{ " Refreshed: ": " 刷新：", ". Please try again.": ".", "... If you miss data please authenticate again!": "...... 如果你误用数据,请再次证明!", "API Request - refresh all": "API 请求 - 全部刷新", "API Request getmeasure:": "API请求getmeasure：", "API Request getroommeasure:": "API请求getroommeasure：", "API Request homesdata": "API请求房屋数据", "API Request homesdata:": "API请求房屋数据：", "API Request homestatus sent to API each": "API请求homestatus发送到API每个", "API Request homestatus was sent to API each": "每个API请求homestatus已发送到API", "API Request homestatus:": "API请求状态：", "API Request setthermmode": "API 请求 setthermmode", "API Request setthermpoint": "API请求setthermpoint", "API Request swithhomeschedule:": "API请求swithhomeschedule：", "API Request synchomeschedule:": "API请求同步时间表：", "API Token": "API令牌", "API changes applied": "已应用API更改", "API request finished": "API请求已完成", "API request not OK:": "API请求不正确：", "API settings": "API设定", "API-Request done!": "API-请求完成！", "API-getmeasure request is missing parameters": "API-getmeasure请求缺少参数", "API-getroommeasure request is missing parameters": "API-getroommeasure请求缺少参数", "API-synchomeschedule request is missing parameters": "API-synchomeschedule 请求缺少参数", "Actual payload:": "实际有效载荷：", "Actual plan:": "实际计划：", "Actual temperature:": "实际温度：", "Adapter": "适配器", "Adapter stopped": "适配器已停止", "Anticipating": "期待", "Apply": "申请", "Authenticate with Netatmo": "使用 Netatmo 进行身份验证", "Authentication information": "认证信息", "Battery voltage:": "电池电压：", "Boiler cable not used": "未使用锅炉电缆", "Boiler cable used": "使用的锅炉电缆", "Boiler historical data was retrieved from device": "从设备检索锅炉历史数据", "Boiler historical data was retrieved from device address": "从设备地址检索锅炉历史数据", "Call API directly": "直接调用API", "Can not create channel: ": "无法创建频道：", "Can not create device: ": "无法创建设备：", "Can not get active heating plan!": "无法获得主动供暖计划！", "Can not get active mode!": "无法进入活动模式！", "Can not get active thermostat mode!": "无法获得主动恒温器模式！", "Can not save data to objects: ": "无法将数据保存到对象：", "Cannot parse stored user IDs from Telegram!": "无法从 Telegram 解析存储的用户 ID！", "Cannot write token file: ": "传真: ", "Changed schedule for your heating system to": "将加热系统的时间表更改为", "Changed the thermmode manually": "手动更改热模式", "Changed weekly schedule": "更改每周时间表", "Changes are saved now!": "更改已保存！", "Client ID from your Netatmo APP": "来自Netatmo APP的客户端ID", "Client Secret ID from your Netatmo APP": "来自Netatmo APP的客户端密钥ID", "Client-ID:": "客户编号：", "Client-Secret-ID:": "客户机密ID：", "Comfort boost requested": "要求提高舒适度", "Connection": "联系", "Connection timeout": "连接超时", "Could not change room temperature!": "无法改变室温！", "Did not get a tokencode:": "没有获得令牌代码：", "Did not get url or payload!": "没有获得URL或有效载荷！", "E-Mail": "电子邮件", "Enable / Disable Notifications": "启用/禁用通知", "Error getting new tokens from Netatmo: ": "从 Netatmo 获取新令牌时出错：", "Error on OAuth callback: ": "O Auth 呼吁挫折: ", "Error reading stored tokens: ": "装有下列文字:", "Event triggered:": "事件触发：", "Firmware:": "固件：", "General settings": "常规设置", "Get OAuth start link data: ": "Get OAuth开始连接数据: ", "Get OAuth start link: ": "Get OAuth开始联系:", "Hardware version:": "硬件版本：", "Heating Plan:": "供暖计划：", "Heating request": "加热要求", "Home ID from your Netatmo Energy installation": "Netatmo