[
	{
		"jsonrpc": "2.0",
		"result": {
			"state_message": "Printer is ready",
			"klipper_path": "/home/pi/klipper",
			"config_file": "/home/pi/klipper_config/printer.cfg",
			"software_version": "v0.9.1-140-ge68cf08d",
			"hostname": "WLAN-OctoPI",
			"cpu_info": "4 core ARMv7 Processor rev 4 (v7l)",
			"state": "ready",
			"python_path": "/home/pi/klippy-env/bin/python",
			"log_file": "/tmp/klippy.log"
		},
		"id": "printer.info"
	},
	{
		"jsonrpc": "2.0",
		"result": {
			"objects": [
				"webhooks",
				"configfile",
				"pause_resume",
				"gcode_macro PAUSE",
				"gcode_macro RESUME",
				"gcode_macro CANCEL_PRINT",
				"heaters",
				"heater_bed",
				"fan",
				"probe",
				"gcode_move",
				"bed_mesh",
				"gcode_macro G29",
				"menu",
				"display_status",
				"output_pin beeper",
				"print_stats",
				"virtual_sdcard",
				"query_endstops",
				"idle_timeout",
				"toolhead",
				"extruder"
			]
		},
		"id": "printer.objects.list"
	},
	{
		"jsonrpc": "2.0",
		"result": {
			"status": {
				"webhooks": {
					"state": "ready",
					"state_message": "Printer is ready"
				},
				"virtual_sdcard": {
					"progress": 0.0,
					"is_active": false,
					"file_position": 0
				},
				"filament_switch_sensor": {

				},
				"output_pin": {

				},
				"bed_mesh": {
					"mesh_max": [
						205.0,
						225.0
					],
					"mesh_matrix": [
						[
							-0.07,
							-0.04713,
							-0.042654,
							-0.0475,
							-0.054444,
							-0.058117,
							-0.055,
							-0.043426,
							-0.02358,
							0.0025,
							0.030926,
							0.055957,
							0.07
						],
						[
							-0.066574,
							-0.046672,
							-0.045315,
							-0.052377,
							-0.059988,
							-0.062544,
							-0.056698,
							-0.041363,
							-0.017714,
							0.010813,
							0.038523,
							0.05746,
							0.057407
						],
						[
							-0.052253,
							-0.04455,
							-0.048852,
							-0.057377,
							-0.064223,
							-0.065369,
							-0.058673,
							-0.04387,
							-0.022578,
							0.001708,
							0.023613,
							0.035883,
							0.029383
						],
						[
							-0.0325,
							-0.039835,
							-0.05036,
							-0.06,
							-0.065823,
							-0.066039,
							-0.06,
							-0.0482,
							-0.032274,
							-0.015,
							-0.000298,
							0.00677,
							0.0
						],
						[
							-0.011759,
							-0.032156,
							-0.047982,
							-0.058673,
							-0.064046,
							-0.064303,
							-0.060031,
							-0.052199,
							-0.042162,
							-0.031656,
							-0.022804,
							-0.01811,
							-0.020463
						],
						[
							0.006543,
							-0.021701,
							-0.040908,
							-0.052747,
							-0.05873,
							-0.060213,
							-0.058395,
							-0.054318,
							-0.048866,
							-0.042767,
							-0.036594,
							-0.030761,
							-0.025525
						],
						[
							0.02,
							-0.009218,
							-0.029372,
							-0.0425,
							-0.050298,
							-0.054126,
							-0.055,
							-0.053601,
							-0.050267,
							-0.045,
							-0.037459,
							-0.026965,
							-0.0125
						],
						[
							0.027222,
							0.003986,
							-0.014657,
							-0.029136,
							-0.039755,
							-0.046698,
							-0.050031,
							-0.049695,
							-0.045511,
							-0.037181,
							-0.024284,
							-0.006278,
							0.0175
						],
						[
							0.02784,
							0.016046,
							0.000909,
							-0.014784,
							-0.028685,
							-0.038893,
							-0.043951,
							-0.042843,
							-0.035001,
							-0.020298,
							0.000946,
							0.02797,
							0.059568
						],
						[
							0.0225,
							0.024537,
							0.013951,
							-0.0025,
							-0.019259,
							-0.031975,
							-0.0375,
							-0.033889,
							-0.020401,
							0.0025,
							0.033148,
							0.068673,
							0.105
						],
						[
							0.01287,
							0.026474,
							0.020047,
							0.003735,
							-0.014228,
							-0.027512,
							-0.031698,
							-0.024274,
							-0.004638,
							0.025905,
							0.064142,
							0.104949,
							0.141296
						],
						[
							0.001636,
							0.018315,
							0.013731,
							-0.000988,
							-0.016925,
							-0.027374,
							-0.02784,
							-0.016038,
							0.008104,
							0.042449,
							0.082648,
							0.122142,
							0.15216
						],
						[
							-0.0075,
							-0.004043,
							-0.011512,
							-0.0225,
							-0.031265,
							-0.033735,
							-0.0275,
							-0.011821,
							0.012377,
							0.0425,
							0.07429,
							0.101821,
							0.1175
						]
					],
					"profile_name": "default",
					"mesh_min": [
						10.0,
						10.0
					],
					"probed_matrix": [
						[
							-0.07,
							-0.0475,
							-0.055,
							0.0025,
							0.07
						],
						[
							-0.0325,
							-0.06,
							-0.06,
							-0.015,
							0.0
						],
						[
							0.02,
							-0.0425,
							-0.055,
							-0.045,
							-0.0125
						],
						[
							0.0225,
							-0.0025,
							-0.0375,
							0.0025,
							0.105
						],
						[
							-0.0075,
							-0.0225,
							-0.0275,
							0.0425,
							0.1175
						]
					]
				},
				"gcode": {

