// Type definitions for DYMO Label Framework v1.2.6
// Project: http://www.labelwriter.com/software/dls/sdk/docs/DYMOLabelFrameworkJavaScriptHelp/index.html
// Definitions by: Thijs Kuipers <https://github.com/thijskuipers>
// Definitions: https://github.com/DefinitelyTyped/DefinitelyTyped

/**
 * Top namespace for DYMO Label Framework JavaScript library.
 * Latest library available at http://labelwriter.com/software/dls/sdk/js/DYMO.Label.Framework.latest.js
 *
 * Based on information from http://www.labelwriter.com/software/dls/sdk/docs/DYMOLabelFrameworkJavaScriptHelp/index.html
 * which is Copyright (c), 2010, Sanford, L.P. All Rights Reserved.
 *
 * Based on information from http://developers.dymo.com/2010/06/02/dymo-label-framework-overview/
 * which is © 2013 DYMO Label Inside Out
 */
declare namespace dymo.label.framework {

	/** Enumeration that specifies where to draw the Intellegent Mail barcode for an Address object. */
	enum AddressBarcodePosition {
		/** Indicates to print the barcode above the address. */
		AboveAddress,
		/** Indicates to print the barcode below the address. */
		BelowAddress,
		/** Indicates to not print the barcode at all. */
		Suppress
	}

	/**
	 * Emuneration that specifies the direction in which objects and object text are laid out on the label.
	 * For Middle East labels/content specify "RightToLeft", otherwise specify "LeftToRight" (default).
	 */
	enum FlowDirection {
		/** Indicates that the content flows from left to right. */
		LeftToRight,
		/** Indicates that the content flows from right to left. */
		RightToLeft
	}

	/**
	 * Enumeration that specifies the print quality when printing to a LabelWriter printer.
	 */
	enum LabelWriterPrintQuality {
		/** Indicates that text print quality (fast) is used. */
		Text,
		/** Indicates that barcode and images print quality (slow) is used. */
		BarcodeAndGraphics,
		/** Indicates that the print quality is automatically determined based on the types of objects on the label. */
		Auto
	}

	/** Print Job Status */
	enum PrintJobStatus {
		Error,
		Finished,
		InQueue,
		InvalidJobId,
		NotSpooled,
		PaperOut,
		PrinterBusy,
		Printing,
		ProcessingError,
		Unknown
	}

	/** Enumeration that specifies the leader and trailer for a tape label when printing to a Tape printer. */
	enum TapeAlignment {
		/** Indicates a 10mm leader and a 10mm trailer. */
		Center,
		/** Indicates a 6mm leader and a 10mm trailer. */
		Left,
		/** Indicates a 10mm leader and a 6mm trailer. */
		Right
	}

	/** Enumeration that specifies the tape cut mode when printing multiple labels to a Tape printer. Note: This enumeration affects multiple page print jobs only. If a one page job is printed, the tape is always cut. */
	enum TapeCutMode {
		/** Indicates to cut the tape between labels. */
		AutoCut,
		/** Indicates to print cut marks between labels. */
		ChainMarks
	}

	/** Enumeration that specifies which roll to print to when printing to a Twin Turbo printer. */
	enum TwinTurboRoll {
		/** Indicates to print to the left roll only. */
		Left,
		/** Indicates to print to the right roll only. */
		Right,
		/** Indicates to continue printing to the other roll when the current roll is out of paper. Note: This does not indicate which roll to print to first; printing may start on either roll. */
		Auto
	}

	/** Returns the library version number, e.g. "1.2.6" */
	var VERSION: string;

	/** Checks that the browser enviroment is suitable for the Framework. */
	function checkEnvironment(): {
		/** Indicates whether the browser is supported or not. */
		isBrowserSupported: boolean;
		/** Indicates whether the Framework is installed or not. */
		isFrameworkInstalled: boolean;
		/** An empty string if no error is detected; an error message if an error is detected. */
		errorDetails: string;
	};

