\section{s:lexical-conventions}{Lexical conventions}
%HEVEA\cutname{lex.html}

\subsubsection*{sss:lex:text-encoding}{Source file encoding}

OCaml source files are expected to be valid UTF-8 encoded Unicode text.
The interpretation of source files which are not UTF-8 encoded is unspecified.
Such source files may be rejected in the future.

\subsubsection*{sss:lex:blanks}{Blanks}

The following characters are considered as blanks: space,
horizontal tabulation, carriage return, line feed and form feed. Blanks are
ignored, but they separate adjacent identifiers, literals and
keywords that would otherwise be confused as one single identifier,
literal or keyword.

\subsubsection*{sss:lex:comments}{Comments}

Comments are introduced by the two characters  @"(*"@, with no
intervening blanks, and terminated by the characters @"*)"@, with
no intervening blanks. Comments are treated as blank characters.
Comments do not occur inside string or character literals. Nested
comments are handled correctly.

\begin{caml_example}{verbatim}
(* single line comment *)

(* multiple line comment, commenting out part of a program, and containing a
nested comment:
let f = function
  | 'A'..'Z' -> "Uppercase"
    (* Add other cases later... *)
*)
\end{caml_example}

\subsubsection*{sss:lex:identifiers}{Identifiers}

\begin{syntax}
ident: (letter || "_") { letter || "0"\ldots"9" || "_" || "'" } ;
capitalized-ident: uppercase-letter { letter || "0"\ldots"9" || "_" || "'" } ;
lowercase-ident:
   (lowercase-letter || "_") { letter || "0"\ldots"9" || "_" || "'" } ;
letter: uppercase-letter || lowercase-letter ;
lowercase-letter:
"a"\ldots"z"  || 'U+00DF' \ldots 'U+00F6' || 'U+00F8' \dots 'U+00FF' || 'U+0153' || 'U+0161' || 'U+017E'  ;
uppercase-letter:
  "A"\ldots"Z" || 'U+00C0' \ldots 'U+00D6' || 'U+00D8' \ldots 'U+00DE' \\
  || 'U+0152' || 'U+0160' || 'U+017D' || 'U+0178' || 'U+1E9E'
 ;
\end{syntax}

Identifiers are sequences of letters, digits, "_" (the underscore
character), and "'" (the single quote), starting with a
letter or an underscore.
Letters contain the 52 lowercase and uppercase letters from the ASCII set,
letters "ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýþÿ" from
the Latin-1 Supplement block, letters "ŠšŽžŒœŸ" from the Latin Extended-A block
and upper case ẞ ("U+189E"). Any byte sequence which is equivalent to one of
these Unicode characters under NFC\footnote{Normalization Form C} is supported
too.

All characters in an identifier are
meaningful. The current implementation accepts identifiers up to
16000000 characters in length.

In many places, OCaml makes a distinction between capitalized
identifiers and identifiers that begin with a lowercase letter.  The
underscore character is considered a lowercase letter for this
purpose.

\subsubsection*{sss:integer-literals}{Integer literals}

\begin{syntax}
integer-literal:
          ["-"] ("0"\ldots"9") { "0"\ldots"9" || "_" }
        | ["-"] ("0x" || "0X") ("0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f")
                            { "0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f" || "_" }
        | ["-"] ("0o" || "0O") ("0"\ldots"7") { "0"\ldots"7" || "_" }
        | ["-"] ("0b" || "0B") ("0"\ldots"1") { "0"\ldots"1" || "_" }
;
int32-literal: integer-literal 'l'
;
int64-literal: integer-literal 'L'
;
nativeint-literal: integer-literal 'n'
\end{syntax}

An integer literal is a sequence of one or more digits, optionally
preceded by a minus sign. By default, integer literals are in decimal
(radix 10). The following prefixes select a different radix:
\begin{tableau}{|l|l|}{Prefix}{Radix}
\entree{"0x", "0X"}{hexadecimal (radix 16)}
\entree{"0o", "0O"}{octal (radix 8)}
\entree{"0b", "0B"}{binary (radix 2)}
\end{tableau}
(The initial @"0"@ is the digit zero; the @"O"@ for octal is the letter O.)
An integer literal can be followed by one of the letters "l", "L" or "n"
to indicate that this integer has type "int32", "int64" or "nativeint"
respectively, instead of the default type "int" for integer literals.
The interpretation of integer literals that fall outside the range of
representable integer values is undefined.

