// @generated
// This code is automatically generated. Manual editing is not recommended.

/*
 * BSD-2-Clause License
 *
 * Original source code is copyright (c) 2019-2022 Jeremy Rylan
 * <https://github.com/jrylan>
 *
 * Documentation and keyword descriptions are copyright (c) 2018 IETF Trust
 * <https://www.ietf.org/>, Austin Wright <aaa@bzfx.net>, Henry Andrews
 * <henry@cloudflare.com>, Geraint Luff <luffgd@gmail.com>, and Cloudflare,
 * Inc. <https://www.cloudflare.com/>. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

export const draft = "7" as const;
export const $schema = "https://json-schema.org/draft-07/schema" as const;

type MaybeReadonlyArray<T> = Array<T> | ReadonlyArray<T>;
type ValueOf<T> = T[keyof T];

/**
 * JSON Schema [Draft 7](https://json-schema.org/draft-07/json-schema-validation.html)
 */
export type JSONSchema<
  Value = any,
  SchemaType = Value extends boolean ? "boolean"
    : Value extends null ? "null"
    : Value extends number ? "number" | "integer"
    : Value extends string ? "string"
    : Value extends unknown[] ? "array"
    : Value extends Record<string | number, unknown> ? "object"
    : JSONSchema.TypeValue,
> = boolean | {
  /**
   * This keyword is reserved for comments from schema authors to readers or
   * maintainers of the schema. The value of this keyword MUST be a string.
   * Implementations MUST NOT present this string to end users. Tools for
   * editing schemas SHOULD support displaying and editing this keyword.
   *
   * The value of this keyword MAY be used in debug or error output which is
   * intended for developers making use of schemas. Schema vocabularies
   * SHOULD allow `comment` within any object containing vocabulary
   * keywords.
   *
   * Implementations MAY assume `comment` is allowed unless the vocabulary
   * specifically forbids it. Vocabularies MUST NOT specify any effect of
   * `comment` beyond what is described in this specification. Tools that
   * translate other media types or programming languages to and from
   * `application/schema+json` MAY choose to convert that media type or
   * programming language's native comments to or from `comment` values.
   *
   * The behavior of such translation when both native comments and
   * `comment` properties are present is implementation-dependent.
   * Implementations SHOULD treat `comment` identically to an unknown
   * extension keyword.
   *
   * They MAY strip `comment` values at any point during processing. In
   * particular, this allows for shortening schemas when the size of deployed
   * schemas is a concern. Implementations MUST NOT take any other action
   * based on the presence, absence, or contents of `comment` properties.
   */
  $comment?: string;

  /**
   * The `$id` keyword defines a URI for the schema, and the base URI that
   * other URI references within the schema are resolved against. A
   * subschema's `$id` is resolved against the base URI of its parent
   * schema. If no parent sets an explicit base with `$id`, the base URI is
   * that of the entire document, as determined per
   * [RFC 3986 section 5][RFC3986].
   *
   * If present, the value for this keyword MUST be a string, and MUST
   * represent a valid [URI-reference][RFC3986]. This value SHOULD be
   * normalized, and SHOULD NOT be an empty fragment `#` or an empty string.
   *
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   *
   * @format "uri-reference"
   */
  $id?: string;

  /**
   * The `$ref` keyword is used to reference a schema, and provides the
   * ability to validate recursive structures through self-reference.
   *
   * An object schema with a `$ref` property MUST be interpreted as a
   * `$ref` reference. The value of the `$ref` property MUST be a URI
   * Reference. Resolved against the current URI base, it identifies the URI
   * of a schema to use. All other properties in a `$ref` object MUST be
   * ignored.
   *
   * The URI is not a network locator, only an identifier. A schema need not
   * be downloadable from the address if it is a network-addressable URL, and
   * implementations SHOULD NOT assume they should perform a network
   * operation when they encounter a network-addressable URI.
   *
   * A schema MUST NOT be run into an infinite loop against a schema. For
   * example, if two schemas `"#alice"` and `"#bob"` both have an
   * `allOf` property that refers to the other, a naive validator might get
   * stuck in an infinite recursive loop trying to validate the instance.
   * Schemas SHOULD NOT make use of infinite recursive nesting like this; the
   * behavior is undefined.
   *
   * @format "uri-reference"
   */
  $ref?: string;

