# Changelog

All notable changes to this project will be documented in this file.

The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

## Warning

- For plugin < v10.4.0 use Homebridge UI <= v5.5.0
- For plugin >= v10.4.0 use Homebridge UI >= v5.13.0
- after update to v10.0.0 and above the accessory and bridge need to be removed from the homebridge / Home.app and added again

## [10.7.4] - (04.06.2026)

### Fixed

- RESTful / MQTT: after a power restart, when the Envoy gateway took several minutes to come back online, the REST server returned `"This data is not available in your system."` for all endpoints and never recovered without a manual plugin restart; root cause: each retry attempt created a new Express server on the same port — the second and subsequent servers silently failed to bind (port already in use, no error handler), leaving `restFulConnected = false`, so all `update()` calls were skipped even after the device successfully reconnected; fixed by creating the RESTful and MQTT instances once before the retry loop so the port is bound a single time and survives all connect attempts; the `'set'` (POST/MQTT command) handler is attached once via an `activeDevice` reference that is updated to the current `EnvoyDevice` instance only after a successful connect

## [10.7.3] - (14.05.2026)

### Changed

- Energy history: `prit`, `cnit`, `ctit` spike after a connection gap is now distributed evenly across all preceding null records and the first real record; when data resumes after N missing minutes, each slot receives `delta / (N + 1)` instead of all accumulation appearing in one record; previously saved null records on disk are also retroactively backfilled when a real record finally follows them

## [10.7.2] - (14.05.2026)

### Fixed

- Energy meter (`energyMeter`) with meters enabled: `EveCurrent` and `EveVoltage` characteristics were never updated because `characteristics2.push([...])` inserted a nested array instead of two separate objects; changed to `push(item1, item2)`
- Energy history: `prit`, `cnit`, `ctit` returned `null` for the first record of each day (when previous record is from a different day or history is empty); changed to `0`
- Energy history: `r3()` rounding helper now strictly checks `typeof v === 'number' && isFinite(v)` to prevent `NaN` or `Infinity` from being serialised as string `"null"` by `JSON.stringify`

## [10.7.1] - (14.05.2026)

### Changed

- Energy history file format optimized: switched from pretty-printed array-of-objects to compact columnar JSON (object of arrays); key names appear once instead of per record; reduces file size by ~80% (e.g. 10 000 records: ~7 MB → ~1.3 MB); backward-compatible — existing files in old format are automatically migrated on first save; REST and MQTT output unchanged (still array-of-objects)
- All numeric values in energy history records rounded to 3 decimal places

## [10.7.0] - (14.05.2026)

### Changed

- Energy history saving reworked:
  - Records are now saved every minute at the `:00` second and additionally at `23:59:59` each day
  - Timestamps are aligned to the start of each minute (`HH:MM:00`) instead of the actual poll time
  - Missing records (plugin offline, save error) are automatically backfilled with `null` values to maintain a continuous timeline
  - Added new record keys:
    - `prit` — production energy interval in `Wh` between consecutive saved points (same day only, `null` on day boundary)
    - `cnit` — net consumption energy interval in `Wh` between consecutive saved points (same day only, `null` on day boundary)
    - `ctit` — total consumption energy interval in `Wh` between consecutive saved points (same day only, `null` on day boundary)
  - Removed fixed 7-day retention limit; retention is now controlled by configuration
- Added `energyHistoryTime` config option: time in years for which history is retained; `0` — no time limit (keep all data)
- Added `energyHistoryReserveSpace` config option: minimum free disk space in `GB` to maintain; when free space falls below this value the oldest records are deleted to free storage; `0` — disable
- README and sample-config.json updated

## [10.6.13] - (10.05.2026)

### Fixed

- Config schema: `powerConsumptionNetLevelSensors`, `energyConsumptionTotalLevelSensors` and `energyConsumptionNetLevelSensors` had `compareType` listed as a required field in `allOf` validation rules, but the property was not defined in the schema — the Homebridge UI could never set it, so saving the config always failed when any of these sensors had `displayType > 0`; `compareType` removed from `required` in all three sensors (they are level sensors, not quality sensors)

## [10.6.12] - (08.05.2026)

### Fixed

- RESTFul / MQTT data not updating after plugin restart: `externalIntegrations()` was returning before `app.listen()` had finished binding the port, so `restFulConnected` / `mqttConnected` were still `false` when the first data events arrived; both integrations are now awaited via `Promise` that resolves on the `connected` event (5 s timeout for RESTFul, 10 s for MQTT)

## [10.6.11] - (08.05.2026)

### Fixed

- RESTFul / MQTT data not updating after nightly Envoy reset (22:57–23:10 window):
  - `handleError` was clearing `jwtToken.token` on every 401 response, forcing a 30-second delay and a full JWT re-fetch from the Enlighten API even when only the session cookie had expired; now only `tokenValid` is invalidated — `checkToken` already checks `expires_at` independently
  - cron 23:10 restart changed to `runOnStart=false` to prevent all update handlers firing simultaneously right after the Envoy reset, which caused cascading 401 errors
  - `handleWithLock` now catches exceptions thrown by `checkToken` (e.g. from `validateToken`) instead of leaking unhandled promise rejections

## Changed

- `Characteristic.Shedule` → `Characteristic.Schedule` (class name corrected; UUID unchanged)
- `Service.AcBatterieService` → `Service.AcBatteryService`, `Service.AcBatterieSummaryService` → `Service.AcBatterySummaryService` (class names corrected; UUIDs unchanged)
- `ApiUrls.EnchrgeStatus` → `ApiUrls.EnchargeStatus`, `ApiUrls.InternalMeterRevelsalEid` → `ApiUrls.InternalMeterReversalEid`
- corrected display strings: `"Generstor"` → `"Generator"`, `"Powwr on unused phase"` → `"Power on unused phase"`, `"State oF Charge"` → `"State of Charge"`, `"AC Batterie"` → `"AC Battery"`, `"Shedule"` → `"Schedule"`, `acvoltagehighline2` / `acvoltagelowline2` descriptions fixed
- removed unused imports `XMLBuilder`, `XMLValidator` from `envoydata.js`
- internal variable renames: `lockControTime` → `lockControlTime`, `generatorModeContols` → `generatorModeControls`, `comsumptionNet` → `consumptionNet`
- missing `await` added to `axiosInstance.put` in `setEnchargeSettings`