For convenience and readability, underscore characters (@"_"@) are accepted
(and ignored) within integer literals.

\begin{caml_example}{toplevel}
let house_number = 37
let million = 1_000_000
let copyright = 0x00A9
let counter64bit = ref 0L;;
\end{caml_example}

\subsubsection*{sss:floating-point-literals}{Floating-point literals}

\begin{syntax}
float-literal:
          ["-"] ("0"\ldots"9") { "0"\ldots"9" || "_" } ["." { "0"\ldots"9" || "_" }]
          [("e" || "E") ["+" || "-"] ("0"\ldots"9") { "0"\ldots"9" || "_" }]
        | ["-"] ("0x" || "0X")
          ("0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f")
          { "0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f" || "_" } \\
          ["." { "0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f" || "_" }]
          [("p" || "P") ["+" || "-"] ("0"\ldots"9") { "0"\ldots"9" || "_" }]
\end{syntax}

Floating-point decimal literals consist in an integer part, a
fractional part and
an exponent part. The integer part is a sequence of one or more
digits, optionally preceded by a minus sign. The fractional part is a
decimal point followed by zero, one or more digits.
The exponent part is the character @"e"@ or @"E"@ followed by an
optional @"+"@ or @"-"@ sign, followed by one or more digits.  It is
interpreted as a power of 10.
The fractional part or the exponent part can be omitted but not both, to
avoid ambiguity with integer literals.
The interpretation of floating-point literals that fall outside the
range of representable floating-point values is undefined.

Floating-point hexadecimal literals are denoted with the @"0x"@ or @"0X"@
prefix.  The syntax is similar to that of floating-point decimal
literals, with the following differences.
The integer part and the fractional part use hexadecimal
digits.  The exponent part starts with the character  @"p"@ or @"P"@.
It is written in decimal and interpreted as a power of 2.

For convenience and readability, underscore characters (@"_"@) are accepted
(and ignored) within floating-point literals.

\begin{caml_example}{toplevel}
let pi = 3.141_592_653_589_793_12
let small_negative = -1e-5
let machine_epsilon = 0x1p-52;;
\end{caml_example}

\subsubsection*{sss:character-literals}{Character literals}
\label{s:characterliteral}

\begin{syntax}
char-literal:
          "'" regular-char "'"
        | "'" escape-sequence "'"
;
escape-sequence:
          "\" ("\" || '"' || "'" || "n" || "t" || "b" || "r" || space)
        | "\" ("0"\ldots"9") ("0"\ldots"9") ("0"\ldots"9")
        | "\x" ("0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f")
               ("0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f")
        | "\o" ("0"\ldots"3") ("0"\ldots"7") ("0"\ldots"7")
\end{syntax}

Character literals are delimited by @"'"@ (single quote) characters.
The two single quotes enclose either one character different from
@"'"@ and @'\'@, or one of the escape sequences below:
\begin{tableau}{|l|l|}{Sequence}{Character denoted}
\entree{"\\\\"}{backslash ("\\")}
\entree{"\\\""}{double quote ("\"")}
\entree{"\\'"}{single quote ("'")}
\entree{"\\n"}{linefeed (LF)}
\entree{"\\r"}{carriage return (CR)}
\entree{"\\t"}{horizontal tabulation (TAB)}
\entree{"\\b"}{backspace (BS)}
\entree{"\\"\var{space}}{space (SPC)}
\entree{"\\"\var{ddd}}{the character with ASCII code \var{ddd} in decimal}
\entree{"\\x"\var{hh}}{the character with ASCII code \var{hh} in hexadecimal}
\entree{"\\o"\var{ooo}}{the character with ASCII code \var{ooo} in octal}
\end{tableau}