	/**
	 * Object with properties 'a' or 'alpha' to specify color's alpha channel,
	 * r/red, g/green, b/blue for red, green, blue channels.
	 * The valid range for a/r/g/b fields is [0..255].
	 */
	interface Color {
		/** alpha channel [0..255] default: 255 */
		alpha?: number;
		/** red channel [0..255] default: 0 */
		red?: number;
		/** green channel [0..255] default: 0 */
		green?: number;
		/** blue channel [0..255] default: 0 */
		blue?: number;
	}

	interface CreateLabelRenderParamsXmlParams {
		/** The color of the label. */
		labelColor?: Color;
		/** The color of label shadow. */
		shadowColor?: Color;
		/** The shadow width in TWIPS. If '0' is specified, no shadow is rendered. */
		shadowDepth?: number;
		/**  The direction of the label content on the label (left-to-right or right-to-left). Use the dymo.label.framework.FlowDirection enumeration to specify the value. */
		flowDirection?: FlowDirection;
		/**
		 * If true, the PNG will be generated using the display resolution.
		 * If false, the PNG will be generated using the printer resolution.
		 * If the display resolution is used, the resulting PNG will be smaller.
		 * Use the printer resolution if the resulting image will be zoomed. This will give the zoomed preview better quality.
		 */
		pngUseDisplayResolution?: boolean;
	}

	/**
	 * Creates an XML string suitable to pass to the dymo.label.framework.renderLabel function
	 * as renderParamsXml parameter. Returns an XML string.
	 *
	 * @param params A JavaScript object with the following properties
	 *   (not all properties must be defined; if a property is not defined, a default value is used)
	 */
	function createLabelRenderParamsXml(params: CreateLabelRenderParamsXmlParams): string;

	interface CreateLabelWriterPrintParamsXmlParams {
		/** The number of copies to print. */
		copies?: number;
		/** The print job title/description. */
		jobTitle?: string;
		/** The direction of the label content on the label (left-to-right or right-to-left). Use the dymo.label.framework.FlowDirection enumeration to specify the value. */
		flowDirection?: FlowDirection;
		/** The print quality. Use the dymo.label.framework.LabelWriterPrintQuality enumeration to specify the value. */
		printQuality?: LabelWriterPrintQuality;
		/** The roll to print to if the printer is a TwinTurbo printer. Use the dymo.label.framework.TwinTurboRoll enumeration to specify the value. */
		twinTurboRoll?: TwinTurboRoll;
	}

	/**
	 * Creates an XML string suitable to to pass to the dymo.label.framework.printLabel function
	 * as printParamsXml parameter. Created print parameters are for printing to LabelWriter printers.
	 * Returns an XML string.
	 *
	 * @param params A JavaScript object with the following properties
	 *   (not all properties must be defined; if a property is not defined, a default value is used)
	 */
	function createLabelWriterPrintParamsXml(params: CreateLabelWriterPrintParamsXmlParams): string;

	interface CreateTapePrintParamsXmlParams {
		/** The number of copies to print. */
		copies?: number;
		/** The print job title/description. */
		jobTitle?: string;
		/** The direction of the label content on the label (left-to-right or right-to-left). Use the dymo.label.framework.FlowDirection enumeration to specify the value. */
		flowDirection?: FlowDirection;
		/** The label alignment on the tape. Use the dymo.label.framework.TapeAlignment enumeration to specify the value. */
		alignment?: TapeAlignment;
		/** The cut mode (if auto-cut is supported by the printer). Use the dymo.label.framework.TapeCutMode enumeration to specify the value. */
		cutMode?: TapeCutMode;
	}

	/**
	 * Creates an XML string suitable to pass to the dymo.label.framework.printLabel function as printParamsXml parameter. Created print parameters are for printing to Tape printers.
	 * Returns an XML string.
	 *
	 * @param params A JavaScript object with the following properties
	 *   (not all properties must be defined; if a property is not defined, a default value is used)
	 */
	function createTapePrintParamsXml(params: CreateTapePrintParamsXmlParams): string;

	interface PrinterInfo {
		/** Indicates whether the Auto-Cut feature is supported by the printer or not. Note: The property is only defined if printerType is "TapePrinter". */
		isAutoCutSupported: boolean;
		/** Indicates whether the printer is connected to a computer or not. Note: Currently only returns properly for local USB-connected printers on Windows. */
		isConnected: boolean;
		/** Indicates whether the printer is a local USB-connected printer or a shared network printer. Note: Currently only returns properly on Windows. */
		isLocal: boolean;
		/** Indicates whether the printer is a "LabelWriter Twin Turbo" (has two rolls) or not. Note: The property is only defined if printerType is "LabelWriterPrinter". */
		isTwinTurbo: boolean;
		/** Returns the printer model/driver name. */
		modelName: string;
		/** Returns the printer name (print queue name on Mac). */
		name: string;
		/** Returns the printer type; "LabelWriterPrinter" or "TapePrinter". */
		printerType: string;
	}

