{
    "A detailed documentation with explanations and all further information can be found on our GitHub page:": "可以在我们的 GitHub 页面上找到包含解释和所有进一步信息的详细文档：",
    "Active": "活性",
    "Adapter Instructions": "适配的说明",
    "Adapter Instructions:": "适配器说明：",
    "Adapter: Log Parser": "适配器：日志分析程序",
    "Add CSS in JSON": "在 JSON 中添加 CSS",
    "Add CSS to JSON Log": "将CSS添加到JSON日志",
    "Advanced Settings": "高级的设置",
    "Blacklist": "的黑名单",
    "Blacklist Expressions": "黑名单上的表情",
    "Blacklist Instructions": "黑名单的说明",
    "Blacklist expressions": "黑名单表达式",
    "Clean": "干净的",
    "Column order for JSON table": "列顺序启动表",
    "Columns for JSON table": "列的启动表",
    "Comment": "评论",
    "Date": "日期",
    "Date format": "日期格式",
    "Dateformat": "日期格式",
    "Detailed filter instructions": "详细的过滤的指令",
    "English": "英语",
    "Examples (without quotes): '[# entries]', '(#) ', '# entries: '": "示例（不带引号）：'[# entries]'、'(#) '、'# entries: '",
    "Expert Settings": "专家设置",
    "Expert settings": "专家设置",
    "Filter Rules (Log Parser)": "过滤规则(日志Parser)",
    "Filter/Parser Rules": "筛选器/解析器规则",
    "For each set filter (rule), states are created under 'logparser.[instance].filters'.": "对于每个组过滤器(规则)，各国下创建'logparser.[实例].过滤器'.",
    "Further Settings": "进一步设置",
    "General": "一般",
    "German": "德",
    "Global Blacklist": "全球的黑名单",
    "Global blacklist": "全球黑名单",
    "Here you can change the order of the columns. As additional column ts (timestamp) is always added. In VIS etc. simply hide it if necessary.": "您可以在此处更改列的顺序。作为附加列 ts（时间戳）总是被添加。在 VIS 等中，如有必要，只需将其隐藏。",
    "Here you can define the update interval of the data points. For performance reasons, it is not recommended to select a poll value that is too low. Less than two seconds cannot be selected.": "您可以在此处定义数据点的更新间隔。出于性能原因，不建议选择太低的 poll 值。不能选择小于两秒的时间。",
    "How many different JSON tables do you need": "您需要多少个不同的 JSON 表",
    "If enabled: sorts the log entries in descending order, i.e. newest on top. If disabled: sorts the log entries ascending, so oldest on top.": "如果启用：按降序对日志条目进行排序，即最新的在最上面。如果禁用：按升序对日志条目进行排序，因此最旧的在最上面。",
    "In the filters, today's or yesterday's date can be replaced by 'Today' or 'Yesterday' in the date format for using hash character (#). Other terms can be defined here instead of 'Today'/'Yesterday'.": "在过滤器中，今天或昨天的日期可以用日期格式中的“今天”或“昨天”代替，以使用哈希字符 (#)。可以在此处定义其他术语而不是“今天”/“昨天”。",
    "Instance": "实例",
    "Instructions": "指令",
    "Interval for updating states": "间隔时间，用于更新国家",
    "IntroTxt1": "这适配器能够被用于分析的记录输出的所有适配器(包括脚本的JS适配器)。",
    "IntroTxt2": "只是定义的根据规则在这里，在设置上的'析程序的规则(筛选)'tab。 在安装期间，几个规则是已经设定作为例子。",
    "Logs generated by the JavaScript adapter start with 'script.js.Script_Name:'. If this option is enabled, they are automatically removed.": "JavaScript 适配器生成的日志以“script.js.Script_Name:”开头。如果启用此选项，它们将被自动删除。",
    "Max": "Max",
    "MaxTxt": "最大数量的日志条目保留在该国(老条目被删除了)。 请不要设置一个太大的数字，数量越大，更多的负载的适配器并因此你ioBroker服务器。 一个数字的100个已被证明是良好的。",
    "Maximum number of log entries": "最大数量的日志条目",
    "Merge": "合并",
    "MergeTxt": "这个文本是摆在面前的每个日志，如果合并激活。 #字然后被替换的日志数量有相同的内容。",
    "Name": "名称",
