/**************************************************************************//**
 * @file     pwm.c
 * @version  V3.00
 * $Revision: 21 $
 * $Date: 15/08/11 10:26a $
 * @brief    M451 series PWM driver source file
 *
 * @note
 * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "M451Series.h"

/** @addtogroup Standard_Driver Standard Driver
  @{
*/

/** @addtogroup PWM_Driver PWM Driver
  @{
*/


/** @addtogroup PWM_EXPORTED_FUNCTIONS PWM Exported Functions
  @{
*/

/**
 * @brief Configure PWM capture and get the nearest unit time.
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32UnitTimeNsec The unit time of counter
 * @param[in] u32CaptureEdge The condition to latch the counter. This parameter is not used
 * @return The nearest unit time in nano second.
 * @details This function is used to Configure PWM capture and get the nearest unit time.
 */
uint32_t PWM_ConfigCaptureChannel(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32UnitTimeNsec, uint32_t u32CaptureEdge)
{
    uint32_t u32Src;
    uint32_t u32PWMClockSrc;
    uint32_t u32NearestUnitTimeNsec;
    uint16_t u16Prescale = 1, u16CNR = 0xFFFF;

    if(pwm == PWM0)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM0SEL_Msk;
    else//(pwm == PWM1)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM1SEL_Msk;

    if(u32Src == 0)
    {
        //clock source is from PLL clock
        u32PWMClockSrc = CLK_GetPLLClockFreq();
    }
    else
    {
        //clock source is from PCLK
        SystemCoreClockUpdate();
        if(pwm == PWM0)
            u32PWMClockSrc = CLK_GetPCLK0Freq();
        else//(pwm == PWM1)
            u32PWMClockSrc = CLK_GetPCLK1Freq();

    }

    u32PWMClockSrc /= 1000;
    for(u16Prescale = 1; u16Prescale <= 0x1000; u16Prescale++)
    {
        u32NearestUnitTimeNsec = (1000000 * u16Prescale) / u32PWMClockSrc;
        if(u32NearestUnitTimeNsec < u32UnitTimeNsec)
        {
            if(u16Prescale == 0x1000)  //limit to the maximum unit time(nano second)
                break;
            if(!((1000000 * (u16Prescale + 1) > (u32NearestUnitTimeNsec * u32PWMClockSrc))))
                break;
            continue;
        }
        break;
    }

    // convert to real register value
    // every two channels share a prescaler
    PWM_SET_PRESCALER(pwm, u32ChannelNum, --u16Prescale);

    // set PWM to down count type(edge aligned)
    (pwm)->CTL1 = ((pwm)->CTL1 & ~(PWM_CTL1_CNTTYPE0_Msk << (2 * u32ChannelNum))) | (1UL << (2 * u32ChannelNum));
    // set PWM to auto-reload mode
    (pwm)->CTL1 &= ~(PWM_CTL1_CNTMODE0_Msk << u32ChannelNum);
    PWM_SET_CNR(pwm, u32ChannelNum, u16CNR);

    return (u32NearestUnitTimeNsec);
}

/**
 * @brief This function Configure PWM generator and get the nearest frequency in edge aligned auto-reload mode
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Frequency Target generator frequency
 * @param[in] u32DutyCycle Target generator duty cycle percentage. Valid range are between 0 ~ 100. 10 means 10%, 20 means 20%...
 * @return Nearest frequency clock in nano second
 * @note Since every two channels, (0 & 1), (2 & 3), shares a prescaler. Call this API to configure PWM frequency may affect
 *       existing frequency of other channel.
 */
uint32_t PWM_ConfigOutputChannel (PWM_T *pwm,
                                  uint32_t u32ChannelNum,
                                  uint32_t u32Frequency,
                                  uint32_t u32DutyCycle)
{
    return PWM_ConfigOutputChannel2(pwm, u32ChannelNum, u32Frequency, u32DutyCycle, 1);
}

/**
 * @brief This function config PWM generator and get the nearest frequency in edge aligned auto-reload mode
 * @param[in] pwm The base address of PWM module
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Frequency Target generator frequency = u32Frequency / u32Frequency2
 * @param[in] u32DutyCycle Target generator duty cycle percentage. Valid range are between 0 ~ 100. 10 means 10%, 20 means 20%...
 * @param[in] u32Frequency2 Target generator frequency = u32Frequency / u32Frequency2
 * @return Nearest frequency clock in nano second
 * @note Since every two channels, (0 & 1), (2 & 3), (4 & 5), shares a prescaler. Call this API to configure PWM frequency may affect
 *       existing frequency of other channel.
 */
uint32_t PWM_ConfigOutputChannel2(PWM_T *pwm,
                                 uint32_t u32ChannelNum,
                                 uint32_t u32Frequency,
                                 uint32_t u32DutyCycle,
                                 uint32_t u32Frequency2)
{
    uint32_t u32Src;
    uint32_t u32PWMClockSrc;
    uint32_t i;
    uint16_t u16Prescale = 1, u16CNR = 0xFFFF;

    if(pwm == PWM0)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM0SEL_Msk;
    else//(pwm == PWM1)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM1SEL_Msk;

    if(u32Src == 0)
    {
        //clock source is from PLL clock
        u32PWMClockSrc = CLK_GetPLLClockFreq();
    }
    else
    {
        //clock source is from PCLK
        SystemCoreClockUpdate();
        if(pwm == PWM0)
            u32PWMClockSrc = CLK_GetPCLK0Freq();
        else//(pwm == PWM1)
            u32PWMClockSrc = CLK_GetPCLK1Freq();

