{
    "name": "s2lp",
    "config": {
        "SPI_SDI": {
            "help": "SPI_SDI pin for SPI connection. D11 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_SDO": {
            "help": "SPI_SDO pin for SPI connection. D12 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_SCLK": {
            "help": "SPI_SCLK pin for SPI connection, D13 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_CS": {
            "help": "SPI_CS pin for SPI connection, A1 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_SDN": {
            "help": "SPI_SDN pin for SPI connection, D7 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "TEST_PIN_TX": {
            "help": "TEST_PIN_TX pin for serial connection, D6 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "TEST_PIN_RX": {
            "help": "TEST_PIN_RX pin for serial connection, D5 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "TEST_PIN_CSMA": {
            "help": "TEST_PIN_CSMA pin for CSMA, D4 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "TEST_PIN_SPARE_1": {
            "help": "TEST_PIN_SPARE_1 pin for testing, D2 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "TEST_PIN_SPARE_2": {
            "help": "TEST_PIN_SPARE_2 pin for testing, D8 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_GPIO0": {
            "help": "SPI_GPIO0 pin for GPIO testing, A0 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_GPIO1": {
            "help": "SPI_GPIO1 pin for GPIO testing, A2 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_GPIO2": {
            "help": "SPI_GPIO2 pin for GPIO testing, A3 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "SPI_GPIO3": {
            "help": "SPI_GPIO3 pin for GPIO testing, A5 assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "I2C_SDA": {
            "help": "I2C_SDA pin for I2C SDA, null assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "I2C_SCL": {
            "help": "I2C_SCL pin for I2C SCL, null assumed, needs to be set/overwritten otherwise",
            "value": null
        },
        "provide-default": {
            "help": "Provide default NanostackRfpy. [true/false]",
            "value": false
        }
    }
}