  /**
   * The `$schema` keyword is both used as a JSON Schema version identifier
   * and the location of a resource which is itself a JSON Schema, which
   * describes any schema written for this particular version.
   *
   * The value of this keyword MUST be a [URI][RFC3986] (containing a scheme)
   * and this URI MUST be normalized. The current schema MUST be valid
   * against the meta-schema identified by this URI.
   *
   * If this URI identifies a retrievable resource, that resource SHOULD be
   * of media type `application/schema+json`.
   *
   * The `$schema` keyword SHOULD be used in a root schema. It MUST NOT
   * appear in subschemas.
   *
   * Values for this property are defined in other documents and by other
   * parties. JSON Schema implementations SHOULD implement support for
   * current and previous published drafts of JSON Schema vocabularies as
   * deemed reasonable.
   *
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   *
   * @format "uri"
   */
  $schema?: string;

  /**
   * The value of `additionalItems` MUST be a valid JSON Schema.
   *
   * This keyword determines how child instances validate for arrays, and
   * does not directly validate the immediate instance itself.
   *
   * If `items` is an array of schemas, validation succeeds if every
   * instance element at a position greater than the size of `items`
   * validates against `additionalItems`.
   *
   * Otherwise, `additionalItems` MUST be ignored, as the `items` schema
   * (possibly the default value of an empty schema) is applied to all
   * elements.
   *
   * Omitting this keyword has the same behavior as an empty schema.
   */
  additionalItems?: JSONSchema;

  /**
   * The value of `additionalProperties` MUST be a valid JSON Schema.
   *
   * This keyword determines how child instances validate for objects, and
   * does not directly validate the immediate instance itself.
   *
   * Validation with `additionalProperties` applies only to the child
   * values of instance names that do not match any names in `properties`,
   * and do not match any regular expression in `patternProperties`.
   *
   * For all such properties, validation succeeds if the child instance
   * validates against the `additionalProperties` schema.
   *
   * Omitting this keyword has the same behavior as an empty schema.
   */
  additionalProperties?: JSONSchema;

  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against all schemas defined by this keyword's value.
   */
  allOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;

  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against at least one schema defined by this keyword's
   * value.
   */
  anyOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;

  /**
   * An instance validates successfully against this keyword if its value is
   * equal to the value of the keyword.
   *
   * Use of this keyword is functionally equivalent to the `enum` keyword
   * with a single value.
   */
  const?: Value;

  /**
   * The value of this keyword MUST be a valid JSON Schema.
   *
   * An array instance is valid against `contains` if at least one of its
   * elements is valid against the given schema.
   */
  contains?: JSONSchema<Value, SchemaType>;

  /**
   * If the instance value is a string, this property defines that the
   * string SHOULD be interpreted as binary data and decoded using the
   * encoding named by this property. [RFC 2045, Sec 6.1][RFC2045] lists the
   * possible values for this property.
   *
   * The value of this property SHOULD be ignored if the instance described
   * is not a string.
   *
   * [RFC2045]: https://datatracker.ietf.org/doc/html/rfc2045#section-6.1
   */
  contentEncoding?:
    | "7bit"
    | "8bit"
    | "base64"
    | "binary"
    | "ietf-token"
    | "quoted-printable"
    | "x-token";

  /**
   * The value of this property must be a media type, as defined by
   * [RFC 2046][RFC2046]. This property defines the media type of instances
   * which this schema defines.
   *
   * The value of this property SHOULD be ignored if the instance described
   * is not a string.
   *
   * If the `contentEncoding` property is not present, but the instance
   * value is a string, then the value of this property SHOULD specify a text
   * document type, and the character set SHOULD be the character set into
   * which the JSON string value was decoded (for which the default is
   * Unicode).
   *
   * [RFC2046]: https://datatracker.ietf.org/doc/html/rfc2046
   */
  contentMediaType?: string;

  /**
   * This keyword can be used to supply a default JSON value associated with
   * a particular schema. It is RECOMMENDED that a `default` value be valid
   * against the associated schema.
   */
  default?: Value;

