You can select **Execute always**, then the zone will simply always execute if any previously defined conditions are met.
However, if you want to define more conditions, you should deactivate this option. Then a table with the following options will appear:
| Column | Mandatory | Description |
|----------|:------------:|-------|
|  | Yes | Enables/disables this table row. If not activated, this table row is ignored by the adapter. In the Adapter Options, under 'FURTHER OPTIONS > Input Validation', you can set that even disabled rows are checked for validity. |
| Name of zone | Yes | Any zone name. |
| Start/End | Yes | As soon as a trigger triggers, the current time must be within this time period in order for the target devices to be switched.
You can enter a time in hours/minutes here, such as `08:25` or `23:30`. You can also enter an astro name like `sunset` and add an offset in minutes, e.g. `goldenHourEnd+30` or `sunset-60`.
The current astro times can be found as info states in this adapter: `smartcontrol.x.info.astroTimes`.
A start time of e.g. `sunset` and an end time of e.g. `03:00` (i.e. beyond midnight) is also possible. |
| Mon-Sun | Yes | Targets are switched if these weekdays apply. |
| Additional conditions | No | Here you can enter additional conditions that must be fulfilled additionally, e.g: Someone is present, today is a holiday, grandma is sleeping, etc. |
|  | No | For *Additional conditions*: If activated, all conditions must apply ('and'). If disabled, it is enough if one of the conditions applies.
If you select only one condition, it doesn't matter if you enable it or not. |
| Never switch on if... | No | Here you can enter additional conditions that must never apply, e.g: No one at home, radio on, etc. |
|  | No | For *Never switch on if...*: If activated, all conditions must apply ('and'). If disabled, it is enough if one of the conditions applies.
If you select only one condition, it doesn't matter if you enable it or not. |