{
	"* Not Present (Virtual)": "* 不存在（虚拟）",
	"Adapter will be stoped": "LoRaWAN 桥适配器将停止",
	"Application": "应用",
	"AuthenticationHeader": "身份验证设置",
	"AuthenticationInformation": "设置服务器的身份验证（如果需要）",
	"BridgeConnectionTest": "连接测试",
	"BridgeConnectionTestTooltip": "单击此按钮，检查与您的网桥的连接",
	"BridgeEnum": "桥枚举",
	"BridgeEnumTooltip": "选择一个枚举，用于将外国国家带到桥上",
	"BridgeForeignConfigHeader": "国外的设置",
	"BridgeForeignHeader": "选择桥枚举",
	"BridgeForeignPanel": "桥外语",
	"BridgeHeader": "通往外部系统的桥梁",
	"BridgeInformation": "通过 mqtt discovery 进行桥接的主要配置",
	"BridgeLoRaConfigHeader": "洛拉万大桥的布景",
	"BridgeLoRaHeader": "设备标识符的定义",
	"BridgeLoRaPanel": "LoRaWAN桥",
	"BridgePanel": "桥",
	"BridgeStateHeader": "定义发现主题的状态",
	"BridgeStateInformation": "您可以在此处定义一组状态，这些状态将设置为发现主题。 （也可以使用通配符）",
	"BridgeType": "桥型",
	"BridgeTypeHA": "家庭助理",
	"BridgeTypeOff": "离开",
	"BridgeTypeSH": "智能家居",
	"BridgeTypeTooltip": "选择外部系统类型",
	"BridgenotificationActivation": "通知激活",
	"BridgenotificationTooltip": "激活或停用通知",
	"ClimateActTemperatureText": "目标温度",
	"ClimateForeignHeader": "定义气候实体的状态",
	"ClimateForeignInformation": "在这里您可以定义一系列气候定义",
	"ClimateHeader": "定义气候实体的状态",
	"ClimateInformation": "在这里您可以定义一系列气候定义",
	"ClimateModeTemperatureText": "模式",
	"ClimateNameText": "实体名称",
	"ClimateTargetTemperatureText": "目标温度",
	"CommandText": "命令ID",
	"CoverAwning": "棚",
	"CoverBlind": "瞎的",
	"CoverCloseText": "关闭命令ID",
	"CoverClosedSignal": "关闭限位开关",
	"CoverClosedSignalTooltip": "选择指示关闭状态的布尔信号",
	"CoverClosedSignalTrue": "如果关闭则信号为 true",
	"CoverClosedSignalTrueTooltip": "选择 true，如果在盖子关闭的情况下信号值为 true",
	"CoverCurtain": "窗帘",
	"CoverDamper": "阻尼器",
	"CoverDeviceClass": "设备类别",
	"CoverDeviceClassTooltip": "选择所需的设备类别",
	"CoverDoor": "门",
	"CoverDownText": "向下命令ID",
	"CoverGarage": "车库",
	"CoverGate": "门",
	"CoverHeader": "定义 Cover 实体的状态",
	"CoverInformation": "在这里您可以定义一组封面定义",
	"CoverNameText": "实体名称",
	"CoverOpenSignal": "打开限位开关",
	"CoverOpenSignalTooltip": "选择一个指示打开状态的布尔信号",
	"CoverOpenSignalTrue": "如果打开则信号为真",
	"CoverOpenSignalTrueTooltip": "如果盖子打开时信号值为 true，则选择 true",
	"CoverOpenText": "打开命令ID",
	"CoverPosition": "位置",
	"CoverPositionText": "职位编号",
	"CoverPositionTooltip": "已选择：位置的单独 ID",
	"CoverSeparate": "分离",
	"CoverSeparateTooltip": "selected：用于打开/关闭的单独布尔状态。否则，为一个字符串状态。",
	"CoverShade": "阴影",
	"CoverShutter": "快门",
	"CoverSignal": "来自限位开关的信号",
	"CoverStop": "停止",
	"CoverStopText": "停止命令ID",
	"CoverStopTooltip": "停止命令的附加状态",
	"CoverTilt": "倾斜",
	"CoverTiltText": "倾斜ID",
	"CoverTiltTooltip": "已选择：倾斜的单独 ID",
	"CoverWindow": "窗户",
	"Device": "设备",
	"DeviceIdentifierTooltip": "HA 设备的标识符",
	"DeviceIdentifiers": "设备标识符",
	"EnableRefresh": "循环发现",
	"EnableRefreshTooltip": "能够在循环 cron 中发现",
	"Folder": "文件夹",
	"Humidifier": "加湿器",
	"HumidifierActText": "实际湿度",
	"HumidifierHeader": "定义加湿器实体的状态",
	"HumidifierInformation": "您可以在此处定义一系列加湿器定义",
	"HumidifierNameText": "实体名称",
	"HumidifierOnOffText": "开/关",
	"HumidifierTargetText": "目标湿度",
	"HumidifierTooltip": "加湿器/除湿器",
	"LightBrightness": "亮度",
	"LightBrightnessText": "亮度 ID",