    "NumJsonTablesTxt1": "与此选择，其他国家可以创造出为计表中可见。 这些允许交换机之间的个别过滤器中的一个对照表(例如'Homematic','警告','错误'等等)， 然后将这些动态产出在这一表格。",
    "NumJsonTablesTxt2": "在这里指定数量的不同JSON表在这里你需要这个。 这些都是下创建的'可视化。表1','可视化。表2'，等等。 停用：输入0(那么这些其他国家没有创建)。",
    "NumJsonTablesTxtLabel": "对于有多少不同的JSON表你需要这个吗？",
    "Number": "数量",
    "Number (0 = deactivated)": "数(0=停用)",
    "Number of JSON tables used in VIS": "数象表中使用的对",
    "OrderTxt": "在这里你可以改变的顺序列。 作为额外的列ts(timestamp)始终加入。 在对等。 只是隐藏它，如果有必要的。",
    "Other settings": "其他设置",
    "Output for 'Today'": "输出\"今天\"",
    "Output for 'Yesterday'": "输出为昨天",
    "Parser Rules (Filter)": "析程序的规则(筛选)",
    "Parser-Rules (filter)": "解析器规则（过滤器）",
    "ParserRules.Welcome": "欢迎使用Log Parser适配器。",
    "Prefixed text (# is replaced by number)": "前缀文本（#被数字代替）",
    "Prepended text (# is replaced by number)": "添加的案文(#替换为数)",
    "Quantity": "数量",
    "Remove 'script.js.Script_Name'": "删除'script.js.Script_Name'",
    "Remove PID": "删除PID",
    "Remove only script.js": "仅删除 script.js",
    "Remove script.js.Script_Name": "删除 script.js.Script_Name",
    "Remove script.js.Script_Name:": "删除script.js.Script_Name：",
    "RemovePidTxt": "Js控制器2.0版的或更高的增加PID在括号中，以前的记录，例如'(12234)终止：没有理由'. 有了这个选项Pid包括括号内，如(1234)，可以从中删除的日志线路。",
    "RemoveScriptJsTxt": "JavaScript适配器生成的日志以'script.js.Script_Name：'开头。",
    "Replace date with 'Today' / 'Yesterday'": "替换的日期与'今天，'/'昨天",
    "Replace date with 'Today' / 'Yesterday':": "将日期替换为“今天”/“昨天”：",
    "ReplaceDateTxt": "在过滤器，可以取代今天或昨天的日期与'今天或昨天的日期格式列通过使用哈希字(#). 在这些领域，其他条款而不是\"今天\"/'昨天可以定义。",
    "Seconds": "几秒钟",
    "Select accordingly": "相应的选择",
    "Severity": "严重性",
    "Sort descending": "降序排列",
    "Sort descending (newest on top)": "按降序排序(最新的顶上)",
    "SortTxt": "如果活化：各种各样的日志项目的排序，最新的顶部。 如果停用:各种各样的日志条目在上升顺序的，即最早在上面。",
    "Sorting": "排序",
    "Specify here the number of different JSON tables in which you need this. These will be created under 'visualization.table1', 'visualization.table2', etc. To disable: enter 0 (then these additional data points will not be created).": "在此处指定您需要它的不同 JSON 表的数量。这些将在“visualization.table1”、“visualization.table2”等下创建。要禁用：输入 0（然后将不会创建这些额外的数据点）。",
    "Start": "开始",
    "Text": "文本",
    "Text for 'Merge' (combine logs):": "“合并”文本（合并日志）：",
    "Text for 'Merge' Logs": "案文为\"合并\"的日志",
    "Text for Today": "案文供今天",
    "Text for Yesterday": "文本昨天",
    "The js controller partly adds the PID in brackets to the front of logs, e.g. '(12345) Terminated: Without reason'. Enabling this option removes the PIDs including brackets, e.g. '(12345)', from the log lines.": "js controller 将括号中的 PID 部分添加到日志的前面，例如'(12345) 终止：无故'。启用此选项会删除包括括号的 PID，例如“(12345)”，来自日志行。",
    "The maximum number of log entries that will be kept in the datapoints (older ones will be removed). Please do not set too high a number, the larger, the more load for the adapter and thus your ioBroker server. A number of 100 has worked well.": "将保留在数据点中的最大日志条目数（旧的将被删除）。请不要设置太高的数字，越大，适配器的负载就越大，因此您的 ioBroker 服务器。 100 个数字效果很好。",
    "This can be used to create additional data points for output as a JSON table in VIS, with which it is possible to switch between the individual filters in a VIS table (e.g. 'Homematic', 'Warnings', 'Errors' etc.), which are then dynamically output in this one table in each case.": "这可用于创建附加数据点以在 VIS 中作为 JSON 表输出，使用它可以在 VIS 表中的各个过滤器之间切换（例如“Homematic”、“Warnings”、“Errors”等），然后在每种情况下在这个表中动态输出。",