## [10.6.0] - (20.03.2026)

## Changes

- RESTFul and MQTT stored last 7 days energy histor every minute
- RESTFul and MQTT added `inventorybyserialnumber`, `detaileddevicesdatabyserialnumber`
- Energy history extend:
  - `ts - timestamp`
  - `pr - production lifetime`
  - `prt - production today`
  - `pru - production lifetime upload`
  - `prut - production today upload`
  - `cn - consumption net lifetime`
  - `cnt - consumption net today`
  - `cnu - consumption net lifetime upload`
  - `cnut - consumption net today upload`
  - `ct - consumption total lifetime`
  - `ctt - consumption total today`
  - `ctp - consumption total lifetime from pv`
  - `ctpt - consumption total today from pv`

- bump deependencies
- redme updated
- cleanup

## [10.5.4] - (04.03.2026)

## Changes

- RESTFul and MQTT added energy history, stored every minute
- Energy history contain:
  - `ts - timestamp`
  - `pr - production lifetime`
  - `pru - production lifetime upload`
  - `cn - consumption net lifetime`
  - `cnu - consumption net lifetime upload`
  - `ct - consumption total lifetime`
  - `ctp - consumption total lifetime from pv`

- bump deependencies
- redme updated
- cleanup

## [10.5.1] - (02.03.2026)

## Changes

- added energy consumpion from P.V. today/lifetime statistics
- fix power and energy statistics data
- cleanup

## [10.5.0] - (01.03.2026)

## Changes

- added energy history stored
- stability and performance improvements
- RESTFul and MQTT:
  - added detailed devices data transformed (json objects by serial number)
  - added more statistics outputs to the power and energy data

- bump dependencies
- redme updated
- cleanup

## [10.4.9] - (24.02.2026)

## Changes

- disable refresh data at 23:00 and start at 23:05 due to envoy logic restart
- bump dependencies
- cleanup

## [10.4.4] - (16.02.2026)

## Changes

- refactor mqtt
- bump dependencies
- cleanup

## [10.4.2] - (09.01.2026)

## Changes

- fix [#224](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/224)
- fix [#223](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/223)
- fix hide log success
- cleanup

## [10.4.1] - (03.01.2026)

## Changes

- config validation improvements
- config schema updated
- cleanup

## [10.4.0] - (02.01.2026)

## Changes

- added support for Homebridge UI >= v5.13.0
- config schema updated
- readme updated
- cleanup

## [10.3.8] - (17.12.2025)

## Changes

- fix [#222](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/222)
- bump dependencies

## [10.3.7] - (09.12.2025)

## Changes

- moved MQTT to v5
- cleanup

## [10.3.5] - (13.11.2025)

## Changes

- added encharges support connected to all phases
- cleanup

## [10.3.4] - (12.11.2025)

## Changes

- fix [#221](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/221)
- bump dependencies
- cleanup

## [10.3.2] - (30.10.2025)

## Changes

- fix [#220](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/220)

## [10.3.1] - (29.10.2025)

## Changes

- bump dependencies
- redme updated
- cleanup

## [10.3.0] - (20.10.2025)

## Changes

- extend Eve Energy Meter to support (Production, Consumption Net, Consumption Total)
- fix [#218](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/218)
- stability and performance improvements
- config schema updated
- readme updated
- cleanup

## [10.2.6] - (18.10.2025)

## Changes

- fix [#216](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/216)
- fix [#217](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/217)
- fix wireless connections kit publish
- added network interface service and characteristics
- cleanup

## [10.2.5] - (17.10.2025)

## Changes

- update EVE Energy Meter
- cleanup

## [10.2.3] - (15.10.2025)

## Changes

- fix [#215](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/215)
- update EVE Energy Meter
- other small fixes
- cleanup

## [10.2.2] - (12.10.2025)

## Changes

- fix power level not refresh if meter production not enabled [#213](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/213)
- fix enable live data stream [#214](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/214)
- changed OFF state to < 0.5% for power and backup level accessory, before was OFF if level < 1%
- stability and performance improvements
- other small fixes
- redme updates
- cleanup

## [10.2.1] - (03.10.2025)

## Changes

- fix power level not refresh if meter production not enabled [#213](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/213)

## [10.2.0] - (03.10.2025)

## Changes

- fix encharge profile control UI interface
- fix [#205](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/205)
- fix [#206](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/206)
- fix [#207](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/207)
- fix [#209](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/209)
- fix [#211](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/211)
- workaround for [#210](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/210), envoy firmware issue
- prepare to add encharge profile controls option to allow charge from grid
- added configurable system auto lock time
- added EVE energy monitor option (need to be paired as a separate accessory)
- added support for EVSE, PV3P, BackFeed meters
- added support for C6 Combiner Controller, C6 RGM, IQ Meter Collar
- refactor code of ensemble section
- stability and improvements
- config UI updated
- bump dependencies
- redme updated
- cleanup

## [10.1.0] - (01.07.2025)

## Changes

- fix update plc level for microinverters
- added lockcontrol system for envoy section

## [10.0.3] - (29.06.2025)

## Changes

- fix scale plc level to 100%

## [10.0.2] - (29.06.2025)

## Changes

- fix generator mode
- changed RESTFul path `powermode` to `productionstate`
- changed MQTT set key `PowerProductionState` to `ProductionState`
- stability and performance improvements
- redme updated
- cleanup

## [10.0.1] - (25.06.2025)

## Changes

- fix RESTFul `detaileddevicesdata` and `token` paths
- fix Mqtt `token` refresh
- redme updated

## [10.0.0] - (24.06.2025)

## Changes

- full code refactor
- stability and performance improvements
- added many detailed data for microinverters, meters, qrelays
- RESTFul code refactor and updated
- cleanup custom characteristics
- cleanup
- readme updated
- many more small changes

## [9.20.1] - (15.06.2025)

## Changes

- fix [#202](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/202)
- cleanup

## [9.20.0] - (14.06.2025)

## Changes

- stability and performance improvements
- added devicesdata, metersRportsto to the RESTFul rquests
- added Energy and Productin Consumption Total service if present
- added energyLifetimeUpload characteristic for Production(mean self consumption) and Consumption Net(mean upload to the grid)
- added node.js 24 support
- bump dependencies
- redme updated
- cleanup

## [9.19.0] - (04.06.2025)

## Changes

- added microinverters additional data (voltage, frequency, temperature, energy today, yesterday, last seven days, lifetime)  
- redme updated
- cleanup