  /**
   * The `definitions` keywords provides a standardized location for schema
   * authors to inline re-usable JSON Schemas into a more general schema. The
   * keyword does not directly affect the validation result.
   *
   * This keyword's value MUST be an object. Each member value of this object
   * MUST be a valid JSON Schema.
   */
  definitions?: Record<string, JSONSchema>;

  /**
   * This keyword specifies rules that are evaluated if the instance is an
   * object and contains a certain property.
   *
   * This keyword's value MUST be an object. Each property specifies a
   * dependency. Each dependency value MUST be an array or a valid JSON
   * Schema.
   *
   * If the dependency value is a subschema, and the dependency key is a
   * property in the instance, the entire instance must validate against the
   * dependency value.
   *
   * If the dependency value is an array, each element in the array, if any,
   * MUST be a string, and MUST be unique. If the dependency key is a
   * property in the instance, each of the items in the dependency value must
   * be a property that exists in the instance.
   *
   * Omitting this keyword has the same behavior as an empty object.
   */
  dependencies?: Record<string, MaybeReadonlyArray<string> | JSONSchema>;

  /**
   * Can be used to decorate a user interface with explanation or information
   * about the data produced.
   */
  description?: string;

  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * When `if` is present, and the instance fails to validate against its
   * subschema, then validation succeeds against this keyword if the instance
   * successfully validates against this keyword's subschema.
   *
   * This keyword has no effect when `if` is absent, or when the instance
   * successfully validates against its subschema. Implementations MUST NOT
   * evaluate the instance against this keyword, for either validation or
   * annotation collection purposes, in such cases.
   */
  else?: JSONSchema<Value, SchemaType>;

  /**
   * The value of this keyword MUST be an array. This array SHOULD have at
   * least one element. Elements in the array SHOULD be unique.
   *
   * An instance validates successfully against this keyword if its value is
   * equal to one of the elements in this keyword's array value.
   *
   * Elements in the array might be of any type, including `null`.
   */
  enum?: MaybeReadonlyArray<Value>;

  /**
   * The value of this keyword MUST be an array. When multiple occurrences of
   * this keyword are applicable to a single sub-instance, implementations
   * MUST provide a flat array of all values rather than an array of arrays.
   *
   * This keyword can be used to provide sample JSON values associated with a
   * particular schema, for the purpose of illustrating usage. It is
   * RECOMMENDED that these values be valid against the associated schema.
   *
   * Implementations MAY use the value(s) of `default`, if present, as an
   * additional example. If `examples` is absent, `default` MAY still be
   * used in this manner.
   */
  examples?: MaybeReadonlyArray<Value>;

  /**
   * The value of `exclusiveMaximum` MUST be a number, representing an
   * exclusive upper limit for a numeric instance.
   *
   * If the instance is a number, then the instance is valid only if it has a
   * value strictly less than (not equal to) `exclusiveMaximum`.
   */
  exclusiveMaximum?: number;

  /**
   * The value of `exclusiveMinimum` MUST be a number, representing an
   * exclusive lower limit for a numeric instance.
   *
   * If the instance is a number, then the instance is valid only if it has a
   * value strictly greater than (not equal to) `exclusiveMinimum`.
   */
  exclusiveMinimum?: number;

  /**
   * The `format` keyword functions as both an [annotation][annotation] and
   * as an [assertion][assertion]. While no special effort is required to
   * implement it as an annotation conveying semantic meaning, implementing
   * validation is non-trivial.
   *
   * Implementations MAY support the `format` keyword as a validation
   * assertion.
   *
   * Implementations MAY add custom `format` attributes. Save for agreement
   * between parties, schema authors SHALL NOT expect a peer implementation
   * to support this keyword and/or custom `format` attributes.
   *
   * [annotation]: https://json-schema.org/draft-07/json-schema-validation.html#annotations
   * [assertion]: https://json-schema.org/draft-07/json-schema-validation.html#assertions
   */
  format?: string;

  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * This validation outcome of this keyword's subschema has no direct effect
   * on the overall validation result. Rather, it controls which of the
   * `then` or `else` keywords are evaluated.
   *
   * Instances that successfully validate against this keyword's subschema
   * MUST also be valid against the subschema value of the `then` keyword,
   * if present.
   *
   * Instances that fail to validate against this keyword's subschema MUST
   * also be valid against the subschema value of the `else` keyword, if
   * present.
   *
   * If [annotations][annotations] are being collected, they are collected
   * from this keyword's subschema in the usual way, including when the
   * keyword is present without either `then` or `else`.
   *
   * [annotations]: https://json-schema.org/draft-07/json-schema-validation.html#annotations
   */
  if?: JSONSchema<Value, SchemaType>;