    }

    for(u16Prescale = 1; u16Prescale < 0xFFF; u16Prescale++)//prescale could be 0~0xFFF
    {
        // Note: Support frequency < 1
        i = (uint64_t) u32PWMClockSrc * u32Frequency2 / u32Frequency / u16Prescale;
        // If target value is larger than CNR, need to use a larger prescaler
        if(i > (0x10000))
            continue;

        u16CNR = i;
        break;
    }
    // Store return value here 'cos we're gonna change u16Prescale & u16CNR to the real value to fill into register
    i = u32PWMClockSrc / (u16Prescale * u16CNR);

    // convert to real register value
    // every two channels share a prescaler
    PWM_SET_PRESCALER(pwm, u32ChannelNum, --u16Prescale);
    // set PWM to down count type(edge aligned)
    (pwm)->CTL1 = ((pwm)->CTL1 & ~(PWM_CTL1_CNTTYPE0_Msk << (2 * u32ChannelNum))) | (1UL << (2 * u32ChannelNum));
    // set PWM to auto-reload mode
    (pwm)->CTL1 &= ~(PWM_CTL1_CNTMODE0_Msk << u32ChannelNum);

    PWM_SET_CNR(pwm, u32ChannelNum, --u16CNR);
    if(u32DutyCycle)
    {
        PWM_SET_CMR(pwm, u32ChannelNum, u32DutyCycle * (u16CNR + 1) / 100 - 1);
        (pwm)->WGCTL0 &= ~((PWM_WGCTL0_PRDPCTL0_Msk | PWM_WGCTL0_ZPCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL0 |= (PWM_OUTPUT_LOW << (u32ChannelNum * 2 + PWM_WGCTL0_PRDPCTL0_Pos));
        (pwm)->WGCTL1 &= ~((PWM_WGCTL1_CMPDCTL0_Msk | PWM_WGCTL1_CMPUCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL1 |= (PWM_OUTPUT_HIGH << (u32ChannelNum * 2 + PWM_WGCTL1_CMPDCTL0_Pos));
    }
    else
    {
        PWM_SET_CMR(pwm, u32ChannelNum, 0);
        (pwm)->WGCTL0 &= ~((PWM_WGCTL0_PRDPCTL0_Msk | PWM_WGCTL0_ZPCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL0 |= (PWM_OUTPUT_LOW << (u32ChannelNum * 2 + PWM_WGCTL0_ZPCTL0_Pos));
        (pwm)->WGCTL1 &= ~((PWM_WGCTL1_CMPDCTL0_Msk | PWM_WGCTL1_CMPUCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL1 |= (PWM_OUTPUT_HIGH << (u32ChannelNum * 2 + PWM_WGCTL1_CMPDCTL0_Pos));
    }

    return(i);
}

/**
 * @brief Start PWM module
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to start PWM module.
 */
void PWM_Start(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->CNTEN |= u32ChannelMask;
}

/**
 * @brief Stop PWM module
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to stop PWM module.
 */
void PWM_Stop(PWM_T *pwm, uint32_t u32ChannelMask)
{
    uint32_t i;
    for(i = 0; i < PWM_CHANNEL_NUM; i ++)
    {
        if(u32ChannelMask & (1 << i))
        {
            (pwm)->PERIOD[i] = 0;
        }
    }
}

/**
 * @brief Stop PWM generation immediately by clear channel enable bit
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to stop PWM generation immediately by clear channel enable bit.
 */
void PWM_ForceStop(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->CNTEN &= ~u32ChannelMask;
}

/**
 * @brief Enable selected channel to trigger EADC
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Condition The condition to trigger EADC. Combination of following conditions:
 *                  - \ref PWM_TRIGGER_ADC_EVEN_ZERO_POINT
 *                  - \ref PWM_TRIGGER_ADC_EVEN_PERIOD_POINT
 *                  - \ref PWM_TRIGGER_ADC_EVEN_ZERO_OR_PERIOD_POINT
 *                  - \ref PWM_TRIGGER_ADC_EVEN_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_EVEN_COMPARE_DOWN_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_ODD_ZERO_POINT
 *                  - \ref PWM_TRIGGER_ADC_ODD_PERIOD_POINT
 *                  - \ref PWM_TRIGGER_ADC_ODD_ZERO_OR_PERIOD_POINT
 *                  - \ref PWM_TRIGGER_ADC_ODD_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_ODD_COMPARE_DOWN_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_0_FREE_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_0_FREE_COMPARE_DOWN_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_2_FREE_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_2_FREE_COMPARE_DOWN_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_4_FREE_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_ADC_CH_4_FREE_COMPARE_DOWN_COUNT_POINT
 * @return None
 * @details This function is used to enable selected channel to trigger EADC.
 */
void PWM_EnableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition)
{
    if(u32ChannelNum < 4)
    {
        (pwm)->EADCTS0 &= ~((PWM_EADCTS0_TRGSEL0_Msk) << (u32ChannelNum * 8));
        (pwm)->EADCTS0 |= ((PWM_EADCTS0_TRGEN0_Msk | u32Condition) << (u32ChannelNum * 8));
    }
    else
    {
        (pwm)->EADCTS1 &= ~((PWM_EADCTS1_TRGSEL4_Msk) << ((u32ChannelNum - 4) * 8));
        (pwm)->EADCTS1 |= ((PWM_EADCTS1_TRGEN4_Msk | u32Condition) << ((u32ChannelNum - 4) * 8));
    }
}

/**
 * @brief Disable selected channel to trigger EADC
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable selected channel to trigger EADC.
 */
void PWM_DisableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum)
{
    if(u32ChannelNum < 4)
    {
        (pwm)->EADCTS0 &= ~(PWM_EADCTS0_TRGEN0_Msk << (u32ChannelNum * 8));
    }
    else
    {
        (pwm)->EADCTS1 &= ~(PWM_EADCTS1_TRGEN4_Msk << ((u32ChannelNum - 4) * 8));
    }
}

/**
 * @brief Clear selected channel trigger EADC flag
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Condition This parameter is not used
 * @return None
 * @details This function is used to clear selected channel trigger EADC flag.
 */
void PWM_ClearADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition)
{
    (pwm)->STATUS = (PWM_STATUS_ADCTRGF0_Msk << u32ChannelNum);
}