## [9.18.0] - (30.05.2025)

## Changes

- removed extra production control accessory
- added production control in the main lightbulb accessory
- added control lock accessory to prevent device control accidentially
  - device control possible after unlock
  - locked automatically 30sec after unlock
- config UI updated
- redme updated
- cleanup

## [9.17.7] - (28.05.2025)

## Changes

- stability and performance improvements
- cleanup

## [9.17.5] - (27.05.2025)

## Changes

- prevent update meters characteristics if value are not valid

## [9.17.4] - (27.05.2025)

## Changes

- fix voltage divide
- cleanup

## [9.17.3] - (27.05.2025)

## Changes

- fix power peak update characteristics
- cleanup

## [9.17.2] - (26.05.2025)

## Changes

- cleanup

## [9.17.1] - (26.05.2025)

## Changes

- fix [#199](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/199)

## [9.17.0] - (26.05.2025)

## Changes

- removed duplicated power and energy state sensors, the state sensor can be create by level sensors > 0
- removed meters refresh time
- fix consumption power peak detected
- refactor production all code
- refsctor charcteristics update
- added conparator (!==) to sensors
- config UI improvements
- mqtt clientId and prefix updated
- redme update
- cleanup

## [9.16.0] - (21.05.2025)

## Changes

- added grid quality sensors for(Current, Voltage, Frequency, Power Factor) if meters are installed
- fix qRelay state update
- redme update
- cleanup

## [9.15.0] - (18.05.2025)

## Changes

- fix [#198](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/198)
- refactor code of production and consumption data update (support fw. >= 8.2.4xx)
- bump dependencies
- redme update
- cleanup

## [9.14.6] - (12.05.2025)

## Changes

- fix [#197](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/197)
- bump dependencies

## [9.14.4] - (09.05.2025)

## Changes

- fix read meters reading with envoy firmware 8.3.xx
- better handle some errors/warn
- bump dependencies
- cleanup

## [9.14.3] - (20.04.2025)

## Changes

- fix [#195](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/195)
- fix [#196](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/196)
- cleanup

## [9.14.2] - (20.04.2025)

## Changes

- many cleanup and optimizations
- cleanup

## [9.14.1] - (18.04.2025)

## Changes

- fix namePrefix and call production state even not supported

## [9.14.0] - (18.04.2025)

## Changes

- added multiphase support for q-relay sensor
- digestauth refactor
- passwdcalc refactor
- envoytoken refactor
- redme update
- cleanup

## [9.13.4] - (18.04.2025)

## Changes

- fix power peak level display and detected in consumption total and net
- cleanup

## [9.13.3] - (18.04.2025)

## Changes

- fix reference error in debug mode
- cleanup

## [9.13.2] - (17.04.2025)

## Changes

- fix microinverters publish in v9.13.0 and v9.13.1
- refresh grid profile and update status in runtime
- display in envoy db size and percent full of db only if supported
- display update status in envoy only if supported
- stability and performance optimizations
- cleanup

## [9.13.1] - (16.04.2025)

## Changes

- RESTFul and MQTT update
- stability and performance optimizations
- redme update
- cleanup

## [9.13.0] - (15.04.2025)

## Changes

- added pdm energy and production data to RESTFul and MQTT for Envoy FW >= 8.2.4xx
- removed production all from RESTFul and MQTT
- redme update
- cleanup

## [9.12.6] - (08.04.2025)

## Changes

- fix stop data sampling if error occured durig cookie refresh
- fix set correct accessory category
- added production state data refresh timer
- config UI improvements in section Envoy
- config schema updated
- redme update
- cleanup

## [9.12.0] - (05.04.2025)

## Changes

- after update the plc level refresh control need to be configued again
- after update the production state control and  sensor need to be configued again
- added production state sensor
- config UI improvements in section Envoy
- config schema updated
- bump dependencies
- redme update
- cleanup

## [9.11.0] - (03.04.2025)

## Changes

- after update the credentials method need to be configued again
- after update the dry contact sensor and control need to be configued again
- config UI improvements
- config schema updated
- bump dependencies
- redme update
- cleanup

## [9.10.9] - (30.03.2025)

## Changes

- fix energyConsumptionNetStateSensor UI
- config schema updated

## [9.10.8] - (28.03.2025)

## Changes

- stability and performance improvements
- config schema updated
- cleanup

## [9.10.7] - (26.03.2025)

## Changes

- fix [#192](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/192)

## [9.10.6] - (26.03.2025)

## Changes

- fix Q-Relay state monitoring sensor

## [9.10.5] - (25.03.2025)

## Changes

- added Q-Relay state monitoring sensor
- stability and performance improvements
- config schema updated
- redme updated
- cleanup

## [9.10.0] - (23.03.2025)

## Changes

- added possibility to select accessory type for Envoy
- added possibility to select accessory type for AC Battery, indyvidual and summary
- added possibility to select accessory type for Encharge, indyvidual and summary
- added possibility to set min SoC for light bulb Encharge accessory [#191](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/191)
- stability and performance improvements
- config schema updated
- redme updated
- cleanup

## [9.9.10] - (21.03.2025)

## Changes

- fix [#190](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/190)
- cleanup

## [9.9.9] - (21.03.2025)

## Changes

- fix [#189](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/189)
- cleanup

## [9.9.8] - (20.03.2025)

## Changes

- config UI improvements from [#185](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/185)
- config schema updated

## [9.9.7] - (20.03.2025)

## Changes

- added possibility to set custom encharge name displayed in the home app, closes [#188](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/188)
- added possibility to disable/display encharge light bulb accessory in the home app
- bump dependencies
- config schema updated
- redme updated
- cleanup

## [9.9.4] - (19.03.2025)

## Changes

- fix backup level sensor update [#186](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/186)
- config UI improvements [#185](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/185)
- config schema updated
- cleanup

## [9.9.3] - (18.03.2025)

## Changes

- added default values to fix [#183](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/183)
- cleanup

## [9.9.2] - (15.03.2025)

## Changes

- fix [#182](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/182)
- cleanup

## [9.9.1] - (15.03.2025)

## Changes

- fix [#181](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/181)
- cleanup

## [9.9.0] - (14.03.2025)

## Changes

- added possibility to disable indyvidual accessory
- added read production all (pcm, rgm, eim) and consumption (eim)
- fix debug log
- bump dependencies
- config schema updated
- redme updated
- cleanup

