{ "A35_SERIAL_NUMBER": "A35序列号", "ACTIVE_PHASES": "活跃期", "AC_APPARENTPOWER": "交流视在功率[VA]", "AC_CURRENT": "交流电流[A]", "AC_ENERGY_ALL": "交流电源全部[千瓦时]", "AC_ENERGY_GRID_CONSUMPTION": "交流电网消耗[千瓦时]", "AC_MAX_APPARENTPOWER": "最大交流视在功率[VA]", "AC_MAX_PHASE_COUNT": "交流相数", "AC_POWER": "交流电力[W]", "AC_REACTIVEPOWER": "交流无功功率[VA]", "AC_VOLTAGE": "交流电压[V]", "AD_MAX_APPARENT_POWER": "最大交流视在功率[VA]", "ALIVE": "还活着", "APP_SOFTWARE": "App软件", "ASOC": "ASOC[%]", "AUTARKY": "自动[%]", "AUTHENTICATION": "验证", "ActivePhases": "活动阶段数", "BALANCED_PHASES": "平衡相位", "BAT": "电池", "BATTERY_BEFORE_CAR_MODE": "汽车模式前的电池", "BATTERY_TO_CAR_MODE": "电池到汽车模式", "BAT_CHARGE_LEVEL": "电池充电水平", "BAT_CHARGE_LIMIT": "电池充电限制[W]", "BAT_CYCLE_COUNT": "电池循环计数", "BAT_DISCHARGE_LIMIT": "电池放电限制[W]", "BAT_POWER_IN": "电池电量", "BAT_POWER_OUT": "电池断电", "BAT_SOC": "电池SOC[%]", "BOARD_VERSION": "董事会版本", "BOOTLOADER_SOFTWARE": "引导程序软件", "CHARGE_CYCLES": "充电周期", "CITY": "城市", "CONSUMED_PRODUCTION": "消耗的生产，相对的", "CONSUMPTION": "消耗功率", "COUNTRY": "国家", "COUPLING_MODE": "耦合方式", "CURRENT": "安培数[A]", "CarCharging": "汽车充电", "CarChargingCanceled": "取消汽车充电", "Connected": "连接的设备或服务", "DB": "资料库", "DCB_ALARM": "警报", "DCB_CELL_TEMPERATURE": "电池温度[°C]", "DCB_CELL_VOLTAGE": "电池电压[V]", "DCB_CHARGE_HIGH_TEMPERATURE": "充电高温[°C]", "DCB_CHARGE_LOW_TEMPERATURE": "充电低温[°C]", "DCB_COUNT": "Deep Cycle Batteries数量", "DCB_CURRENT": "电流[A]", "DCB_CURRENT_AVG_30S": "目前平均30秒[A]", "DCB_CYCLE_COUNT": "充电周期数", "DCB_DATA_TABLE_VERSION": "数据表版本", "DCB_DESIGN_CAPACITY": "设计容量[Ah]", "DCB_DESIGN_VOLTAGE": "设计电压[V]", "DCB_DEVICE_NAME": "设备名称", "DCB_END_OF_DISCHARGE": "放电结束电压[V]", "DCB_ERROR": "错误", "DCB_FULL_CHARGE_CAPACITY": "全充电容量[Ah]", "DCB_FW_VERSION": "固件版本", "DCB_LAST_MESSAGE_TIMESTAMP": "最后消息时间戳[epoch]", "DCB_MANUFACTURE_DATE": "制造日期", "DCB_MANUFACTURE_NAME": "制造名称", "DCB_MAX_CHARGE_CURRENT": "最大充电电流[A]", "DCB_MAX_CHARGE_VOLTAGE": "最大充电电压[V]", "DCB_MAX_DISCHARGE_CURRENT": "最大放电电流[A]", "DCB_NR_PARALLEL_CELL": "并行单元数", "DCB_NR_SENSOR": "传感器数量", "DCB_NR_SERIES_CELL": "串联电池数量", "DCB_PCB_VERSION": "PCB版本", "DCB_PROTOCOL_VERSION": "协议版本", "DCB_REMAINING_CAPACITY": "剩余容量[啊]", "DCB_SERIALCODE": "串行代码", "DCB_SERIALNO": "序列号", "DCB_SOC": "充电状态[%]", "DCB_SOH": "健康状况[%]", "DCB_STATUS": "状况", "DCB_VOLTAGE": "电压[V]", "DCB_VOLTAGE_AVG_30S": "电压30秒平均[V]", "DCB_WARNING": "警告", "DCDC": "调节逆变器", "DCDC_CHARGE_LIMIT": "DCDC充电限额[W]", "DCDC_DISCHARGE_LIMIT": "DCDC放电限制[W]", "DC_CURRENT": "直流电流[A]", "DC_MAX_STRING_COUNT": "DC字符串数", "DC_POWER": "直流电源[kW]", "DC_STRING_ENERGY_ALL": "直流电能全部[千瓦时]", "DC_VOLTAGE": "直流电压[V]", "DEFAULT": "默认", "DERATE_AT_PERCENT_VALUE": "以百分比值降额[%]", "DERATE_AT_POWER_VALUE": "功率值降额[W]", "DEVICE_CONNECTED": "设备连接", "DEVICE_ID": "设备ID", "DEVICE_IN_SERVICE": "使用中的设备", "DEVICE_NAME": "设备名称", "DEVICE_STATE": "设备状态", "DEVICE_WORKING": "设备工作", "DHCP_STATUS": "DHCP状态", "DIAG_ERRORS": "DIAG错误", "DIAG_INFOS": "DIAG资讯", "DIAG_TEMP_1": "温度1", "DIAG_TEMP_2": "温度2", "DIAG_WARNINGS": "DIAG警告", "DISCHARGE_START_POWER": "电池放电启动功率[W]", "DNS": "DNS IP地址", "DPP_MONTHS_ACTIVE": "几个月活跃[bitmask]", "DPP_PRICE_BASED_BATTERY_CHARGE_ACTIVE": "基于价格的电池充电活动有效", "DPP_PRICE_BASED_BATTERY_CHARGE_ENABLED": "启用了基于价格的电池充电", "DPP_PRICE_BASED_WB_CHARGE_ACTIVE": "基于价格的Walbox充电活动活动", "DPP_PRICE_LIMIT_BATTERY": "电池电池充电的价格限制[货币]", "DPP_SOC_BATTERY": "SOC电池[％]", "EMERGENCY_POWER": "应急电源", "EMERGENCY_POWER_RETRY": "紧急电源重试", "EMERGENCY_POWER_STATUS": "紧急电源状态", "EMS": "能源管理系统", "EMS_STATUS_0": "不允许收费", "EMS_STATUS_1": "不允许放电", "EMS_STATUS_2": "紧急电源可能", "EMS_STATUS_3": "等待太阳突破（天气预报）", "EMS_STATUS_4": "逆变器降额(更多PV功率可用)", "EMS_STATUS_5": "充电空闲周期活动", "EMS_STATUS_6": "放电空闲期活动", "EMS_STATUS_7": "远程控制主动(农场)", "EMS_STATUS_8": "达到紧急电源储备(电池充电保存为紧急电源)", "EMS_STATUS_9": "电池训练活动", "END_HOUR": "结束时间", "END_MINUTE": "结束分钟", "ENERGY_ALL": "能源全", "ENERGY_L1": "L1 能量", "ENERGY_L2": "L2 能量", "ENERGY_L3": "L3 能量", "ENERGY_SOLAR": "能源及太阳能", "EOD_VOLTAGE": "放电结束电压[V]", "EP": "应急电源", "EPTEST_NEXT_TESTSTART": "应急电源下一次测试-启动", "EPTEST_RUNNING": "应急电源测试运行", "EPTEST_START_COUNTER": "应急电源测试启动计数器", "ERROR_CODE": "错误代码", "ERROR_MESSAGE": "错误消息", "ERROR_SOURCE": "错误来源", "ERROR_TIMESTAMP": "错误时间戳", "ERROR_TYPE": "错误类型", "EXTERN_DATA": "外部数据", "EXTERN_DATA_ALG": "Extern数据alg", "EXTERN_DATA_ALL": "Extern数据全部", "EXTERN_DATA_NET": "外部数据网", "EXTERN_DATA_SUN": "Extern数据太阳", "EXT_SRC_AVAILABLE": "可用的外部源", "E_MAIL": "电子邮件", "FCC": "联邦通信委员会", "FIRMWARE_VERSION": "固件版本", "FLASH_VERSION": "Flash版本", "FON": "电话号码", "FPGA_FIRMWARE": "FPGA固件", "FREQUENCY_OVER": "频率超过", "FREQUENCY_UNDER": "频率下", "FS_AVAILABLE": "可用的文件系统内存", "FS_SIZE": "文件系统内存大小", "FS_USED": "使用的文件系统内存", "FS_USE_PERCENT": "使用的文件系统百分比", "GATEWAY": "网关IP地址", "GENERAL_ERROR": "一般错误", "GET_PHASE_ELIMINATION": "获得相消除", "GRAPH_INDEX": "图中的相对位置", "GRID_POWER_IN": "电网供电", "GRID_POWER_OUT": "电网电力", "GUI_TARGET": "GUI目标", "GridPower": "电网电力", "HISTORY_DATA_DAY": "一天的数据", "HISTORY_DATA_MONTH": "一个月的数据", "HISTORY_DATA_WEEK": "一周数据", "HISTORY_DATA_YEAR": "一年的数据", "HW_VERSION": "硬件版本", "IDLE_PERIOD_ACTIVE": "空闲周期活动", "IDLE_PERIOD_DAY": "空闲时段日", "IDLE_PERIOD_HOUR": "空闲时段小时", "IDLE_PERIOD_MINUTE": "空闲时间分钟", "IDLE_PERIOD_TYPE": "空闲周期类型", "INFO": "资料", "INODES": "I-节点总数", "INODES_AVAILABLE": "I-节点可用", "INODES_USED": "使用的i-节点", "INODES_USE_PERCENT": "使用的i-节点百分比", "INSTALLED_PEAK_POWER": "装机峰值功率[Wp]", "IP_ADDRESS": "IP地址", "IS_GRID_CONNECTED": "岛屿国家电网连接", "IS_INVALID_STATE": "岛屿状态无效状态", "IS_ISLAND_GRID": "岛屿国家岛屿网格", "IS_POSSIBLE": "岛国可能", "IS_READY_FOR_SWITCH": "岛屿国家准备转换", "IS_SYSTEM_REBOOTING": "是系统重启", "I_BAT": "电流电流", "I_DCL": "电流到逆变器", "Information": "资料", "LAST_ERROR": "最后一个错误", "MAC_ADDRESS": "MAC地址", "MANUAL_CHARGE_ACTIVE": "手动充电", "MANUAL_CHARGE_ENERGY": "手动充电能量", "MANUAL_CHARGE_ENERGY_COUNTER": "手动充电能量计数器", "MANUAL_CHARGE_LASTSTART": "手动充电最后一次启动", "MANUAL_CHARGE_START_COUNTER": "手动充电启动计数器", "MAX_BAT_VOLTAGE": "最大电池电压[V]", "MAX_CHARGE_CURRENT": "最大充电电流[A]", "MAX_CHARGE_POWER": "最大电池充电功率 [W]", "MAX_DCB_CELL_TEMPERATURE": "最高DCB电池温度[°C]", "MAX_DISCHARGE_CURRENT": "最大放电功率[W]", "MAX_DISCHARGE_POWER": "最大电池放电功率 [W]（绝对值）", "MAX_TEMPERATURE": "最高温度[°C]", "MIN_DCB_CELL_TEMPERATURE": "最低DCB电池温度[°C]", "MIN_TEMPERATURE": "最低温度[°C]", "MODE": "模式", "MODULE": "模块", "MODULE_VOLTAGE": "模块电压 [V]", "NAME": "姓名", "ON_GRID": "在网格上", "OVERRIDE_AVAILABLE_POWER": "覆盖可用电源", "PARAM_1": "参数1", "PARAM_2": "参数2", "PARAM_EP_RESERVE": "紧急电源储备[Wh]", "PARAM_EP_RESERVE_ENERGY": "应急能量储备、目标能量", "PARAM_EP_RESERVE_MAX_ENERGY": "应急能量储备，最大能量", "PARAM_LAST_SOC": "最后一个SOC", "PARAM_NO_REMAINING_RETRY": "没有剩余重试次数", "PARAM_TIME_LAST_EMPTY": "最新电池空时间戳", "PARAM_TIME_LAST_FULL": "最新电池完整时间戳", "PARAM_TIME_TO_RETRY": "重试时间", "PERIOD_ACTIVE": "启用了空闲周期", "PERIOD_DESCRIPTION": "空闲时期描述", "PERIOD_START": "闲置的开始时间", "PERIOD_STOP": "闲置时期的结束时间", "PERIOD_WEEKDAYS": "分配空闲期的工作日", "PM": "功率计", "PM_0_POWER": "PM0功率", "PM_1_POWER": "PM1功率", "PM_ACTIVE_PHASES": "PM活动阶段", "PM_DEVICE_ID": "PM设备id", "PM_DEVICE_STATE": "PM设备状态", "PM_DEVICE_STATE_CONNECTED": "PM设备状态已连接", "PM_DEVICE_STATE_IN_SERVICE": "Pm设备状态在服务中", "PM_DEVICE_STATE_WORKING": "PM设备状态工作", "PM_ENERGY_L1": "PM能量L1", "PM_ENERGY_L2": "PM能量L2", "PM_ENERGY_L3": "PM能源L3", "PM_ERROR_CODE": "PM错误代码", "PM_FIRMWARE_VERSION": "PM固件版本", "PM_MAX_PHASE_POWER": "迪亚格*马克斯。 