  /**
   * The value of `items` MUST be either a valid JSON Schema or an array of
   * valid JSON Schemas.
   *
   * This keyword determines how child instances validate for arrays, and
   * does not directly validate the immediate instance itself.
   *
   * If `items` is a schema, validation succeeds if all elements in the
   * array successfully validate against that schema.
   *
   * If `items` is an array of schemas, validation succeeds if each element
   * of the instance validates against the schema at the same position, if
   * any.
   *
   * Omitting this keyword has the same behavior as an empty schema.
   */
  items?: MaybeReadonlyArray<JSONSchema> | JSONSchema;

  /**
   * The value of `maximum` MUST be a number, representing an inclusive
   * upper limit for a numeric instance.
   *
   * If the instance is a number, then this keyword validates only if the
   * instance is less than or exactly equal to `maximum`.
   */
  maximum?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An array instance is valid against `maxItems` if its size is less
   * than, or equal to, the value of this keyword.
   *
   * @minimum 0
   */
  maxItems?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * A string instance is valid against this keyword if its length is less
   * than, or equal to, the value of this keyword.
   *
   * The length of a string instance is defined as the number of its
   * characters as defined by [RFC 7159][RFC7159].
   *
   * [RFC7159]: https://datatracker.ietf.org/doc/html/rfc7159
   *
   * @minimum 0
   */
  maxLength?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An object instance is valid against `maxProperties` if its number of
   * `properties` is less than, or equal to, the value of this keyword.
   *
   * @minimum 0
   */
  maxProperties?: number;

  /**
   * The value of `minimum` MUST be a number, representing an inclusive
   * lower limit for a numeric instance.
   *
   * If the instance is a number, then this keyword validates only if the
   * instance is greater than or exactly equal to `minimum`.
   */
  minimum?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An array instance is valid against `minItems` if its size is greater
   * than, or equal to, the value of this keyword.
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * @default 0
   * @minimum 0
   */
  minItems?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * A string instance is valid against this keyword if its length is greater
   * than, or equal to, the value of this keyword.
   *
   * The length of a string instance is defined as the number of its
   * characters as defined by [RFC 7159][RFC7159].
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * [RFC7159]: https://datatracker.ietf.org/doc/html/rfc7159
   *
   * @default 0
   * @minimum 0
   */
  minLength?: number;

  /**
   * The value of this keyword MUST be a non-negative integer.
   *
   * An object instance is valid against `minProperties` if its number of
   * `properties` is greater than, or equal to, the value of this keyword.
   *
   * Omitting this keyword has the same behavior as a value of `0`.
   *
   * @default 0
   * @minimum 0
   */
  minProperties?: number;

  /**
   * The value of `multipleOf` MUST be a number, strictly greater than
   * `0`.
   *
   * A numeric instance is valid only if division by this keyword's value
   * results in an integer.
   *
   * @exclusiveMinimum 0
   */
  multipleOf?: number;

  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * An instance is valid against this keyword if it fails to validate
   * successfully against the schema defined by this keyword.
   */
  not?: JSONSchema<Value, SchemaType>;

  /**
   * This keyword's value MUST be a non-empty array. Each item of the array
   * MUST be a valid JSON Schema.
   *
   * An instance validates successfully against this keyword if it validates
   * successfully against exactly one schema defined by this keyword's value.
   */
  oneOf?: MaybeReadonlyArray<JSONSchema<Value, SchemaType>>;

  /**
   * The value of this keyword MUST be a string. This string SHOULD be a
   * valid regular expression, according to the [ECMA-262][ecma262] regular
   * expression dialect.
   *
   * A string instance is considered valid if the regular expression matches
   * the instance successfully. Recall: regular expressions are not
   * implicitly anchored.
   *
   * [ecma262]: https://www.ecma-international.org/publications-and-standards/standards/ecma-262/
   *
   * @format "regex"
   */
  pattern?: string;

