mongodb

2.2.20 2017-01-11 ----------------- - Updated mongodb-core to 2.1.5 to include bson 1.0.4 and bson-ext 1.0.4 due to Buffer.from being broken in early node 4.x versions. 2.2.19 2017-01-03 ----------------- - Corrupted Npm release fix. 2.2.18 2017-01-03 ----------------- - Updated mongodb-core to 2.1.4 to fix bson ObjectId toString issue with utils.inspect messing with toString parameters in node 6. 2.2.17 2017-01-02 ----------------- * updated createCollection doc options and linked to create command. * Updated mongodb-core to 2.1.3. * Monitoring operations are re-scheduled in pool if it cannot find a connection that does not already have scheduled work on it, this is to avoid the monitoring socket timeout being applied to any existing operations on the socket due to pipelining * Moved replicaset monitoring away from serial mode and to parallel mode. * updated bson and bson-ext dependencies to 1.0.2. 2.2.16 2016-12-13 ----------------- * NODE-899 reversed upsertedId change to bring back old behavior. 2.2.15 2016-12-10 ----------------- * Updated mongodb-core to 2.1.2. * Delay topologyMonitoring on successful attemptReconnect as no need to run a full scan immediately. * Emit reconnect event in primary joining when in connected status for a replicaset (Fixes mongoose reconnect issue). 2.2.14 2016-12-08 ----------------- * Updated mongodb-core to 2.1.1. * NODE-892 Passthrough options.readPreference to mongodb-core ReplSet instance. 2.2.13 2016-12-05 ----------------- * Updated mongodb-core to 2.1.0. * NODE-889 Fixed issue where legacy killcursor wire protocol messages would not be sent when APM is enabled. * Expose parserType as property on topology objects. 2.2.12 2016-11-29 ----------------- * Updated mongodb-core to 2.0.14. * Updated bson library to 0.5.7. * Dont leak connection.workItems elments when killCursor is called (Issue #150, https://github.com/mdlavin). * Remove unnecessary errors formatting (Issue #149, https://github.com/akryvomaz). * Only check isConnected against availableConnections (Issue #142). * NODE-838 Provide better error message on failed to connect on first retry for Mongos topology. * Set default servername to host is not passed through for sni. * Made monitoring happen on exclusive connection and using connectionTimeout to handle the wait time before failure (Issue #148). * NODE-859 Make minimum value of maxStalenessSeconds 90 seconds. * NODE-852 Fix Kerberos module deprecations on linux and windows and release new kerberos version. * NODE-850 Update Max Staleness implementation. * NODE-849 username no longer required for MONGODB-X509 auth. * NODE-848 BSON Regex flags must be alphabetically ordered. * NODE-846 Create notice for all third party libraries. * NODE-843 Executing bulk operations overwrites write concern parameter. * NODE-842 Re-sync SDAM and SDAM Monitoring tests from Specs repo. * NODE-840 Resync CRUD spec tests. * Unescapable while(true) loop (Issue #152). * NODE-864 close event not emits during network issues using single server topology. * Introduced maxStalenessSeconds. * NODE-840 Added CRUD specification test cases and fix minor issues with upserts reporting matchedCount > 0. * Don't ignore Db-level authSource when using auth method. (https://github.com/donaldguy). 2.2.11 2016-10-21 ----------------- * Updated mongodb-core to 2.0.13. - Fire callback when topology was destroyed (Issue #147, https://github.com/vkarpov15). - Refactoring to support pipelining ala 1.4.x branch will retaining the benefits of the growing/shrinking pool (Issue #146). - Fix typo in serverHeartbeatFailed event name (Issue #143, https://github.com/jakesjews). - NODE-798 Driver hangs on count command in replica set with one member (Issue #141, https://github.com/isayme). * Updated bson library to 0.5.6. - Included cyclic dependency detection * Fix typo in serverHeartbeatFailed event name (Issue #1418, https://github.com/jakesjews). * NODE-824, readPreference "nearest" does not work when specified at collection level. * NODE-822, GridFSBucketWriteStream end method does not handle optional parameters. * NODE-823, GridFSBucketWriteStream end: callback is invoked with invalid parameters. * NODE-829, Using Start/End offset option in GridFSBucketReadStream doesn't return the right sized buffer. 2.2.10 2016-09-15 ----------------- * Updated mongodb-core to 2.0.12. * fix debug logging message not printing server name. * fixed application metadata being sent by wrong ismaster. * NODE-812 Fixed mongos stall due to proxy monitoring ismaster failure causing reconnect. * NODE-818 Replicaset timeouts in initial connect sequence can "no primary found". * Updated bson library to 0.5.5. * Added DBPointer up conversion to DBRef. * MongoDB 3.4-RC Pass **appname** through MongoClient.connect uri or options to allow metadata to be passed. * MongoDB 3.4-RC Pass collation options on update, findOne, find, createIndex, aggregate. * MongoDB 3.4-RC Allow write concerns to be passed to all supporting server commands. * MongoDB 3.4-RC Allow passing of **servername** as SSL options to support SNI. 2.2.9 2016-08-29 ---------------- * Updated mongodb-core to 2.0.11. * NODE-803, Fixed issue in how the latency window is calculated for Mongos topology causing issues for single proxy connections. * Avoid timeout in attemptReconnect causing multiple attemptReconnect attempts to happen (Issue #134, https://github.com/dead-horse). * Ensure promoteBuffers is propegated in same fashion as promoteValues and promoteLongs. * Don't treat ObjectId as object for mapReduce scope (Issue #1397, https://github.com/vkarpov15). 2.2.8 2016-08-23 ---------------- * Updated mongodb-core to 2.0.10. * Added promoteValues flag (default to true) to allow user to specify they only want wrapped BSON values back instead of promotion to native types. * Do not close mongos proxy connection on failed ismaster check in ha process (Issue #130). 2.2.7 2016-08-19 ---------------- * If only a single mongos is provided in the seedlist, fix issue where it would be assigned as single standalone server instead of mongos topology (Issue #130). * Updated mongodb-core to 2.0.9. * Allow promoteLongs to be passed in through Response.parse method and overrides default set on the connection. * NODE-798 Driver hangs on count command in replica set with one member. * Allow promoteLongs to be passed in through Response.parse method and overrides default set on the connection. * Allow passing in servername for TLS connections for SNI support. 