// DEFAULT EXPRESSER SETTINGS
// This file has the default settings for all Expresser modules.
// If you want to define or override settings, please create a settings.json
// file, or for specific environments create a settings.NODE_ENV.json with the
// specific NODE_ENV values. For example settings.production.json.

{
    // APP
    // -------------------------------------------------------------------------
    "app": {
        // Enable HTTP compression?
        "compressionEnabled": false,
        // Enable cookies on Express?
        "cookieEnabled": true,
        // Secret key used for cookie encryption.
        "cookieSecret": "ExpresserCookie",
        // Node.js server IP. Leaving blank or null will set the server to listen on all addresses.
        // This value might be overriden by PaaS environmental values.
        "ip": null,
        // If paas is true, Expresser will figure out some settings out of environment variables
        // like IP, ports and tokens. Leave false if you're not deploying to AppFog, Heroku, OpenShift etc.
        "paas": false,
        // Node.js server port. Please note that this value might be overriden by PaaS
        // environmental values (like in AppFog or OpenShift).
        "port": 8080,
        // Enable session store? This will use the cookieSession implementation of Express.
        "sessionEnabled": true,
        // Secret key used for session encryption.
        "sessionSecret": "ExpresserSession",
        // The view engine used by Express. Default is jade.
        "viewEngine": "jade",
        // Connect Assets options.
        "connectAssets": {
            // Build assets? True or false.
            "build": true,
            // Build directories? True or false.
            "buildDir": false,
            // Minify JS and CSS builds? True or false.
            "minifyBuilds": true
        },
        // SSL options to bind server to HTTPS.
        "ssl": {
            // Is SSL enabled? Please note that you must specify the path to the
            // certificate files under the `Path` settings.
            "enabled": false,
            // Create a redirector server to redirect requests from HTTP to HTTPS.
            // This is the port number of the HTTP redirector server. Leave 0, blank
            // or null to disable this feature.
            "redirectorPort": 0
        }
    },

    // CRON
    // -------------------------------------------------------------------------
    "cron": {
        // If `allowReplacing` is true, cron will allow replacing jobs by adding a new
        // job using the same ID. If false, you'll need to remove the existing job
        // before adding otherwise it will throw an error.
        "allowReplacing": true,
        // Enable cron scheduler? If `false` the cron module won't be initialized.
        "enabled": true,
        // If `loadOnInit` is true, the cron.json file will be loaded and cron jobs
        // will be started on init. Otherwise you'll have to manually call `load`
        // and then `start`.
        "loadOnInit": true
    },

    // DATABASE
    // ----------------------------------------------------------------------
    "database": {
        // Connection string to MongoDB, using the format `user:password@hostname/dbname`.
        "connString": null,
        // Enable database? If `false` the MongoDB database module won't be initialized.
        "enabled": true,
        // In case you don't have failover / sharding in place on the database above
        // using MongoDB built-in features, you can set a failover connection string below.
        // It will be used ONLY if connection to the main database fails repeatedly.
        "errorNotifyEmail": null,
        // How long to wait before trying to connect to the main database again (in seconds) in case
        // the module switches to the secondary one.
        "failoverTimeout": 300,
        // How many retries before switching to the failover database or aborting a database operation.
        "maxRetries": 3,
        // Normalize documents ID (replace _id with id when returning documents)?
        "normalizeId": true,
        // How long between connection retries, in milliseconds. Default is half a second.
        "retryInterval": 500,
        // Database connection options.
        "options": {
            // Auto recconect if connection is lost?
            "auto_reconnect": true,
            // Default pool size for connections is 12.
            "poolSize": 12,
            // Safe writes? Setting this to true makes sure that Mongo aknowledges disk writes.
            "safe": false
        }
    },

    // DOWNLOADER
    // -------------------------------------------------------------------------
    "downloader": {
        // Enable downloader? If `false` the downloader module won't be initialized.
        "enabled": true,
        // Default headers to append to all download requests.
        // For example: {"Content-Type": "application/json"}
        "headers": null,
        // How many simultaneous downloads to allow?
        "maxSimultaneous": 6,
        // If true, the downloader will cancel duplicates. A duplicate is considered a download
        // from the same remote URL and the same save location.
        "preventDuplicates": true,
        // Reject unathourized requests (when SSL certificate has expired for example)?
        // Set this to true for increased security.
        "rejectUnauthorized": false,
        // The temp extension used while downloading files. Default is ".download".
        "tempExtension": ".download",
        // Download timeout, in seconds.
        "timeout": 1800
    },

    // EVENTS
    // -------------------------------------------------------------------------
    "events": {
        // Enable central event dispatcher? Please note that if you disable it some
        // inter-module features will not work, although it won't give you exceptions on errors.
        "enabled": true
    },

    // FIREWALL
    // -------------------------------------------------------------------------
    "firewall": {
        // How long should IP be blacklisted, in seconds.
        "blacklistExpires": 30,
        // How long should IP be blacklisted in case it reaches the "MaxRetries" value
        // below after being already blacklisted before?
        "blacklistLongExpires": 3600,
        // If a blacklisted IP keeps attacking, how many attacks till its expiry date
        // extends to the "LongExpires" value above?
        "blacklistMaxRetries": 5,
        // If enabled, all requests will be checked against common attacks.
        "enabled": true,
        // Which HTTP protection patterns should be enabled? Available: lfi, sql, xss
        "httpPatterns": "lfi,sql,xss",
        // Which Socket protection patterns should be enabled? Available: lfi, sql, xss
        "socketPatterns": "lfi,sql,xss"
    },