  /**
   * The value of `patternProperties` MUST be an object. Each property name
   * of this object SHOULD be a valid regular expression, according to the
   * [ECMA-262][ecma262] regular expression dialect. Each property value of
   * this object MUST be a valid JSON Schema.
   *
   * This keyword determines how child instances validate for objects, and
   * does not directly validate the immediate instance itself. Validation of
   * the primitive instance type against this keyword always succeeds.
   *
   * Validation succeeds if, for each instance name that matches any regular
   * expressions that appear as a property name in this keyword's value, the
   * child instance for that name successfully validates against each schema
   * that corresponds to a matching regular expression.
   *
   * Omitting this keyword has the same behavior as an empty object.
   *
   * [ecma262]: https://www.ecma-international.org/publications-and-standards/standards/ecma-262/
   */
  patternProperties?: Record<string, JSONSchema>;

  /**
   * The value of `properties` MUST be an object. Each value of this object
   * MUST be a valid JSON Schema.
   *
   * This keyword determines how child instances validate for objects, and
   * does not directly validate the immediate instance itself.
   *
   * Validation succeeds if, for each name that appears in both the instance
   * and as a name within this keyword's value, the child instance for that
   * name successfully validates against the corresponding schema.
   *
   * Omitting this keyword has the same behavior as an empty object.
   */
  properties?: Record<string, JSONSchema>;

  /**
   * The value of `propertyNames` MUST be a valid JSON Schema.
   *
   * If the instance is an object, this keyword validates if every property
   * name in the instance validates against the provided schema. Note the
   * property name that the schema is testing will always be a string.
   *
   * Omitting this keyword has the same behavior as an empty schema.
   */
  propertyNames?: JSONSchema;

  /**
   * The value of this keyword MUST be a boolean. When multiple occurrences
   * of this keyword are applicable to a single sub-instance, the resulting
   * value MUST be `true` if any occurrence specifies a `true` value, and
   * MUST be `false` otherwise.
   *
   * If `readOnly` has a value of boolean `true`, it indicates that the
   * value of the instance is managed exclusively by the owning authority,
   * and attempts by an application to modify the value of this property are
   * expected to be ignored or rejected by that owning authority.
   *
   * An instance document that is marked as `readOnly` for the entire
   * document MAY be ignored if sent to the owning authority, or MAY result
   * in an error, at the authority's discretion.
   *
   * For example, `readOnly` would be used to mark a database-generated
   * serial number as read-only.
   *
   * This keyword can be used to assist in user interface instance
   * generation.
   *
   * @default false
   */
  readOnly?: boolean;

  /**
   * The value of this keyword MUST be an array. Elements of this array, if
   * any, MUST be strings, and MUST be unique.
   *
   * An object instance is valid against this keyword if every item in the
   * array is the name of a property in the instance.
   *
   * Omitting this keyword has the same behavior as an empty array.
   */
  required?: MaybeReadonlyArray<string>;

  /**
   * This keyword's value MUST be a valid JSON Schema.
   *
   * When `if` is present, and the instance successfully validates against
   * its subschema, then validation succeeds against this keyword if the
   * instance also successfully validates against this keyword's subschema.
   *
   * This keyword has no effect when `if` is absent, or when the instance
   * fails to validate against its subschema. Implementations MUST NOT
   * evaluate the instance against this keyword, for either validation or
   * annotation collection purposes, in such cases.
   */
  then?: JSONSchema<Value, SchemaType>;

  /**
   * Can be used to decorate a user interface with a short label about the
   * data produced.
   */
  title?: string;

  /**
   * The value of this keyword MUST be either a string or an array. If it is
   * an array, elements of the array MUST be strings and MUST be unique.
   *
   * String values MUST be one of the six primitive types (`"null"`,
   * `"boolean"`, `"object"`, `"array"`, `"number"`, or
   * `"string"`), or `"integer"` which matches any number with a zero
   * fractional part.
   *
   * An instance validates if and only if the instance is in any of the sets
   * listed for this keyword.
   */
  type?: SchemaType;

  /**
   * The value of this keyword MUST be a boolean.
   *
   * If this keyword has boolean value `false`, the instance validates
   * successfully. If it has boolean value `true`, the instance validates
   * successfully if all of its elements are unique.
   *
   * Omitting this keyword has the same behavior as a value of `false`.
   *
   * @default false
   */
  uniqueItems?: boolean;