## [9.8.7] - (04.03.2025)

## Changes

- token handling improvements
- digest installer and envoy handling improvements
- error handling improvements
- cleanup

## [9.8.6] - (02.03.2025)

## Changes

- token and cookie handling improvements
- impulse generator corect start state
- cleanup

## [9.8.5] - (28.02.2025)

## Changes

- token and digest authorization handling improvements
- bump dependencies
- cleanup

## [9.8.4] - (27.02.2025)

## Changes

- token handling improvements
- plugin start time improvements
- cleanup

## [9.8.3] - (26.02.2025)

## Changes

- bump dependencies

## [9.8.2] - (26.02.2025)

## Changes

- refactor start external integrations
- bump dependencies
- cleanup

## [9.8.0] - (20.02.2025)

## Changes

- fix enpower grid state error
- added encharge grid state sensor
- added solar grid state sensor
- bump dependencies
- cleanup

## [9.7.6] - (18.02.2025)

## Changes

- stability and improvements
- chore(config): tweak wording, thanks @nstuyvesant
- Updates to the read me (spelling, punctuation, clarification), thanks @nstuyvesant
- bump dependencies
- cleanup

## [9.7.5] - (15.02.2025)

## Changes

- moved custom characteristics and services to seperate file
- added new opt_cheduless properties to storage setting
- stability and improvements
- cleanup

## [9.7.4] - (07.02.2025)

## Changes

- stability and improvements

## [9.7.3] - (04.02.2025)

## Changes

- update RESTFul

## [9.7.0] - (16.01.2025)

## Changes

- added possibility to disable/enable log success, info, warn, error
- config schema updated
- redme updated
- cleanup

## [9.6.12] - (03.01.2025)

## Changes

- limit microinverters count to 70 due [#175](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/175)
- fix powerLevel characteristics warning
- fix display only active phase in live data

## [9.6.10] - (18.12.2024)

## Changes

- update encharges led status
- fix apparent power in live data
- cleanup

## [9.6.9] - (17.12.2024)

## Changes

- fix livedData characteristics warning [#173](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/173)
- cleanup

## [9.6.8] - (16.12.2024)

## Changes

- increase data refresh time issue [#172](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/172)
- bump dependencies
- cleanup

## [9.6.6] - (06.12.2024)

## Changes

- better handle of error and cookies
- bump dependencies
- config.schema updated
- cleanup

## [9.6.5] - (03.12.2024)

## Changes

- check JWT toke is installer or user
- add JWT Token installer option if use own generated token
- config.schema updated
- redme updated
- cleanup

## [9.6.4] - (02.12.2024)

## Changes

- prevent crasch if PLC Level is enabled and credentials data is not installer

## [9.6.3] - (02.12.2024)

## Changes

- prevent crasch if production control is enabled and credentials data is not installer

## [9.6.0] - (30.11.2024)

## Changes

- move from commonJS to esm module
- moved constants.json to constants.js
- cleanup

## [9.5.3] - (28.11.2024)

## Changes

- better handle cookie and own token
- config schema updated
- cleanup

## [9.5.2] - (28.11.2024)

## Changes

- fix display duplicate credentials in UI
- better handle cookie and token
- bump dependencies
- config schema updated
- cleanup

## [9.5.1] - (20.11.2024)

## Changes

- fix reference error before initialization

## [9.5.0] - (19.11.2024)

## Changes

- added possibility to select compare mode for power and energy level sensors
- config schema updated
- readme updated
- cleanup

## [9.4.4] - (18.11.2024)

## Changes

- fix data refresh after error occured
- fix validate own token

## [9.4.3] - (17.11.2024)

## Changes

- fix [#163](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/163)
- added node 23 support
- jwt token get and check refactor
- correct some logs wording
- cleanup

## [9.4.2] - (11.11.2024)

## Changes

- fix reconnect if error ocurred during start
- correct some logs wording
- config.schema updated
- cleanup

## [9.4.1] - (30.10.2024)

## Changes

- fix stop data updating after error occured [#161](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/161)
- added config schema validation
- update dependencies
- config.schema updated
- cleanup

## [9.4.0] - (17.09.2024)

## Changes

- added encharge profile sensors
- fix battery/encharge state and backup level delay
- fix grid state sensor
- move some message to warn
- use async/await for impulse generator
- update dependencies
- cleanup

## [9.3.5] - (31.08.2024)

## Changes

- required upcomming homebridge 2.x.x required
- fix [#153](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/153)
- error handle improvements
- increase axios timeout to 25sec
- cleanup

## [9.3.4] - (27.08.2024)

## Changes

- fix restFul data sampling response
- fix duplicate start run afer error occur
- fix characteristic Rest Power warning
- increase axios timeout to 20sec
- cleanup

## [9.3.3] - (23.08.2024)

## Changes

- fix [#151](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/151)

## [9.3.0] - (23.08.2024)

## Changes

- add control over RESTFul POST JSON Object
- fix RESRFul enable
- add timeout to axios
- return axios error message instead of object if exist

## [9.2.9] - (21.08.2024)

## Changes

- fix energy level sensors
- refactor backbone app code to get envoy dev id
- refactor envoy password calculate code
- refactor installer password calculate code
- add some warn message and allow app working without some not mandatory data

## [9.2.8] - (20.08.2024)

## Changes

- fix encharge live data display
- fix data refresh control
- fix backup level sensors
- cleanup

## [9.2.6] - (19.08.2024)

## Changes

- fix [#149](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/149)

## [9.2.5] - (19.08.2024)

## Changes

- fix correct display error instead empty object
- move some error to warn and prevent to reconnect to envoy

## [9.2.4] - (19.08.2024)

## Changes

- fix [#150](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/150)
- fix voltage divide
- correct some error logs
- cleanup

## [9.2.3] - (18.08.2024)

## Changes

- use warn instead error for not required data
- cleanup

## [9.2.2] - (18.08.2024)

## Changes

- fix [#149](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/149)
- loging refactor
- corect catch error
- cleanup

## [9.2.0] - (16.08.2024)

## Changes

- add generator mode Off/On/Auto control from home app as a extra tiles
- arf profile refactor
- cleanup

## [9.1.3] - (16.08.2024)

## Changes

- decrease homebridge requirements to 1.8.0

## [9.1.2] - (16.08.2024)

## Changes

- dynamically display arf profile only if supported

## [9.1.1] - (16.08.2024)

## Changes

- fix PLC Level warning [#148](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/148)