/**
 * @brief Get selected channel trigger EADC flag
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @retval 0 The specified channel trigger EADC to start of conversion flag is not set
 * @retval 1 The specified channel trigger EADC to start of conversion flag is set
 * @details This function is used to get PWM trigger EADC to start of conversion flag for specified channel.
 */
uint32_t PWM_GetADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((pwm)->STATUS & (PWM_STATUS_ADCTRGF0_Msk << u32ChannelNum)) ? 1 : 0);
}

/**
 * @brief Enable selected channel to trigger DAC
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Condition The condition to trigger DAC. Combination of following conditions:
 *                  - \ref PWM_TRIGGER_DAC_ZERO_POINT
 *                  - \ref PWM_TRIGGER_DAC_PERIOD_POINT
 *                  - \ref PWM_TRIGGER_DAC_COMPARE_UP_COUNT_POINT
 *                  - \ref PWM_TRIGGER_DAC_COMPARE_DOWN_COUNT_POINT
 * @return None
 * @details This function is used to enable selected channel to trigger DAC.
 */
void PWM_EnableDACTrigger(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition)
{
    (pwm)->DACTRGEN |= (u32Condition << u32ChannelNum);
}

/**
 * @brief Disable selected channel to trigger DAC
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable selected channel to trigger DAC.
 */
void PWM_DisableDACTrigger(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->DACTRGEN &= ~((PWM_TRIGGER_DAC_ZERO_POINT | PWM_TRIGGER_DAC_PERIOD_POINT | PWM_TRIGGER_DAC_COMPARE_UP_COUNT_POINT | \
                          PWM_TRIGGER_DAC_COMPARE_DOWN_COUNT_POINT) << u32ChannelNum);
}

/**
 * @brief Clear selected channel trigger DAC flag
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. This parameter is not used
 * @param[in] u32Condition The condition to trigger DAC. This parameter is not used
 * @return None
 * @details This function is used to clear selected channel trigger DAC flag.
 */
void PWM_ClearDACTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition)
{
    (pwm)->STATUS = PWM_STATUS_DACTRGF_Msk;
}

/**
 * @brief Get selected channel trigger DAC flag
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. This parameter is not used
 * @retval 0 The specified channel trigger DAC to start of conversion flag is not set
 * @retval 1 The specified channel trigger DAC to start of conversion flag is set
 * @details This function is used to get selected channel trigger DAC flag.
 */
uint32_t PWM_GetDACTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((pwm)->STATUS & PWM_STATUS_DACTRGF_Msk) ? 1 : 0);
}

/**
 * @brief This function enable fault brake of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 * @param[in] u32LevelMask Output high or low while fault brake occurs, each bit represent the level of a channel
 *                         while fault brake occurs. Bit 0 represents channel 0, bit 1 represents channel 1...
 * @param[in] u32BrakeSource Fault brake source, could be one of following source
 *                  - \ref PWM_FB_EDGE_ACMP0
 *                  - \ref PWM_FB_EDGE_ACMP1
 *                  - \ref PWM_FB_EDGE_BKP0
 *                  - \ref PWM_FB_EDGE_BKP1
 *                  - \ref PWM_FB_EDGE_SYS_CSS
 *                  - \ref PWM_FB_EDGE_SYS_BOD
 *                  - \ref PWM_FB_EDGE_SYS_RAM
 *                  - \ref PWM_FB_EDGE_SYS_COR
 *                  - \ref PWM_FB_LEVEL_ACMP0
 *                  - \ref PWM_FB_LEVEL_ACMP1
 *                  - \ref PWM_FB_LEVEL_BKP0
 *                  - \ref PWM_FB_LEVEL_BKP1
 *                  - \ref PWM_FB_LEVEL_SYS_CSS
 *                  - \ref PWM_FB_LEVEL_SYS_BOD
 *                  - \ref PWM_FB_LEVEL_SYS_RAM
 *                  - \ref PWM_FB_LEVEL_SYS_COR
 * @return None
 * @details This function is used to enable fault brake of selected channel(s).
 *          The write-protection function should be disabled before using this function.
 */
void PWM_EnableFaultBrake(PWM_T *pwm, uint32_t u32ChannelMask, uint32_t u32LevelMask, uint32_t u32BrakeSource)
{
    uint32_t i;
    for(i = 0; i < PWM_CHANNEL_NUM; i ++)
    {
        if(u32ChannelMask & (1 << i))
        {
            if((u32BrakeSource == PWM_FB_EDGE_SYS_CSS) || (u32BrakeSource == PWM_FB_EDGE_SYS_BOD) || \
                    (u32BrakeSource == PWM_FB_EDGE_SYS_RAM) || (u32BrakeSource == PWM_FB_EDGE_SYS_COR) || \
                    (u32BrakeSource == PWM_FB_LEVEL_SYS_CSS) || (u32BrakeSource == PWM_FB_LEVEL_SYS_BOD) || \
                    (u32BrakeSource == PWM_FB_LEVEL_SYS_RAM) || (u32BrakeSource == PWM_FB_LEVEL_SYS_COR))
            {
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= (u32BrakeSource & (PWM_BRKCTL0_1_SYSEBEN_Msk | PWM_BRKCTL0_1_SYSLBEN_Msk));
                (pwm)->FAILBRK |= (u32BrakeSource & 0xF);
            }
            else
            {
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= u32BrakeSource;
            }
        }

        if(u32LevelMask & (1 << i))
        {
            if(i % 2 == 0)
            {
                //set brake action as high level for even channel
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) &= ~PWM_BRKCTL0_1_BRKAEVEN_Msk;
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= ((3UL) << PWM_BRKCTL0_1_BRKAEVEN_Pos);
            }
            else
            {
                //set brake action as high level for odd channel
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) &= ~PWM_BRKCTL0_1_BRKAODD_Msk;
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= ((3UL) << PWM_BRKCTL0_1_BRKAODD_Pos);
            }
        }
        else
        {
            if(i % 2 == 0)
            {
                //set brake action as low level for even channel
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) &= ~PWM_BRKCTL0_1_BRKAEVEN_Msk;
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= ((2UL) << PWM_BRKCTL0_1_BRKAEVEN_Pos);
            }
            else
            {
                //set brake action as low level for odd channel
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) &= ~PWM_BRKCTL0_1_BRKAODD_Msk;
                *(__IO uint32_t *)(&((pwm)->BRKCTL0_1) + (i >> 1)) |= ((2UL) << PWM_BRKCTL0_1_BRKAODD_Pos);
            }
        }
    }