Energy安装中的家庭ID", "Home-ID:": "家庭ID：", "Home:": "家：", "Information": "资讯资讯", "Invalid Parameter": "无效的参数", "Login with Netatmo": "使用 Netatmo 登录", "Logon information": "登录信息", "Long Notifications": "长通知", "Low battery": "低电量", "Medium battery": "中号电池", "Message": "信息", "Message if battery goes low": "电池电量不足时的消息", "Message if battery goes medium": "电池电量不足时的消息", "Message if boiler anticipates": "如果锅炉预期的消息", "Message if valve creates a heating request": "阀门创建加热请求时的消息", "Message if valve lost connection": "阀门断开连接时的消息", "Message if window is open": "窗口打开时的消息", "Messages": "留言", "Mode for your heating system was set to": "您的供暖系统的模式设置为", "Mode set to home mode!": "模式设置为默认模式！", "Mode:": "模式：", "Module ID:": "模块编号：", "Name": "姓名", "Netatmo API request aborted": "Netatmo API请求中止", "Netatmo API status false": "Netatmo API 状态为假", "Netatmo API status:": "Netatmo API状态：", "No Number": "没有号码", "No tokens stored - Please use authentication in adapter config!": "如果没有储存的通行证,请在变压器上使用核证!", "Notification Style": "通知样式", "Notification only on errors": "仅在错误时通知", "Notifications": "通知", "Notifications by telegram": "电报通知", "OAuth2 authentication methode": "OAuth2认证方式", "Only one of client_id or client_secret was set, using default values!": "只有一个客户(id或客户_secret)才使用缺值!", "Password from your Netatmo Account": "您的Netatmo帐户的密码", "Password:": "密码：", "Plug is connected to boiler": "插头连接到锅炉", "Plug is not connected to boiler": "插头未连接到锅炉", "Pushover": "俯卧撑", "Pushover instance": "俯卧撑实例", "Received OAuth start message: ": "收到OAuth开端信息: ", "Refresh homestatus interval": "刷新本机状态间隔", "Refresh states every x seconds": "每x秒刷新一次状态", "Refresh whole structure:": "刷新整个结构：", "Refreshing data in progress": "正在刷新数据", "Rename": "改名", "Request is missing parameters": "请求缺少参数", "Request was sent to Netatmo Cloud": "请求已发送到 Netatmo Cloud", "Request:": "请求：", "Retrieved statistic for a specific room": "检索特定房间的统计信息", "Retrieved statistic for a specific room number": "检索特定房间号的统计信息", "Room temperature changed to ": "室温改为 ", "Roomnumber:": "房间号：", "SendMessage: ": "SendMessage: ", "Set TempChanged manually": "手动设置TempChanged", "Set room attributes": "设置房间属性", "SetTemp: ": "设置温度：", "Short Notifications": "简短通知", "Signal": "Signal的", "Signal instance": "Signal 实例", "Signal strength:": "信号强度：", "Silent Notice": "无声通知", "Somebody stopped": "有人停了下来", "Start API-request:": "启动API请求：", "Start Token-Refresh": "开始令牌刷新", "Start Token-request:": "启动令牌请求：", "Start refresh request": "开始刷新请求", "Status": "状态", "Stored tokens belong to the different client ID": "被盗用物品属于不同的客户开发协会", "Stored tokens have different scope": "被绑架者的范围不同", "Target temperature changed": "目标温度已更改", "Target temperature:": "目标温度：", "Telegram": "电报", "Telegram Receiver": "电报收件人", "Telegram instance": "电报实例", "Token OK:": "令牌确定：", "Tokens updated successfully.": "令牌更新成功。", "Update data in adapter configuration ... restarting ...": "更新适配器配置中的数据...重新启动...", "Username from your Netatmo Account": "您的Netatmo帐户的用户名", "Username:": "用户名:", "Using stored tokens to initialize ... ": "使用储存的原状...... ", "Vales": "阀门", "Waiting for the send (seconds)": "发送前等待（秒）", "Warning": "警告", "WhatsApp": "WhatsApp的", "WhatsApp instance": "WhatsApp 实例", "Wifi strength:": "无线网络强度：", "Window closed": "窗口关闭", "Window open": "窗口打开", "and not the configured scope": "a. 