	"LightBrightnessTooltip": "启用设置亮度ID",
	"LightColor": "颜色",
	"LightColorText": "颜色编号",
	"LightColorTooltip": "启用设置颜色 ID",
	"LightEffects": "效果",
	"LightEffectsText": "效果 ID",
	"LightEffectsTooltip": "启用设置效果 ID",
	"LightHeader": "定义光实体的状态",
	"LightInformation": "在这里您可以定义一组灯光定义",
	"LightNameText": "实体名称",
	"LightOnOffText": "开/关",
	"LoRaWAN Network Service is connected": "LoRaWAN 网络服务已连接",
	"LoRaWAN Network Service is disconnected": "LoRaWAN网络服务已断开",
	"LoRaWAN device is back online": "以下 LoRaWAN 设备已重新上线",
	"LoRaWAN device is offline": "以下 LoRaWAN 设备离线",
	"LockHeader": "定义锁实体的状态",
	"LockInformation": "在这里你可以定义一个Lock定义的数组",
	"LockLockText": "锁ID",
	"LockNameText": "实体名称",
	"LockOpen": "打开",
	"LockOpenText": "开放ID",
	"LockOpenTooltip": "selected：打开的单独布尔状态",
	"LockSeparate": "分离",
	"LockSeparateState": "独立国家",
	"LockSeparateStateTooltip": "selected：锁状态的单独状态",
	"LockSeparateTooltip": "selected：锁定、解锁的单独布尔状态。否则，为一个字符串状态。",
	"LockUnlockText": "解锁ID",
	"LorawanOff": "离开",
	"MQTTInstance": "MQTT实例",
	"NoBridgeConfiged": "没有配置桥接！！！",
	"OneString": "一个命令字符串",
	"OriginHeader": "原始设置",
	"OriginInformation": "设置预期数据的来源",
	"RefreshDiscoveryCronJob": "发现周期",
	"RefreshDiscoveryCronJobTooltip": "插入 cronjob 以刷新发现",
	"SSL": "SSL协议",
	"SeparateIds": "命令的分隔 ID",
	"Serverinformation": "设置服务器的主要通信设置",
	"ServersettingsHeader": "服务器设置",
	"State": "状态",
	"StateText": "州身份证",
	"String": "细绳",
	"UpText": "向上命令ID",
	"VirtualMode": "虚拟模式",
	"VirtualModeTooltip": "如果模式 ID 不存在，则激活",
	"WithAct": "与行为状态",
	"WithActTooltip": "激活以设置实际值的 id",
	"_BridgeEnumDiscription": "选择一个用于将状态设置到 Bridge 中的枚举。\n设备的名称遵循以下优先级：\n1. 设备名称\n2. 频道名称\n3. 状态的命名空间",
	"_DeviceIdentifierConfiguredDiscription": "配置Topic的结果：",
	"_DeviceIdentifierDiscription": "配置标识符以为状态创建 MQTT 主题。您可以选择多个设备标识符，并用分隔符分隔。",
	"_DeviceIdentifierExampleDiscription": "配置主题示例：",
	"_Deviceinformations": "设备信息",
	"_DiscoveredIds": "发现的 ID",
	"_NoLoRaWAN": "状态不在正确的 LoRaWAN 实例中",
	"_PublishedIds": "已发布的 ID",
	"_SubscribedTopics": "订阅的主题",
	"all notifications": "所有通知",
	"applicationId": "应用程序 ID",
	"applicationName": "应用名称",
	"bridge connection": "连接通知",
	"commandForOpen": "打开锁的命令",
	"commandForOpenTooltip": "设置打开锁的命令",
	"confirmed": "确认的",
	"confirmedTooltip": "如果您想发送带有确认消息的下载，请启用此选项",
	"connection to bridge is activ": "与网桥的连接已激活",
	"connection to bridge is closed": "与网桥的连接将被关闭",
	"connection to bridge ok": "✅ 连接正常",
	"crc": "校验和（crc 16）",
	"crcTooltip": "将 crc16 附加到您的数据中",
	"customConfig": "“定制”-组合",
	"customConfigHeader": "将特定的自定义对象添加到每个解码状态",
	"customConfigurationJsonActive": "“配置-自定义”-JSON",
	"customConfigurationJsonActiveTooltip": "使用此函数，您可以从配置通道在自定义条目上添加所需的 JSON",
	"customControlJsonActive": "“控制-自定义”-JSON",
	"customControlJsonActiveTooltip": "使用此函数，您可以从控制通道在自定义条目上添加所需的 JSON",
	"customDecodedJsonActive": "“已解码.自定义”-JSON",
	"customDeleteDesciption": "要删除条目，请输入内容为“null”的条目。",
	"customDeleteDescriptionImageTooltip": "有关删除现有条目的信息。",
	"customDesciption": "下图显示了 JSON-EDITOR 中数据的示例。有关更多信息，请使用文档。",
	"customDescriptionImageTooltip": "请在编辑器中填写您希望在解码状态的 common.custom 对象中拥有的所需 json。",
