{
	"lorawan adapter settings": "Adapter settings for lorawan",
	"mainSettings": "Main Settings",
	"ServersettingsHeader": "Serversettings",
	"Serverinformation": "Set the main communication settings to your server",
	"ipUrl": "url or ip of the server",
	"ipUrlTooltip": "input the ip-address, or the url you want to connect to",
	"port": "port",
	"portTooltip": "input the port for the connection",
	"SSL": "SSL",
	"sslTooltip": "if your connection uses ssl, please enable this checkbox (hppts instead http is used)",
	"AuthenticationHeader": "Authenticationsettings",
	"AuthenticationInformation": "Set the authentication for your server (if needed)",
	"username": "username",
	"usernameTooltip": "input your username",
	"password": "password",
	"passwordTooltip": "input you password",
	"OriginHeader": "Origensettings",
	"OriginInformation": "Set the origin of the expected data",
	"origin":"origin",
	"originTooltip": "select the origin of your data",
	"notificationActivation": "notification activation",
	"notificationTooltip": "activate or deactivate the notification",
	"downlinkConfig": "Donwlink-konfiguration",
	"name": "name",
	"nameTooltip": "insert the name of the state, for this dowlink",
	"portDownlink": "port",
	"portDownlinkTooltip": "input the port you want to send in the downlink",
	"priority": "priority",
	"priorityTooltip": "input the priority you want to send in the downlink",
	"type": "type",
	"typeTooltip": "select the type of input you like to chose",
	"confirmed": "confirmed",
	"confirmedTooltip": "if you like to send the download with confirmed message enable this option",
	"front": "front value",
	"frontTooltip": "insert the front-value, wich will be set to the downlink (value must be in hex - exept type string)",
	"end": "end value",
	"endTooltip": "insert the end-value, wich will be set to the downlink (value must be in hex - exept type string)",
	"lengthInByte": "length of state (byte)",
	"lengthInByteTooltip": "insert the length of the state in bytes",
	"on": "on",
	"onTooltip": "insert the value you want to send if you set the state to true",
	"off": "off",
	"offTooltip": "insert the value you want to send if you set the state to false",
	"onClick": "on click",
	"onClickTooltip": "insert the value you want to send if you set the state to true (button click)",
	"multiplyfaktor": "multiplyfaktor",
	"multiplyfaktorTooltip": "insert the faktor you want to multiply your data (eg. 60 for input 1(min) => 60s)",
	"unit": "unit",
	"unitTooltip": "insert the unit for your value",
	"deviceType": "device-type",
	"expertSettings": "Expert-Settings",
	"enabled & collect": "enabled & collect",
	"deviceTypeTooltip": "insert the name of the device type, this config is valid. (eg. Dragino XY also matches Dragino)",
	"sendWithUplink": "send with uplink",
	"sendWithUplinkTooltip": "choose your send mode for configs with the desired devicetype",
	"decimalPlaces": "decimal places",
	"decimalPlacesTooltip": "select the desired numberof decimal places",
	"downlinkConfigMainHeader": "main downlink config",
	"downlinkConfigSubHeader": "individual downlink config",
	"swap": "little endian (sawp byteorder)",
	"swapTooltip": "swap the byteoder of the input",
	"no crc": "no crc adding",
	"crc": "checksum (crc 16)",
	"crcTooltip": "append the crc16 to your data",
	"String": "String",
	"limitMin": "limit min.",
	"limitMinTooltip": "limits the possibility of inputs in negative direction",
	"limitMinValue": "min. value",
	"limitMinValueTooltip": "input the limit in negative direction",
	"limitMax": "limit max.",
	"limitMaxTooltip": "limits the possibility of inputs in positive direction",
	"limitMaxValue": "max. value",
	"limitMaxValueTooltip": "input the limit in positive direction",
	"keepalive": "keepalive",
	"keepaliveTooltip": "input the time in seconds for keepalive function",
	"unused": "unused",
	"downlinkConfigHeader": "Add your device specific downlinks",
	"customConfig": "\"Custom\"-Konfiguation",
	"customConfigHeader": "Add a specific custom Object to each decoded state",
	"customJson": "Objekt für den \"Custom\"-Bereich im \"Common\" Objekt",
	"customJsonTooltip": "Fügen Sie ein Objekt hinzu, welches in common.custom geschrieben wird.",
	"customJsonInformation" : "With this function it is possible to add your own custom entries to the decoded states. Just input the desired json content in active function.",
	"customDecodedJsonActive" : "\"decoded.custom\"-JSON",
	"customJsonActiveTooltip" : "With this function it is possible to add your own custom entries to the decoded states",
