import type { CustomBinarizationFilter, ScanbotBinarizationFilter } from './document/ParametricFilters';
import type { DocumentsModelRootType } from './documents/DocumentsModel';
import type { AustraliaPostCustomerFormat, BarcodeDocumentFormat, BarcodeFormat, EngineMode, Gs1HandlingMode, MSIPlesseyChecksumAlgorithm, PageDirection, PageSize } from './types';
export interface DetectBarcodesOnImageArguments {
    /**
     * The input image file URI
     */
    imageFileUri: string;
    /**
     * Accepted barcode formats
     */
    barcodeFormats?: BarcodeFormat[];
    /**
     * An optional array of barcode document formats that act as a detection filter.
     * By default all supported document formats will be detected.
     */
    acceptedDocumentFormats?: BarcodeDocumentFormat[];
    /**
     * Barcode scanner engine mode. Default is NEXT_GEN
     */
    engineMode?: EngineMode;
    /**
     * Optional minimum required text length of the detected barcode.
     * The default is 0 (setting is turned off).
     * NOTE: This feature works on ITF barcodes only.
     */
    minimumTextLength?: number;
    /**
     * Optional maximum required text length of the detected barcode.
     * The default is 0 (setting is turned off).
     * NOTE: This feature works on ITF barcodes only.
     */
    maximumTextLength?: number;
    /**
     * Optional minimum required quiet zone on the barcode.
     * Measured in modules (the size of minimal bar on the barcode).
     * The default is 10.
     * NOTE: This feature works on ITF barcodes only.
     */
    minimum1DBarcodesQuietZone?: number;
    /**
     * With this option enabled, the scanner removes checks digits for UPC, EAN and MSI Plessey codes.
     * Has no effect if both single and double digit MSI Plessey checksums are enabled.
     * The default is `false`
     */
    stripCheckDigits?: boolean;
    /**
     * The GS1 handling mode. The default value is PARSE.
     */
    gs1HandlingMode?: Gs1HandlingMode;
    /**
     * The checksum algorithm for MSI Plessey barcodes.
     * The default value is Mod10.
     */
    msiPlesseyChecksumAlgorithm?: MSIPlesseyChecksumAlgorithm;
    /**
     * If `true`, enabled the mode which slightly decreases the scanning quality and the energy consumption, and increases the scanning speed. If `false` - mode is disabled. The default is `false`. Android only.
     * */
    lowPowerMode?: boolean;
    /**
     * If true, an additional quiet zone is added to the input image
     * The default is `false`.
     */
    addAdditionalQuietZone?: boolean;
    /**
     * The customer format used in AUSTRALIA_POST codes. Only relevant for format codes 59 and 62.
     * The default value is `ALPHA_NUMERIC`.
     */
    australiaPostCustomerFormat?: AustraliaPostCustomerFormat;
    /**
     * If `true`, the optional check digit for IATA_2_OF_5 codes is used in validation.
     * The default is `true`.
     */
    useIATA2OF5Checksum?: boolean;
    /**
     * If `true`, the optional check digit for CODE_11 codes is used in validation.
     * The default is `true`.
     */
    useCode11Checksum?: boolean;
}
export interface PdfExtractorArguments {
    /**
     * The location of the PDF file
     */
    pdfFilePath: string;
    /**
     * ( iOS only )
     * The quality that each extracted image should have.
     * This tweaks the compression, affecting the final image file size.
     * (100: maximum quality, 0: minimum quality)
     *
     * Default value is 90
     */
    quality?: number;
    /**
     * ( iOS only )
     * Integer scaling factor applied to the PDF media box frame while extracting.
     * Affects the output image quality.
     * In most cases the recommended value is 2 or higher.
     *
     * Default value is 2.