	/**
	 * Gets a list of all printers supported by the DYMO Label Framework.
	 * Results are returned in an array-like object.
	 * Each item is of the type dymo.label.framework.PrinterInfo.
	 * In addition, items can be accessed by printer name.
	 */
	function getPrinters(): PrinterInfo[];

	/**
	 * Convenience method (overload of getPrinters) to get a list of all printers of type "LabelWriterPrinter".
	 */
	function getLabelWriterPrinters(): PrinterInfo[];

	/**
	 * Convenience method (overload of getPrinters) to get a list of all printers of type "TapePrinter".
	 */
	function getTapePrinters(): PrinterInfo[];

	/**
	 * Loads an image from a URL or file and returns it as a base64-encoded PNG stream.
	 * The loaded image is not necessarily in PNG format.
	 * The image can be in any format supported by the Framework (by DYMO Label v.8).
	 * The loaded data can be used to set content for an image object on a label.
	 * Note: The comments for {@link openLabelFile} apply to this function as well.
	 *
	 * @param imageUri URL or file name to load the image from.
	 *
	 * @returns A base64-encoded PNG stream.
	 */
	function loadImageAsPngBase64(imageUri: string): string;

	/** Print Job */
	interface PrintJob {
		/**
		 * Gets a status of the print job
		 *
		 * @param replyCallback a function called when the status is available
		 */
		getStatus(replyCallback: (printJobStatusInfo: PrintJobStatusInfo) => any): void;
	}

	/** Print Job Status Info */
	interface PrintJobStatusInfo {
		statusMessage: string;
		status: PrintJobStatus;
	}

	/**
	 * There is no constructor function for ILabel. To get ILabel instance use the
	 * dymo.label.framework.openLabelFile or dymo.label.framework.openLabelXml function.
	 * ILabel provides methods for manipulating label content, such as set address or text
	 * on the label.
	 */
	interface ILabel {
		/**
		 * Gets the Intelligent Mail barcode position for an Address object.
		 *
		 * @param addressIndex The zero-based index of the Address object in a 'virtual' array of all Address objects on the label.
		 *
		 * @returns A string with one of the values defined by the dymo.label.framework.AddressBarcodePosition enumeration.
		 */
		getAddressBarcodePosition(addressIndex: number): AddressBarcodePosition;

		/**
		 * Gets the number of Address objects on the label.
		 */
		getAddressObjectCount(): number;

		/**
		 * Gets the text content of an Address object.
		 *
		 * @param addressIndex The zero-based index of the Address object in a 'virtual' array of all Address objects on the label.
		 *
		 * @returns The plain text from the Address object.
		 */
		getAddressText(addressIndex: number): string;

		/**
		 * Returns the current label as an XML string. The returned XML string can be passed
		 * to functions that accept label XML as a parameter, or can be used to direct content
		 * manipulations not currently supported by the Framework.
		 */
		getLabelXml(): string;

		/**
		 * Gets an array of object reference names on the label. Returns an array of strings.
		 */
		getObjectNames(): string[];

		/**
		 * Gets the 'text' content of an object. The content depends on the object type.
         * * Address and Text objects - Returns the object text without formatting.
         * * Barcode object - Returns the barcode string.
         * * Image - Returns the base64-encoded string on the image's PNG stream (only if image data is embedded with the label and not linked to a URL or file).
         * * Circular Text object - Returns the object text.
         * * Other objects - Returns an empty string.
		 *
		 * @param objectName The name of the object.
		 */
		getObjectText(objectName: string): string;