    "This text is prepended to each log line when merge is enabled. The # character is then replaced by the number of logs with the same content. Special characters like [](){} are allowed.": "启用合并时，此文本将添加到每个日志行之前。然后 # 字符将替换为具有相同内容的日志数。允许使用 [](){} 等特殊字符。",
    "Update Interval": "更新的时间间隔",
    "Update interval: Update data points": "更新间隔：更新数据点",
    "Version": "版",
    "Visualization": "可视化",
    "Welcome to Log-Parser adapter": "欢迎使用 Log-Parser 适配器",
    "Whitelist AND": "白名单和",
    "Whitelist OR": "白名单或",
    "With this you can add additional CSS in the JSON.": "有了它，您可以在 JSON 中添加额外的 CSS。",
    "cssJSON_1": "这使您可以将CSS添加到JSON。",
    "cssJSON_2": "在以下示例中，所有选项均被禁用：",
    "cssJSON_3": "在以下示例中，启用了所有选项：",
    "cssJSON_4": "请注意CSS类，例如<code> logDate </ code>，<code> logSeverity </ code>等，它们允许您在CSS中分别设置这些值的格式。",
    "cssJSON_5": "另外，根据日志级别（警告，错误等），有<code> logWarn </ code>，<code> logError </ code>等作为CSS类。<br>在上述示例中，",
    "date, from, message, severity": "日期、发件人、消息、严重性",
    "date, from, severity, message": "日期，从，严重性，消息",
    "date, message, from, severity": "日期、消息、来源、严重性",
    "date, message, severity, from": "日期、消息、严重性、从",
    "date, severity, from, message": "日期、严重性、发件人、消息",
    "date, severity, message, from": "日期、严重性、消息、来自",
    "expandHelpTxt": "提示：单击此文本正上方的蓝色条以显示帮助。",
    "from, date, message, severity": "从、日期、消息、严重性",
    "from, date, severity, message": "从、日期、严重性、消息",
    "from, message, date, severity": "来自、消息、日期、严重性",
    "from, message, severity, date": "来自，消息，严重性，日期",
    "from, severity, date, message": "来自，严重性，日期，消息",
    "from, severity, message, date": "来自，严重性，消息，日期",
    "message, date, from, severity": "消息、日期、来源、严重性",
    "message, date, severity, from": "消息、日期、严重性、来自",
    "message, from, date, severity": "消息、发件人、日期、严重性",
    "message, from, severity, date": "消息，来自，严重性，日期",
    "message, severity, date, from": "消息、严重性、日期、自",
    "message, severity, from, date": "消息，严重性，从，日期",
    "severity, date, from, message": "严重性、日期、来源、消息",
    "severity, date, message, from": "严重性、日期、消息、来自",
    "severity, from, date, message": "严重性、起始日期、消息",
    "severity, from, message, date": "严重性、发件人、消息、日期",
    "severity, message, date, from": "严重性、消息、日期、自",
    "severity, message, from, date": "严重性、消息、来源、日期",
    "updateIntTxt": "新进入的记录条目是收集并且经常写入国家。 这是限定的时间间隔。 注：该国仅仅是更新，如果已有所改变。 然而，从业绩的观点，它不是有意义的设定的时间间隔太短，不超过2秒钟是不允许的。",
    "Remove PID:": "删除 PID：",
    "Remove (COMPACT):": "删除（压缩）：",
    "If a adapter running in compact mode, it will add the word compact in brackets to the front of logs, e.g. '(COMPACT) handleConnectionInfo'. Enabling this option removes '(COMPACT)' from the log lines.": "如果适配器以紧凑模式运行，它会在日志前面的括号中添加紧凑一词，例如'（紧凑型）handleConnectionInfo'。启用此选项将从日志行中删除“(COMPACT)”。",
    "Remove (COMPACT)": "删除（压缩）",
    "How many different JSON tables do you need?": "您需要多少个不同的 JSON 表？",
    "Choose the format of the date in the tables (e.g. #DD.MM.# hh:mm)": "选择表格中日期的格式（例如#DD.MM.# hh:mm）",
    "Empty after days": "几天后空"
}