     */
    scaling?: number;
}
export interface DocumentQualityAnalyzerArguments {
    imageFileUri: string;
    imageSizeLimit?: number;
    minimumNumberOfSymbols?: number;
}
export interface RecognizeMedicalCertificateArguments {
    imageFileUri: string;
    options?: {
        patientInfoRecognitionEnabled?: boolean;
        barcodeRecognitionEnabled?: boolean;
        detectDocumentEnabled?: boolean;
        returnCroppedDocumentUri?: boolean;
    };
}
export interface RecognizeGenericDocumentArguments {
    imageFileUri: string;
    acceptedDocumentFormats?: DocumentsModelRootType[];
}
export interface PerformOCRArguments {
    imageFileUris: string[];
    ocrConfiguration?: OCRConfiguration;
}
export interface CreatePDFArguments {
    imageFileUris: string[];
    options?: CreatePDFOptions;
    encryptedImageFiles?: boolean;
}
export interface CreatePDFOptions {
    pageSize?: PageSize;
    pageDirection?: PageDirection;
    metadata?: PDFMetadata;
    pageFitMode?: PDFPageFitMode;
    dpi?: number;
    jpegQuality?: number;
    resample?: boolean;
    ocrConfiguration?: OCRConfiguration;
}
export interface WriteTIFFArguments {
    imageFileUris: string[];
    options?: CreateTIFFOptions;
}
export interface CreateTIFFOptions {
    binarizationFilter?: CustomBinarizationFilter | ScanbotBinarizationFilter;
    dpi?: number;
    compression?: TIFFCompression;
    userDefinedFields?: TIFFUserDefinedField[];
}
export type OCRConfiguration = OCRScanbotEngineConfiguration | OCRTesseractConfiguration;
/** Slow but powerful OCR engine. Supports non-Latin languages. */
export type OCRTesseractConfiguration = {
    engineMode: 'TESSERACT';
    languages: string[];
};
/** Fast and accurate OCR engine. Supports only Latin languages. */
export type OCRScanbotEngineConfiguration = {
    engineMode: 'SCANBOT_OCR';
};
export interface PDFMetadata {
    author?: string;
    creator?: string;
    title?: string;
    subject?: string;
    keywords?: string;
}
export type PDFPageFitMode = 
/** Fit image into page, preserves aspect ratio. */
'FIT_IN'
/** Fill page with image, preserves aspect ratio. */
 | 'FILL_IN'
/** Stretch image to fill page, does NOT preserve aspect ratio. */
 | 'STRETCH'
/** No resizing, centers the image. */
 | 'NONE';
/** TIFF Compression algorithms. */
export type TIFFCompression = 
/** Supported with binarized images. Supported with colored images. */
'NONE'
/** Supported with binarized images. Is not supported with colored images. */
 | 'CCITTRLE'
/** Supported with binarized images. Is not supported with colored images. */
 | 'CCITT_T4'
/** Supported with binarized images. Is not supported with colored images. */
 | 'CCITT_T6'
/** Supported with binarized images. Supported with colored images. */
 | 'LZW'
/** Supported with binarized images. Is not supported with colored images. */
 | 'CCITTRLEW'
/** Supported with binarized images. Supported with colored images. */
 | 'PACKBITS'
/** Supported with binarized images. Supported with colored images. */
 | 'DEFLATE'
/** Supported with binarized images. Supported with colored images. */
 | 'ADOBE_DEFLATE';
/** Class used to describe user-defined TIFF field. */
export interface TIFFUserDefinedField {
    /** Value of the field. */
    fieldValue: string | number;
    /** Field name. */
    fieldName: string;
    /** Field numeric tag. */
    fieldTag: number;
    /** Field type. */
    fieldType: TIFFUserDefinedFieldType;
}
export type TIFFUserDefinedFieldType = 
/** A numeric field type. */
'NUMERIC'
/** A string based field type. */
 | 'STRING';
export type ExtractImagesFromPdfArguments = PdfExtractorArguments;
export type ExtractPagesFromPdfArguments = PdfExtractorArguments;