相功率", "PM_MODE": "PM模式", "PM_POWER_L1": "PM功率L1", "PM_POWER_L2": "PM功率L2", "PM_POWER_L3": "PM功率L3", "POSTCODE": "邮政编码", "POWERSAVE_ENABLED": "启用省电模式", "POWER_ADD": "功率增加[W]", "POWER_BAT": "电池功率 [W]", "POWER_GRID": "来自电网的功率 [W]", "POWER_HOME": "回家的电源 [W]", "POWER_L1": "L1 电源", "POWER_L2": "L2 功率", "POWER_L3": "L3 电源", "POWER_LIMITS_USED": "使用的功率限制", "POWER_MODE": "电源模式", "POWER_PV": "光伏发电 [W]", "POWER_WB_ALL": "电源壁箱总[W]", "POWER_WB_SOLAR": "太阳能墙箱[W]", "PRODUCTION_DATE": "生产日期", "PVI": "光伏逆变器", "PVI_RELEASE": "PVI释放", "P_BAT": "电池电源", "P_DCL": "逆变器的电源", "PowerLimitation": "充电功率的限制", "PrechargePercent": "预充电百分比", "RC": "RC", "READY_FOR_SHUTDOWN": "准备关机", "RELEASE": "发行版", "REMAINING_BAT_CHARGE_POWER": "电池剩余电量[W]", "REMAINING_BAT_DISCHARGE_POWER": "电池剩余放电功率[W]", "RESTART_APPLICATION": "重新启动应用程序", "RETURN_CODE": "返回码", "ROLE": "角色", "RSCP": "远程存储控制协议", "RSOC": "计算的 SOC [%]", "RSOC_REAL": "计算实际SOC[%]", "SELF_CONSUMPTION": "自我消耗[%]", "SERIAL_NUMBER": "序列号", "SET_POWER": "设定功率[W]", "SET_POWER_MODE": "电源模式（出站）", "SET_POWER_VALUE": "设定功率(出站)[W]", "SOC": "充电状态", "SPECIFIED_CAPACITY": "指定容量[西]", "SPECIFIED_CHARGE_POWER": "指定充电功率[W]", "SPECIFIED_DISCHARGE_POWER": "指定放电功率[W]", "SPECIFIED_MAX_DCB_COUNT": "指定的最大DCB计数", "START_EMERGENCY_POWER_TEST": "启动应急电源测试", "START_HOUR": "开始时间", "START_MINUTE": "开始分钟", "STATE": "国家", "STATE_AS_STRING": "状态字符串", "STATUS": "状况", "STATUS_CODE": "状态代码", "STREET": "街道", "STREET_NO": "街道号码", "SUBNET_MASK": "子网掩码", "SUBSTATE": "取代", "SUBSTATE_AS_STRING": "取代字符串", "SURNAME": "姓", "SW_RELEASE": "软件发布", "SYS": "系统", "SYSTEM_MODE": "系统模式", "SYSTEM_REBOOT": "系统重启", "SunMode": "太阳模式或混合模式", "SunPower": "太阳能发电", "TEMPERATURE": "温度", "TEMPERATURE_COUNT": "温度值数", "TERMINAL_VOLTAGE": "端子电压[V]", "TIME": "时间", "TIMESTAMP": "时间戳", "TIME_INTERVAL": "时间间隔", "TIME_SPAN": "数据跨度", "TIME_START": "开始时间", "TIME_ZONE": "时区", "TOTAL_DISCHARGE_TIME": "总放电时间", "TOTAL_USE_TIME": "总使用时间", "TRAINING_MODE": "培训模式", "TYPE": "类型", "ToggleChargingType2": "切换类型2充电过程", "TogglePhases": "切换阶段", "TotalPower": "总功率", "Type2Locked": "2型插头锁定", "USABLE_CAPACITY": "可用容量[啊]", "USABLE_REMAINING_CAPACITY": "可用剩余容量[Ah]", "USED_CHARGE_LIMIT": "使用收费限额[W]", "USED_DISCHARGE_LIMIT": "使用的排放限值[W]", "UTC_TIME": "时间UTC", "U_BAT": "电池电压", "U_DCL": "电压到逆变器", "VALUE": "价值", "VERSION": "版本", "VERSION_MAIN": "主版本", "VERSION_PIC": "PIC版本", "VOLTAGE_L1": "L1 电压", "VOLTAGE_L2": "L2 电压", "VOLTAGE_L3": "L3 电压", "VOLTAGE_MONITORING_SLOPE_DOWN": "电压监测斜率下降", "VOLTAGE_MONITORING_SLOPE_UP": "电压监测斜率上升", "VOLTAGE_MONITORING_THRESHOLD_BOTTOM": "电压监测阈值底部", "VOLTAGE_MONITORING_THRESHOLD_TOP": "电压监测阈值顶部", "WB": "壁装箱", "WB_DISCHARGE_BAT_UNTIL": "B. 