2.2.6 2016-08-16 ---------------- * Updated mongodb-core to 2.0.8. * Allow execution of store operations independent of having both a primary and secondary available (Issue #123). * Fixed command execution issue for mongos to ensure buffering of commands when no mongos available. * Allow passing in an array of tags to ReadPreference constructor (Issue #1382, https://github.com/vkarpov15) * Added hashed connection names and fullResult. * Updated bson library to 0.5.3. * Enable maxTimeMS in count, distinct, findAndModify. 2.2.5 2016-07-28 ---------------- * Updated mongodb-core to 2.0.7. * Allow primary to be returned when secondaryPreferred is passed (Issue #117, https://github.com/dhendo). * Added better warnings when passing in illegal seed list members to a Mongos topology. * Minor attemptReconnect bug that would cause multiple attemptReconnect to run in parallel. * Fix wrong opType passed to disconnectHandler.add (Issue #121, https://github.com/adrian-gierakowski) * Implemented domain backward comp support enabled via domainsEnabled options on Server/ReplSet/Mongos and MongoClient.connect. 2.2.4 2016-07-19 ---------------- * NPM corrupted upload fix. 2.2.3 2016-07-19 ---------------- * Updated mongodb-core to 2.0.6. * Destroy connection on socket timeout due to newer node versions not closing the socket. 2.2.2 2016-07-15 ---------------- * Updated mongodb-core to 2.0.5. * Minor fixes to handle faster MongoClient connectivity from the driver, allowing single server instances to detect if they are a proxy. * Added numberOfConsecutiveTimeouts to pool that will destroy the pool if the number of consecutive timeouts > reconnectTries. * Print warning if seedlist servers host name does not match the one provided in it's ismaster.me field for Replicaset members. * Fix issue where Replicaset connection would not succeeed if there the replicaset was a single primary server setup. 2.2.1 2016-07-11 ---------------- * Updated mongodb-core to 2.0.4. * handle situation where user is providing seedlist names that do not match host list. fix allows for a single full discovery connection sweep before erroring out. * NODE-747 Polyfill for Object.assign for 0.12.x or 0.10.x. * NODE-746 Improves replicaset errors for wrong setName. 2.2.0 2016-07-05 ---------------- * Updated mongodb-core to 2.0.3. * Moved all authentication and handling of growing/shrinking of pool connections into actual pool. * All authentication methods now handle both auth/reauthenticate and logout events. * Introduced logout method to get rid of onAll option for logout command. * Updated bson to 0.5.0 that includes Decimal128 support. * Fixed logger error serialization issue. * Documentation fixes. * Implemented Server Selection Specification test suite. * Added warning level to logger. * Added warning message when sockeTimeout < haInterval for Replset/Mongos. * Mongos emits close event on no proxies available or when reconnect attempt fails. * Replset emits close event when no servers available or when attemptReconnect fails to reconnect. * Don't throw in auth methods but return error in callback. 2.1.21 2016-05-30 ----------------- * Updated mongodb-core to 1.3.21. * Pool gets stuck if a connection marked for immediateRelease times out (Issue #99, https://github.com/nbrachet). * Make authentication process retry up to authenticationRetries at authenticationRetryIntervalMS interval. * Made ismaster replicaset calls operate with connectTimeout or monitorSocketTimeout to lower impact of big socketTimeouts on monitoring performance. * Make sure connections mark as "immediateRelease" don't linger the inUserConnections list. Otherwise, after that connection times out, getAll() incorrectly returns more connections than are effectively present, causing the pool to not get restarted by reconnectServer. (Issue #99, https://github.com/nbrachet). * Make cursor getMore or killCursor correctly trigger pool reconnect to single server if pool has not been destroyed. * Make ismaster monitoring for single server connection default to avoid user confusion due to change in behavior. 2.1.20 2016-05-25 ----------------- * Refactored MongoClient options handling to simplify the logic, unifying it. * NODE-707 Implemented openUploadStreamWithId on GridFS to allow for custom fileIds so users are able to customize shard key and shard distribution. * NODE-710 Allow setting driver loggerLevel and logger function from MongoClient options. * Updated mongodb-core to 1.3.20. * Minor fix for SSL errors on connection attempts, minor fix to reconnect handler for the server. * Don't write to socket before having registered the callback for commands, work around for windows issuing error events twice on node.js when socket gets destroyed by firewall. * Fix minor issue where connectingServers would not be removed correctly causing single server connections to not auto-reconnect. 2.1.19 2016-05-17 ---------------- * Handle situation where a server connection in a replicaset sometimes fails to be destroyed properly due to being in the middle of authentication when the destroy method is called on the replicaset causing it to be orphaned and never collected. * Ensure replicaset topology destroy is never called by SDAM. * Ensure all paths are correctly returned on inspectServer in replset. * Updated mongodb-core to 1.3.19 to fix minor connectivity issue on quick open/close of MongoClient connections on auth enabled mongodb Replicasets. 2.1.18 2016-04-27 ----------------- * Updated mongodb-core to 1.3.18 to fix Node 6.0 issues. 2.1.17 2016-04-26 ----------------- * Updated mongodb-core to 1.3.16 to work around issue with early versions of node 0.10.x due to missing unref method on ClearText streams. * INT-1308: Allow listIndexes to inherit readPreference from Collection or DB. * Fix timeout issue using new flags #1361. * Updated mongodb-core to 1.3.17. * Better handling of unique createIndex error. * Emit error only if db instance has an error listener. * DEFAULT authMechanism; don't throw error if explicitly set by user. 2.1.16 2016-04-06 ----------------- * Updated mongodb-core to 1.3.16. 