## [9.1.0] - (16.08.2024)

## Changes

- added enchrge profile cintrol over mqtt
- added enpower state control over mqtt
- added generator mode control over mqtt
- cleanup

## [9.0.2] - (14.08.2024)

## Changes

- fix threw new error characteristics

## [9.0.1] - (14.08.2024)

## Changes

- fix corect remove sensitive data from config mqtt
- remove sensitive data from debug log
- hide passwords, tokens, serial numbers, by typing and display in Config UI
- remove return duplicate promises from whole code

## [9.0.0] - (14.08.2024)

## Changes

### After update to v9.0.0 RESTFull and MQTT config settings need to be updated

- support for Homebridge v2.0.0
- full code refactor
- RESTFul and MQTT config refactor
- renamed config properties, `supportProductionPowerMode` to `supportPowerProductionState`
- renamed config properties, `powerProductionControl` to `powerProductionStateControl`

- system data refresh
  - added native control from home app as a extra tile
  - added control direct from envoy section, 3rd party app
  - added state sensor

- plc level refresh:
  - added native control from home app as a extra tile
- power production:
  - added native control from home app as a extra tile
- generator:
  - added state native control from home app as a extra tile
  - added state direct control from envoy section, 3rd party app
  - added state sensor
  - added mode sensors
- enpower:
  - added grid state native control from home app as a extra tile
  - added grid state control direct from envoy section, 3rd party appp
  - added grid state sensor
  - added dry contacts native control from home app as a extra tile
  - added dry contacts state sensors
- encharge:
  - added state sensor
  - added profile native control from home app as a extra tile  
- other changes  
  - added possibility to enable accessory name as a prefix for all services
  - stability and performance improvements
  - dependencies updated
  - config schema updated
  - bug fixes
  - cleanup

## [8.1.1] - (04.08.2024)

## Changes

- fix display and publish ensemble status and sensors

## [8.1.0] - (04.08.2024)

## Changes

- added new ensemble/encharge/solar sensor profile, grid-tied and grid-forming
- config schema updated
- redme updated
- cleanup

## [8.0.2] - (04.08.2024)

## Changes

- fix [#142](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/142).
- fix characteristic name for encharge profile
- add missing optional characteristic for enphaseWirelessConnectionKitService
- redme updated
- cleanup

## [8.0.0] - (07.07.2024)

## Changes

### After update to v8.0.0 and above from plevious version all sennsors need to be activated in plugin config again

- added possibility to set indyvidual characteristic type for sensors, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`.
- config schema updated
- redme updated
- cleanup

## [7.16.0] - (23.06.2024)

## Changes

- added possibility to use Your own generated Token [#140](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/140)
- config schema updated
- redme updated
- cleanup

## [7.15.4] - (18.06.2024)

## Changes

- bump node modules ws [#139](https://github.com/grzegorz914/homebridge-enphase-envoy/pull/139)

## [7.15.3] - (18.06.2024)

## Changes

- polling code refactor, added impulse generator
- remove production properties from Q-Relay accessory
- cleanup

## [7.15.2] - (09.06.2024)

## Changes

- remove possibility to enable/disable support for live data and ensemble status, now is check automatically
- moved refresh ensemble status refres time to envoy section
- config schema updated
- cleanup

## [7.15.1] - (08.06.2024)

## Changes

- added compare mode to the encharge backup level sensors
- config schema updated

## [7.15.0] - (08.06.2024)

## Changes

- added encharge backup level sensors
- readme updated
- config schema updated
- cleanup

## [7.14.9] - (08.06.2024)

## Changes

- refactor check JWT token
- refactor check arf profile
- correct some logs
- cleanup

## [7.14.8] - (01.06.2024)

## Changes

- fix 401 error after envoy reboot and refresh cocies
- fix characteristics warning for arf profile
- increase time for check token expired
= bump dependencies
- cleanup

## [7.14.5] - (12.05.2024)

## Changes

- refactor token check and request
- added infot about token time expired
- cleanup

## [7.14.4] - (06.05.2024)

## Changes

- stop data polling if token expired, start after refreshed
- fixed power peak handle
- refactor code in passwords calculation and check jwt token

## [7.14.0] - (27.04.2024)

## Changes

- added support to check and control Production Power Mode, firmware 7.x.x required installer credentials data
- added support to check PLC Level, firmware 7.x.x required installer credentials data
- added support to check and control Production Power Mode over MQTT protocol, firmware 7.x.x required installer credentials data
- added support to check PLC Level over MQTT protocol, firmware 7.x.x required installer credentials data
- config.schema updated
- cleanup

## [7.13.0] - (27.04.2024)

## Changes

### After update to v7.13.0 and above from plevious version the refresh time need to be configured again

- changed data refresh time from (ms) go (sec) and precision 0.5
- prevent to set refresh time to 0, now minimum is 0.5 sec
- config.schema updated
- cleanup

## [7.11.14] - (26.02.2024)

## Changes

- fix [#127](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/127)
- fix [#126](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/126)
- fix [#125](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/125)
- cleanup

## [7.11.0] - (11.02.2024)

## Changes

### After update to v7.11.0 and above from plevious version the grid mode sensors need to be configured again

- added support to create multiple enpower/encharge/solar grid mode sensors and select grid mode to match
- config.schema updated
- cleanup

## [7.10.0] - (10.02.2024)

## Changes

- added support for Envoy Firmware 8.x.x
- added support for storage CT meters
- fixed [#114](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/114)
- config.schema updated
- cleanup

## [7.9.0] - (01.01.2024)

## Changes

- added [#118](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/118)
- added state and level lightbulb for ac bateries and encharges
- config.schema updated
- cleanup

## [7.8.0] - (23.12.2023)

## Changes

### After update to v7.8.0 and above from plevious version the sensors need to be configured again

- added [#117](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/117)
- added possibility to set custom name for sensors
- added possibility to activate/deactivate sensors
- added possibility to create multiple sensors for power and energy level
- config.schema updated
- cleanup

## [7.7.5] - (05.12.2023)

## Changes

- fix missing aasync/wait for microinverters data update
- refactor code in section data update
- fix characteristic warning [#115](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/115)
- better handle to fix [#112](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/112)
- config.schema updated
- cleanup

## [7.7.4] - (02.12.2023)

## Changes

- fix [#112](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/112)
- cleanup