  /**
   * The value of this keyword MUST be a boolean. When multiple occurrences
   * of this keyword is applicable to a single sub-instance, the resulting
   * value MUST be `true` if any occurrence specifies a `true` value, and
   * MUST be `false` otherwise.
   *
   * If `writeOnly` has a value of boolean `true`, it indicates that the
   * value is never present when the instance is retrieved from the owning
   * authority. It can be present when sent to the owning authority to update
   * or create the document (or the resource it represents), but it will not
   * be included in any updated or newly created version of the instance.
   *
   * An instance document that is marked as `writeOnly` for the entire
   * document MAY be returned as a blank document of some sort, or MAY
   * produce an error upon retrieval, or have the retrieval request ignored,
   * at the authority's discretion.
   *
   * For example, `writeOnly` would be used to mark a password input field.
   *
   * These keywords can be used to assist in user interface instance
   * generation. In particular, an application MAY choose to use a widget
   * that hides input values as they are typed for write-only fields.
   *
   * @default false
   */
  writeOnly?: boolean;
};

// -----------------------------------------------------------------------------

export namespace JSONSchema {
  export type TypeValue = (
    | ValueOf<TypeName>
    | TypeName
    | Array<ValueOf<TypeName> | TypeName>
    | ReadonlyArray<ValueOf<TypeName> | TypeName>
  );

  /**
   * JSON Schema interface
   */
  export type Interface<
    Value = any,
    SchemaType extends TypeValue = TypeValue,
  > = Exclude<
    JSONSchema<Value, SchemaType>,
    boolean
  >;

  export type Array<T = any> = Pick<
    Interface<T, "array">,
    KeywordByType.Any | KeywordByType.Array
  >;

  export type Boolean = Pick<
    Interface<boolean, "boolean">,
    KeywordByType.Any
  >;

  export type Integer = Pick<
    Interface<number, "integer">,
    KeywordByType.Any | KeywordByType.Number
  >;

  export type Number = Pick<
    Interface<number, "number">,
    KeywordByType.Any | KeywordByType.Number
  >;

  export type Null = Pick<
    Interface<null, "null">,
    KeywordByType.Any
  >;

  export type Object<T = any> = Pick<
    Interface<T, "object">,
    KeywordByType.Any | KeywordByType.Object
  >;

  export type String = Pick<
    Interface<string, "string">,
    KeywordByType.Any | KeywordByType.String
  >;
}

namespace KeywordByType {
  export type Any =
    | "$comment"
    | "$id"
    | "$ref"
    | "$schema"
    | "allOf"
    | "anyOf"
    | "const"
    | "default"
    | "definitions"
    | "description"
    | "else"
    | "enum"
    | "examples"
    | "if"
    | "not"
    | "oneOf"
    | "readOnly"
    | "then"
    | "title"
    | "type"
    | "writeOnly";

  export type Array =
    | "additionalItems"
    | "contains"
    | "items"
    | "maxItems"
    | "minItems"
    | "uniqueItems";

  export type Number =
    | "exclusiveMaximum"
    | "exclusiveMinimum"
    | "maximum"
    | "minimum"
    | "multipleOf";

  export type Object =
    | "additionalProperties"
    | "dependencies"
    | "maxProperties"
    | "minProperties"
    | "patternProperties"
    | "properties"
    | "propertyNames"
    | "required";

  export type String =
    | "contentEncoding"
    | "contentMediaType"
    | "format"
    | "maxLength"
    | "minLength"
    | "pattern";
}

// -----------------------------------------------------------------------------

/**
 * Content encoding strategy enum.
 *
 * - [Content-Transfer-Encoding Syntax](https://datatracker.ietf.org/doc/html/rfc2045#section-6.1)
 * - [7bit vs 8bit encoding](https://stackoverflow.com/questions/25710599/content-transfer-encoding-7bit-or-8-bit/28531705#28531705)
 */
export enum ContentEncoding {
  /**
   * Only US-ASCII characters, which use the lower 7 bits for each character.
   *
   * Each line must be less than 1,000 characters.
   */
  "7bit" = "7bit",