2.1.15 2016-04-06 ----------------- * Updated mongodb-core to 1.3.15. * Set ssl, sslValidate etc to mongosOptions on url_parser (Issue #1352, https://github.com/rubenstolk). - NODE-687 Fixed issue where a server object failed to be destroyed if the replicaset state did not update successfully. This could leave active connections accumulating over time. - Fixed some situations where all connections are flushed due to a single connection in the connection pool closing. 2.1.14 2016-03-29 ----------------- * Updated mongodb-core to 1.3.13. * Handle missing cursor on getMore when going through a mongos proxy by pinning to socket connection and not server. 2.1.13 2016-03-29 ----------------- * Updated mongodb-core to 1.3.12. 2.1.12 2016-03-29 ----------------- * Updated mongodb-core to 1.3.11. * Mongos setting acceptableLatencyMS exposed to control the latency women for mongos selection. * Mongos pickProxies fall back to closest mongos if no proxies meet latency window specified. * isConnected method for mongos uses same selection code as getServer. * Exceptions in cursor getServer trapped and correctly delegated to high level handler. 2.1.11 2016-03-23 ----------------- * Updated mongodb-core to 1.3.10. * Introducing simplified connections settings. 2.1.10 2016-03-21 ----------------- * Updated mongodb-core to 1.3.9. * Fixing issue that prevented mapReduce stats from being resolved (Issue #1351, https://github.com/davidgtonge) * Forwards SDAM monitoring events from mongodb-core. 2.1.9 2016-03-16 ---------------- * Updated mongodb-core to 1.3.7 to fix intermittent race condition that causes some users to experience big amounts of socket connections. * Makde bson parser in ordered/unordered bulk be directly from mongodb-core to avoid intermittent null error on mongoose. 2.1.8 2016-03-14 ---------------- * Updated mongodb-core to 1.3.5. * NODE-660 TypeError: Cannot read property 'noRelease' of undefined. * Harden MessageHandler in server.js to avoid issues where we cannot find a callback for an operation. * Ensure RequestId can never be larger than Max Number integer size. * NODE-661 typo in url_parser.js resulting in replSetServerOptions is not defined when connecting over ssl. * Confusing error with invalid partial index filter (Issue #1341, https://github.com/vkarpov15). * NODE-669 Should only error out promise for bulkWrite when error is a driver level error not a write error or write concern error. * NODE-662 shallow copy options on methods that are not currently doing it to avoid passed in options mutiation. * NODE-663 added lookup helper on aggregation cursor. * NODE-585 Result object specified incorrectly for findAndModify?. * NODE-666 harden validation for findAndModify CRUD methods. 2.1.7 2016-02-09 ---------------- * NODE-656 fixed corner case where cursor count command could be left without a connection available. * NODE-658 Work around issue that bufferMaxEntries:-1 for js gets interpreted wrongly due to double nature of Javascript numbers. * Fix: GridFS always returns the oldest version due to incorrect field name (Issue #1338, https://github.com/mdebruijne). * NODE-655 GridFS stream support for cancelling upload streams and download streams (Issue #1339, https://github.com/vkarpov15). * NODE-657 insertOne don`t return promise in some cases. * Added destroy alias for abort function on GridFSBucketWriteStream. 2.1.6 2016-02-05 ---------------- * Updated mongodb-core to 1.3.1. 2.1.5 2016-02-04 ---------------- * Updated mongodb-core to 1.3.0. * Added raw support for the command function on topologies. * Fixed issue where raw results that fell on batchSize boundaries failed (Issue #72) * Copy over all the properties to the callback returned from bindToDomain, (Issue #72) * Added connection hash id to be able to reference connection host/name without leaking it outside of driver. * NODE-638, Cannot authenticate database user with utf-8 password. * Refactored pool to be worker queue based, minimizing the impact a slow query have on throughput as long as # slow queries < # connections in the pool. * Pool now grows and shrinks correctly depending on demand not causing a full pool reconnect. * Improvements in monitoring of a Replicaset where in certain situations the inquiry process could get exited. * Switched to using Array.push instead of concat for use cases of a lot of documents. * Fixed issue where re-authentication could loose the credentials if whole Replicaset disconnected at once. * Added peer optional dependencies support using require_optional module. * Bug is listCollections for collection names that start with db name (Issue #1333, https://github.com/flyingfisher) * Emit error before closing stream (Issue #1335, https://github.com/eagleeye) 2.1.4 2016-01-12 ---------------- * Restricted node engine to >0.10.3 (https://jira.mongodb.org/browse/NODE-635). * Multiple database names ignored without a warning (https://jira.mongodb.org/browse/NODE-636, Issue #1324, https://github.com/yousefhamza). * Convert custom readPreference objects in collection.js (Issue #1326, https://github.com/Machyne). 2.1.3 2016-01-04 ---------------- * Updated mongodb-core to 1.2.31. * Allow connection to secondary if primaryPreferred or secondaryPreferred (Issue #70, https://github.com/leichter) 2.1.2 2015-12-23 ---------------- * Updated mongodb-core to 1.2.30. * Pool allocates size + 1 connections when using replicasets, reserving additional pool connection for monitoring exclusively. * Fixes bug when all replicaset members are down, that would cause it to fail to reconnect using the originally provided seedlist. 2.1.1 2015-12-13 ---------------- * Surfaced checkServerIdentity options for MongoClient, Server, ReplSet and Mongos to allow for control of the checkServerIdentity method available in Node.s 0.12.x or higher. * Added readPreference support to listCollections and listIndexes helpers. * Updated mongodb-core to 1.2.28. 