## [7.7.3] - (29.11.2023)

## Changes

- fix [#112](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/112)
- cleanup

## [7.7.2] - (26.11.2023)

## Changes

- added debug log for services prepare
- prepare for generators support
- cleanup

## [7.7.1] - (26.11.2023)

## Changes

- dynamically add *Live Data* characteristics based on installed devices
- cleanup

## [7.7.0] - (26.11.2023)

## Changes

- added *Live Data PV* cheracteristics to the HomeKit
- added *Live Data Storage* cheracteristics to the HomeKit
- added *Live Data Grid* cheracteristics to the HomeKit
- added *Live Data Load* cheracteristics to the HomeKit
- added *Live Data Generator* cheracteristics to the HomeKit
- fix [#85](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/85)
- config schema updated
- cleanup

## [7.5.0] - (20.10.2023)

## Changes

### After update to v7.5.0 and above from plevious version the sensors need to be configured again

- added *Power State* contact sensor (Consumption Total) for automations and notifications in HomeKit
- added *Energy State* contact sensor (Consumption Total) for automations and notifications in HomeKit
- added *Energy Level* contact sensor (Consumption Total) for automations and notifications in HomeKit
- added *Power State* contact sensor (Consumption Net) for automations and notifications in HomeKit
- added *Energy State* contact sensor (Consumption Net) for automations and notifications in HomeKit
- added *Energy Level* contact sensor (Consumption Net) for automations and notifications in HomeKit
- added *Enpower Grid State* contact sensor for automations and notifications in HomeKit
- added *Encharge Grid State* contact sensor for automations and notifications in HomeKit
- added *Solar Grid State* contact sensor for automations and notifications in HomeKit
- bump node to min 18.x.x and homebridge to 1.6
- config schema updated
- redme update
- cleanup

## [7.4.0] - (25.07.2023)

## Changes

- added *Energy State* contact sensor for production monitoring, which can be used for notification and automations in HomeKit.
- added *Energy Level* contact sensor for production monitoring, which can be used for notification and automations in HomeKit.
- config schema updated
- cleanup

## [7.3.0] - (20.07.2023)

## Changes

- added *Power Production On/Off* contact sensor for production monitoring, which can be used for notification and automations in HomeKit.
- Use encodeURIComponent in EnvoyToken URLs - thanks @chrisjshull
- config schema updated
- cleanup

## [7.2.0] - (17.07.2023)

## Changes

- added power production level (0-100%) displayed as brightness level in Home app based on all microinvertzers power configured in plugin config
- config schema updated

## [7.1.0] - (16.07.2023)

## Changes

- added accessory switch to display in Home app curren state of power production, if Production Power > 0 then switch is ON
- config schema updated

## [7.0.0] - (14.07.2023)

## After Update to this version need to make corespondent changes in plugin config

## Changes

- added support to get JWT Token automatically from enlighten server using user credentials data
- added support to check expired JWT Token and get new if expired
- added debug for RESTFul server
- added `token` to the RESTFul server request
- added `Token` to the MQTT publisher
- config schema updated
- cleanup

### Removed properties

- `envoyFirmware7xxToken`

### Added properties

- `enlightenUser`
- `enlightenPasswd`
- `envoySerialNumber`

## [6.7.0] - (27.02.2023)

## Changes

- added powerful RESTFul server to use with own automations
- cleanup
- config.schema updated

## [6.6.0] - (26.02.2023)

## Changes

- added for ensemble summary Rest Power
- added for ensemble summary AGG Max Energy
- added for ensemble summary Encharges AGG SoC
- added for ensemble summary Encharges AGG Rated Power
- added for ensemble summary bias frequency, voltage for phasa L2/B and L3/C
- prevent HB crash if for some reason prepare accessory fail
- properties updated/added
- bump dependencies
- cleanup

## [6.5.0] - (17.01.2023)

## Changes

- added possibility to set refresh time for live dta, meters data and production ct

## [6.4.1] - (16.01.2023)

## Changes

- fix wirreles konnections kit crash

## [6.4.0] - (15.01.2023)

## Changes

- code cleanup
- config schema updated
- stability improvements
- reduce memory and cpu ussage
- added *Power Peak* contact sensors for production, consumption total/net which can be used for notification and automations in HomeKit.
- fix display wirelesskit characteristics hovewer is not instlled
- fix [#73](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/73)

## [6.3.2] - (14.01.2023)

## Changes

- fix [#71](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/71)
- fix [#72](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/72)
- fix read grid profile name
- added new properties to ensemble status data
- added profile data to mqtt

## [6.3.1] - (12.01.2023)

## Changes

- code cleanup
- stability and performance improvement

## [6.3.0] - (10.01.2023)

## Changes

- added possibility enable/disable support to check *Laive Data*
- Envoy cpu load reduction
- code cleanup
- performance improvement

## [6.2.0] - (10.01.2023)

## Changes

- added possibility enable/disable support to check *Ensemble Status*
- code cleanup/refactor
- config schema updated

## [6.1.0] - (09.01.2023)

## Changes

- fix [#70](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/70)
- added possibility enable/disable support to check *PLC Level*
- added possibility enable/disable support to check/control production *Power Mode*
- code cleanup

## [6.0.9] - (09.01.2023)

## Changes

- fix [#69](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/69)
- added missing promise
- code cleanup
- some log corrections

## [6.0.8] - (05.01.2023)

## Changes

- code cleanup
- log units and text corrections
- added auto check plc communication level on startup
- added encharges plc level characteristic

## [6.0.7] - (30.12.2022)

## Changes

- fixed wireless connection kit set to true

## [6.0.6] - (30.12.2022)

## Changes

- fixed wireless connection kit characteristics

## [6.0.5] - (29.12.2022)

## Changes

- fixed ensembles, encharges and enpowers read data [#66](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/66)
- publish live data to MQTT if Envoy firmware >= 7.x.x
- bump dependencies

## [6.0.4] - (14.12.2022)

## Changes

- code optimize

## [6.0.3] - (14.12.2022)

## Changes

- fix axios instance with token

## [6.0.2] - (14.12.2022)

## Changes

- digestAuth code refactor
- code cleanup

## [6.0.1] - (13.12.2022)

## Changes

- fixed JWT authorization proces and store cookies for data request
- code optimization
- big thanks @NoSnow3 and @BenouGui for test