		/**
		 * Prints the label.
		 *
     	 * @param printerName The name of the printer to print to. A list of printers can be obtained using dymo.label.framework.getPrinters.
     	 * @param printParamsXml The print parameters, such as number of copies, print quality, etc. See [PrintParams.xsd]{@link http://labelwriter.com/software/dls/sdk/PrintParams.xsd}.
     	 * @param labelSetXml
		 *   The LabelSet to print. LabelSet is used to print multiple labels with the same layout, but with different
		 *   data, such as multiple addresses. Use the dymo.label.framework.LabelSetBuilder class to create a LabelSet
		 *   or construct XML manually according to [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}.
		 */
		print(printerName: string, printParamsXml: string, labelSetXml: string): void;

		/**
		 * Prints a label and runs status checking in a loop
		 *
     	 * @param printerName The name of the printer to print to. A list of printers can be obtained using dymo.label.framework.getPrinters.
     	 * @param printParamsXml The print parameters, such as number of copies, print quality, etc. See [PrintParams.xsd]{@link http://labelwriter.com/software/dls/sdk/PrintParams.xsd}.
     	 * @param labelSetXml The LabelSet to print.
		 *   LabelSet is used to print multiple labels with the same layout, but with different data, such as multiple
		 *   addresses. Use the dymo.label.framework.LabelSetBuilder class to create a LabelSet or construct XML manually
		 *   according to [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}.
		 * @param statusCallback Status callback function called when the service returned status information.
		 *   The callback takes two parameters; the first is PrintJob object. It can be used to get the status information on demand,
		 *   without using polling. Also, it might be extended in the future to provide more control over the print job, e.g. an ability
		 *   to cancel it. The second parameter to the callback is PrintJobStatusInfo class. PrintJobStatusInfo has two properties:
		 *   statusMessage that contains a status message string; and status that contains status code. The callback has to return a
		 *   boolean value. If true is returned, than pritnAndPollStatus() will poll the service again after the pollInterval passed.
		 *   If false is returned, then printAndPollStatus() finishes processing.
		 * @param pollInterval Interval in milliseconds to ask the proxy service for the job status information.
		 *
		 * @returns The print job.
		 */
		printAndPollStatus(
			printerName: string,
			printParamsXml: string,
			labelSetXml: string,
			statusCallback: (printJob: PrintJob, printJobStatusInfo: PrintJobStatusInfo) => boolean,
			pollInterval: number): PrintJob;

		/**
		 * Creates a label raster image that can be used for label previewing.
         *
		 * @param renderParamsXml Rendering parameters, such as shadow depth, label color, etc.
		 *   See [LabelRenderParams.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelRenderParams.xsd}.
         * @param printerName The name of the printer that the preview is generated for.
		 *   The preview/output can be different for different printers,
		 *   especially for tape printers with different print head sizes.
		 *   If it is not important what printer the label is printed to,
		 *   an empty string can be passed. In this case, the default printer metrics will
		 *   be used. The default is LW400 for LabelWriter printers and LW400 DUO Tape for
		 *   tape printers.
		 */
		render(renderParamsXml: string, printerName: string): string;

		/**
		 * Sets the Intelligent Mail barcode position for an Address object.
		 *
		 * @param addressIndex The zero-based index of the Address object in a 'virtual' array of all Address objects on the label.
		 * @param barcodePosition The barcode position.
		 *
		 * @returns self
		 */
		setAddressBarcodePosition(addressIndex: number, barcodePosition: AddressBarcodePosition): ILabel;

		/**
		 * Sets the text content of an Address object.
		 *
		 * @param addressIndex The zero-based index of the Address object in a 'virtual' array of all Address objects on the label.
     	 * @param text The plain text string that contains the content of the Address object. Note: The current text formatting is retained on a line-by-line basis.
		  *
		  * @returns self
		 */
		setAddressText(addressIndex: number, text: string): ILabel;

		/**
		 * Sets the text content for an object. The content and/or text formatting are set differently
		 * depending on the object type.
		 *
		 * * Address object - The formatting is applied on a line-by-line basis (using list).
		 * * Text object - The formatting of the current first character is applied to all text.
		 * * Barcode object - The barcode text.
		 * * Image object - The base64-encoded string of image's PNG stream.
		 * * CircularText object - The object text.
		 * * Date and Time and Counter objects - The object's 'Before' text.
		 * * Other objects - An empty string.
		 *
	     * @param objectName The name of the object.
    	 * @param text The plain text string for new object content.
		 */
		setObjectText(objectName: string, text: string): ILabel;
	}