	"customDesciption": "The folwing picture shows you an example for data in the JSON-EDITOR. For more informations use the documentation.",
	"customDescriptionImageTooltip": "Please fill the Editor with desired json you like to have in common.custom object of the decoded states.",
	"customConfigurationJsonActive" : "\"configuration-custom\"-JSON",
	"customConfigurationJsonActiveTooltip" : "With this function you add the desired JSON on the custom entrie from the configuration channel",
	"customControlJsonActive" : "\"control-custom\"-JSON",
	"customControlJsonActiveTooltip" : "With this function you add the desired JSON on the custom entrie from the control channel",
	"customDeleteDesciption": "To delete an entry, please enter the entry with content \"null\".",
	"customDeleteDescriptionImageTooltip": "Information about removing an existing entry.",
	"notification": "notification",
	"no notification": "no notification",
    "BridgePanel": "Bridge",
    "BridgeInformation": "Main configuration for bridge via mqtt discovery",
    "MQTTInstance": "MQTT Instance",
    "DeviceIdentifiers": "Device Identifiers",
    "DeviceIdentifierTooltip": "Identifieres for the HA Device",
    "separator": "separator",
    "separatorTooltip": "choose a separator for the identifiers",
    "applicationId": "Applicaion Id",
	"applicationName": "Application Name",
	"usedApplicationName": "Used Application Name (common.name)",
	"deviceEUI": "Device EUI",
	"deviceId": "Device Id",
	"usedDeviceId": "Used Device Id (common.name)",
	"no": "none",
	"space": "space",
	"underline": "underline",
	"minus": "minus",
	"BridgeHeader": "Bridge to a Foreign System",
	"_DeviceIdentifierConfiguredDiscription": "Result of configured Topic: ",
	"_DeviceIdentifierDiscription": "Configure the identifiers to create an MQTT topic for a state. You can select multiple device identifiers, separated by the separator.",
	"_DeviceIdentifierExampleDiscription": "Example for configured Topic: ",
	"_NoLoRaWAN": "The State is not in the right LoRaWAN instance",
	"publishTooltip": "publish the state on Bridge",
	"subscribeTooltip": "subscribe the state from Bridge",
	"BridgeStateHeader": "Define States for Discovery Topic",
	"BridgeStateInformation": "Here you can define an array of states, that will be set a Topic for Discovery. (Wildcards are possible too)",
	"Application": "Application",
	"Device": "Device",
	"Folder": "Folder",
	"State": "State",
	"BridgeType": "Bridge Type",
	"BridgeTypeTooltip": "Select the Type of the foreign System",
	"BridgeTypeOff": "off",
	"BridgeTypeHA": "Home Assistant",
	"BridgeTypeSH": "Smart Home",
	"LorawanOff": "off",
	"RefreshDiscoveryCronJob": "Discover Cycle",
	"RefreshDiscoveryCronJobTooltip": "insert the cronjob for refreshing the discovery",
	"ClimateHeader": "Define States for Climate Entity",
	"ClimateInformation": "Here you can define an array of Climate definitions",
	"ClimateNameText": "Entityname",
	"ClimateTargetTemperatureText": "Target Temperature",
	"ClimateActTemperatureText": "Target Temperature",
	"ClimateModeTemperatureText": "Mode",
	"_DiscoveredIds": "Discoverd Ids",
	"_PublishedIds": "Published Ids",
	"_SubscribedTopics": "Subscribed Topics",
	"_Deviceinformations": "Deviceinformations",
	"NoBridgeConfiged": "There is no bridge configed !!!",
	"EnableRefresh": "cyclic Discover",
	"EnableRefreshTooltip": "enable to discover in a cyclic cron",
	"* Not Present (Virtual)": "* Not Present (Virtual)",
	"BridgenotificationActivation": "notification activation",
	"BridgenotificationTooltip": "activate or deactivate the notification",
	"all notifications": "all notifications",
	"bridge connection": "connection notifications",
	"new discover": "discover notifications",
	"device online offline": "device state notifications",
	"no notifications": "nonotifications",
	"LoRaWAN Network Service is connected": "LoRaWAN Network Service is connected",
	"LoRaWAN Network Service is disconnected": "LoRaWAN Network Service is disconnected",
	"LoRaWAN device is back online": "The following LoRaWAN device is back online",
	"LoRaWAN device is offline": "The following LoRaWAN device is offline",
	"connection to bridge is activ": "connection to bridge is activ",
	"connection to bridge is closed": "connection to bridge will be closed",
	"new device discovered": "new device discovered",
	"Adapter will be stoped": "The LoRaWAN Bridge Adapter will be stoped",
	"BridgeEnum": "Bridge Enum",
	"BridgeEnumTooltip": "Select an enum, that is used for bringing foreign states to the bridge",
	"BridgeConnectionTest": "connectiontest",
	"BridgeConnectionTestTooltip": "cklick this button, to check to connection to your bridge",