2.1.0 2015-12-06 ---------------- * Implements the connection string specification, https://github.com/mongodb/specifications/blob/master/source/connection-string/connection-string-spec.rst. * Implements the new GridFS specification, https://github.com/mongodb/specifications/blob/master/source/gridfs/gridfs-spec.rst. * Full MongoDB 3.2 support. * NODE-601 Added maxAwaitTimeMS support for 3.2 getMore to allow for custom timeouts on tailable cursors. * Updated mongodb-core to 1.2.26. * Return destination in GridStore pipe function. * NODE-606 better error handling on destroyed topology for db.js methods. * Added isDestroyed method to server, replset and mongos topologies. * Upgraded test suite to run using mongodb-topology-manager. 2.0.53 2015-12-23 ----------------- * Updated mongodb-core to 1.2.30. * Pool allocates size + 1 connections when using replicasets, reserving additional pool connection for monitoring exclusively. * Fixes bug when all replicaset members are down, that would cause it to fail to reconnect using the originally provided seedlist. 2.0.52 2015-12-14 ----------------- * removed remove from Gridstore.close. 2.0.51 2015-12-13 ----------------- * Surfaced checkServerIdentity options for MongoClient, Server, ReplSet and Mongos to allow for control of the checkServerIdentity method available in Node.s 0.12.x or higher. * Added readPreference support to listCollections and listIndexes helpers. * Updated mongodb-core to 1.2.28. 2.0.50 2015-12-06 ----------------- * Updated mongodb-core to 1.2.26. 2.0.49 2015-11-20 ----------------- * Updated mongodb-core to 1.2.24 with several fixes. * Fix Automattic/mongoose#3481; flush callbacks on error, (Issue #57, https://github.com/vkarpov15). * $explain query for wire protocol 2.6 and 2.4 does not set number of returned documents to -1 but to 0. * ismaster runs against admin.$cmd instead of system.$cmd. * Fixes to handle getMore command errors for MongoDB 3.2 * Allows the process to properly close upon a Db.close() call on the replica set by shutting down the haTimer and closing arbiter connections. 2.0.48 2015-11-07 ----------------- * GridFS no longer performs any deletes when writing a brand new file that does not have any previous <db>.fs.chunks or <db>.fs.files documents. * Updated mongodb-core to 1.2.21. * Hardened the checking for replicaset equality checks. * OpReplay flag correctly set on Wire protocol query. * Mongos load balancing added, introduced localThresholdMS to control the feature. * Kerberos now a peerDependency, making it not install it by default in Node 5.0 or higher. 2.0.47 2015-10-28 ----------------- * Updated mongodb-core to 1.2.20. * Fixed bug in arbiter connection capping code. * NODE-599 correctly handle arrays of server tags in order of priority. * Fix for 2.6 wire protocol handler related to readPreference handling. * Added maxAwaitTimeMS support for 3.2 getMore to allow for custom timeouts on tailable cursors. * Make CoreCursor check for $err before saying that 'next' succeeded (Issue #53, https://github.com/vkarpov15). 2.0.46 2015-10-15 ----------------- * Updated mongodb-core to 1.2.19. * NODE-578 Order of sort fields is lost for numeric field names. * Expose BSON Map (ES6 Map or polyfill). * Minor fixes for APM support to pass extended APM test suite. 2.0.45 2015-09-30 ----------------- * NODE-566 Fix issue with rewind on capped collections causing cursor state to be reset on connection loss. 2.0.44 2015-09-28 ----------------- * Bug fixes for APM upconverting of legacy INSERT/UPDATE/REMOVE wire protocol messages. * NODE-562, fixed issue where a Replicaset MongoDB URI with a single seed and replSet name set would cause a single direct connection instead of topology discovery. * Updated mongodb-core to 1.2.14. * NODE-563 Introduced options.ignoreUndefined for db class and MongoClient db options, made serialize undefined to null default again but allowing for overrides on insert/update/delete operations. * Use handleCallback if result is an error for count queries. (Issue #1298, https://github.com/agclever) * Rewind cursor to correctly force reconnect on capped collections when first query comes back empty. * NODE-571 added code 59 to legacy server errors when SCRAM-SHA-1 mechanism fails. * NODE-572 Remove examples that use the second parameter to `find()`. 2.0.43 2015-09-14 ----------------- * Propagate timeout event correctly to db instances. * Application Monitoring API (APM) implemented. * NOT providing replSet name in MongoClient connection URI will force single server connection. Fixes issue where it was impossible to directly connect to a replicaset member server. * Updated mongodb-core to 1.2.12. * NODE-541 Initial Support "read committed" isolation level where "committed" means confimed by the voting majority of a replica set. * GridStore doesn't share readPreference setting from connection string. (Issue #1295, https://github.com/zhangyaoxing) * fixed forceServerObjectId calls (Issue #1292, https://github.com/d-mon-) * Pass promise library through to DB function (Issue #1294, https://github.com/RovingCodeMonkey) 2.0.42 2015-08-18 ----------------- * Added test case to exercise all non-crud methods on mongos topologies, fixed numberOfConnectedServers on mongos topology instance. 2.0.41 2015-08-14 ----------------- * Added missing Mongos.prototype.parserType function. * Updated mongodb-core to 1.2.10. 2.0.40 2015-07-14 ----------------- * Updated mongodb-core to 1.2.9 for 2.4 wire protocol error handler fix. * NODE-525 Reset connectionTimeout after it's overwritten by tls.connect. * NODE-518 connectTimeoutMS is doubled in 2.0.39. * NODE-506 Ensures that errors from bulk unordered and ordered are instanceof Error (Issue #1282, https://github.com/owenallenaz). * NODE-526 Unique index not throwing duplicate key error. * NODE-528 Ignore undefined fields in Collection.find(). * NODE-527 The API example for collection.createIndex shows Db.createIndex functionality. 2.0.39 2015-07-14 ----------------- * Updated mongodb-core to 1.2.6 for NODE-505. 2.0.38 2015-07-14 ----------------- * NODE-505 Query fails to find records that have a 'result' property with an array value. 2.0.37 2015-07-14 ----------------- * NODE-504 Collection * Default options when using promiseLibrary. * NODE-500 Accidental repeat of hostname in seed list multiplies total connections persistently. * Updated mongodb-core to 1.2.5 to fix NODE-492. 