{
  "knxUltimateHueLight": {
    "title": "Hue node",
    "node-input-name": "Name",
    "node-input-nameLightSwitch": "Switch (bit)",
    "node-input-GALightSwitch": "GA",
    "node-input-dptLightSwitch": "dpt",
    "node-input-nameLightState": "State (bit)",
    "node-input-GALightState": "GA",
    "node-input-dptLightState": "dpt",
    "node-input-hueLight": "Hue light",
    "paletteLabel": "Hue Light/Outlet",
    "no_devices": "No Hue devices found. Click refresh after pairing a new light.",
    "tabs": {
      "switch": "Switch",
      "dim": "Dim",
      "tunable_white": "Tunable white",
      "rgb_hsv": "RGB/HSV",
      "effects": "Effects",
      "behaviour": "Behaviour"
    },
    "control": "Control",
    "status": "Status",
    "night_lighting": "Night Lighting",
    "no_night_lighting": "No night lighting",
    "get_current": "Get current",
  "get_again": "Get again",
  "wait": "Wait...",
  "locate_no_bridge": "Select a Hue bridge first",
  "locate_no_device": "Select a Hue device first",
  "locate_success": "Locate command sent",
  "locate_started": "Locate mode started. Press again to stop (auto-stops after 10 minutes).",
  "locate_stopped": "Locate mode stopped.",
  "locate_start_title": "Locate selected Hue device",
  "locate_stop_title": "Stop locate mode",
  "locate_error": "Unable to locate Hue device",
    "day_night": "Day/Night",
    "invert_day_night": "Invert day/night value",
    "override_night_mode": "Force day mode",
    "override_no": "No",
    "override_set_day_fast_this": "Switch to DAY mode by rapid switching the light off then on (this light only)",
    "override_set_day_fast_all": "Switch to DAY mode by rapid switching the light off then on (apply to ALL light nodes)",
    "node_pins": "Node Input/Output PINs",
    "node_pins_hide": "Hide",
    "node_pins_show": "Show node input/output PINs",
    "read_status_startup": "Read status at startup",
    "opt_no": "No",
    "opt_yes_emit": "Yes, and emit KNX telegrams.",
    "knx_brightness_status": "KNX Brightness Status",
    "knx_brightness_onhueoff": "When Hue light is Off send 0%. When Hue On, restore previous value (Default KNX behaviour)",
    "knx_brightness_no": "Leave as is (default Hue behaviour)",
    "update_local_state_from_knx_write": "Update local cached Hue state from KNX bus writes",
    "update_local_state_from_knx_write_hint": "Enabled: faster local reactions and consistent immediate KNX read responses. Disabled: keep the cache aligned only with real Hue bridge events.",
    "use_min_brightness": "Use minimum brightness specified in the Hue light",
    "k_suffix": "K",
    "temp_desc_2200": "(start of Philips White Ambiance lights range)",
    "temp_desc_2700": "(warm white, intimate, cozy, personal, for living rooms)",
    "temp_desc_3000": "(soft white, warm, calming, for bathrooms and kitchens)",
    "temp_desc_3500_day": "(neutral white, balanced, friendly, inviting, for office spaces and retail)",
    "temp_desc_3500_night": "(not recommended for night time - neutral white, for office spaces and retail)",
    "temp_desc_4100_day": "(cool white, precise, clean, focused, for garages and grocery stores)",
    "temp_desc_4100_night": "(not recommended for night time - cool white, precise, clean, focused, for garages and grocery stores)",
    "temp_desc_5000_day": "(bright white, vibrant, crisp, for warehouses, sports stadiums and healthcare)",
    "temp_desc_5000_night": "(not recommended for night time - bright white, vibrant, crisp, for warehouses, sports stadiums and healthcare)",
    "temp_desc_6500_day": "(daylight, alert, energetic, for indoor agriculture)",
    "temp_desc_6500_night": "(not recommended for night time - daylight, alert, energetic, for indoor agriculture)",
    "switch_on_behaviour": "Switch on behaviour",
    "none": "None",
    "switch_off": "(Switch Off)",
    "select_color": "Select color",
    "select_temperature_brightness": "Select temperature and brightness",
    "select_brightness": "Select brightness",
    "effect_command": "Effect command",
    "effect_status": "Effect status",
    "effect_mapping": "Mappings",
    "effect_autofill": "Fill with available effects",
    "effect_tip": "Provide KNX value / Hue effect pairs. When the incoming KNX payload matches the value, the selected effect is applied to the light.",
    "effect_tip_status": "If a status group address is configured, the current Hue effect is emitted using the mapped KNX value or the effect name.",
    "effect_not_supported": "This light does not expose Hue effects.",
    "effect_knx_value_placeholder": "Value to match",
    "effect_base_label": "Non-Hue basic effects",
    "effect_native_label": "Hue native effects"
  },
  "common": {
    "ga": "GA",
    "dpt": "DPT",
    "name": "Name",
    "youtube_sample": "Youtube sample",
    "knx_gw": "KNX GW",
    "hue_bridge": "Hue Bridge",
    "philips_hue": "Philips HUE",
    "read": "Read"
  }
}