\begin{caml_example}{toplevel}
let a = 'a'
let single_quote = '\''
let copyright = '\xA9';;
\end{caml_example}
\subsubsection*{sss:stringliterals}{String literals}

\begin{syntax}
string-literal:
          '"' { string-character } '"'
       |  '{' quoted-string-id '|' { newline | any-char } '|' quoted-string-id '}'
;
quoted-string-id:
     { lowercase-letter || '_' }
;
string-character:
          regular-string-char
        | escape-sequence
        | "\u{" {{ "0"\ldots"9" || "A"\ldots"F" || "a"\ldots"f" }} "}"
        | newline
        | '\' newline { space || tab }
\end{syntax}

String literals are delimited by @'"'@ (double quote) characters.
The two double quotes enclose a sequence of either characters
different from @'"'@ and @'\'@, or escape sequences from the
table given above for character literals, or a Unicode character
escape sequence.

A Unicode character escape sequence is substituted by the UTF-8
encoding of the specified Unicode scalar value. The Unicode scalar
value, an integer in the ranges 0x0000...0xD7FF or 0xE000...0x10FFFF,
is defined using 1 to 6 hexadecimal digits; leading zeros are allowed.

\begin{caml_example}{toplevel}
let greeting = "Hello, World!\n"
let superscript_plus = "\u{207A}";;
\end{caml_example}

A newline sequence is a line feed optionally preceded by a carriage
return. Since OCaml 5.2, a newline sequence occurring in a string
literal is normalized into a single line feed character.

To allow splitting long string literals across lines, the sequence
"\\"\var{newline}~\var{spaces-or-tabs} (a backslash at the end of a line
followed by any number of spaces and horizontal tabulations at the
beginning of the next line) is ignored inside string literals.

\begin{caml_example}{toplevel}
let longstr =
  "Call me Ishmael. Some years ago — never mind how long \
  precisely — having little or no money in my purse, and \
  nothing particular to interest me on shore, I thought I\
  \ would sail about a little and see the watery part of t\
  he world.";;
\end{caml_example}

Escaped newlines provide more convenient behavior than non-escaped
newlines, as the indentation is not considered part of the string
literal.

\begin{caml_example}{toplevel}
let contains_unexpected_spaces =
  "This multiline literal
   contains three consecutive spaces."

let no_unexpected_spaces =
  "This multiline literal \n\
   uses a single space between all words.";;
\end{caml_example}

Quoted string literals provide an alternative lexical syntax for
string literals. They are useful to represent strings of arbitrary
content without escaping. Quoted strings are delimited by a matching
pair of @'{' quoted-string-id '|'@ and @'|' quoted-string-id '}'@ with
the same @quoted-string-id@ on both sides. Quoted strings do not
interpret any character in a special way\footnote{Except for the
  normalization of newline sequences into a single line feed mentioned
  earlier.} but requires that the sequence @'|' quoted-string-id '}'@
does not occur in the string itself.  The identifier
@quoted-string-id@ is a (possibly empty) sequence of lowercase letters
and underscores that can be freely chosen to avoid such issue.

\begin{caml_example}{toplevel}
let quoted_greeting = {|"Hello, World!"|}
let nested = {ext|hello {|world|}|ext};;
\end{caml_example}

The current implementation places practically no restrictions on the
length of string literals.

\subsubsection*{sss:labelname}{Naming labels}

To avoid ambiguities, naming labels in expressions cannot just be defined
syntactically as the sequence of the three tokens "~", @ident@ and
":", and have to be defined at the lexical level.

\begin{syntax}
label-name: lowercase-ident
;
label: "~" label-name ":"
;
optlabel: "?" label-name ":"
\end{syntax}

Naming labels come in two flavours: @label@ for normal arguments and
@optlabel@ for optional ones. They are simply distinguished by their
first character, either "~" or "?".