2.0.36 2015-07-07 ----------------- * Fully promisified allowing the use of ES6 generators and libraries like co. Also allows for BYOP (Bring your own promises). * NODE-493 updated mongodb-core to 1.2.4 to ensure we cannot DDOS the mongod or mongos process on large connection pool sizes. 2.0.35 2015-06-17 ----------------- * Upgraded to mongodb-core 1.2.2 including removing warnings when C++ bson parser is not available and a fix for SCRAM authentication. 2.0.34 2015-06-17 ----------------- * Upgraded to mongodb-core 1.2.1 speeding up serialization and removing the need for the c++ bson extension. * NODE-486 fixed issue related to limit and skip when calling toArray in 2.0 driver. * NODE-483 throw error if capabilities of topology is queries before topology has performed connection setup. * NODE-482 fixed issue where MongoClient.connect would incorrectly identify a replset seed list server as a non replicaset member. * NODE-487 fixed issue where killcursor command was not being sent correctly on limit and skip queries. 2.0.33 2015-05-20 ----------------- * Bumped mongodb-core to 1.1.32. 2.0.32 2015-05-19 ----------------- * NODE-463 db.close immediately executes its callback. * Don't only emit server close event once (Issue #1276, https://github.com/vkarpov15). * NODE-464 Updated mongodb-core to 1.1.31 that uses a single socket connection to arbiters and hidden servers as well as emitting all event correctly. 2.0.31 2015-05-08 ----------------- * NODE-461 Tripping on error "no chunks found for file, possibly corrupt" when there is no error. 2.0.30 2015-05-07 ----------------- * NODE-460 fix; don't set authMechanism for user in db.authenticate() to avoid mongoose authentication issue. 2.0.29 2015-05-07 ----------------- * NODE-444 Possible memory leak, too many listeners added. * NODE-459 Auth failure using Node 0.8.28, MongoDB 3.0.2 & mongodb-node-native 1.4.35. * Bumped mongodb-core to 1.1.26. 2.0.28 2015-04-24 ----------------- * Bumped mongodb-core to 1.1.25 * Added Cursor.prototype.setCursorOption to allow for setting node specific cursor options for tailable cursors. * NODE-430 Cursor.count() opts argument masked by var opts = {} * NODE-406 Implemented Cursor.prototype.map function tapping into MongoClient cursor transforms. * NODE-438 replaceOne is not returning the result.ops property as described in the docs. * NODE-433 _read, pipe and write all open gridstore automatically if not open. * NODE-426 ensure drain event is emitted after write function returns, fixes intermittent issues in writing files to gridstore. * NODE-440 GridStoreStream._read() doesn't check GridStore.read() error. * Always use readPreference = primary for findAndModify command (ignore passed in read preferences) (Issue #1274, https://github.com/vkarpov15). * Minor fix in GridStore.exists for dealing with regular expressions searches. 2.0.27 2015-04-07 ----------------- * NODE-410 Correctly handle issue with pause/resume in Node 0.10.x that causes exceptions when using the Node 0.12.0 style streams. 2.0.26 2015-04-07 ----------------- * Implements the Common Index specification Standard API at https://github.com/mongodb/specifications/blob/master/source/index-management.rst. * NODE-408 Expose GridStore.currentChunk.chunkNumber. 2.0.25 2015-03-26 ----------------- * Upgraded mongodb-core to 1.1.21, making the C++ bson code an optional dependency to the bson module. 2.0.24 2015-03-24 ----------------- * NODE-395 Socket Not Closing, db.close called before full set finished initalizing leading to server connections in progress not being closed properly. * Upgraded mongodb-core to 1.1.20. 2.0.23 2015-03-21 ----------------- * NODE-380 Correctly return MongoError from toError method. * Fixed issue where addCursorFlag was not correctly setting the flag on the command for mongodb-core. * NODE-388 Changed length from method to property on order.js/unordered.js bulk operations. * Upgraded mongodb-core to 1.1.19. 2.0.22 2015-03-16 ----------------- * NODE-377, fixed issue where tags would correctly be checked on secondary and nearest to filter out eligible server candidates. * Upgraded mongodb-core to 1.1.17. 2.0.21 2015-03-06 ----------------- * Upgraded mongodb-core to 1.1.16 making sslValidate default to true to force validation on connection unless overriden by the user. 2.0.20 2015-03-04 ----------------- * Updated mongodb-core 1.1.15 to relax pickserver method. 2.0.19 2015-03-03 ----------------- * NODE-376 Fixes issue * Unordered batch incorrectly tracks batch size when switching batch types (Issue #1261, https://github.com/meirgottlieb) * NODE-379 Fixes bug in cursor.count() that causes the result to always be zero for dotted collection names (Issue #1262, https://github.com/vsivsi) * Expose MongoError from mongodb-core (Issue #1260, https://github.com/tjconcept) 2.0.18 2015-02-27 ----------------- * Bumped mongodb-core 1.1.14 to ensure passives are correctly added as secondaries. 2.0.17 2015-02-27 ----------------- * NODE-336 Added length function to ordered and unordered bulk operations to be able know the amount of current operations in bulk. * Bumped mongodb-core 1.1.13 to ensure passives are correctly added as secondaries. 2.0.16 2015-02-16 ----------------- * listCollection now returns filtered result correctly removing db name for 2.6 or earlier servers. * Bumped mongodb-core 1.1.12 to correctly work for node 0.12.0 and io.js. * Add ability to get collection name from cursor (Issue #1253, https://github.com/vkarpov15) 2.0.15 2015-02-02 ----------------- * Unified behavior of listCollections results so 3.0 and pre 3.0 return same type of results. * Bumped mongodb-core to 1.1.11 to support per document tranforms in cursors as well as relaxing the setName requirement. * NODE-360 Aggregation cursor and command correctly passing down the maxTimeMS property. * Added ~1.0 mongodb-tools module for test running. * Remove the required setName for replicaset connections, if not set it will pick the first setName returned. 