}

/**
 * @brief Enable capture of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to enable capture of selected channel(s).
 */
void PWM_EnableCapture(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->CAPINEN |= u32ChannelMask;
    (pwm)->CAPCTL |= u32ChannelMask;
}

/**
 * @brief Disable capture of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to disable capture of selected channel(s).
 */
void PWM_DisableCapture(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->CAPINEN &= ~u32ChannelMask;
    (pwm)->CAPCTL &= ~u32ChannelMask;
}

/**
 * @brief Enables PWM output generation of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Set bit 0 to 1 enables channel 0 output, set bit 1 to 1 enables channel 1 output...
 * @return None
 * @details This function is used to enable PWM output generation of selected channel(s).
 */
void PWM_EnableOutput(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->POEN |= u32ChannelMask;
}

/**
 * @brief Disables PWM output generation of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
 *                           Set bit 0 to 1 disables channel 0 output, set bit 1 to 1 disables channel 1 output...
 * @return None
 * @details This function is used to disable PWM output generation of selected channel(s).
 */
void PWM_DisableOutput(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->POEN &= ~u32ChannelMask;
}

/**
 * @brief Enables PDMA transfer of selected channel for PWM capture
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number.
 * @param[in] u32RisingFirst The capture order is rising, falling first. Every two channels share the same setting. Valid values are TRUE and FALSE.
 * @param[in] u32Mode Captured data transferred by PDMA interrupt type. It could be either
 *              - \ref PWM_CAPTURE_PDMA_RISING_LATCH
 *              - \ref PWM_CAPTURE_PDMA_FALLING_LATCH
 *              - \ref PWM_CAPTURE_PDMA_RISING_FALLING_LATCH
 * @return None
 * @details This function is used to enable PDMA transfer of selected channel(s) for PWM capture.
 * @note This function can only selects even or odd channel of pairs to do PDMA transfer.
 */
void PWM_EnablePDMA(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32RisingFirst, uint32_t u32Mode)
{
    uint32_t u32IsOddCh;
    u32IsOddCh = u32ChannelNum % 2;
    (pwm)->PDMACTL = ((pwm)->PDMACTL & ~((PWM_PDMACTL_CHSEL0_1_Msk | PWM_PDMACTL_CAPORD0_1_Msk | PWM_PDMACTL_CAPMOD0_1_Msk) << ((u32ChannelNum >> 1) * 8))) | \
                     (((u32IsOddCh << PWM_PDMACTL_CHSEL0_1_Pos) | (u32RisingFirst << PWM_PDMACTL_CAPORD0_1_Pos) | \
                       u32Mode | PWM_PDMACTL_CHEN0_1_Msk) << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Disables PDMA transfer of selected channel for PWM capture
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number.
 * @return None
 * @details This function is used to enable PDMA transfer of selected channel(s) for PWM capture.
 */
void PWM_DisablePDMA(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->PDMACTL &= ~(PWM_PDMACTL_CHEN0_1_Msk << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Enable Dead zone of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Duration Dead zone length in PWM clock count, valid values are between 0~0xFFF, but 0 means there is no Dead zone.
 * @return None
 * @details This function is used to enable Dead zone of selected channel.
 *          The write-protection function should be disabled before using this function.
 * @note Every two channels share the same setting.
 */
void PWM_EnableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Duration)
{
    // every two channels share the same setting
    *(__IO uint32_t *)(&((pwm)->DTCTL0_1) + (u32ChannelNum >> 1)) &= ~PWM_DTCTL0_1_DTCNT_Msk;
    *(__IO uint32_t *)(&((pwm)->DTCTL0_1) + (u32ChannelNum >> 1)) |= PWM_DTCTL0_1_DTEN_Msk | u32Duration;
}

/**
 * @brief Disable Dead zone of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable Dead zone of selected channel.
 *          The write-protection function should be disabled before using this function.
 */
void PWM_DisableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum)
{
    // every two channels shares the same setting
    *(__IO uint32_t *)(&((pwm)->DTCTL0_1) + (u32ChannelNum >> 1)) &= ~PWM_DTCTL0_1_DTEN_Msk;
}

/**
 * @brief Enable capture interrupt of selected channel.
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Edge Rising or falling edge to latch counter.
 *              - \ref PWM_CAPTURE_INT_RISING_LATCH
 *              - \ref PWM_CAPTURE_INT_FALLING_LATCH
 * @return None
 * @details This function is used to enable capture interrupt of selected channel.
 */
void PWM_EnableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge)
{
    (pwm)->CAPIEN |= (u32Edge << u32ChannelNum);
}

/**
 * @brief Disable capture interrupt of selected channel.
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Edge Rising or falling edge to latch counter.
 *              - \ref PWM_CAPTURE_INT_RISING_LATCH
 *              - \ref PWM_CAPTURE_INT_FALLING_LATCH
 * @return None
 * @details This function is used to disable capture interrupt of selected channel.
 */
void PWM_DisableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge)
{
    (pwm)->CAPIEN &= ~(u32Edge << u32ChannelNum);
}

