{
    "_configDescription": "There is nothing mandatory to configure. Please change the intervals only when you are sure that this is what you need",
    "_deviceStatusRefreshInterval": "device status refresh interval",
    "_discoveredDevices": "Discovered Devices",
    "_discoveredDevicesHint": "All discovered devices (auto and manual) are shown below:",
    "_extendedLogging": "Extended Logging enabled",
    "_extendedLoggingDescription": "Extended Logging prints all the data received by the device to the log  with level info. As this produces a huge log spamming it is recommended to turn this on, only when needed and turnoff again afterwards.",
    "_manualIpAddresses": "Manual IP Addresses",
    "_manualIpHint": "You can add IP addresses here for devices that were not auto-discovered.",
    "_networkHint": "Windows users: You may need to select your IP address manually, as listening on all interfaces may not work reliably.",
    "_networkInterface": "Network Interface",
    "_scanMode": "Device discovery mode",
    "_scanModeInterval": "Scan in interval",
    "_scanModeNever": "Never scan",
    "_scanModeOnce": "Scan once at startup",
    "_searchInterval": "Search interval",
    "datapoint.bleVersionHard": "Bluetooth Low Energy Hardware Version",
    "datapoint.bleVersionSoft": "Bluetooth Low Energy Software Version",
    "datapoint.ip": "IP address of the Lamp",
    "datapoint.model": "Specific model of the Lamp",
    "datapoint.wifiVersionHard": "WiFi Hardware Version",
    "datapoint.wifiVersionSoft": "WiFi Software Version",
    "govee-local adapter settings": "Adapter settings for govee-local",
    "searchIntervalHint": "Scan interval in seconds (only relevant if mode is 'Scan in interval')"
}