	"no connection to bridge": "❌ no connection",
	"connection to bridge ok": "✅ connection OK",
    "BridgeLoRaPanel": "Bridge LoRaWAN",
    "BridgeLoRaConfigHeader": "Settigs for the Lorawan Bridge",
    "BridgeForeignPanel": "Bridge Foreign",
    "BridgeForeignConfigHeader": "Settings for the foreign states",
	"BridgeLoRaHeader": "Definition of deviceindetifier",
	"BridgeForeignHeader": "Select of Bridge Enum",
	"_BridgeEnumDiscription": "Select a Enum tha is used for setting states into Bridge.\nThe name of the device is following this priorities:\n1. Devicename\n2. Channelname\n3. Namespace of state",
	"ClimateForeignHeader": "Define States for Climate Entity",
	"ClimateForeignInformation": "Here you can define an array of Climate definitions",
	"VirtualMode": "Virtual Mode",
	"VirtualModeTooltip": "Activate, if a mode id is not present",
	"HumidifierHeader": "Define States for a Humidifier Entity",
	"HumidifierInformation": "Here you can define an array of Humidifier definitions",
	"HumidifierNameText": "Entityname",
	"Humidifier": "Humidifier",
	"HumidifierTooltip": "humidifier / dehumidifier",
	"WithAct": "with Act-State",
	"WithActTooltip": "activate for setting id for actual value",
	"HumidifierOnOffText": "On / Off",
	"HumidifierTargetText": "Target humidity",
	"HumidifierActText": "Actual humidity",
	"LightHeader": "Define States for a Light Entity",
	"LightInformation": "Here you can define an array of Light definitions",
	"LightNameText": "Entityname",
	"LightBrightness": "Brightness",
	"LightBrightnessTooltip": "enable to set brightness id",
	"LightColor": "Color",
	"LightColorTooltip": "enable to set color id",
	"LightOnOffText": "On / Off",
	"LightBrightnessText": "Brightness id",
	"LightColorText": "Color id",
	"LightEffects": "Effects",
	"LightEffectsTooltip": "enable to set Effects id",
	"LightEffectsText": "Effects id",
	"CoverHeader": "Define States for a Cover Entity",
	"CoverInformation": "Here you can define an array of Cover definitions",
	"CoverNameText": "Entityname",
	"CoverSeparate": "separate",
	"CoverSeparateTooltip": "selected: separate boolean states for open / close. Otherwise, one string state.",
	"CoverStop": "stop",
	"CoverOpenSignal": "limit switch for open",
	"CoverOpenSignalTooltip": "Choose a Boolean signal that indicates the open state",
	"CoverClosedSignal": "limit switch for closed",
	"CoverClosedSignalTooltip": "Choose a Boolean signal that indicates the closed state",
	"CoverStopTooltip": "An additional state for stop command",
	"CommandText": "Command ID",
	"UpText": "Up Command ID",
	"CoverDownText": "Down Command ID",
	"CoverStopText": "Stop Command ID",
	"CoverOpenText": "Open Command ID",
	"CoverCloseText": "Close Command ID",
	"CoverSignal": "Signals from limit switches",
	"CoverOpenSignalTrue": "signal true if open",
	"CoverClosedSignalTrue": "signal true if closed",
	"CoverOpenSignalTrueTooltip": "select true, if signal brings value true in cas of cover is open",
	"CoverClosedSignalTrueTooltip": "select true, if signal brings value true in cas of cover is closed",
	"SeparateIds": "separated ids for command",
	"OneString": "one string for command",
	"no command": "no command id",
	"CoverPosition": "position",
	"CoverPositionTooltip": "selected: separate id for position",
	"LockHeader": "Define States for a Lock Entity",
	"LockInformation": "Here you can define an array of Lock definitions",
	"LockNameText": "Entityname",
	"LockSeparate": "separate",
	"LockSeparateTooltip": "selected: separate boolean states for lock, unlock. Otherwise, one string state.",
	"LockOpen": "open",
	"LockOpenTooltip": "selected: separate boolean states for open",
	"LockSeparateState": "separate state",
	"LockSeparateStateTooltip": "selected: separate state for the state of the lock",
	"StateText": "State ID",
	"LockLockText": "Lock ID",
	"LockUnlockText": "Unlock ID",
	"LockOpenText": "Open ID",
	"commandForOpen": "command to open the lock",
	"commandForOpenTooltip": "set the command, that opens the lock",
	"CoverTilt": "tilt",
	"CoverTiltTooltip": "selected: separate id for tilt",
	"CoverTiltText": "Tilt ID",
	"CoverPositionText": "Position ID",
	"CoverDeviceClass": "Device Class",
	"CoverDeviceClassTooltip": "Select the desired device class",
    "CoverAwning": "awning",
    "CoverBlind": "blind",
    "CoverCurtain": "curtain",
    "CoverDamper": "damper",
    "CoverDoor": "door",
    "CoverGarage": "garage",
    "CoverGate": "gate",
    "CoverShade": "shade",
    "CoverShutter": "shutter",
    "CoverWindow": "window",
	"deviceSuffix": "device Suffix"
}