/**
 * @brief Clear capture interrupt of selected channel.
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Edge Rising or falling edge to latch counter.
 *              - \ref PWM_CAPTURE_INT_RISING_LATCH
 *              - \ref PWM_CAPTURE_INT_FALLING_LATCH
 * @return None
 * @details This function is used to clear capture interrupt of selected channel.
 */
void PWM_ClearCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge)
{
    (pwm)->CAPIF = (u32Edge << u32ChannelNum);
}

/**
 * @brief Get capture interrupt of selected channel.
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @retval 0 No capture interrupt
 * @retval 1 Rising edge latch interrupt
 * @retval 2 Falling edge latch interrupt
 * @retval 3 Rising and falling latch interrupt
 * @details This function is used to get capture interrupt of selected channel.
 */
uint32_t PWM_GetCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((((pwm)->CAPIF & (PWM_CAPIF_CFLIF0_Msk << u32ChannelNum)) ? 1 : 0) << 1) | \
            (((pwm)->CAPIF & (PWM_CAPIF_CRLIF0_Msk << u32ChannelNum)) ? 1 : 0));
}
/**
 * @brief Enable duty interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32IntDutyType Duty interrupt type, could be either
 *              - \ref PWM_DUTY_INT_DOWN_COUNT_MATCH_CMP
 *              - \ref PWM_DUTY_INT_UP_COUNT_MATCH_CMP
 * @return None
 * @details This function is used to enable duty interrupt of selected channel.
 */
void PWM_EnableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType)
{
    (pwm)->INTEN0 |= (u32IntDutyType << u32ChannelNum);
}

/**
 * @brief Disable duty interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable duty interrupt of selected channel.
 */
void PWM_DisableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 &= ~((PWM_DUTY_INT_DOWN_COUNT_MATCH_CMP | PWM_DUTY_INT_UP_COUNT_MATCH_CMP) << u32ChannelNum);
}

/**
 * @brief Clear duty interrupt flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear duty interrupt flag of selected channel.
 */
void PWM_ClearDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTSTS0 = (PWM_INTSTS0_CMPUIF0_Msk | PWM_INTSTS0_CMPDIF0_Msk) << u32ChannelNum;
}

/**
 * @brief Get duty interrupt flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return Duty interrupt flag of specified channel
 * @retval 0 Duty interrupt did not occur
 * @retval 1 Duty interrupt occurred
 * @details This function is used to get duty interrupt flag of selected channel.
 */
uint32_t PWM_GetDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return ((((pwm)->INTSTS0 & ((PWM_INTSTS0_CMPDIF0_Msk | PWM_INTSTS0_CMPUIF0_Msk) << u32ChannelNum))) ? 1 : 0);
}

/**
 * @brief This function enable fault brake interrupt
 * @param[in] pwm The pointer of the specified PWM module
 * @param[in] u32BrakeSource Fault brake source.
 *              - \ref PWM_FB_EDGE
 *              - \ref PWM_FB_LEVEL
 * @return None
 * @details This function is used to enable fault brake interrupt.
 *          The write-protection function should be disabled before using this function.
 * @note Every two channels share the same setting.
 */
void PWM_EnableFaultBrakeInt(PWM_T *pwm, uint32_t u32BrakeSource)
{
    (pwm)->INTEN1 |= (0x7 << u32BrakeSource);
}

/**
 * @brief This function disable fault brake interrupt
 * @param[in] pwm The pointer of the specified PWM module
 * @param[in] u32BrakeSource Fault brake source.
 *              - \ref PWM_FB_EDGE
 *              - \ref PWM_FB_LEVEL
 * @return None
 * @details This function is used to disable fault brake interrupt.
 *          The write-protection function should be disabled before using this function.
 * @note Every two channels share the same setting.
 */
void PWM_DisableFaultBrakeInt(PWM_T *pwm, uint32_t u32BrakeSource)
{
    (pwm)->INTEN1 &= ~(0x7 << u32BrakeSource);
}

/**
 * @brief This function clear fault brake interrupt of selected source
 * @param[in] pwm The pointer of the specified PWM module
 * @param[in] u32BrakeSource Fault brake source.
 *              - \ref PWM_FB_EDGE
 *              - \ref PWM_FB_LEVEL
 * @return None
 * @details This function is used to clear fault brake interrupt of selected source.
 *          The write-protection function should be disabled before using this function.
 */
void PWM_ClearFaultBrakeIntFlag(PWM_T *pwm, uint32_t u32BrakeSource)
{
    (pwm)->INTSTS1 = (0x3f << u32BrakeSource);
}

/**
 * @brief This function get fault brake interrupt flag of selected source
 * @param[in] pwm The pointer of the specified PWM module
 * @param[in] u32BrakeSource Fault brake source, could be either
 *              - \ref PWM_FB_EDGE
 *              - \ref PWM_FB_LEVEL
 * @return Fault brake interrupt flag of specified source
 * @retval 0 Fault brake interrupt did not occurred
 * @retval 1 Fault brake interrupt occurred
 * @details This function is used to get fault brake interrupt flag of selected source.
 */
uint32_t PWM_GetFaultBrakeIntFlag(PWM_T *pwm, uint32_t u32BrakeSource)
{
    return (((pwm)->INTSTS1 & (0x3f << u32BrakeSource)) ? 1 : 0);
}

/**
 * @brief Enable period interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32IntPeriodType Period interrupt type. This parameter is not used.
 * @return None
 * @details This function is used to enable period interrupt of selected channel.
 */
void PWM_EnablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum,  uint32_t u32IntPeriodType)
{
    (pwm)->INTEN0 |= (PWM_INTEN0_PIEN0_Msk << u32ChannelNum);
}

/**
 * @brief Disable period interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable period interrupt of selected channel.
 */
void PWM_DisablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 &= ~(PWM_INTEN0_PIEN0_Msk << u32ChannelNum);
}