## [6.0.0] - (11.12.2022)

## Changes

- added support for Envoy with firmware 7.x.x and Token Authorization
- config schema updated
- big thanks @NoSnow3 for test

## [5.9.7] - (06.12.2022)

## Changes

- bump dependencies

## [5.9.6] - (15.09.2022)

## Changes

- fix refresh inventory data
- bump dependencies

## [5.9.4] - (10.09.2022)

## Changes

- cleanup
- fix mqtt
- bump dependencies

## [5.9.3] - (29.08.2022)

## Changes

- cleanup
- update mqtt topics

## [5.9.2] - (26.08.2022)

## Changes

- cleanup

## [5.9.1] - (26.08.2022)

## Changes

- convert password generator to iuse promises async/await
- cleanup

## [5.9.0] - (25.08.2022)

## Changes

- added installer password generator, no need generate it manually in external generator
- config schema updated

## [5.8.4] - (25.08.2022)

## Changes

- rebuild refresh data process
- config schema updated
- cosmetics changes

## [5.8.3] - (23.08.2022)

## Changes

- fix [#55](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/55)

## [5.8.2] - (21.08.2022)

## Changes

- code cleanup
- better fix Power characteristic warning negative value [#54](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/54)

## [5.8.1] - (13.08.2022)

## Changes

- fix Power characteristic warning negative value [#54](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/54)

## [5.8.0] - (12.08.2022)

## Changes

- added possibility automatically 'Power peak reset' every day, week, month
- config schema updated

## [5.7.8] - (08.08.2022)

## Changes

- fix [#53](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/53)

## [5.7.7] - (08.08.2022)

## Changes

- fix production *Power peak detected* state
- rebuild log

## [5.7.6] - (07.08.2022)

## Changes

- fix auto/manual consumptions 'Power peak reset and save'
- log updated
- properties in code updated

## [5.7.3] - (07.08.2022)

## Changes

- fix auto 'Power peak reset' at midnight

## [5.7.2] - (06.08.2022)

## Changes

- fix characteristic 'Power peak reset' warning

## [5.7.1] - (06.08.2022)

## Changes

- fix update button state characteristics for power peak reset

## [5.7.0] - (06.08.2022)

## Changes

- added possibility to manuall reset *Power peak* (in accessory using button)
- added possibility to automatically reset *Power peak* at midnight (in plugin setting configurable)
- updated config schema

## [5.6.22] - (06.08.2022)

## Changes

- rename *Power Max* to *Power Peak*
- added extra refresh data for production (microinverters)

## [5.6.21] - (03.08.2022)

## Changes

- fix [#52](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/52)

## [5.6.20] - (03.08.2022)

## Changes

- added possibility to disable display device info in log after plugin restart
- check required properties to create accessory
- correct some logs typos

## [5.6.15] - (02.08.2022)

## Changes

- fix refresh power and energy production data if no meters are installed

## [5.6.14] - (02.08.2022)

## Changes

- fix display undefinded Power and Energy type if no meters are installed

## [5.6.13] - (23.07.2022)

## Changes

- refactor information service

## [5.6.12] - (11.05.2022)

## Changes

- fix [#50](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/50)

## [5.6.9] - (25.04.2022)

## Changes

- update dependencies

## [5.6.8] - (25.04.2022)

## Changes

- refactor send mqtt message

## [5.6.7] - (24.04.2022)

## Changes

- update config.schema.json

## [5.6.6] - (30.03.2022)

## Changes

- prevent poll Meters Reading Data if no Meters are installed
- prevent poll Microinverters Power Data if envoy password is not set

## [5.6.5] - (30.03.2022)

## Changes

- refresh time for Meters Reading Data to 1,5sec and Production CT Data to 3 sec.

## [5.6.4] - (29.03.2022)

## Changes

- fixed read microinverters data (error 401) if envoy uses standard password, fix [#48](https://github.com/grzegorz914/homebridge-enphase-envoy/issues/48)

## [5.6.3] - (29.03.2022)

## Added

- debug mode for MQTT Client
-

## Changes

- update check state data
- update debug logging
- removed refresh interval
- update config schema
- removed Entrez Authorization functionality for Envoy with firmware 7.x.x at this time

## [5.6.1] - (20.02.2022)

## Added

- wrire envoy device id to file

## [5.6.0] - (19.02.2022)

## Added

- Entrez Authorization for Envoy with firmware 7.x.x (test phase)

## [5.5.0] - (17.02.2022)

## Added

- MQTT Client, publish all PV installation data
- Debug mode
- Prepare for entrez authorization

## Changes

- update dependencies
- code refactor

## [5.4.34] - (18.01.2022)

## Changes

- update dependencies

## [5.4.33] - (17.01.2022)

## Changes

- update dependencies

## [5.4.32] - (29.12.2021)

- prepare directory and files synchronously

## [5.4.30] - (28.12.2021)

- update node minimum requirements

## [5.4.29] - (20.11.2021)

## Changes

- cosmetics

## [5.4.21] - (25.09.2021)

## Changes

- code cleanup

## [5.4.19] - (24.09.2021)

## Changes

### WARNING - after this update nedd to remove and add accessory to the HomeKit again

- code cleanup
- stability improvements

## [5.4.18] - (24.09.2021)

## Changes

- code cleanup
- fix wrong voltage display, 1-phase instalation

## [5.4.17] - (19.09.2021)

## Changes

- code cleanup

## [5.4.15] - (09.09.2021)

## Changes

- bump dependencies
- stability improvements
- performance improvements

## [5.4.14] - (05.09.2021)

## Changes

- bump dependencies

## [5.4.13] - (04.09.2021)

## Changes

- bump dependencies

## [5.4.1] - (22.08.2021)

## Changes

- removed *envoyDevId* property, now is detect automatically

## [5.4.0] - (21.08.2021)

## Changes

- removed urllib
- added digestAuth method to Axios
- code rebuild and cleanup
- some fixes and improvements

## [5.3.1] - (21.08.2021)

## Changes

- charcterristics data format fixes
- added grid profile characteristic for ensemble
- code rebuild and cleanup

## [5.3.0] - (17.08.2021)

## Changes

- added wireless connection kit characteristics
- code rebuild and cleanup

## [5.2.15] - (16.08.2021)

## Changes

- finally fixed not reconized ensemble (enpower and encharges) devices in previous versions

## [5.2.0] - (15.08.2021)

## Changes

- added possibility Enable/Disable Power Production (in envoy section)