调整范围", "and not to the configured ID ... deleting": "[删除]", "anticipate": "预料", "apply immediately": "立即施加温度", "away": "离开", "away from home": "离开家", "changed manually": "手动更改", "cleaned everything up...": "清理一切...", "closed": "关闭", "connected": "连接的", "default mode": "默认模式", "device ID (optional)": "设备 ID（可选）", "disconnected": "断开连接", "email instance": "电子邮件实例", "email receiver": "电子邮件收件人", "email sender": "电子邮件发件人", "errors": "错误", "for your heating system": "用于您的加热系统", "frost guard": "“防冻罩”", "Frost guardian": "冰霜守护者", "full": "满的", "heating not necessary": "不需要加热", "heating requested": "要求加热", "high": "高的", "information": "资讯", "information, errors": "信息，错误", "information, warnings": "信息，警告", "information, warnings, errors": "信息，警告，错误", "low": "低的", "manually": "手动", "max": "最大限度", "medium": "中等的", "message type": "讯息类型", "netatmo-energy adapter settings": "netatmo-energy的适配器设置", "no notifications": "没有通知", "not anticipating": "没有预料", "notifications type": "通知类型", "off": "离开", "open": "打开", "read API states immediately": "立即读取API状态", "refresh": "刷新", "refresh states after (sec):": "在（秒）后刷新状态：", "save": "保存", "schedule": "'时间表'", "Scheduled": "时间表", "seconds": "秒", "select the types for notifications": "选择通知的类型", "switchhomeschedule away from home": "离开家", "switchhomeschedule frost guard": "霜卫士", "switchhomeschedule schedule": "时间表", "very low": "非常低", "warnings": "警告", "warnings, errors": "警告，错误", "Create a thermostat weekly schedule": "每周设立动荡情况", "API-createnewhomeschedule request is missing parameters": "API-增聘时间表是遗漏的参数。", "API Request createnewhomeschedule:": "导 言 3. 请求设立新的表格:", "Name of the schedule": "附表姓名", "No temperature stored in sensor tab! ": "未在传感器上储存的温度!", "Sensor actions": "补偿行动", "Check window/door status": "检查站窗口/户籍状况", "Window/Door sensor (type = boolean)": "Window/Door感器(role = #.window, #.door)", "Check value from window/door sensor": "窗户/室传感器的检查价值", "Actor to set temperature": "确定温度的代理", "Window/Door sensor": "温得传感器", "Value": "价值", "Actor": "代理", "Action": "行动", "Action to perform": "采取行动", "Set temp": "固定时间", "Set Home-Mode": "建 议", "Target temperature": "目标诱因", "Set temperature of actor": "基调温度", "Immediately": "立即", "Synchronize temperature immediately": "温度立即同步", "Delay": "拖延", "Delay to perform action (seconds)": "推迟采取行动(二)", "Temperature sensor is missing in adapter configuration to perform action: ": "变形组中缺乏帝国传感器,以采取行动: ", "Wrong Sensor:": "Wrong Sensor:", "You have to use a bool sensor!": "你们必须使用一个手枪!", "Sensor action in": "诉讼", "seconds!": "第二!", "Sensor action aborted for": "诉讼", "This is a test message!": "这是一种试验信息!", "Test message has been sent!": "发射了试验信息!", "Send test notification": "简历", "Temperature control": "示范控制", "Update data structure": "最新数据结构", "Message services": "邮件事务", "Message texts": "文 件", "Reactions to sensor status changes": "对感情状况的反应", "Token saved": "幸免", "Bridge": "B. 桥梁", "More details": "详情", "Set home mode": "建 议", "Enable / Disable sensor actions": "易感染感情行动", "Additional functions": "其他职能", "Only update datapoints if changes are detected": "只有在发现变化时才更新数据点", "Change temperature states every time": "变化温度" }