通过隔离墙的包袱", "WB_ENFORCE_POWER_ASSIGNMENT": "B. 通过挂图的预防电池的释放", "WEATHER_REGULATED_CHARGE_ENABLED": "启用天气调节收费", "column_interval": "轮询间隔", "column_tag": "请求标签名称", "e3dc-rscp adapter settings": "e3dc-rscp的适配器设置", "e3dc_ip": "E3/DC IP地址", "e3dc_port": "E3/DC端口", "hybridModeSupported": "支持混合模式", "installedBatteryCapacity": "电池装机容量[Wh]", "lazy_setstate": "惰性 setState() 调用", "maxAcPower": "最大交流电力[W]", "maxBatChargePower": "最大战斗充电功率[W]", "maxBatDischargPower": "最大电池放电功率[W]", "maxChargePower": "最大充电功率[W]", "maxDischargePower": "最大放电功率[W]", "maxFbcChargePower": "最大FCB充电功率[W]", "maxFbcDischargePower": "最大FCB放电功率[W]", "maxPvPower": "最大FCB放电功率[W]", "maxStartChargePower": "最大启动充电功率[W]", "maxStartDischargePower": "最大启动放电功率[W]", "maxindex_bat": "蝙蝠（电池）", "maxindex_dcdc": "DCDC（电池逆变器）", "maxindex_pm": "index2（版本2个时期）", "maxindex_pvi": "PVI（电源逆变器）", "maxindex_wb": "WB（Wallbox）", "minStartChargePower": "最小启动充电功率[W]", "minStartDischargePower": "最小启动放电功率[W]", "options": "选项", "periods_v1": "闲置时期1", "periods_v1_tooltip": "空闲时期1版，如旧的E3/DC门户网站所示。在同一天不支持超过一个时期。", "periods_v1v2": "建议仅使用一个空闲时期版本之一，因为它们以非平凡的方式相互影响。", "periods_v2": "空闲时期2版2", "periods_v2_tooltip": "如新的E3/DC门户网站所示，在2024年，引入了空闲时期2版。在同一天可能有多个时期。", "polling_interval_long": "轮询间隔长[h]", "polling_interval_medium": "轮询间隔介质[m]", "polling_interval_short": "轮询间隔短[s]", "polling_intervals": "轮询间隔", "portal_password": "E3/DC门户密码", "portal_user": "E3/DC门户用户", "query_bat": "EMS(能源管理系统)", "query_db": "数据库(数据库)", "query_dcdc": "DCDC（电池逆变器）", "query_ems": "EMS(能源管理系统)", "query_ep": "EMS(能源管理系统)", "query_info": "INFO（信息）", "query_pm": "PM（功率计）", "query_pvi": "EMS(能源管理系统)", "query_sys": "系统(系统)", "query_wb": "WB(壁盒)", "recommendedMinChargeLimit": "建议最低收费限额[W]", "recommendedMinDischargeLimit": "建议最低排放限值[W]", "rscp_password": "E3/DC RSCP密码", "send_tuple_delay": "元组发送延迟[s]", "setidleperiod_delay": "SET_IDLE_PERIOD延迟[s]", "setpower_interval": "SET_POWER重新发送间隔[s]", "startChargeDefault": "启动收费默认值[W]", "startDischargeDefault": "启动放电默认值[W]", "title_connection": "设置E3/DC连接", "title_intervals": "设置查询和重新发送的时间间隔", "title_maxindex": "最大限度。组件数量（用于初始化）", "title_misc": "各种各样的", "title_namespaces": "选择E3/DC命名空间以查询数据", "title_polling_intervals": "微调数据轮询间隔", "title_polling_intervals_table": "每个 RSCP 标签的轮询间隔" }