{
    "lblOptions": "options",
    "lblHost": "Host",
    "hlpHost": "IP address or FQDN of the device",
    "lblPort": "TCP-Port",
    "hlpPort": "TCP-Port (default: 4352, some older devices use: 10000)",
    "lblPassword": "Password",
    "hlpPassword": "maximum 32 ASCII Characters (can be left empty if projector security is set to OFF)",
    "lblClass": "Class",
    "hlpClass": "select the maximum supported class of the projector",
    "lblSocketTimeout": "Socket timeout",
    "hlpSocketTimeout": "Sets the socket to timeout after timeout milliseconds of inactivity. Default: 800 ms",
    "lblReconnectDelay": "Reconnect timeout",
    "hlpReconnectDelay": "time to recheck the projector connection after a connection failure. Default: 10000 ms (10 Seconds)",
    "lblStatusDelay": "Status poll interval",
    "hlpStatusDelay": "interval to refresh status (e.g. power, input switch and mute). Default: 2000 ms (2 seconds)",
    "lblInformationDelay": "Information poll interval",
    "hlpInformationDelay": "interval to refresh the whole projector status, default 60000 ms (1 minute)",
    "ttpInformationDelay": "has to be a multiple of the status poll interval",
    "lblSkippedCyclesAfterPowerOn": "Number of skipped short cycles after power ON event",
    "hlpSkippedCyclesAfterPowerOn": "Set the number of skipped short cycles, mainly power queries, after power ON event, default 5 (with 2000 ms statusDelay corresponds to 10s non-guarantee time)",
    "lblConnectionCheckMethod": "Method to check the availability of the projector",
    "lblOff": "Aus",
    "lblTcpPing": "TCP-Ping",
    "lblTcpPort": "TCP-Port for availabiliy check",
    "hlpTcpPort": "Usually the same port as above",
    "lblCheckTimeout": "Check timeout",
    "hlpCheckTimeout": "time to wait for the connection check to complete. Default: 500ms",
    "lblExtended": "extended",
    "lblQueryType": "Select the type of query for all information types and choose whether the power state must be in state Power-on prior to that query. If the query is only on startup and the power state must be in state Power-on, then the query will be executed on first power on, only one time after the adapter has been restarted",
    "lblQueryOnlyPwrOn": "Power state must be ON to query",
    "lblNever": "Never",
    "lblOnlyOnStartup": "Only on adapter startup",
    "lblOnStatusPoll": "On status poll interval",
    "lblOnInformationPoll": "On information poll interval",
    "lblQueryTypeCLSS": "Class information query (CLSS)",
    "lblQueryTypePWR": "Power status query (PWR)",
    "lblQueryTypeINPT": "Input switch query (INPT)",
    "lblQueryTypeAVMT": "Mute status query (AVMT)",
    "lblQueryTypeERST": "Error status query (ERST)",
    "lblQueryTypeLAMP": "Lamp number/ lighting hour query (LAMP)",
    "lblQueryTypeINST": "Input toggling list query (INST)",
    "lblQueryTypeNAME": "Projector name query (NAME)",
    "lblQueryTypeINF1": "Manufacturer name information query (INF1)",
    "lblQueryTypeINF2": "Product name information query (INF2)",
    "lblQueryTypeINFO": "Other information query (INFO)",
    "lblInputs": "customize inputs",
    "lblCustomizeInputs": "Optionally: Customize your signal inputs and transfer this to the object (pjlink.x.input), so that you have a validation in the object database and a dropdown menu to select your input",
    "lblUpdateInputInfo": "Get the current input configuration from the projector and transfer this object to the inputInfo to customize the inputs",
    "wrnOverwriteInputInfo": "Overwrite the existing inputInfo configuration? You must leave and reenter the instance configuration dialog!",
    "lblSetInstanceInput": "Set the instance input object to fit the edited inputs",
    "wrnSetInstanceInput": "Overwrite the existing input configuration? Don't forget to restart the instance after saving to reload the config object to the instance!",
    "lblResetInstanceInput": "Set the instance input object to default",
    "wrnResetInstanceInput": "Overwrite the existing input configuration?"
}