				},
				"temperature_fan": {

				},
				"print_stats": {
					"print_duration": 0.0,
					"total_duration": 0.0,
					"filament_used": 0.0,
					"filename": "",
					"state": "standby",
					"message": ""
				},
				"heater_bed": {
					"temperature": 23.298736858836772,
					"power": 0.0,
					"target": 0.0
				},
				"idle_timeout": {
					"state": "Idle",
					"printing_time": 0.0
				},
				"toolhead": {
					"square_corner_velocity": 5.0,
					"max_accel": 3000.0,
					"homed_axes": "",
					"estimated_print_time": 48972.450532194445,
					"max_velocity": 300.0,
					"print_time": 0.001,
					"max_accel_to_decel": 1500.0,
					"axis_minimum": [
						0.0,
						0.0,
						-5.0,
						0.0
					],
					"axis_maximum": [
						249.0,
						235.0,
						235.0,
						0.0
					],
					"position": [
						0.0,
						0.0,
						0.0,
						0.0
					],
					"extruder": "extruder"
				},
				"gcode_macro": {

				},
				"display_status": {
					"progress": 0.0,
					"message": null
				},
				"fan": {
					"speed": 0.0
				},
				"gcode_move": {
					"homing_origin": [
						0.0,
						0.0,
						0.0,
						0.0
					],
					"speed_factor": 1.0,
					"gcode_position": [
						0.0,
						0.0,
						0.0,
						0.0
					],
					"absolute_extrude": true,
					"absolute_coordinates": true,
					"position": [
						0.0,
						0.0,
						0.0,
						0.0
					],
					"speed": 1500.0,
					"extrude_factor": 1.0
				},
				"temperature_sensor": {

				},
				"configfile": {
					"config": {
						"tmc2209 extruder": {
							"uart_pin": "PC11",
							"hold_current": "0.500",
							"stealthchop_threshold": "4",
							"run_current": "0.650",
							"microsteps": "16"
						},
						"board_pins": {
							"aliases": "\nEXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,\nEXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>"
						},
						"pause_resume": {