/**
 * @brief Clear period interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear period interrupt of selected channel.
 */
void PWM_ClearPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTSTS0 = (PWM_INTSTS0_PIF0_Msk << u32ChannelNum);
}

/**
 * @brief Get period interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return Period interrupt flag of specified channel
 * @retval 0 Period interrupt did not occur
 * @retval 1 Period interrupt occurred
 * @details This function is used to get period interrupt of selected channel.
 */
uint32_t PWM_GetPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return ((((pwm)->INTSTS0 & (PWM_INTSTS0_PIF0_Msk << u32ChannelNum))) ? 1 : 0);
}

/**
 * @brief Enable zero interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to enable zero interrupt of selected channel.
 */
void PWM_EnableZeroInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 |= (PWM_INTEN0_ZIEN0_Msk << u32ChannelNum);
}

/**
 * @brief Disable zero interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable zero interrupt of selected channel.
 */
void PWM_DisableZeroInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 &= ~(PWM_INTEN0_ZIEN0_Msk << u32ChannelNum);
}

/**
 * @brief Clear zero interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear zero interrupt of selected channel.
 */
void PWM_ClearZeroIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTSTS0 = (PWM_INTSTS0_ZIF0_Msk << u32ChannelNum);
}

/**
 * @brief Get zero interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return Zero interrupt flag of specified channel
 * @retval 0 Zero interrupt did not occur
 * @retval 1 Zero interrupt occurred
 * @details This function is used to get zero interrupt of selected channel.
 */
uint32_t PWM_GetZeroIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return ((((pwm)->INTSTS0 & (PWM_INTSTS0_ZIF0_Msk << u32ChannelNum))) ? 1 : 0);
}

/**
 * @brief Enable interrupt flag accumulator of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32IntFlagCnt Interrupt flag counter. Valid values are between 0~15.
 * @param[in] u32IntAccSrc Interrupt flag accumulator source selection.
 *              - \ref PWM_IFA_EVEN_ZERO_POINT
 *              - \ref PWM_IFA_EVEN_PERIOD_POINT
 *              - \ref PWM_IFA_EVEN_COMPARE_UP_COUNT_POINT
 *              - \ref PWM_IFA_EVEN_COMPARE_DOWN_COUNT_POINT
 *              - \ref PWM_IFA_ODD_ZERO_POINT
 *              - \ref PWM_IFA_ODD_PERIOD_POINT
 *              - \ref PWM_IFA_ODD_COMPARE_UP_COUNT_POINT
 *              - \ref PWM_IFA_ODD_COMPARE_DOWN_COUNT_POINT
 * @return None
 * @details This function is used to enable interrupt flag accumulator of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_EnableAcc(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntFlagCnt, uint32_t u32IntAccSrc)
{
    (pwm)->IFA = ((pwm)->IFA & ~((PWM_IFA_IFCNT0_1_Msk | PWM_IFA_IFSEL0_1_Msk) << ((u32ChannelNum >> 1) * 8))) | \
                 ((PWM_IFA_IFAEN0_1_Msk | (u32IntAccSrc << PWM_IFA_IFSEL0_1_Pos) | u32IntFlagCnt) << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Disable interrupt flag accumulator of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to Disable interrupt flag accumulator of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_DisableAcc(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->IFA = (pwm)->IFA & ~(PWM_IFA_IFAEN0_1_Msk << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Enable interrupt flag accumulator interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to enable interrupt flag accumulator interrupt of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_EnableAccInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 |= (PWM_INTEN0_IFAIEN0_1_Msk << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Disable interrupt flag accumulator interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to disable interrupt flag accumulator interrupt of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_DisableAccInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTEN0 &= ~(PWM_INTEN0_IFAIEN0_1_Msk << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Clear interrupt flag accumulator interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear interrupt flag accumulator interrupt of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_ClearAccInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->INTSTS0 = (PWM_INTSTS0_IFAIF0_1_Msk << ((u32ChannelNum >> 1) * 8));
}

/**
 * @brief Get interrupt flag accumulator interrupt of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @retval 0 Accumulator interrupt did not occur
 * @retval 1 Accumulator interrupt occurred
 * @details This function is used to Get interrupt flag accumulator interrupt of selected channel.
 * @note Every two channels share the same setting.
 */
uint32_t PWM_GetAccInt(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((pwm)->INTSTS0 & (PWM_INTSTS0_IFAIF0_1_Msk << ((u32ChannelNum >> 1) * 8))) ? 1 : 0);
}

/**
 * @brief Clear free trigger duty interrupt flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear free trigger duty interrupt flag of selected channel.
 */
void PWM_ClearFTDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->FTCI = ((PWM_FTCI_FTCMU0_Msk | PWM_FTCI_FTCMD0_Msk) << (u32ChannelNum >> 1));
}

/**
 * @brief Get free trigger duty interrupt flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return Duty interrupt flag of specified channel
 * @retval 0 Free trigger duty interrupt did not occur
 * @retval 1 Free trigger duty interrupt occurred
 * @details This function is used to get free trigger duty interrupt flag of selected channel.
 */
uint32_t PWM_GetFTDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((pwm)->FTCI & ((PWM_FTCI_FTCMU0_Msk | PWM_FTCI_FTCMD0_Msk) << (u32ChannelNum >> 1))) ? 1 : 0);
}

/**
 * @brief Enable load mode of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32LoadMode PWM counter loading mode.
 *              - \ref PWM_LOAD_MODE_IMMEDIATE
 *              - \ref PWM_LOAD_MODE_WINDOW
 *              - \ref PWM_LOAD_MODE_CENTER
 * @return None
 * @details This function is used to enable load mode of selected channel.
 */
void PWM_EnableLoadMode(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32LoadMode)
{
    (pwm)->CTL0 |= (u32LoadMode << u32ChannelNum);
}

