/* * Copyright 2010-present Facebook. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #import #import #import "FBAppCall.h" #import "FBLinkShareParams.h" #import "FBOpenGraphActionParams.h" #import "FBPhotoParams.h" @class FBSession; @protocol FBOpenGraphAction; /*! @typedef FBNativeDialogResult enum @abstract Passed to a handler to indicate the result of a dialog being displayed to the user. */ typedef NS_ENUM(NSUInteger, FBOSIntegratedShareDialogResult) { /*! Indicates that the dialog action completed successfully. */ FBOSIntegratedShareDialogResultSucceeded = 0, /*! Indicates that the dialog action was cancelled (either by the user or the system). */ FBOSIntegratedShareDialogResultCancelled = 1, /*! Indicates that the dialog could not be shown (because not on ios6 or ios6 auth was not used). */ FBOSIntegratedShareDialogResultError = 2 }; /*! @typedef @abstract Defines a handler that will be called in response to the native share dialog being displayed. */ typedef void (^FBOSIntegratedShareDialogHandler)(FBOSIntegratedShareDialogResult result, NSError *error); /*! @typedef FBDialogAppCallCompletionHandler @abstract A block that when passed to a method in FBDialogs is called back with the results of the AppCall for that dialog. @discussion This will be called on the UI thread, once the AppCall completes. @param call The `FBAppCall` that was completed. @param results The results of the AppCall for the dialog. This parameters is present purely for convenience, and is the exact same value as call.dialogData.results. @param error The `NSError` representing any error that occurred. This parameters is present purely for convenience, and is the exact same value as call.error. */ typedef void (^FBDialogAppCallCompletionHandler)( FBAppCall *call, NSDictionary *results, NSError *error); /*! @class FBDialogs @abstract Provides methods to display native (i.e., non-Web-based) dialogs to the user. @discussion If you are building an app with a urlSchemeSuffix, you should also set the appropriate plist entry. See `[FBSettings defaultUrlSchemeSuffix]`. */ @interface FBDialogs : NSObject #pragma mark - OSIntegratedShareDialog /*! @abstract Presents a dialog that allows the user to share a status update that may include text, images, or URLs. This dialog is only available on iOS 6.0 and above. The current active session returned by [FBSession activeSession] will be used to determine whether the dialog will be displayed. If a session is active, it must be open and the login method used to authenticate the user must be native iOS 6.0 authentication. If no session active, then whether the call succeeds or not will depend on whether Facebook integration has been configured. @param viewController The view controller which will present the dialog. @param initialText The text which will initially be populated in the dialog. The user will have the opportunity to edit this text before posting it. May be nil. @param image A UIImage that will be attached to the status update. May be nil. @param url An NSURL that will be attached to the status update. May be nil. @param handler A handler that will be called when the dialog is dismissed, or if an error occurs. May be nil. @return YES if the dialog was presented, NO if not (in the case of a NO result, the handler will still be called, with an error indicating the reason the dialog was not displayed) */ + (BOOL)presentOSIntegratedShareDialogModallyFrom:(UIViewController *)viewController initialText:(NSString *)initialText image:(UIImage *)image url:(NSURL *)url handler:(FBOSIntegratedShareDialogHandler)handler; /*! @abstract Presents a dialog that allows the user to share a status update that may include text, images, or URLs. This dialog is only available on iOS 6.0 and above. The current active session returned by [FBSession activeSession] will be used to determine whether the dialog will be displayed. If a session is active, it must be open and the login method used to authenticate the user must be native iOS 6.0 authentication. If no session active, then whether the call succeeds or not will depend on whether Facebook integration has been configured. @param viewController The view controller which will present the dialog. @param initialText The text which will initially be populated in the dialog. The user will have the opportunity to edit this text before posting it. May be nil. @param images An array of UIImages that will be attached to the status update. May be nil. @param urls An array of NSURLs that will be attached to the status update. May be nil. @param handler A handler that will be called when the dialog is dismissed, or if an error occurs. May be nil. @return YES if the dialog was presented, NO if not (in the case of a NO result, the handler will still be called, with an error indicating the reason the dialog was not displayed) */ + (BOOL)presentOSIntegratedShareDialogModallyFrom:(UIViewController *)viewController initialText:(NSString *)initialText images:(NSArray *)images urls:(NSArray *)urls handler:(FBOSIntegratedShareDialogHandler)handler; /*! @abstract Presents a dialog that allows the user to share a status update that may include text, images, or URLs. This dialog is only available on iOS 6.0 and above. An may be specified, or nil may be passed to indicate that the current active session should be used. If a session is specified (whether explicitly or by