{
"knxUltimate": {
"paletteLabel": "KNX 设备",
"deployfirst": "请创建您的第一个网关，然后进行部署，然后重新打开此窗口。",
"title": "KNX 设备节点",
"properties": {
"node-input-server": "网关",
"node-input-topic": "组地址.",
"node-input-outputtopic": "主题名",
"node-input-dpt": "数据类型",
"node-input-initialread": "当初始化连接/重新连接的时候发送读取消息",
"node-input-initialread0": "不启用",
"node-input-initialread1": "从KNX BUS读取数据 (to receive the response from BUS, enable also -反馈组地址响应的事件-)",
"node-input-initialread2": "读取断开连接前保存到文件的最后一个值",
"node-input-initialread3": "读取断开连接前保存到文件的最后一个值，如果没有这个文件从KNX BUS读取数据 (to receive the response from BUS, enable also -反馈组地址响应的事件-)",
"node-input-notifyreadrequest": "反馈组地址读取的事件",
"node-input-notifyresponse": "反馈组地址响应的事件",
"node-input-notifywrite": "反馈组地址写入的事件",
"node-input-notifyreadrequestalsorespondtobus": "自动发送节点值作为对总线的响应",
"node-input-notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "如果数据没有定义，发送",
"node-input-listenallga": "通用模式 (监听所有信息)",
"node-input-name": "节点名字",
"node-input-outputtype": "输出类型",
"node-input-outputRBE": "只有数据改变的时候才发送到总线 (RBE 过滤器)",
"node-input-periodicSend": "周期发送已存储的值到 KNX（循环写入）",
"node-input-periodicSendInterval": "间隔（秒）",
"node-input-inputRBE": "只有数据改变的时候才接收数据 (RBE 过滤器)",
"node-input-formatmultiplyvalue": "乘",
"node-input-formatnegativevalue": "负数",
"node-input-formatdecimalsvalue": "小数",
"node-input-passthrough": "输入直通",
"rbe_filter": "RBE 过滤器"
},
"placeholder": {
"leaveempty": "如果留空则使用组地址",
"search": "开始输入以搜索",
"notifyreadrequestalsorespondtobusdefaultvalueifnotinitialized": "案例: 0 是 false, 1 是 true, 否则是任意值"
},
"button": {
"enable": "在编辑器中显示手动命令按钮",
"mode": "按钮操作",
"mode_read": "发送 KNX Read",
"mode_toggle": "Toggle boolean",
"mode_value": "写入自定义值",
"toggleInitial": "初始切换状态",
"toggleInitial_true": "初始值为 开 (true)",
"toggleInitial_false": "初始值为 关 (false)",
"value": "自定义值"
},
"headings": {
"from_input_to_bus": "从节点输入引脚到 KNX 总线",
"from_bus_to_output": "从 KNX 总线到节点输出引脚"
},
"snippets": {
"searchGA": "搜索 GA",
"select": "选择要插入的代码片段",
"searchPlaceholder": "开始输入以搜索...",
"emptyPlaceholder": "暂无可用片段"
},
"dptDetails": {
"toggle": "详情",
"noSample": "当前没有可用示例。",
"linkExample": "查看 {{dpt}} 的更多详情",
"linkWiki": "打开 Wiki"
},
"advanced": {
"Advancedoptions": "高级选项",
"Formatting": "格式化输入 (来自 KNX 总线的数据报)",
"Operations": "数值 (操作按顺序执行)",
"OUTPUT": "输出 (发送 KNX 数据报至总线)",
"INPUT": "输入 (监听 KNX 总线的数据报)",
"NUMERICVALUES": "数值 (操作按顺序执行)",
"noETSWarning": "你还没有导入ETS csv文件.
该节点将作为盲发送器/接收器工作. 点击这个连接寻求帮助.",
"notify-DPT3007": "你选择了相对调光类型. 请 点击这个连接参考案例 并学习如何处理此类消息.",
"notify-DPT18001": "你选择了场景类型. 请 点击这个连接参考案例 并学习如何处理此类消息.",
"notify-NoETSFile": "通用模式需要有效的 ETS 文件才能解码数据类型和输出设备名称。 请将 ETS 文件粘贴到配置节点中。 如果您不使用 ETS 文件，该节点将作为盲接收器工作（自动对数据报进行解码），但您需要在输入消息中传递数据类型（除了值）才能向 KNX BUS 发送某些内容 .",
"notify-DPT232600": "你选择了RGB调光类型. 请 点击这个连接参考案例 并学习如何处理此类消息.",
"notify-DPT251600": "你选择了RGBW调光类型. 请 点击这个连接参考案例 并学习如何处理此类消息.",
"notify-DPT222": "你选择了3x16 bit类型. 请 点击这个连接参考案例 并学习如何处理此类消息.",
"divVediEsempi": " 请花费5分钟的时间学习一下案例",
"Sample": "关于数据类型（DPT）的帮助案例"
},
"selectlists": {
"Output_write": "写入",
"Output_response": "响应",
"Output_read": "读取",
"Output_update": "没有输出。仅更新（更新值而不向 KNX 总线发送任何电报）",
"SetTopic_str": "三级",
"SetTopic_listenAllGA": "通用模式（侦听所有组地址）",
"SetTopic_flow": "Flow",
"SetTopic_global": "全局",
"SetTopic_env": "$Env 变量",
"Multiply_leave": "保持不变(默认值)",
"Multiply_divide1000": " 除以 1000",
"Multiply_divide100": " 除以 100",
"Multiply_divide10": " 除以 10",
"Multiply_multiply1000": "乘以 1000",
"Multiply_multiply100": "乘以 100",
"Multiply_multiply10": "乘以 10",
"Decimals_leave": "保持不变(默认值)",
"Decimals_roundint": "取整 ",
"Decimals_round1": "保留 1 个小数点",
"Decimals_round2": "保留 2 个小数点",
"Decimals_round3": "保留 3 个小数点",
"Decimals_round4": "保留 4 个小数点",
"Negatives_leave": "保持不变(默认值)",
"Negatives_zero": "输出0",
"Negatives_abs": "输出绝对值 (去除负号)",
"passthrough_No": "No",
"passthrough_Leave": "Yes",
"passthrough_OwnProp": "是的，但将输入消息放入输出消息的 msg.inputmessage 属性中",
"RBE_out_enable": "启用（仅在负载变化时发送到 KNX）",
"RBE_out_disable": "禁用",
"RBE_in_enable": "启用（仅在负载变化时响应）",
"RBE_in_disable": "禁用"
},
"manualReadOk": "已发送 KNX 读取请求",
"manualReadError": "无法发送 KNX 读取请求",
"manualWriteOk": "已发送 KNX 命令",
"manualWriteError": "无法发送 KNX 命令"
}
}