/**
 * @brief Disable load mode of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32LoadMode PWM counter loading mode.
 *              - \ref PWM_LOAD_MODE_IMMEDIATE
 *              - \ref PWM_LOAD_MODE_WINDOW
 *              - \ref PWM_LOAD_MODE_CENTER
 * @return None
 * @details This function is used to disable load mode of selected channel.
 */
void PWM_DisableLoadMode(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32LoadMode)
{
    (pwm)->CTL0 &= ~(u32LoadMode << u32ChannelNum);
}

/**
 * @brief Configure synchronization phase of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32SyncSrc PWM synchronize source selection.
 *              - \ref PWM_SYNC_OUT_FROM_SYNCIN_SWSYNC
 *              - \ref PWM_SYNC_OUT_FROM_COUNT_TO_ZERO
 *              - \ref PWM_SYNC_OUT_FROM_COUNT_TO_COMPARATOR
 *              - \ref PWM_SYNC_OUT_DISABLE
 * @param[in] u32Direction Phase direction. Control PWM counter count decrement or increment  after synchronizing.
 *              - \ref PWM_PHS_DIR_DECREMENT
 *              - \ref PWM_PHS_DIR_INCREMENT
 * @param[in] u32StartPhase Synchronous start phase value. Valid values are between 0~65535.
 * @return None
 * @details This function is used to configure synchronization phase of selected channel.
 * @note Every two channels share the same setting.
 */
void PWM_ConfigSyncPhase(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32SyncSrc, uint32_t u32Direction, uint32_t u32StartPhase)
{
    // every two channels shares the same setting
    u32ChannelNum >>= 1;
    (pwm)->SYNC = (((pwm)->SYNC & ~((PWM_SYNC_SINSRC0_Msk << (u32ChannelNum << 1)) | (PWM_SYNC_PHSDIR0_Msk << u32ChannelNum))) | \
                   (u32Direction << PWM_SYNC_PHSDIR0_Pos << u32ChannelNum) | (u32SyncSrc << PWM_SYNC_SINSRC0_Pos) << (u32ChannelNum << 1));
    *(__IO uint32_t *)(&((pwm)->PHS0_1) + u32ChannelNum) = u32StartPhase;
}


/**
 * @brief Enable SYNC phase of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to enable SYNC phase of selected channel(s).
 * @note Every two channels share the same setting.
 */
void PWM_EnableSyncPhase(PWM_T *pwm, uint32_t u32ChannelMask)
{
    uint32_t i;
    for(i = 0; i < PWM_CHANNEL_NUM; i ++)
    {
        if(u32ChannelMask & (1 << i))
        {
            (pwm)->SYNC |= (PWM_SYNC_PHSEN0_Msk << (i >> 1));
        }
    }
}

/**
 * @brief Disable SYNC phase of selected channel(s)
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to disable SYNC phase of selected channel(s).
 * @note Every two channels share the same setting.
 */
void PWM_DisableSyncPhase(PWM_T *pwm, uint32_t u32ChannelMask)
{
    uint32_t i;
    for(i = 0; i < PWM_CHANNEL_NUM; i ++)
    {
        if(u32ChannelMask & (1 << i))
        {
            (pwm)->SYNC &= ~(PWM_SYNC_PHSEN0_Msk << (i >> 1));
        }
    }
}

/**
 * @brief Enable PWM SYNC_IN noise filter function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ClkCnt SYNC Edge Detector Filter Count. This controls the counter number of edge detector.
 *            The valid value is 0~7.
 * @param[in] u32ClkDivSel SYNC Edge Detector Filter Clock Selection.
 *              - \ref PWM_NF_CLK_DIV_1
 *              - \ref PWM_NF_CLK_DIV_2
 *              - \ref PWM_NF_CLK_DIV_4
 *              - \ref PWM_NF_CLK_DIV_8
 *              - \ref PWM_NF_CLK_DIV_16
 *              - \ref PWM_NF_CLK_DIV_32
 *              - \ref PWM_NF_CLK_DIV_64
 *              - \ref PWM_NF_CLK_DIV_128
 * @return None
 * @details This function is used to enable PWM SYNC_IN noise filter function.
 */
void PWM_EnableSyncNoiseFilter(PWM_T *pwm, uint32_t u32ClkCnt, uint32_t u32ClkDivSel)
{
    (pwm)->SYNC = ((pwm)->SYNC & ~(PWM_SYNC_SFLTCNT_Msk | PWM_SYNC_SFLTCSEL_Msk)) | \
                  ((u32ClkCnt << PWM_SYNC_SFLTCNT_Pos) | (u32ClkDivSel << PWM_SYNC_SFLTCSEL_Pos) | PWM_SYNC_SNFLTEN_Msk);
}

/**
 * @brief Disable PWM SYNC_IN noise filter function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @return None
 * @details This function is used to Disable PWM SYNC_IN noise filter function.
 */
void PWM_DisableSyncNoiseFilter(PWM_T *pwm)
{
    (pwm)->SYNC &= ~PWM_SYNC_SNFLTEN_Msk;
}

/**
 * @brief Enable PWM SYNC input pin inverse function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @return None
 * @details This function is used to enable PWM SYNC input pin inverse function.
 */
void PWM_EnableSyncPinInverse(PWM_T *pwm)
{
    (pwm)->SYNC |= PWM_SYNC_SINPINV_Msk;
}

/**
 * @brief Disable PWM SYNC input pin inverse function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @return None
 * @details This function is used to Disable PWM SYNC input pin inverse function.
 */
void PWM_DisableSyncPinInverse(PWM_T *pwm)
{
    (pwm)->SYNC &= ~PWM_SYNC_SINPINV_Msk;
}

