; /** * The maximum number of datasets to return. */ maxResults?: MaxResults; } export interface ListDatasetsResponse { /** * An array of Dataset objects. Each object provides metadata information. */ datasets?: Datasets; /** * A token for getting the next set of datasets (if they exist). */ nextToken?: NextToken; } export interface ListEventTrackersRequest { /** * The ARN of a dataset group used to filter the response. */ datasetGroupArn?: Arn; /** * A token returned from the previous call to ListEventTrackers for getting the next set of event trackers (if they exist). */ nextToken?: NextToken; /** * The maximum number of event trackers to return. */ maxResults?: MaxResults; } export interface ListEventTrackersResponse { /** * A list of event trackers. */ eventTrackers?: EventTrackers; /** * A token for getting the next set of event trackers (if they exist). */ nextToken?: NextToken; } export interface ListRecipesRequest { /** * The default is SERVICE. */ recipeProvider?: RecipeProvider; /** * A token returned from the previous call to ListRecipes for getting the next set of recipes (if they exist). */ nextToken?: NextToken; /** * The maximum number of recipes to return. */ maxResults?: MaxResults; } export interface ListRecipesResponse { /** * The list of available recipes. */ recipes?: Recipes; /** * A token for getting the next set of recipes. */ nextToken?: NextToken; } export interface ListSchemasRequest { /** * A token returned from the previous call to ListSchemas for getting the next set of schemas (if they exist). */ nextToken?: NextToken; /** * The maximum number of schemas to return. */ maxResults?: MaxResults; } export interface ListSchemasResponse { /** * A list of schemas. */ schemas?: Schemas; /** * A token used to get the next set of schemas (if they exist). */ nextToken?: NextToken; } export interface ListSolutionVersionsRequest { /** * The Amazon Resource Name (ARN) of the solution. */ solutionArn?: Arn; /** * A token returned from the previous call to ListSolutionVersions for getting the next set of solution versions (if they exist). */ nextToken?: NextToken; /** * The maximum number of solution versions to return. */ maxResults?: MaxResults; } export interface ListSolutionVersionsResponse { /** * A list of solution versions describing the version properties. */ solutionVersions?: SolutionVersions; /** * A token for getting the next set of solution versions (if they exist). */ nextToken?: NextToken; } export interface ListSolutionsRequest { /** * The Amazon Resource Name (ARN) of the dataset group. */ datasetGroupArn?: Arn; /** * A token returned from the previous call to ListSolutions for getting the next set of solutions (if they exist). */ nextToken?: NextToken; /** * The maximum number of solutions to return. */ maxResults?: MaxResults; } export interface ListSolutionsResponse { /** * A list of the current solutions. */ solutions?: Solutions; /** * A token for getting the next set of solutions (if they exist). */ nextToken?: NextToken; } export type MaxResults = number; export type MetricName = string; export type MetricRegex = string; export type MetricValue = number; export type Metrics = {[key: string]: MetricValue}; export type Name = string; export type NextToken = string; export type ParameterName = string; export type ParameterValue = string; export type PerformAutoML = boolean; export type PerformHPO = boolean; export interface Recipe { /** * The name of the recipe. */ name?: Name; /** * The Amazon Resource Name (ARN) of the recipe. */ recipeArn?: Arn; /** * The Amazon Resource Name (ARN) of the algorithm that Amazon Personalize uses to train the model. */ algorithmArn?: Arn; /** * The ARN of the FeatureTransformation object. */ featureTransformationArn?: Arn; /** * The status of the recipe. */ status?: Status; /** * The description of the recipe. */ description?: Description; /** * The date and time (in Unix format) that the recipe was created. */ creationDateTime?: _Date; /** * One of the following values: PERSONALIZED_RANKING RELATED_ITEMS USER_PERSONALIZATION */ recipeType?: RecipeType; /** * The date and time (in Unix format) that the recipe was last updated. */ lastUpdatedDateTime?: _Date; } export type RecipeProvider = "SERVICE"|string; export interface RecipeSummary { /** * The name of the recipe. */ name?: Name; /** * The Amazon Resource Name (ARN) of the recipe. */ recipeArn?: Arn; /** * The status of the recipe. */ status?: Status; /** * The date and time (in Unix time) that the recipe was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the recipe was last updated. */ lastUpdatedDateTime?: _Date; } export type RecipeType = string; export type Recipes = RecipeSummary[]; export type ResourceConfig = {[key: string]: ParameterValue}; export type RoleArn = string; export type S3Location = string; export type Schemas = DatasetSchemaSummary[]; export interface Solution { /** * The name of the solution. */ name?: Name; /** * The ARN of the solution. */ solutionArn?: Arn; /** * Whether to perform hyperparameter optimization (HPO) on the chosen recipe. The default is false. */ performHPO?: PerformHPO; /** * When true, Amazon Personalize performs a search for the best USER_PERSONALIZATION recipe from the list specified in the solution configuration (recipeArn must not be specified). When false (the default), Amazon Personalize uses recipeArn for training. */ performAutoML?: PerformAutoML; /** * The ARN of the recipe used to create the solution. */ recipeArn?: Arn; /** * The Amazon Resource Name (ARN) of the dataset group that provides the training data. */ datasetGroupArn?: Arn; /** * The event type (for example, 'click' or 'like') that is used for training the model. */ eventType?: EventType; /** * Describes the configuration properties for the solution. */ solutionConfig?: SolutionConfig; /** * When performAutoML is true, specifies the best recipe found. */ autoMLResult?: AutoMLResult; /** * The status of the solution. A solution can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The creation date and time (in Unix time) of the solution. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the solution was last updated. */ lastUpdatedDateTime?: _Date; /** * Describes the latest version of the solution, including the status and the ARN. */ latestSolutionVersion?: SolutionVersionSummary; } export interface SolutionConfig { /** * Only events with a value greater than or equal to this threshold are used for training a model. */ eventValueThreshold?: EventValueThreshold; /** * Describes the properties for hyperparameter optimization (HPO). For use with the bring-your-own-recipe feature. Not used with Amazon Personalize predefined recipes. */ hpoConfig?: HPOConfig; /** * Lists the hyperparameter names and ranges. */ algorithmHyperParameters?: HyperParameters; /** * Lists the feature transformation parameters. */ featureTransformationParameters?: FeatureTransformationParameters; /** * The AutoMLConfig object containing a list of recipes to search when AutoML is performed. */ autoMLConfig?: AutoMLConfig; } export interface SolutionSummary { /** * The name of the solution. */ name?: Name; /** * The Amazon Resource Name (ARN) of the solution. */ solutionArn?: Arn; /** * The status of the solution. A solution can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED DELETE PENDING > DELETE IN_PROGRESS */ status?: Status; /** * The date and time (in Unix time) that the solution was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the solution was last updated. */ lastUpdatedDateTime?: _Date; } export interface SolutionVersion { /** * The ARN of the solution version. */ solutionVersionArn?: Arn; /** * The ARN of the solution. */ solutionArn?: Arn; /** * Whether to perform hyperparameter optimization (HPO) on the chosen recipe. The default is false. */ performHPO?: PerformHPO; /** * When true, Amazon Personalize searches for the most optimal recipe according to the solution configuration. When false (the default), Amazon Personalize uses recipeArn. */ performAutoML?: PerformAutoML; /** * The ARN of the recipe used in the solution. */ recipeArn?: Arn; /** * The event type (for example, 'click' or 'like') that is used for training the model. */ eventType?: EventType; /** * The Amazon Resource Name (ARN) of the dataset group providing the training data. */ datasetGroupArn?: Arn; /** * Describes the configuration properties for the solution. */ solutionConfig?: SolutionConfig; /** * The time used to train the model. You are billed for the time it takes to train a model. This field is visible only after Amazon Personalize successfully trains a model. */ trainingHours?: TrainingHours; /** * The scope of training used to create the solution version. The FULL option trains the solution version based on the entirety of the input solution's training data, while the UPDATE option processes only the training data that has changed since the creation of the last solution version. Choose UPDATE when you want to start recommending items added to the dataset without retraining the model. The UPDATE option can only be used after you've created a solution version with the FULL option and the training solution uses the native-recipe-hrnn-coldstart. */ trainingMode?: TrainingMode; /** * The status of the solution version. A solution version can be in one of the following states: CREATE PENDING CREATE IN_PROGRESS ACTIVE CREATE FAILED */ status?: Status; /** * If training a solution version fails, the reason for the failure. */ failureReason?: FailureReason; /** * The date and time (in Unix time) that this version of the solution was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the solution was last updated. */ lastUpdatedDateTime?: _Date; } export interface SolutionVersionSummary { /** * The Amazon Resource Name (ARN) of the solution version. */ solutionVersionArn?: Arn; /** * The status of the solution version. A solution version can be in one of the following states: CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED */ status?: Status; /** * The date and time (in Unix time) that this version of a solution was created. */ creationDateTime?: _Date; /** * The date and time (in Unix time) that the solution version was last updated. */ lastUpdatedDateTime?: _Date; /** * If a solution version fails, the reason behind the failure. */ failureReason?: FailureReason; } export type SolutionVersions = SolutionVersionSummary[]; export type Solutions = SolutionSummary[]; export type Status = string; export type TrackingId = string; export type TrainingHours = number; export type TrainingInputMode = string; export type TrainingMode = "FULL"|"UPDATE"|string; export type TransactionsPerSecond = number; export type Tunable = boolean; export interface UpdateCampaignRequest { /** * The Amazon Resource Name (ARN) of the campaign. */ campaignArn: Arn; /** * The ARN of a new solution version to deploy. */ solutionVersionArn?: Arn; /** * Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. */ minProvisionedTPS?: TransactionsPerSecond; } export interface UpdateCampaignResponse { /** * The same campaign ARN as given in the request. */ campaignArn?: Arn; } /** * A string in YYYY-MM-DD format that represents the latest possible API version that can be used in this service. Specify 'latest' to use the latest possible version. */ export type apiVersion = "2018-05-22"|"latest"|string; export interface ClientApiVersions { /** * A string in YYYY-MM-DD format that represents the latest possible API version that can be used in this service. Specify 'latest' to use the latest possible version. */ apiVersion?: apiVersion; } export type ClientConfiguration = ServiceConfigurationOptions & ClientApiVersions; /** * Contains interfaces for use with the Personalize client. */ export import Types = Personalize; } export = Personalize;