  /**
   * Allow extended ASCII characters which can use the 8th (highest) bit to
   * indicate special characters not available in 7bit.
   *
   * Each line must be less than 1,000 characters.
   */
  "8bit" = "8bit",

  /**
   * Useful for data that is mostly non-text.
   */
  Base64 = "base64",

  /**
   * Same character set as 8bit, with no line length restriction.
   */
  Binary = "binary",

  /**
   * An extension token defined by a standards-track RFC and registered with
   * IANA.
   */
  IETFToken = "ietf-token",

  /**
   * Lines are limited to 76 characters, and line breaks are represented using
   * special characters that are escaped.
   */
  QuotedPrintable = "quoted-printable",

  /**
   * The two characters "X-" or "x-" followed, with no intervening white space,
   * by any token.
   */
  XToken = "x-token",
}

/**
 * This enum provides well-known formats that apply to strings.
 */
export enum Format {
  /**
   * A string instance is valid against this attribute if it is a valid
   * representation according to the "full-date" production in
   * [RFC 3339][RFC3339].
   *
   * [RFC3339]: https://datatracker.ietf.org/doc/html/rfc3339
   */
  Date = "date",

  /**
   * A string instance is valid against this attribute if it is a valid
   * representation according to the "date-time" production in
   * [RFC 3339][RFC3339].
   *
   * [RFC3339]: https://datatracker.ietf.org/doc/html/rfc3339
   */
  DateTime = "date-time",

  /**
   * A string instance is valid against this attribute if it is a valid Internet
   * email address as defined by [RFC 5322, section 3.4.1][RFC5322].
   *
   * [RFC5322]: https://datatracker.ietf.org/doc/html/rfc5322
   */
  Email = "email",

  /**
   * As defined by [RFC 1034, section 3.1][RFC1034], including host names
   * produced using the Punycode algorithm specified in
   * [RFC 5891, section 4.4][RFC5891].
   *
   * [RFC1034]: https://datatracker.ietf.org/doc/html/rfc1034
   * [RFC5891]: https://datatracker.ietf.org/doc/html/rfc5891
   */
  Hostname = "hostname",

  /**
   * A string instance is valid against this attribute if it is a valid Internet
   * email address as defined by [RFC 6531][RFC6531].
   *
   * [RFC6531]: https://datatracker.ietf.org/doc/html/rfc6531
   */
  IDNEmail = "idn-email",

  /**
   * As defined by either [RFC 1034, section 3.1][RFC1034] as for hostname, or
   * an internationalized hostname as defined by
   * [RFC 5890, section 2.3.2.3][RFC5890].
   *
   * [RFC1034]: https://datatracker.ietf.org/doc/html/rfc1034
   * [RFC5890]: https://datatracker.ietf.org/doc/html/rfc5890
   */
  IDNHostname = "idn-hostname",

  /**
   * An IPv4 address according to the "dotted-quad" ABNF syntax as defined in
   * [RFC 2673, section 3.2][RFC2673].
   *
   * [RFC2673]: https://datatracker.ietf.org/doc/html/rfc2673
   */
  IPv4 = "ipv4",

  /**
   * An IPv6 address as defined in [RFC 4291, section 2.2][RFC4291].
   *
   * [RFC4291]: https://datatracker.ietf.org/doc/html/rfc4291
   */
  IPv6 = "ipv6",

  /**
   * A string instance is valid against this attribute if it is a valid IRI,
   * according to [RFC 3987][RFC3987].
   *
   * [RFC3987]: https://datatracker.ietf.org/doc/html/rfc3987
   */
  IRI = "iri",

  /**
   * A string instance is valid against this attribute if it is a valid IRI
   * Reference (either an IRI or a relative-reference), according to
   * [RFC 3987][RFC3987].
   *
   * [RFC3987]: https://datatracker.ietf.org/doc/html/rfc3987
   */
  IRIReference = "iri-reference",

  /**
   * A string instance is valid against this attribute if it is a valid JSON
   * string representation of a JSON Pointer, according to
   * [RFC 6901, section 5][RFC6901].
   *
   * [RFC6901]: https://datatracker.ietf.org/doc/html/rfc6901
   */
  JSONPointer = "json-pointer",