	/**
	 * ILabelSetRecord instance holds data of one LabelSet record. ILabelSetRecord provides
	 * methods for adding data to the record. To create ILabelSetRecord instance,
	 * use dymo.label.framework.LabelSetBuilder.prototype.addRecord method.
	 */
	interface ILabelSetRecord {
		/**
		 * Adds image data to the record.
		 *
     	 * @param objectName The name of the object that the markup is set for.
     	 * @param base64Image The string containing the base64-encoded PNG image stream.
		 *
		 * @returns self
		 */
		setBase64Image(objectName: string, base64Image: string): ILabelSetRecord;

		/** Adds data to the record specified as plain text.
		 *
         * @param objectName The name of the object that the markup is set for.
         * @param text The object text to set.
		 *
		 * @returns self
		 */
		setText(objectName: string, text: string): ILabelSetRecord;

		/**
		 * Adds data to the record specified as text markup.
		 *
		 * @param objectName The name of the object that the markup is set for.
     	 * @param textMarkup The markup string. See [TextMarkup.xsd]{@link http://labelwriter.com/software/dls/sdk/TextMarkup.xsd}.
		 *
		 * @returns self
		 */
		setTextMarkup(objectName: string, textMarkup: string): ILabelSetRecord;
	}

	/**
	 * Loads label content from a file or URL.
     * The following considerations should be taken before using this function:
	 *
     * * The full file name or URL should be specified. The function will not honor relative paths based on document.location.href.
     * * The fileName can be an http:// or file:// URL. On Windows the file name can be a regular file name, for example 'c:\users\desktop\address.label'.
     * * The content of the label will be loaded synchronously. Therefore, if the remote server is down there will be a timeout.
     * * Any local file can be accessed or attempted to be accessed. The function is not limited by any browser restrictions. However, only a valid label file (according to label.xsd schema) can be loaded. This could still be a potential security concern.
     * * The URL is not limited to same-site-origin browser policy. Any URL can be opened.
     * * The proxy settings are the system default settings, these are not necessarily the browser settings.
	 *
     * Use this function only when there is no other way to load label data. In most cases, label data should be loaded using dymo.label.framework.openLabelXml.
	 *
	 * @param fileName FileName or URL to load label from.
	 * 
	 * @returns Returns Label object; provides label manipulation methods.
	 */
	function openLabelFile(fileName: string): ILabel;

	/**
	 * Loads label content from an XML stream/string.
	 * Note: This is the preferred way to load/open label files.
	 * Use XMLHttpRequest() or other standard browser methods to get XML string.
	 *
	 * @param labelXml The label definition as an XML string.
	 * @returns Label object.
	 */
	function openLabelXml(labelXml: string): ILabel;

	/**
	 * Prints one or more labels.
	 *
     * @param printerName The name of the printer to print to. A list of printers can be obtained using
	 *   dymo.label.framework.getPrinters.
     * @param printParamsXml The print parameters, such as number of copies, print quality, etc.
	 *   See [PrintParams.xsd]{@link http://labelwriter.com/software/dls/sdk/PrintParams.xsd}.
     * @param labelXml The label to print.
     * @param labelSetXml The LabelSet to print. LabelSet is used to print multiple labels with the same layout,
	 *   but with different data, such as multiple addresses. Use dymo.label.framework.LabelSetBuilder class to
	 *   create a LabelSet, or construct XML manualy according to
	 *   [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}.
	 */
	function printLabel(printerName: string, printParamsXml: string, labelXml: string, labelSetXml: string): void;

	/**
	 * Prints a label and returns a print job object
	 *
	 * @param printerName The printer to print on. A list of printers can be obtained by getPrinters()
	 * @param printParamsXml Printing parameters, like number of copies, print quality, etc. See [PrintParams.xsd]{@link http://labelwriter.com/software/dls/sdk/PrintParams.xsd}
	 * @param labelXml Label to print
	 * @param labelSetXml
	 *   LabelSet to print. LabelSet is used to print multiple labels with same layout but different data, e.g. multiple addresses.
	 *   Use LabelSetBuilder to create a LabelSet or construct xml manualy according to [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}.
	 */
	function printLabel2(printerName: string, printParamsXml: string, labelXml: string, labelSetXml: string): PrintJob;