/**
 * @brief Set PWM clock source
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32ClkSrcSel PWM external clock source.
 *              - \ref PWM_CLKSRC_PWM_CLK
 *              - \ref PWM_CLKSRC_TIMER0
 *              - \ref PWM_CLKSRC_TIMER1
 *              - \ref PWM_CLKSRC_TIMER2
 *              - \ref PWM_CLKSRC_TIMER3
 * @return None
 * @details This function is used to set PWM clock source.
 * @note Every two channels share the same setting.
 */
void PWM_SetClockSource(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32ClkSrcSel)
{
    (pwm)->CLKSRC = (pwm)->CLKSRC & ~(PWM_CLKSRC_ECLKSRC0_Msk << ((u32ChannelNum >> 1) * PWM_CLKSRC_ECLKSRC2_Pos)) | \
                    (u32ClkSrcSel << ((u32ChannelNum >> 1) * PWM_CLKSRC_ECLKSRC2_Pos));
}

/**
 * @brief Enable PWM brake noise filter function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32BrakePinNum Brake pin selection. Valid values are 0 or 1.
 * @param[in] u32ClkCnt SYNC Edge Detector Filter Count. This controls the counter number of edge detector
 * @param[in] u32ClkDivSel SYNC Edge Detector Filter Clock Selection.
 *              - \ref PWM_NF_CLK_DIV_1
 *              - \ref PWM_NF_CLK_DIV_2
 *              - \ref PWM_NF_CLK_DIV_4
 *              - \ref PWM_NF_CLK_DIV_8
 *              - \ref PWM_NF_CLK_DIV_16
 *              - \ref PWM_NF_CLK_DIV_32
 *              - \ref PWM_NF_CLK_DIV_64
 *              - \ref PWM_NF_CLK_DIV_128
 * @return None
 * @details This function is used to enable PWM brake noise filter function.
 */
void PWM_EnableBrakeNoiseFilter(PWM_T *pwm, uint32_t u32BrakePinNum, uint32_t u32ClkCnt, uint32_t u32ClkDivSel)
{
    (pwm)->BNF = ((pwm)->BNF & ~((PWM_BNF_BRK0FCNT_Msk | PWM_BNF_BRK0NFSEL_Msk) << (u32BrakePinNum * PWM_BNF_BRK1NFEN_Pos))) | \
                 (((u32ClkCnt << PWM_BNF_BRK0FCNT_Pos) | (u32ClkDivSel << PWM_BNF_BRK0NFSEL_Pos) | PWM_BNF_BRK0NFEN_Msk) << (u32BrakePinNum * PWM_BNF_BRK1NFEN_Pos));
}

/**
 * @brief Disable PWM brake noise filter function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32BrakePinNum Brake pin selection. Valid values are 0 or 1.
 * @return None
 * @details This function is used to disable PWM brake noise filter function.
 */
void PWM_DisableBrakeNoiseFilter(PWM_T *pwm, uint32_t u32BrakePinNum)
{
    (pwm)->BNF &= ~(PWM_BNF_BRK0NFEN_Msk << (u32BrakePinNum * PWM_BNF_BRK1NFEN_Pos));
}

/**
 * @brief Enable PWM brake pin inverse function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32BrakePinNum Brake pin selection. Valid values are 0 or 1.
 * @return None
 * @details This function is used to enable PWM brake pin inverse function.
 */
void PWM_EnableBrakePinInverse(PWM_T *pwm, uint32_t u32BrakePinNum)
{
    (pwm)->BNF |= (PWM_BNF_BRK0PINV_Msk << (u32BrakePinNum * PWM_BNF_BRK1NFEN_Pos));
}

/**
 * @brief Disable PWM brake pin inverse function
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32BrakePinNum Brake pin selection. Valid values are 0 or 1.
 * @return None
 * @details This function is used to disable PWM brake pin inverse function.
 */
void PWM_DisableBrakePinInverse(PWM_T *pwm, uint32_t u32BrakePinNum)
{
    (pwm)->BNF &= ~(PWM_BNF_BRK0PINV_Msk << (u32BrakePinNum * PWM_BNF_BRK1NFEN_Pos));
}

/**
 * @brief Set PWM brake pin source
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32BrakePinNum Brake pin selection. Valid values are 0 or 1.
 * @param[in] u32SelAnotherModule Select to another module. Valid values are TRUE or FALSE.
 * @return None
 * @details This function is used to set PWM brake pin source.
 * @note This function is only supported in M45xD/M45xC.
 */
void PWM_SetBrakePinSource(PWM_T *pwm, uint32_t u32BrakePinNum, uint32_t u32SelAnotherModule)
{
    (pwm)->BNF = ((pwm)->BNF & ~(PWM_BNF_BK0SRC_Msk << (u32BrakePinNum * 8))) | (u32SelAnotherModule << (PWM_BNF_BK0SRC_Pos + u32BrakePinNum * 8));
}

/**
 * @brief Get the time-base counter reached its maximum value flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return Count to max interrupt flag of specified channel
 * @retval 0 Count to max interrupt did not occur
 * @retval 1 Count to max interrupt occurred
 * @details This function is used to get the time-base counter reached its maximum value flag of selected channel.
 */
uint32_t PWM_GetWrapAroundFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    return (((pwm)->STATUS & (PWM_STATUS_CNTMAXF0_Msk << u32ChannelNum)) ? 1 : 0);
}

/**
 * @brief Clear the time-base counter reached its maximum value flag of selected channel
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @return None
 * @details This function is used to clear the time-base counter reached its maximum value flag of selected channel.
 */
void PWM_ClearWrapAroundFlag(PWM_T *pwm, uint32_t u32ChannelNum)
{
    (pwm)->STATUS = (PWM_STATUS_CNTMAXF0_Msk << u32ChannelNum);
}


/*@}*/ /* end of group PWM_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group PWM_Driver */

/*@}*/ /* end of group Standard_Driver */

/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/