  /**
   * A string instance is valid against this attribute if it is a valid JSON
   * string representation of a JSON Pointer fragment, according to
   * [RFC 6901, section 5][RFC6901].
   *
   * [RFC6901]: https://datatracker.ietf.org/doc/html/rfc6901
   */
  JSONPointerURIFragment = "json-pointer-uri-fragment",

  /**
   * This attribute applies to string instances.
   *
   * A regular expression, which SHOULD be valid according to the
   * [ECMA-262][ecma262] regular expression dialect.
   *
   * Implementations that validate formats MUST accept at least the subset of
   * [ECMA-262][ecma262] defined in the [Regular Expressions][regexInterop]
   * section of this specification, and SHOULD accept all valid
   * [ECMA-262][ecma262] expressions.
   *
   * [ecma262]: https://www.ecma-international.org/publications-and-standards/standards/ecma-262/
   * [regexInterop]: https://json-schema.org/draft-07/json-schema-validation.html#regexInterop
   */
  RegEx = "regex",

  /**
   * A string instance is valid against this attribute if it is a valid
   * [Relative JSON Pointer][relative-json-pointer].
   *
   * [relative-json-pointer]: https://datatracker.ietf.org/doc/html/draft-handrews-relative-json-pointer-01
   */
  RelativeJSONPointer = "relative-json-pointer",

  /**
   * A string instance is valid against this attribute if it is a valid
   * representation according to the "time" production in [RFC 3339][RFC3339].
   *
   * [RFC3339]: https://datatracker.ietf.org/doc/html/rfc3339
   */
  Time = "time",

  /**
   * A string instance is valid against this attribute if it is a valid URI,
   * according to [RFC3986][RFC3986].
   *
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   */
  URI = "uri",

  /**
   * A string instance is valid against this attribute if it is a valid URI
   * Reference (either a URI or a relative-reference), according to
   * [RFC3986][RFC3986].
   *
   * [RFC3986]: https://datatracker.ietf.org/doc/html/rfc3986
   */
  URIReference = "uri-reference",

  /**
   * A string instance is valid against this attribute if it is a valid URI
   * Template (of any level), according to [RFC6570][RFC6570].
   *
   * Note that URI Templates may be used for IRIs; there is no separate IRI
   * Template specification.
   *
   * [RFC6570]: https://datatracker.ietf.org/doc/html/rfc6570
   */
  URITemplate = "uri-template",

  /**
   * UUID
   */
  UUID = "uuid",
}

/**
 * Enum consisting of simple type names for the `type` keyword
 */
export enum TypeName {
  /**
   * Value MUST be an array.
   */
  Array = "array",

  /**
   * Value MUST be a boolean.
   */
  Boolean = "boolean",

  /**
   * Value MUST be an integer, no floating point numbers are allowed. This is a
   * subset of the number type.
   */
  Integer = "integer",

  /**
   * Value MUST be null. Note this is mainly for purpose of being able use union
   * types to define nullability. If this type is not included in a union, null
   * values are not allowed (the primitives listed above do not allow nulls on
   * their own).
   */
  Null = "null",

  /**
   * Value MUST be a number, floating point numbers are allowed.
   */
  Number = "number",

  /**
   * Value MUST be an object.
   */
  Object = "object",

  /**
   * Value MUST be a string.
   */
  String = "string",
}

// -----------------------------------------------------------------------------
// Keywords
// -----------------------------------------------------------------------------

export const keywords = [
  "$comment",
  "$id",
  "$ref",
  "$schema",
  "additionalItems",
  "additionalProperties",
  "allOf",
  "anyOf",
  "const",
  "contains",
  "contentEncoding",
  "contentMediaType",
  "default",
  "definitions",
  "dependencies",
  "description",
  "else",
  "enum",
  "examples",
  "exclusiveMaximum",
  "exclusiveMinimum",
  "format",
  "if",
  "items",
  "maximum",
  "maxItems",
  "maxLength",
  "maxProperties",
  "minimum",
  "minItems",
  "minLength",
  "minProperties",
  "multipleOf",
  "not",
  "oneOf",
  "pattern",
  "patternProperties",
  "properties",
  "propertyNames",
  "readOnly",
  "required",
  "then",
  "title",
  "type",
  "uniqueItems",
  "writeOnly",
] as const;