{
	"common":
	{
		"_version_common": "2022.11.08",
		"gateway": "Gateway",
		"riser-private": "Private riser",
		"riser-localbus-01": "Local bus 1",
		"riser-localbus-02": "Local bus 2",
		"riser-localbus-03": "Local bus 3",
		"riser-localbus-04": "Local bus 4",
		"riser-localbus-05": "Local bus 5",
		"riser-localbus-06": "Local bus 6",
		"riser-localbus-07": "Local bus 7",
		"riser-localbus-08": "Local bus 8",
		"riser-localbus-09": "Local bus 9",
		"riser-localbus-10": "Local bus 10",
		"riser-localbus-11": "Local bus 11",
		"riser-localbus-12": "Local bus 12",
		"riser-localbus-13": "Local bus 13",
		"riser-localbus-14": "Local bus 14",
		"riser-localbus-15": "Local bus 15",
		"input-label-simple": "simple mode ('payload' or 'payload.state')",
		"name": "Name",
		"topic": "Topic",
		"topic-info": "to trigger the action on this node, do not forget the incoming 'msg' MUST contain a 'msg.topic' which is either 'state/__topicName__' (when used in read-only mode) or 'cmd/__topicName__' (when used in write mode), otherwise node will skip incoming message.",
		"option-smartfilter": "SmartFilter",
		"option-smartfilter-checkbox": "Filter incoming gateway events",
		"option-smartfilter-info": "SmartFilter is enabled by default, making the node only triggering a new flow (aka output) when a state CHANGED after a MyHome BUS message was received.\nThis is made to avoid multiple flows starting for the same info/command, because MyHome sends the same message multiple times (for status request, response,...) \n\nNote: SmartFilter is never applied when node is running in read-only (status update request) mode.",
		"option-smartfilter-out-checkbox": "Filter outgoing commands sent to gateway",
		"option-skipevents": "Skip events",
		"option-skipevents-checkbox": "Skip ALL incoming gateway events",
		"option-skipevents-info": "If necessary, all MyHome status updates received from the gateway about this node can be ignored, which means only Node-RED received payloads will be processed.",
		"option-readonly": "Read-only",
		"option-readonly-checkbox": "Only ask for current load status",
		"option-readonly-info": "When enabled, the received payload (being 'ON', 'OFF', or whatever) is ignored and a status request is sent to gather current state without applying any change.",
		"secondary-output-title": "Secondary output options",
		"secondary-output-intro": "You may fine-tune the secondary output to better suit your needs when integrating with other node mechanisms (see node help for more info).",
		"secondary-output-name": "Property name",
		"secondary-output-name-placeholder": "e.g. On / state / ... / (empty)",
		"secondary-output-name-info": "Is the property name on the returned payload (i.e. payload.propertyname). When left empty, the payload is returned as a single value (i.e. not as an object)",
		"secondary-output-content": "Data type"
	},



	"mh-thzone":
	{
		"config":
		{
			"name-placeholder": "Zone identifier",
			"topic-placeholder": "e.g. firstfloor",
			"zoneid": "Zone",
			"thermo-onconnect-refreshstate":"Reload",
			"thermo-onconnect-refreshstate-checkbox":"Ask for Zone state refresh on connect",
			"thermo-onconnect-refreshstate-info":"Each time the node is deployed (and thus also on node-RED start-up), ask for Zone status refresh. This will will also trigger new flows accordingly.",
			"secondary-output-content-textstate": ".state (number: °C)",
			"secondary-output-content-settemp": ".setTemperature (number: °C)",
			"secondary-output-content-optype-ownvalue": ".operationType_ownValue (string: see doc)",
			"secondary-output-content-optype": ".operationType (string: see doc)",
			"secondary-output-content-opmode-ownvalue": ".operationMode_ownValue (string: see doc)",
			"secondary-output-content-opmode": ".operationMode (string: see doc)",
			"secondary-output-content-offset-ownvalue": ".localOffset_ownValue (string: see doc)",
			"secondary-output-content-offset": ".localOffset (string/number: see doc)",
			"secondary-output-content-actuatorstates-on": ".actuatorStates.On (boolean: true / false)"
		},
		"node":
		{
			"status-optype-conditioning": "Conditioning",
			"status-optype-heating": "Heating",
			"status-optype-antifreeze": "Antifreeze",
			"status-optype-thermalprotect": "Thermal Protection",
			"status-optype-genoff": "Generic OFF",
			"status-localoffset-off": "Local OFF",
			"status-localoffset-protect": "Local protection",
			"status-opmode-antifreeze": "Antifreeze",
			"status-opmode-off-heating": "Off Heating",
			"status-opmode-manual-heating": "Manual Heating",
			"status-opmode-auto-heating": "Automatic Heating",
			"status-opmode-thermal-protect": "Thermal Protection",
			"status-opmode-off-conditioning": "Off Conditioning",
			"status-opmode-manual-conditioning": "Manual Conditioning",
			"status-opmode-auto-conditioning": "Automatic Conditioning"
		}
	}
}