	"customJson": "“自定义”对象-“通用”对象中的对象",
	"customJsonActiveTooltip": "使用此功能，可以将您自己的自定义条目添加到解码状态",
	"customJsonInformation": "使用此功能，可以将您自己的自定义条目添加到解码状态。只需在 active 函数中输入所需的 json 内容即可。",
	"customJsonTooltip": "Fügen Sie ein Objekt hinzu, welches in common.custom geschrieben wrd.",
	"decimalPlaces": "小数位",
	"decimalPlacesTooltip": "选择所需的小数位数",
	"device online offline": "设备状态通知",
	"deviceEUI": "设备用户界面",
	"deviceId": "设备 ID",
	"deviceSuffix": "设备后缀",
	"deviceType": "设备类型",
	"deviceTypeTooltip": "插入设备类型的名称，此配置有效。 （例如，Dragino XY 也匹配 Dragino）",
	"downlinkConfig": "下行链路配置",
	"downlinkConfigHeader": "添加您的设备特定的下行链路",
	"downlinkConfigMainHeader": "主要下行配置",
	"downlinkConfigSubHeader": "单独的下行链路配置",
	"enabled & collect": "启用并收集",
	"end": "最终值",
	"endTooltip": "插入最终值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
	"expertSettings": "专家设置",
	"front": "前值",
	"frontTooltip": "插入前值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
	"ipUrl": "服务器的 url 或 ip",
	"ipUrlTooltip": "输入ip地址，或者你想要连接的url",
	"keepalive": "保活",
	"keepaliveTooltip": "输入保活功能的时间（以秒为单位）",
	"lengthInByte": "状态长度（字节）",
	"lengthInByteTooltip": "插入状态的长度（以字节为单位）",
	"limitMax": "限制最大值",
	"limitMaxTooltip": "限制正向输入的可能性",
	"limitMaxValue": "最大限度。价值",
	"limitMaxValueTooltip": "输入正方向的极限值",
	"limitMin": "限制最小值",
	"limitMinTooltip": "限制负方向输入的可能性",
	"limitMinValue": "分钟。价值",
	"limitMinValueTooltip": "输入负方向的极限值",
	"lorawan adapter settings": "lorawan 的适配器设置",
	"mainSettings": "主要设置",
	"minus": "减",
	"multiplyfaktor": "多重因素",
	"multiplyfaktorTooltip": "插入您想要与数据相乘的因子（例如，输入 1(min) => 60s 为 60）",
	"name": "姓名",
	"nameTooltip": "为此下行链接插入州名称",
	"new device discovered": "发现新设备",
	"new discover": "发现通知",
	"no": "没有任何",
	"no command": "没有命令 ID",
	"no connection to bridge": "❌没有连接",
	"no crc": "没有添加crc",
	"no notification": "没有通知",
	"no notifications": "不通知",
	"notification": "通知",
	"notificationActivation": "通知激活",
	"notificationTooltip": "激活或停用通知",
	"off": "离开",
	"offTooltip": "如果将状态设置为 false，则插入要发送的值",
	"on": "在",
	"onClick": "点击时",
	"onClickTooltip": "如果将状态设置为 true（单击按钮），则插入要发送的值",
	"onTooltip": "如果将状态设置为 true，则插入要发送的值",
	"origin": "起源",
	"originTooltip": "选择您的数据来源",
	"password": "密码",
	"passwordTooltip": "输入您的密码",
	"port": "港口",
	"portDownlink": "港口",
	"portDownlinkTooltip": "输入你要下行发送的端口",
	"portTooltip": "输入连接的端口",
	"priority": "优先事项",
	"priorityTooltip": "输入您要在下行链路中发送的优先级",
	"publishTooltip": "在 Bridge 上发布状态",
	"sendWithUplink": "通过上行链路发送",
	"sendWithUplinkTooltip": "选择具有所需设备类型的配置的发送模式",
	"separator": "分隔符",
	"separatorTooltip": "选择标识符的分隔符",
	"space": "空间",
	"sslTooltip": "如果您的连接使用 ssl，请启用此复选框（使用 hpts 而不是 http）",
	"subscribeTooltip": "从 Bridge 订阅状态",
	"swap": "小尾数（sawp 字节顺序）",
	"swapTooltip": "交换输入的字节码",
	"type": "类型",
	"typeTooltip": "选择您想要选择的输入类型",
	"underline": "强调",
	"unit": "单元",
	"unitTooltip": "插入您的值的单位",
	"unused": "未使用",
	"usedApplicationName": "使用的应用程序名称（common.name）",
	"usedDeviceId": "使用的设备 ID（common.name）",
	"username": "用户名",
	"usernameTooltip": "输入您的用户名"
}