virtue of being the active session), it must be open and the login method used to authenticate the user must be native iOS 6.0 authentication. If no session is specified (and there is no active session), then whether the call succeeds or not will depend on whether Facebook integration has been configured. @param viewController The view controller which will present the dialog. @param session The to use to determine whether or not the user has been authenticated with iOS native authentication. If nil, then [FBSession activeSession] will be checked. See discussion above for the implications of nil or non-nil session. @param initialText The text which will initially be populated in the dialog. The user will have the opportunity to edit this text before posting it. May be nil. @param images An array of UIImages that will be attached to the status update. May be nil. @param urls An array of NSURLs that will be attached to the status update. May be nil. @param handler A handler that will be called when the dialog is dismissed, or if an error occurs. May be nil. @return YES if the dialog was presented, NO if not (in the case of a NO result, the handler will still be called, with an error indicating the reason the dialog was not displayed) */ + (BOOL)presentOSIntegratedShareDialogModallyFrom:(UIViewController *)viewController session:(FBSession *)session initialText:(NSString *)initialText images:(NSArray *)images urls:(NSArray *)urls handler:(FBOSIntegratedShareDialogHandler)handler; /*! @abstract Determines if the device is capable of presenting the OS integrated share dialog. @discussion This is the most basic check for capability for this feature. @see canPresentOSIntegratedShareDialogWithSession: */ + (BOOL)canPresentOSIntegratedShareDialog; /*! @abstract Determines whether a call to presentShareDialogModallyFrom: will successfully present a dialog. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform and for the current user. @param session The to use to determine whether or not the user has been authenticated with iOS native authentication. If nil, then [FBSession activeSession] will be checked. See discussion above for the implications of nil or non-nil session. @return YES if the dialog would be presented for the session, and NO if not */ + (BOOL)canPresentOSIntegratedShareDialogWithSession:(FBSession *)session; #pragma mark - Native Share Dialog /*! @abstract Determines if the device is capable of presenting the share dialog. @discussion This is the most basic check for capability for this feature. @see canPresentShareDialogWithOpenGraphActionParams: @see canPresentShareDialogWithParams: @see canPresentShareDialogWithPhotos */ + (BOOL)canPresentShareDialog; /*! @abstract Determines whether a call to presentShareDialogWithOpenGraphActionParams:clientState:handler: will successfully present a dialog in the Facebook application. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @param params The parameters for the FB share dialog. @return YES if the dialog would be presented, and NO if not @discussion A return value of YES here indicates that the corresponding presentShareDialogWithOpenGraphActionParams method will return a non-nil FBAppCall for the same params. And vice versa. */ + (BOOL)canPresentShareDialogWithOpenGraphActionParams:(FBOpenGraphActionParams *)params; /*! @abstract Determines whether a call to presentShareDialogWithTarget: will successfully present a dialog in the Facebook application. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @param params The parameters for the FB share dialog. @return YES if the dialog would be presented, and NO if not @discussion A return value of YES here indicates that the corresponding presentShareDialogWithParams method will return a non-nil FBAppCall for the same params. And vice versa. */ + (BOOL)canPresentShareDialogWithParams:(FBLinkShareParams *)params; /*! @abstract Determines whether a call to presentShareDialogWithPhotoParams: will successfully present a dialog in the Facebook application. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @return YES if the dialog would be presented, and NO if not @discussion A return value of YES here indicates that the corresponding presentShareDialogWithPhotoParams method will return a non-nil FBAppCall. */ + (BOOL)canPresentShareDialogWithPhotos; /*! @abstract Presents a dialog in the Facebook application that allows the user to share a status update that may include text, images, or URLs. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the FB share dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithParams:(FBLinkShareParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithLink:(NSURL *)link handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param name The name, or title associated with the link. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithLink:(NSURL *)link name:(NSString *)name handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param name The name, or title associated with the link. May be nil. @param caption The caption to be used with the link. May be nil. @param description The description associated with the link. May be nil. @param picture The link to a thumbnail to associate with the link. May be nil. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithLink:(NSURL *)link name:(NSString *)name caption:(NSString *)caption description:(NSString *)description picture:(NSURL *)picture clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the FB share dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithPhotoParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithPhotoParams:(FBPhotoParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param photos An NSArray containing UIImages to be shared. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithPhotoParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithPhotos:(NSArray *)photos handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to share the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param photos An NSArray containing UIImages to be shared. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithPhotoParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithPhotos:(NSArray *)photos clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to publish an Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the Open Graph action dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithOpenGraphActionParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithOpenGraphActionParams:(FBOpenGraphActionParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to publish the supplied Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param action The Open Graph action to be published. May not be nil. @param actionType the fully-specified Open Graph action type of the action (e.g., my_app_namespace:my_action). @param previewPropertyName the name of the property on the action that represents the primary Open Graph object associated with the action; this object will be displayed in the preview portion of the share dialog. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithOpenGraphActionParams method is also returning YES for the same params. */+ (FBAppCall *)presentShareDialogWithOpenGraphAction:(id)action actionType:(NSString *)actionType previewPropertyName:(NSString *)previewPropertyName handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook application that allows the user to publish the supplied Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Facebook app, and will cause the current app to be suspended. When the share is complete, the Facebook app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param action The Open Graph action to be published. May not be nil. @param actionType the fully-specified Open Graph action type of the action (e.g., my_app_namespace:my_action). @param previewPropertyName the name of the property on the action that represents the primary Open Graph object associated with the action; this object will be displayed in the preview portion of the share dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentShareDialogWithOpenGraphActionParams method is also returning YES for the same params. */ + (FBAppCall *)presentShareDialogWithOpenGraphAction:(id)action actionType:(NSString *)actionType previewPropertyName:(NSString *)previewPropertyName clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; #pragma mark - Message Dialog /*! @abstract Determines if the device is capable of presenting the message dialog. @discussion This is the most basic check for capability for this feature. @see canPresentMessageDialogWithOpenGraphActionParams: @see canPresentMessageDialogWithParams: @see canPresentMessageDialogWithPhotos */ + (BOOL)canPresentMessageDialog; /*! @abstract Determines whether a call to `presentMessageDialogWithOpenGraphActionParams:...` will successfully present a dialog in the Facebook Messenger app. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @param params the dialog parameters @return YES if the dialog would be presented, and NO if not */ + (BOOL)canPresentMessageDialogWithOpenGraphActionParams:(FBOpenGraphActionParams *)params; /*! @abstract Determines whether a call to `presentMessageDialogWithParams:...` will successfully present a dialog in the Facebook Messenger app. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @param params the dialog parameters @return YES if the dialog would be presented, and NO if not */ + (BOOL)canPresentMessageDialogWithParams:(FBLinkShareParams *)params; /*! @abstract Determines whether a call to `presentMessageDialogWithPhotos:...` will successfully present a dialog in the Facebook Messenger app. This is useful for applications that need to modify the available UI controls depending on whether the dialog is available on the current platform. @return YES if the dialog would be presented, and NO if not */ + (BOOL)canPresentMessageDialogWithPhotos; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to publish an Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the Open Graph action dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding `canPresentMessageDialogWithOpenGraphActionParams:` method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithOpenGraphActionParams:(FBOpenGraphActionParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to publish the supplied Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param action The Open Graph action to be published. May not be nil. @param actionType the fully-specified Open Graph action type of the action (e.g., my_app_namespace:my_action). @param previewPropertyName the name of the property on the action that represents the primary Open Graph object associated with the action; this object will be displayed in the preview portion of the share dialog. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentMessageDialogWithOpenGraphActionParams method is also returning YES for the same params. */+ (FBAppCall *)presentMessageDialogWithOpenGraphAction:(id)action actionType:(NSString *)actionType previewPropertyName:(NSString *)previewPropertyName handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to publish the supplied Open Graph action. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param action The Open Graph action to be published. May not be nil. @param actionType the fully-specified Open Graph action type of the action (e.g., my_app_namespace:my_action). @param previewPropertyName the name of the property on the action that represents the primary Open Graph object associated with the action; this object will be displayed in the preview portion of the share dialog. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentMessageDialogWithOpenGraphActionParams method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithOpenGraphAction:(id)action actionType:(NSString *)actionType previewPropertyName:(NSString *)previewPropertyName clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to send the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the Message Dialog. The "friends" and "place" properties will be ignored as the Facebook Messenger app does not support tagging. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding `canPresentMessageDialogWithPhotos` method is also returning YES. */ + (FBAppCall *)presentMessageDialogWithPhotoParams:(FBPhotoParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to send the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param photos An NSArray containing UIImages to be shared. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding `canPresentMessageDialogWithPhotos` method is also returning YES. */ + (FBAppCall *)presentMessageDialogWithPhotos:(NSArray *)photos handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to send the supplied photo(s). No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param photos An NSArray containing UIImages to be shared. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding `canPresentMessageDialogWithPhotos` method is also returning YES. */ + (FBAppCall *)presentMessageDialogWithPhotos:(NSArray *)photos clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to share a status update that may include text, images, or URLs. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param params The parameters for the Message Dialog. The "friends" and "place" properties will be ignored as the Facebook Messenger app does not support tagging. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding `canPresentMessageDialogWithParams:` method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithParams:(FBLinkShareParams *)params clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentMessageDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithLink:(NSURL *)link handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param name The name, or title associated with the link. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentMessageDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithLink:(NSURL *)link name:(NSString *)name handler:(FBDialogAppCallCompletionHandler)handler; /*! @abstract Presents a dialog in the Facebook Messenger app that allows the user to share the supplied link. No session is required, and the app does not need to be authorized to call this. Note that this will perform an app switch to the Messenger app, and will cause the current app to be suspended. When the share is complete, the Messenger app will redirect to a url of the form "fb{APP_ID}://" that the application must handle. The app should then call [FBAppCall handleOpenURL:sourceApplication:fallbackHandler:] to trigger the appropriate handling. Note that FBAppCall will first try to call the completion handler associated with this method, but since during an app switch, the calling app may be suspended or killed, the app must also give a fallbackHandler to the handleOpenURL: method in FBAppCall. @param link The URL link to be attached to the post. @param name The name, or title associated with the link. May be nil. @param caption The caption to be used with the link. May be nil. @param description The description associated with the link. May be nil. @param picture The link to a thumbnail to associate with the link. May be nil. @param clientState An NSDictionary that's passed through when the completion handler is called. This is useful for the app to maintain state about the share request that was made so as to have appropriate action when the handler is called. May be nil. @param handler A completion handler that may be called when the status update is complete. May be nil. If non-nil, the handler will always be called asynchronously. @return An FBAppCall object that will also be passed into the provided FBAppCallCompletionHandler. @discussion A non-nil FBAppCall object is only returned if the corresponding canPresentMessageDialogWithParams method is also returning YES for the same params. */ + (FBAppCall *)presentMessageDialogWithLink:(NSURL *)link name:(NSString *)name caption:(NSString *)caption description:(NSString *)description picture:(NSURL *)picture clientState:(NSDictionary *)clientState handler:(FBDialogAppCallCompletionHandler)handler; @end