						},
						"safe_z_home": {
							"z_hop_speed": "10.0",
							"speed": "80.0",
							"home_xy_position": "117.5,117.5",
							"z_hop": "10.0"
						},
						"output_pin beeper": {
							"pin": "EXP1_1"
						},
						"mcu": {
							"serial": "/dev/serial/by-id/usb-Klipper_stm32f103xe_30FFD8054242323413671657-if00"
						},
						"bed_mesh default": {
							"tension": "0.2",
							"min_x": "10.0",
							"min_y": "10.0",
							"y_count": "5",
							"mesh_y_pps": "2",
							"x_count": "5",
							"version": "1",
							"algo": "lagrange",
							"mesh_x_pps": "2",
							"max_y": "225.0",
							"max_x": "205.0",
							"points": "\n-0.070000, -0.047500, -0.055000, 0.002500, 0.070000\n-0.032500, -0.060000, -0.060000, -0.015000, 0.000000\n0.020000, -0.042500, -0.055000, -0.045000, -0.012500\n0.022500, -0.002500, -0.037500, 0.002500, 0.105000\n-0.007500, -0.022500, -0.027500, 0.042500, 0.117500"
						},
						"virtual_sdcard": {
							"path": "~/sdcard"
						},
						"stepper_z": {
							"position_max": "235",
							"endstop_pin": "probe:z_virtual_endstop",
							"step_pin": "PB0",
							"position_min": "-5",
							"dir_pin": "PC5",
							"step_distance": ".0025",
							"enable_pin": "!PB1"
						},
						"stepper_y": {
							"position_endstop": "0",
							"position_max": "235",
							"endstop_pin": "^PC1",
							"step_pin": "PB10",
							"homing_speed": "50",
							"dir_pin": "!PB2",
							"step_distance": ".0125",
							"enable_pin": "!PB11"
						},
						"stepper_x": {
							"position_endstop": "0",
							"position_max": "249",
							"endstop_pin": "^PC0",
							"step_pin": "PB13",
							"homing_speed": "50",
							"dir_pin": "!PB12",
							"step_distance": ".0125",
							"enable_pin": "!PB14"
						},
						"static_digital_output usb_pullup_enable": {
							"pins": "!PC13"
						},
						"heater_bed": {
							"control": "pid",
							"pid_kp": "64.890",
							"sensor_pin": "PC3",
							"heater_pin": "PC9",
							"sensor_type": "NTC 100K beta 3950",
							"pid_kd": "549.943",
							"pid_ki": "1.914",
							"min_temp": "0",
							"max_temp": "130"
						},
						"printer": {
							"max_velocity": "300",
							"max_z_velocity": "5",
							"kinematics": "cartesian",
							"max_accel": "3000",
							"max_z_accel": "100"
						},
						"gcode_macro RESUME": {
							"rename_existing": "BASE_RESUME",
							"default_parameter_e": "1",
							"gcode": "\nG91\nG1 E{E} F2100\nG90\nRESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1\nBASE_RESUME"
						},
						"gcode_macro PAUSE": {
							"rename_existing": "BASE_PAUSE",
							"default_parameter_e": "1",
							"default_parameter_y": "230",
							"default_parameter_x": "230",
							"default_parameter_z": "10",
							"gcode": "\nSAVE_GCODE_STATE NAME=PAUSE_state\nBASE_PAUSE\nG91\nG1 E-{E} F2100\nG1 Z{Z}\nG90\nG1 X{X} Y{Y} F6000"
						},
						"fan": {
							"pin": "PA8"
						},
						"tmc2209 stepper_z": {
							"uart_pin": "PC10",
							"hold_current": "0.500",
							"stealthchop_threshold": "5",
							"run_current": "0.580",
							"microsteps": "16"
						},
						"tmc2209 stepper_x": {
							"uart_pin": "PB15",
							"hold_current": "0.500",
							"stealthchop_threshold": "250",
							"run_current": "0.580",
							"microsteps": "16"
						},
						"tmc2209 stepper_y": {
							"uart_pin": "PC6",
							"hold_current": "0.500",
							"stealthchop_threshold": "250",
							"run_current": "0.580",
							"microsteps": "16"
						},
						"bed_mesh": {
							"horizontal_move_z": "5",
							"mesh_pps": "2,2",
							"mesh_min": "10, 10",
							"mesh_max": "205, 225",
							"fade_start": "1.0",
							"probe_count": "5,5",
							"speed": "100",
							"relative_reference_index": "5"
						},
						"display_status": {

						},
						"display": {
							"click_pin": "^!EXP1_2",
							"cs_pin": "EXP1_7",
							"encoder_pins": "^EXP1_5, ^EXP1_3",
							"lcd_type": "st7920",
							"sid_pin": "EXP1_8",
							"sclk_pin": "EXP1_6"
						},
						"gcode_macro CANCEL_PRINT": {
							"rename_existing": "BASE_CANCEL_PRINT",
							"gcode": "\nTURN_OFF_HEATERS\nCLEAR_PAUSE\nSDCARD_RESET_FILE\nBASE_CANCEL_PRINT"
						},
						"bltouch": {
							"sensor_pin": "^PC2",
							"control_pin": "PA1",
							"pin_move_time": "0.4",
							"y_offset": "-8",
							"x_offset": "-41",
							"z_offset": "2.01"
						},
						"gcode_macro G29": {
							"gcode": "\nBED_MESH_CLEAR\nBED_MESH_CALIBRATE\nBED_MESH_OUTPUT"
						},
						"extruder": {
							"control": "pid",
							"pid_kp": "22.668",
							"sensor_type": "EPCOS 100K B57560G104F",
							"sensor_pin": "PA0",
							"nozzle_diameter": "0.400",
							"heater_pin": "PC8",
							"pressure_advance": "0.48",
							"max_extrude_only_distance": "120.0",
							"step_pin": "PB3",
							"pid_kd": "112.207",
							"min_temp": "0",
							"pid_ki": "1.145",
							"filament_diameter": "1.750",
							"dir_pin": "!PB4",
							"max_temp": "250",
							"step_distance": "0.002398",
							"enable_pin": "!PD2"
						}
					},
					"save_config_pending": false
				},
				"extruder": {
					"pressure_advance": 0.48,
					"target": 40.0,
					"smooth_time": 0.04,
					"power": 0.010654141978730249,
					"temperature": 40.033073117865676
				}
			},
			"eventtime": 48969.272864392
		},
		"id": "printer.objects.status"
	}
]