2.0.14 2015-01-21 ----------------- * Fixed some MongoClient.connect options pass through issues and added test coverage. * Bumped mongodb-core to 1.1.9 including fixes for io.js 2.0.13 2015-01-09 ----------------- * Bumped mongodb-core to 1.1.8. * Optimized query path for performance, moving Object.defineProperty outside of constructors. 2.0.12 2014-12-22 ----------------- * Minor fixes to listCollections to ensure correct querying of a collection when using a string. 2.0.11 2014-12-19 ----------------- * listCollections filters out index namespaces on < 2.8 correctly * Bumped mongo-client to 1.1.7 2.0.10 2014-12-18 ----------------- * NODE-328 fixed db.open return when no callback available issue and added test. * NODE-327 Refactored listCollections to return cursor to support 2.8. * NODE-327 Added listIndexes method and refactored internal methods to use the new command helper. * NODE-335 Cannot create index for nested objects fixed by relaxing key checking for createIndex helper. * Enable setting of connectTimeoutMS (Issue #1235, https://github.com/vkarpov15) * Bumped mongo-client to 1.1.6 2.0.9 2014-12-01 ---------------- * Bumped mongodb-core to 1.1.3 fixing global leaked variables and introducing strict across all classes. * All classes are now strict (Issue #1233) * NODE-324 Refactored insert/update/remove and all other crud opts to rely on internal methods to avoid any recursion. * Fixed recursion issues in debug logging due to JSON.stringify() * Documentation fixes (Issue #1232, https://github.com/wsmoak) * Fix writeConcern in Db.prototype.ensureIndex (Issue #1231, https://github.com/Qard) 2.0.8 2014-11-28 ---------------- * NODE-322 Finished up prototype refactoring of Db class. * NODE-322 Exposed Cursor in index.js for New Relic. 2.0.7 2014-11-20 ---------------- * Bumped mongodb-core to 1.1.2 fixing a UTF8 encoding issue for collection names. * NODE-318 collection.update error while setting a function with serializeFunctions option. * Documentation fixes. 2.0.6 2014-11-14 ---------------- * Refactored code to be prototype based instead of privileged methods. * Bumped mongodb-core to 1.1.1 to take advantage of the prototype based refactorings. * Implemented missing aspects of the CRUD specification. * Fixed documentation issues. * Fixed global leak REFERENCE_BY_ID in gridfs grid_store (Issue #1225, https://github.com/j) * Fix LearnBoost/mongoose#2313: don't let user accidentally clobber geoNear params (Issue #1223, https://github.com/vkarpov15) 2.0.5 2014-10-29 ---------------- * Minor fixes to documentation and generation of documentation. * NODE-306 (No results in aggregation cursor when collection name contains a dot), Merged code for cursor and aggregation cursor. 2.0.4 2014-10-23 ---------------- * Allow for single replicaset seed list with no setName specified (Issue #1220, https://github.com/imaman) * Made each rewind on each call allowing for re-using the cursor. * Fixed issue where incorrect iterations would happen on each for extensive batchSizes. * NODE-301 specifying maxTimeMS on find causes all fields to be omitted from result. 2.0.3 2014-10-14 ---------------- * NODE-297 Aggregate Broken for case of pipeline with no options. 2.0.2 2014-10-08 ---------------- * Bumped mongodb-core to 1.0.2. * Fixed bson module dependency issue by relying on the mongodb-core one. * Use findOne instead of find followed by nextObject (Issue #1216, https://github.com/sergeyksv) 2.0.1 2014-10-07 ---------------- * Dependency fix 2.0.0 2014-10-07 ---------------- * First release of 2.0 driver 2.0.0-alpha2 2014-10-02 ----------------------- * CRUD API (insertOne, insertMany, updateOne, updateMany, removeOne, removeMany, bulkWrite, findOneAndDelete, findOneAndUpdate, findOneAndReplace) * Cluster Management Spec compatible. 2.0.0-alpha1 2014-09-08 ----------------------- * Insert method allows only up 1000 pr batch for legacy as well as 2.6 mode * Streaming behavior is 0.10.x or higher with backwards compatibility using readable-stream npm package * Gridfs stream only available through .stream() method due to overlapping names on Gridstore object and streams in 0.10.x and higher of node * remove third result on update and remove and return the whole result document instead (getting rid of the weird 3 result parameters) * Might break some application * Returns the actual mongodb-core result instead of just the number of records changed for insert/update/remove * MongoClient only has the connect method (no ability instantiate with Server, ReplSet or similar) * Removed Grid class * GridStore only supports w+ for metadata updates, no appending to file as it's not thread safe and can cause corruption of the data + seek will fail if attempt to use with w or w+ + write will fail if attempted with w+ or r + w+ only works for updating metadata on a file * Cursor toArray and each resets and re-runs the cursor * FindAndModify returns whole result document instead of just value * Extend cursor to allow for setting all the options via methods instead of dealing with the current messed up find * Removed db.dereference method * Removed db.cursorInfo method * Removed db.stats method * Removed db.collectionNames not needed anymore as it's just a specialized case of listCollections * Removed db.collectionInfo removed due to not being compatible with new storage engines in 2.8 as they need to use the listCollections command due to system collections not working for namespaces. * Added db.listCollections to replace several methods above 1.4.10 2014-09-04 ----------------- * Fixed BSON and Kerberos compilation issues * Bumped BSON to ~0.2 always installing latest BSON 0.2.x series * Fixed Kerberos and bumped to 0.0.4 1.4.9 2014-08-26 ---------------- * Check _bsonType for Binary (Issue #1202, https://github.com/mchapman) * Remove duplicate Cursor constructor (Issue #1201, https://github.com/KenPowers) * Added missing parameter in the documentation (Issue #1199, https://github.com/wpjunior) * Documented third parameter on the update callback(Issue #1196, https://github.com/gabmontes) * NODE-240 Operations on SSL connection hang on node 0.11.x * NODE-235 writeResult is not being passed on when error occurs in insert * NODE-229 Allow count to work with query hints * NODE-233 collection.save() does not support fullResult * NODE-244 Should parseError also emit a `disconnected` event? * NODE-246 Cursors are inefficiently constructed and consequently cannot be promisified. * NODE-248 Crash with X509 auth * NODE-252 Uncaught Exception in Base.