Despite @label@ and @optlabel@ being lexical entities in expressions,
their expansions @'~' label-name ':'@ and @'?' label-name ':'@ will be
used in grammars, for the sake of readability. Note also that inside
type expressions, this expansion can be taken literally, {\em i.e.}
there are really 3 tokens, with optional blanks between them.

\subsubsection*{sss:lex-ops-symbols}{Prefix and infix symbols}

%%  || '`' lowercase-ident '`'

\begin{syntax}
infix-symbol:
        (core-operator-char || '%' || '<') { operator-char }
      | "#" {{ operator-char }}
;
prefix-symbol:
        '!' { operator-char }
      | ('?' || '~') {{ operator-char }}
;
operator-char:
        '~' || '!' || '?' || core-operator-char || '%' || '<' || ':' || '.'
;
core-operator-char:
        '$' || '&' || '*' || '+' || '-' || '/' || '=' || '>' || '@' || '^' || '|'
\end{syntax}
See also the following language extensions:
\hyperref[s:ext-ops]{extension operators},
\hyperref[s:index-operators]{extended indexing operators},
and \hyperref[s:binding-operators]{binding operators}.

Sequences of ``operator characters'', such as "<=>" or "!!",
are read as a single token from the @infix-symbol@ or @prefix-symbol@
class. These symbols are parsed as prefix and infix operators inside
expressions, but otherwise behave like normal identifiers.
%% Identifiers starting with a lowercase letter and enclosed
%% between backquote characters @'`' lowercase-ident '`'@ are also parsed
%% as infix operators.

\subsubsection*{sss:keywords}{Keywords}

The identifiers below are reserved as keywords, and cannot be employed
otherwise:
\begin{verbatim}
      and         as          assert      asr         begin       class
      constraint  do          done        downto      else        end
      exception   external    false       for         fun         function
      functor     if          in          include     inherit     initializer
      land        lazy        let         lor         lsl         lsr
      lxor        match       method      mod         module      mutable
      new         nonrec      object      of          open        or
      private     rec         sig         struct      then        to
      true        try         type        val         virtual     when
      while       with
\end{verbatim}
%
\goodbreak%
%
The following character sequences are also keywords:
%
%% FIXME the token >] is not used anywhere in the syntax
%
\begin{alltt}
"    !=    #     &     &&    '     (     )     *     +     ,     -"
"    -.    ->    .     ..    .~    :     ::    :=    :>    ;     ;;"
"    <     <-    =     >     >]    >}    ?     [     [<    [>    [|"
"    ]     _     `     {     {<    |     |]    ||    }     ~"
\end{alltt}
%
Note that the following identifiers are keywords of the now unmaintained Camlp4
system and should be avoided for backwards compatibility reasons.
%
\begin{verbatim}
    parser    value    $     $$    $:    <:    <<    >>    ??
\end{verbatim}

\subsubsection*{sss:lex-ambiguities}{Ambiguities}

Lexical ambiguities are resolved according to the ``longest match''
rule: when a character sequence can be decomposed into two tokens in
several different ways, the decomposition retained is the one with the
longest first token.

\subsubsection*{sss:lex-linedir}{Line number directives}

\begin{syntax}
linenum-directive:
     '#' {{ "0"\ldots"9" }} '"' { string-character } '"'
\end{syntax}

Preprocessors that generate OCaml source code can insert line number
directives in their output so that error messages produced by the
compiler contain line numbers and file names referring to the source
file before preprocessing, instead of after preprocessing.
A line number directive starts at the beginning of a line,
is composed of a @"#"@ (sharp sign), followed by
a positive integer (the source line number), followed by a
character string (the source file name).
Line number directives are treated as blanks during lexical
analysis.

% FIXME spaces and tabs are allowed before and after the number
% FIXME ``string-character'' is inaccurate: everything is allowed except
%       CR, LF, and doublequote; moreover, backslash escapes are not
% interpreted (especially backslash-doublequote)
% FIXME any number of random characters are allowed (and ignored) at the
%       end of the line, except CR and LF.