## [5.1.0] - (13.08.2021)

## Changes

- added system Power Production state(in envoy section)
- added enpower status service
- fixed not reconized ensemble (enpower and encharges) devices in previous versions
- updated SKU and Part Nr.
- code rebuild and cleanup
- other fixes and improvements

## [5.0.0] - (05.08.2021)

## Changes

- removed deprecated inherits and moved all characterictics to use ES6 class

## [4.9.0] - (03.08.2021)

## Changes

- added support for Ensemble (Enpowers and Encharges)
- fixed wrong named Encharges to AC Batteries
- other fixes and performance improvements

## [4.8.0] - (12.03.2021)

## Changes

- added possibility to check communications level of all devces on user request
- fixed many small bugs
- code cleanup

## [4.7.0] - (04.03.2021)

## Changes

- update config.chema
- fixed many small bugs
- correct identyfi all hardware
- code cleanup

## [4.6.0] - (24.02.2021)

## Changes

- added Characteristics for Apparent and Reactive Power
- fixed some bugs

## Important note v4.5.0 and above

Version 4.5.0 and above need to be used with Homebridge min. v1.3.0.

## [4.5.0] - (23.02.2021)

## Changes

- code rebuild, use Characteristic.onSet/onGet
- require Homebridge 1.3.x or above

## [4.4.0] - (10.02.2021)

## Changs

- restored possibility to set own user and password for envoy
- added characteristic for communication level Q-Relays, Encharges, Microinverters
- added characteristic for all data from Encharges
- other improvements and fixes

## [4.3.0] - (07.02.2021)

## Changs

- added more characteristics for encharges
- added characteristics for Current, Voltage and Power Factor
- fixed reported bugs

## [4.2.0] - (03.02.2021)

## Changs

- added evnoy characteristics
- fixes and corrections

## [4.1.0] - (02.02.2021)

## Changs

- removed envoyUser, envoyPasswd, Firmware and SerialNumber, now detect the data automatically
- data refresh improvements
- reconfigured config schema
- other fixes and corrections

## Important note v4.0.0 and above

Version 4.0.0 whole new concept.

## [4.0.0] - (30.01.2021)

## Changs

- refactoring whole code
- added Characteristics for Q-Relay, Meters, Microinverters, Encharges
- added whole base of status code all displayes in EVE or Controller app
- added and present state and power of all devices (Envoy, Q-Relay, Meters, Microinverters, Encharges)
- code cleanup and many more

## [3.6.0] - (29.01.2021)

## Changs

- read Laast and Max Power of indyvidual inverters
- code rebuild

## [3.5.15] - (29.01.2021)

## Changs

- list all devices in log with its status

## Important note v3.5.0 and above

Version 3.5.0 detect automatically all installed devices, please check Your config after update to this version.

## [3.5.0] - (29.01.2021)

## Changs

- full automatic check installed devices, Envoy, Inverters, Q-Relay, Meters, Encharges
- rebuild config

## [3.4.3] - (29.01.2021)

## Changs

- added check for installed Q-Relay
- added check for installed Encharge
- added check for installed Meters
- reconfigured config menu
- code rebuild

## [3.3.15] - (26.01.2021)

## Changs

- power Net and Total Max fixes

## [3.3.9] - (01.01.2021)

## Changs

- bump dependiencies

## [3.3.5] - (22.10.2020)

## Changs

- added encharge storage energy offset
- added possibility to select consumtion meter CT - Load only/Load with Solar production
- update config.schema

## [3.2.0] - (08.09.2020)

## Changs

- added async/await function to read deviceInfo and updateStatus

## [3.1.0] - (06.09.2020)

## Changs

- completly reconfigured config schema

## [3.0.15] - (05.09.2020)

## Changs

- changed Characteristic.StatusActive to custom Characteristic.PowerMaxDetected

## [3.0.8] - (05.09.2020)

## Fix

- fix wrong display power detection state

## [3.0.7] - (04.09.2020)

## Added

- added Characteristic.StatusActive to identify Max Power Detection

## [3.0.4] - (04.09.2020)

## Fix

- fix no display Last Seven Days energy

## [3.0.3] - (04.09.2020)

## Changes

- code cleanup

## Important note

Ab verion v3.0.0 accesory moved to Power Meter custom Characteristic, due to Apple HomeKit limitations right now only in EVE app displayed correctly, in HomeKit displayed as 'Unsupported'. If U want to use old CO2 sensor style just still with 2.x.x version

## [3.0.0] - (02.09.2020)

### New

- accesory moved to Power Meter, due to Apple HomeKit limitations right now only in EVE app displayed, in HomeKit displayed as 'Unsupported'.
- added possibility to set lifetime energy offset for production, and consumption.
- added support for encharge storage.

## [2.3.0] - (28.08.2020)

### Added

- added energy production and consumption tile (Today, Last 7D, Lifetime).

## [2.2.0] - (27.08.2020)

### Added

- added possibility to display minus values, exported power to grid.

## [2.1.3] - (27.08.2020)

### Added

- added extra accessory to present Total or Total and Net Consumption. Selectable in consumption power meter option.

## [2.0.6] - (27.08.2020)

### Added

- added extra accessory to present Total Power Consumption if consumption Power meter is selected

## [1.1.2] - (25.08.2020)

### Changes

- performance improvements
- other small fixes

## [1.1.0] - (09.08.2020)

### Added

- performance improvements

## [1.0.3] - (02.07.2020)

### Fixed

- fixed #2 crash if no production meters are installed

## [1.0.1] - (29.06.2020)

### Fixed

- fixed display energy and power values

## [1.0.0] - (28.06.2020)

### Added

- added possibility select consumption power meter

## [0.4.6] - (27.06.2020)

### Fixed

- fixed  display energy symbol in the log

## [0.4.5] - (27.06.2020)

### Added

- added in the log possibility read all power and energy value

## [0.3.5] - (17.06.2020)

### Fixed

- corrections in config.schema.json

## [0.3.0] - (15.06.2020)

### Added

- added possibility to select production meter

## [0.2.0] - (010.06.2020)

### Added

- stored max. Power Production too the file
- config.host now use 'envoy.local' path or Your configured iP adress

## [0.1.1] - (08.06.2020)

### Fixed

- many fixes and more info in log

## [0.0.30] - (05.06.2020)

- working release

## [0.0.1] - (05.06.2020)

- initial release