__executeAllServerSpecificErrorCallbacks * Bumped BSON parser to 0.2.12 1.4.8 2014-08-01 ---------------- * NODE-205 correctly emit authenticate event * NODE-210 ensure no undefined connection error when checking server state * NODE-212 correctly inherit socketTimeoutMS from replicaset when HA process adds new servers or reconnects to existing ones * NODE-220 don't throw error if ensureIndex errors out in Gridstore * Updated bson to 0.2.11 to ensure correct toBSON behavior when returning non object in nested classes * Fixed test running filters * Wrap debug log in a call to format (Issue #1187, https://github.com/andyroyle) * False option values should not trigger w:1 (Issue #1186, https://github.com/jsdevel) * Fix aggregatestream.close(Issue #1194, https://github.com/jonathanong) * Fixed parsing issue for w:0 in url parser when in connection string * Modified collection.geoNear to support a geoJSON point or legacy coordinate pair (Issue #1198, https://github.com/mmacmillan) 1.4.7 2014-06-18 ---------------- * Make callbacks to be executed in right domain when server comes back up (Issue #1184, https://github.com/anton-kotenko) * Fix issue where currentOp query against mongos would fail due to mongos passing through $readPreference field to mongod (CS-X) 1.4.6 2014-06-12 ---------------- * Added better support for MongoClient IP6 parsing (Issue #1181, https://github.com/micovery) * Remove options check on index creation (Issue #1179, Issue #1183, https://github.com/jdesboeufs, https://github.com/rubenvereecken) * Added missing type check before calling optional callback function (Issue #1180) 1.4.5 2014-05-21 ---------------- * Added fullResult flag to insert/update/remove which will pass raw result document back. Document contents will vary depending on the server version the driver is talking to. No attempt is made to coerce a joint response. * Fix to avoid MongoClient.connect hanging during auth when secondaries building indexes pre 2.6. * return the destination stream in GridStore.pipe (Issue #1176, https://github.com/iamdoron) 1.4.4 2014-05-13 ---------------- * Bumped BSON version to use the NaN 1.0 package, fixed strict comparison issue for ObjectID * Removed leaking global variable (Issue #1174, https://github.com/dainis) * MongoClient respects connectTimeoutMS for initial discovery process (NODE-185) * Fix bug with return messages larger than 16MB but smaller than max BSON Message Size (NODE-184) 1.4.3 2014-05-01 ---------------- * Clone options for commands to avoid polluting original options passed from Mongoose (Issue #1171, https://github.com/vkarpov15) * Made geoNear and geoHaystackSearch only clean out allowed options from command generation (Issue #1167) * Fixed typo for allowDiskUse (Issue #1168, https://github.com/joaofranca) * A 'mapReduce' function changed 'function' to instance '\<Object\>' of 'Code' class (Issue #1165, https://github.com/exabugs) * Made findAndModify set sort only when explicitly set (Issue #1163, https://github.com/sars) * Rewriting a gridStore file by id should use a new filename if provided (Issue #1169, https://github.com/vsivsi) 1.4.2 2014-04-15 ---------------- * Fix for inheritance of readPreferences from MongoClient NODE-168/NODE-169 * Merged in fix for ping strategy to avoid hitting non-pinged servers (Issue #1161, https://github.com/vaseker) * Merged in fix for correct debug output for connection messages (Issue #1158, https://github.com/vaseker) * Fixed global variable leak (Issue #1160, https://github.com/vaseker) 1.4.1 2014-04-09 ---------------- * Correctly emit joined event when primary change * Add _id to documents correctly when using bulk operations 1.4.0 2014-04-03 ---------------- * All node exceptions will no longer be caught if on('error') is defined * Added X509 auth support * Fix for MongoClient connection timeout issue (NODE-97) * Pass through error messages from parseError instead of just text (Issue #1125) * Close db connection on error (Issue #1128, https://github.com/benighted) * Fixed documentation generation * Added aggregation cursor for 2.6 and emulated cursor for pre 2.6 (uses stream2) * New Bulk API implementation using write commands for 2.6 and down converts for pre 2.6 * Insert/Update/Remove using new write commands when available * Added support for new roles based API's in 2.6 for addUser/removeUser * Added bufferMaxEntries to start failing if the buffer hits the specified number of entries * Upgraded BSON parser to version 0.2.7 to work with < 0.11.10 C++ API changes * Support for OP_LOG_REPLAY flag (NODE-94) * Fixes for SSL HA ping and discovery. * Uses createIndexes if available for ensureIndex/createIndex * Added parallelCollectionScan method to collection returning CommandCursor instances for cursors * Made CommandCursor behave as Readable stream. * Only Db honors readPreference settings, removed Server.js legacy readPreference settings due to user confusion. * Reconnect event emitted by ReplSet/Mongos/Server after reconnect and before replaying of buffered operations. * GridFS buildMongoObject returns error on illegal md5 (NODE-157, https://github.com/iantocristian) * Default GridFS chunk size changed to (255 * 1024) bytes to optimize for collections defaulting to power of 2 sizes on 2.6. * Refactored commands to all go through command function ensuring consistent command execution. * Fixed issues where readPreferences where not correctly passed to mongos. * Catch error == null and make err detection more prominent (NODE-130) * Allow reads from arbiter for single server connection (NODE-117) * Handle error coming back with no documents (NODE-130) * Correctly use close parameter in Gridstore.write() (NODE-125) * Throw an error on a bulk find with no selector (NODE-129, https://github.com/vkarpov15) * Use a shallow copy of options in find() (NODE-124, https://github.com/vkarpov15) * Fix statistical strategy (NODE-158, https://github.com/vkarpov15) * GridFS off-by-one bug in lastChunkNumber() causes uncaught throw and data loss (Issue #1154, https://github.com/vsivsi) * GridStore