	/**
	 * Prints a label and runs status checking in a loop
	 *
	 * @param printerName The printer to print on. A list of printers can be obtained by getPrinters()
	 * @param printParamsXml Printing parameters, like number of copies, print quality, etc. See [PrintParams.xsd]{@link http://labelwriter.com/software/dls/sdk/PrintParams.xsd}
	 * @param labelXml Label to print
	 * @param labelSetXml
	 *   LabelSet to print. LabelSet is used to print multiple labels with same layout but different data, e.g.
	 *   multiple addresses.
	 *   Use LabelSetBuilder to create a LabelSet or construct xml manually according to
	 *   [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}
	 * @param statusCallback
	 *   Function to be called when a print job status is available.
	 *   To continue polling the status the function should return true, false otherwise.
	 * @param pollInterval Polling interval in milliseconds
	 */
	function printLabelAndPollStatus(
		printerName: string,
		printParamsXml: string,
		labelXml: string,
		labelSetXml: string,
		statusCallback: (printJob: PrintJob, printJobStatusInfo: PrintJobStatusInfo) => boolean,
		pollInterval: number): PrintJob;

	/**
	 * Creates a label raster image that can be used for label previewing.
	 * Returns a string that is a base64-encoded PNG stream of the label image.
	 * This string can be used as data: url for  element.
	 * Note: data: urls are not supported by IE6 and IE7. IE8 supports them with a 32KB limit (so it may not be possible to preview 'large' labels).
	 *
     * @param labelXml Label to preview.
     * @param renderParamsXml The rendering parameters, such as shadow depth, label color, etc. See [LabelRenderParams.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelRenderParams.xsd}.
     * @param printerName The name of the printer that the preview is generated for.
	 *   The preview/output can be different for different printers, especially for tape printers
	 *   with different print head sizes. If it is not important what printer the label is
	 *   printed to, an empty string can be passed. In this case, the default printer metrics
	 *   will be used. The default is LW400 for LabelWriter printers and LW400 DUO Tape for tape printers.
	 *
	 * @returns A base64-encoded PNG stream of the label image.
	 */
	function renderLabel(labelXml: string, renderParamsXml: string, printerName: string): string;

	/**
	 * Undocumented
	 */
	interface AddPrinterUriCallback {
		(printerUri: string): any;
	}

	/**
	 * Undocumented, removed, see http://developers.dymo.com/2013/08/14/dymo-sdk-qa/#comment-27119
	 */
	function addPrinterUri(
		printerUri: string,
		location?: string,
		successCallback?: AddPrinterUriCallback,
		errorCallback?: AddPrinterUriCallback): void;

	/**
	 * Undocumented, removed, see http://developers.dymo.com/2013/08/14/dymo-sdk-qa/#comment-27119
	 */
	function removePrinterUri(printerUri: string): void;

	/**
	 * Undocumented, removed, see http://developers.dymo.com/2013/08/14/dymo-sdk-qa/#comment-27119
	 */
	function removeAllPrinterUri(): void;

	/**
	 * LabelSetBuilder is used to create a LabelSet to print multiple labels in one print job.
	 * LabelSet is a collection of records. Each record contains multiple pairs; each pair consists
	 * of the object name and the object text data/content. The data of each record are applied to all
	 * corresponend objects and for each record one label is printed.
	 */
	class LabelSetBuilder {
		/**
		 * Converts record objects to XML format. The XML format schema is defined in [LabelSet.xsd]{@link http://labelwriter.com/software/dls/sdk/LabelSet.xsd}.
		 * Returned XML can be passed to dymo.label.framefork.printLabel as labelSetXml parameter. This function can be used independent of other LabelSetBuilder methods, if records data is generated by other functions.
		 *
		 * @param records The records to convert to XML. Records should be an array-like object of associative-arrays with object names as keys and object text as values.
		 *
		 * @returns An XML string.
		 */
		static toXml(records: {}[]): string;

		/**
		 * Adds a new record to the LabelSet. Returns a record object.
		 */
		addRecord(): ILabelSetRecord;

		/**
		 * Get all record objects in this LabelSetBuilder.
		 */
		getRecords(): ILabelSetRecord[];

		/**
		 * Converts the builder's content to an XML string suitable to pass to dymo.label.framefork.printLabel.
		 */
		toString(): string;
	}
}