{
    "rdk-gpio": {
        "label": {
            "gpiopin": "GPIO",
            "selectpin": "选择针脚",
            "resistor": "电阻?",
            "readinitial": "在部署/重启时读取针脚状态?",
            "type": "类型",
            "initpin": "初始化针脚状态?",
            "debounce": "去抖动",
            "freq": "频率",
            "button": "按钮",
            "pimouse": "鼠标",
            "pikeyboard": "键盘",
            "left": "左键",
            "right": "右键",
            "middle": "滚轮"
        },
        "resistor": {
            "none": "无",
            "pullup": "上拉",
            "pulldown": "下拉"
        },
        "digout": "数字输出",
        "softpwm": "模拟PWM",
        "pwmout": "PWM输出",
        "servo": "伺服输出",
        "initpin0": "初始化针脚 - 低电平 (0)",
        "initpin1": "初始化针脚 - 高电平 (1)",
        "left": "左键",
        "right": "右键",
        "middle": "滚轮",
        "any": "任意按键",
        "pinname": "针脚",
        "alreadyuse": "已被占用",
        "alreadyset": "已被设置",
        "tip": {
            "pin": "<b>已使用的针脚</b>: ",
            "in": "提示: 仅支持数字输入，且输入值必须是 0 或 1。",
            "dig": "提示: 仅支持数字输出，且输入值必须是 0 或 1。",
            "pwm": "提示: 支持PWM输出， 且输入值必须是 0 到 100之间的整数。",
            "ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
        },
        "types": {
            "digout": "数字输出",
            "input": "输入",
            "pullup": "上拉电阻输入",
            "pulldown": "下拉电阻输入",
            "softpwm": "模拟PWM输出",
            "pwmout": "PWM输出",
            "servo": "Servo output"
        },
        "status": {
            "stopped": "已停止",
            "closed": "已关闭",
            "not-running": "未运行",
            "not-available": "不可用",
            "na": "N/A : __value__",
            "ok": "OK"
        },
        "errors": {
            "ignorenode": "忽略节点",
            "version": "查看RDK类型失败",
            "sawpitype": "查看RDK类型",
            "libnotfound": "未找到GPIO库",
            "alreadyset": "GPIO针脚 __pin__ 已经被设置为: __type__ 类型",
            "invalidpin": "无效GPIO针脚",
            "invalidinput": "无效输入",
            "needtobeexecutable": "__command__ 需要是可执行程序",
            "mustbeexecutable": "GPIO指令必须是可执行程序 ",
            "commandnotfound": "GPIO指令未找到 ",
            "commandnotexecutable": "GPIO指令未正常运行 ",
            "error": "错误: __error__",
            "pythoncommandnotfound": "python GPIO未找到"
        }
    }
}