drops passed `aliases` option, always results in `null` value in GridFS files (Issue #1152, https://github.com/vsivsi) * Remove superfluous connect object copying in index.js (Issue #1145, https://github.com/thomseddon) * Do not return false when the connection buffer is still empty (Issue #1143, https://github.com/eknkc) * Check ReadPreference object on ReplSet.canRead (Issue #1142, https://github.com/eknkc) * Fix unpack error on _executeQueryCommand (Issue #1141, https://github.com/eknkc) * Close db on failed connect so node can exit (Issue #1128, https://github.com/benighted) * Fix global leak with _write_concern (Issue #1126, https://github.com/shanejonas) 1.3.19 2013-08-21 ----------------- * Correctly rethrowing errors after change from event emission to callbacks, compatibility with 0.10.X domains without breaking 0.8.X support. * Small fix to return the entire findAndModify result as the third parameter (Issue #1068) * No removal of "close" event handlers on server reconnect, emits "reconnect" event when reconnection happens. Reconnect Only applies for single server connections as of now as semantics for ReplSet and Mongos is not clear (Issue #1056) 1.3.18 2013-08-10 ----------------- * Fixed issue when throwing exceptions in MongoClient.connect/Db.open (Issue #1057) * Fixed an issue where _events is not cleaned up correctly causing a slow steady memory leak. 1.3.17 2013-08-07 ----------------- * Ignore return commands that have no registered callback * Made collection.count not use the db.command function * Fix throw exception on ping command (Issue #1055) 1.3.16 2013-08-02 ----------------- * Fixes connection issue where lots of connections would happen if a server is in recovery mode during connection (Issue #1050, NODE-50, NODE-51) * Bug in unlink mulit filename (Issue #1054) 1.3.15 2013-08-01 ----------------- * Memory leak issue due to node Issue #4390 where _events[id] is set to undefined instead of deleted leading to leaks in the Event Emitter over time 1.3.14 2013-08-01 ----------------- * Fixed issue with checkKeys where it would error on X.X 1.3.13 2013-07-31 ----------------- * Added override for checkKeys on insert/update (Warning will expose you to injection attacks) (Issue #1046) * BSON size checking now done pre serialization (Issue #1037) * Added isConnected returns false when no connection Pool exists (Issue #1043) * Unified command handling to ensure same handling (Issue #1041, #1042) * Correctly emit "open" and "fullsetup" across all Db's associated with Mongos, ReplSet or Server (Issue #1040) * Correctly handles bug in authentication when attempting to connect to a recovering node in a replicaset. * Correctly remove recovering servers from available servers in replicaset. Piggybacks on the ping command. * Removed findAndModify chaining to be compliant with behavior in other official drivers and to fix a known mongos issue. * Fixed issue with Kerberos authentication on Windows for re-authentication. * Fixed Mongos failover behavior to correctly throw out old servers. * Ensure stored queries/write ops are executed correctly after connection timeout * Added promoteLongs option for to allow for overriding the promotion of Longs to Numbers and return the actual Long. 1.3.12 2013-07-19 ----------------- * Fixed issue where timeouts sometimes would behave wrongly (Issue #1032) * Fixed bug with callback third parameter on some commands (Issue #1033) * Fixed possible issue where killcursor command might leave hanging functions * Fixed issue where Mongos was not correctly removing dead servers from the pool of eligable servers * Throw error if dbName or collection name contains null character (at command level and at collection level) * Updated bson parser to 0.2.1 with security fix and non-promotion of Long values to javascript Numbers (once a long always a long) 1.3.11 2013-07-04 ----------------- * Fixed errors on geoNear and geoSearch (Issue #1024, https://github.com/ebensing) * Add driver version to export (Issue #1021, https://github.com/aheckmann) * Add text to readpreference obedient commands (Issue #1019) * Drivers should check the query failure bit even on getmore response (Issue #1018) * Map reduce has incorrect expectations of 'inline' value for 'out' option (Issue #1016, https://github.com/rcotter) * Support SASL PLAIN authentication (Issue #1009) * Ability to use different Service Name on the driver for Kerberos Authentication (Issue #1008) * Remove unnecessary octal literal to allow the code to run in strict mode (Issue #1005, https://github.com/jamesallardice) * Proper handling of recovering nodes (when they go into recovery and when they return from recovery, Issue #1027) 1.3.10 2013-06-17 ----------------- * Guard against possible undefined in server::canCheckoutWriter (Issue #992, https://github.com/willyaranda) * Fixed some duplicate test names (Issue #993, https://github.com/kawanet) * Introduced write and read concerns for GridFS (Issue #996) * Fixed commands not correctly respecting Collection level read preference (Issue #995, #999) * Fixed issue with pool size on replicaset connections (Issue #1000) * Execute all query commands on master switch (Issue #1002, https://github.com/fogaztuc) 1.3.9 2013-06-05 ---------------- * Fixed memory leak when findAndModify errors out on w>1 and chained callbacks not properly cleaned up. 1.3.8 2013-05-31 ---------------- * Fixed issue with socket death on windows where it emits error event instead of close event (Issue #987) * Emit authenticate event on db after authenticate method has finished on db instance (Issue #984) * Allows creation of MongoClient and do new MongoClient().connect(..). Emits open event when connection correct allowing for apps to react on event. 1.3.7 2013-05-29 ---------------- * After reconnect, tailable getMores go on inconsistent connections (Issue #981, #982, https://github.com/glasser) * Updated Bson to 0.1.9 to fix ARM support (Issue #985) 1.3.6 2013-05-21 ---------------- * Fixed issue where single server reconnect attempt would throw due to missing options variable (Issue #979) * Fixed issue where difference in ismaster server name and seed list caused connections issues, (Issue #976) 1.3.5 20