    // GENERAL
    // -------------------------------------------------------------------------
    "general": {
        // The app title. This must be set so Expresser can properly identify your app.
        "appTitle": "Expresser",
        // The app's base URL, including http://.
        "appUrl": "http://expresser.codeplex.com",
        // Enable or disable debugging messages. Should be false on production environments.
        "debug": false,
        // Default encoding to be used on IO and web requests.
        "encoding": "utf8",
        // How long (seconds) should files read from disk (email templates for example) stay in cache?
        "ioCacheTimeout": 60
    },

    // IMAGING
    // -------------------------------------------------------------------------
    "imaging": {
        // Set to false to disable the imaging module.
        "enabled": true
    },

    // LOGGER
    // -------------------------------------------------------------------------
    "logger": {
        // If true, other modules will use the Logger to log errors before throwing them as exceptions.
        // By default it's false, as ideally you should log errors yourself inside the callbacks.
        "autoLogErrors": false,
        // Output logs to the console? True or false.
        "console": true,
        // If the mail module is properly configured then all critical logs (logger.critical()) will
        // be sent to the email address specified below. Leave blank or null to not send emails.
        "criticalEmailTo": null,
        // For critical emails, avoid sending duplicate messages by setting an expiry time. So it will only
        // send one email every 5 minutes (value set below) for the same error message.
        "criticalEmailExpireMinutes": 5,
        // Unless you have very specific reasons, leave enabled always true otherwise nothing will be logged.
        "enabled": true,
        // Define all log types which should be treated as error (red colour on the console).
        "errorLogTypes": "err,error,warn,warning,critical",
        // Define which log levels should be enabled. For example if you only want to log warnings and errors,
        // set this value to ["warn", "error"].
        "levels": ["info", "warn", "error", "critical"],
        // List will all field / property names to be removed from logs.
        // Default list is "Password, password, passwordHash and passwordEncrypted".
        "removeFields": "Password,password,passwordHash,passwordEncrypted",
        // If `sendIP` is true, the IP address of the machine will be added to logs events.
        // Useful when you have different instances of the app running on different services.
        "sendIP": true,
        // If `sendTimestamp` is true, a timestamp will be added to logs events.
        // Please note that Loggly and Logentries already have a timestamp, so in these
        // cases you can leave this value set to false.
        "sendTimestamp": true,
        // Set `uncaughtException` to true to bind the logger to the `uncaughtException`
        // event on the process and log all uncaught expcetions as errors.
        "uncaughtException": true,
        // Save logs locally. The path to the logs folder is set above under the `path.logsDir` key.
        "local": {
            // Enable local logging?
            "enabled": true,
            // The bufferInterval defines the delay in between disk saves, in milliseconds.
            "bufferInterval": 6000,
            // Sets the max age of log files, in days. Default is 30 days. Setting the
            // maxAge to to 0 or null will cancel the automatic log cleaning.
            "maxAge": 30
        },
        // Please inform your Logentries token below (http://logentries.com).
        "logentries": {
            // Enable Logentries? If true, please set the token below.
            "enabled": false,
            // Your Logentries default token.
            "token": null
        },
        // Inform your Loggly subdomain and token below (http://loggly.com).
        "loggly": {
            // Enable Loggly? If true, please set the subdomain and default token below.
            "enabled": false,
            // Your Loggly subdomain.
            "subdomain": null,
            // Your Loggly default token.
            "token": null
        }
    },

    // MAILER
    // -------------------------------------------------------------------------
    "mailer": {
        // The name of the base template file when loading and parsing email templates.
        // The base path is defined under `settings.path.emailTemplatesDir`.
        "baseTemplateFile": "base.html",
        // If `doNotSend` is true, no email will be sent out. Useful while testing.
        "doNotSend": false,
        // Enable mailer? If `false` the mailer module won't be initialized.
        "enabled": true,
        // Default `from` email address.
        "from": null,
        // DKIM signing options must be set below if you want to sign emails.
        "dkim": {
            "domainName": null,
            "keySelector": null,
            "privateKey": null
        },
        // Main SMTP server.
        "smtp": {
            // The main SMTP host. If set to null or blank, no emails will be sent out.
            "host": null,
            // The main SMTP auth password.
            "password": null,
            // The main SMTP port.
            "port": null,
            // Use SSL / TSL with main SMTP server?
            "secure": false,
            // The service is a shortcut / overriding setting for host, port and secure.
            // For a list of supported services please go to https://github.com/andris9/nodemailer-wellknown#supported-services
            "service": null,
            // The main SMTP auth user.
            "user": null
        },
        // Secondary SMTP server. All settings same as the main one.
        "smtp2": {
            "host": null,
            "password": null,
            "port": null,
            "secure": false,
            "service": null,
            "user": null
        }
    },

    // NEW RELIC PROFILING
    // -------------------------------------------------------------------------
    "newRelic": {
        // Your app name on New Relic.
        "appName": null,
        // Enable new Relic? Please note that you'll also need to set the `appName` and `licenseKey`.
        "enabled": false,
        // Your New Relic license key.
        "licenseKey": null
    },

    // PATH
    // -------------------------------------------------------------------------
    "path": {
        // Path to the email templates folder.
        "emailTemplatesDir": "./emailtemplates/",
        // Path to local logs folder.
        "logsDir": "./logs/",
        // Path to the public folder used by Express.
        "publicDir": "./public/",
        // Path to the SSL key file.
        "sslKeyFile": null,
        // Path to the SSL certificate file.
        "sslCertFile": null,
        // Path where the .jade views are stored.
        "viewsDir": "./views/"
    },

    // SOCKETS
    // -------------------------------------------------------------------------
    "sockets": {
        // Enable the Sockets module?
        "enabled": true
    }
}