{
  "NeoPixelMode": "Different modes for RGB or RGB+W NeoPixel strips",
  "PhotonMode": "A determines the mode of the photon",
  "light": "Functions to operate colored LEDs.",
  "light.NeoPixelAnimation": "An animation of a NeoPixel",
  "light.NeoPixelAnimation.createRenderer": "Creates an animator instance",
  "light.NeoPixelAnimation.createRenderer|param|strip": "the strip to execute on",
  "light.NeoPixelStrip": "A NeoPixel strip",
  "light.NeoPixelStrip.brightness": "Get the brightness of the pixel strip.",
  "light.NeoPixelStrip.buf": "Gets the underlying color buffer for the entire strip",
  "light.NeoPixelStrip.buffered": "Gets a value indicated if the changes are buffered",
  "light.NeoPixelStrip.clear": "Turn off all pixel LEDs.",
  "light.NeoPixelStrip.graph": "Display a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.",
  "light.NeoPixelStrip.graph|param|high": "maximum value, 0 to autoscale",
  "light.NeoPixelStrip.graph|param|value": "current value to plot",
  "light.NeoPixelStrip.length": "Get the number of pixels on the strip",
  "light.NeoPixelStrip.mode": "Gets the LED data layout mode",
  "light.NeoPixelStrip.move": "Shift LEDs forward and clear with zeros.\nYou need to call ``show`` to make the changes visible.",
  "light.NeoPixelStrip.move|param|offset": "number of pixels to shift forward, eg: 1",
  "light.NeoPixelStrip.photonFlip": "Switch the direction of the photon pulse.",
  "light.NeoPixelStrip.photonForward": "Move a photon effect along the pixel strip by a number of steps.",
  "light.NeoPixelStrip.photonForward|param|steps": "number of steps (lights) to move, eg: 1",
  "light.NeoPixelStrip.pixelColor": "Gets the pixel color.",
  "light.NeoPixelStrip.pixelColor|param|pixeloffset": "position of the NeoPixel in the strip",
  "light.NeoPixelStrip.range": "Create a range of pixels.",
  "light.NeoPixelStrip.range|param|length": "number of pixels in the range, eg: 4",
  "light.NeoPixelStrip.range|param|start": "offset in the NeoPixel strip to start the range",
  "light.NeoPixelStrip.setAll": "Set all of the pixels on the strip to one RGB color.",
  "light.NeoPixelStrip.setAll|param|rgb": "RGB color of the LED",
  "light.NeoPixelStrip.setBrightness": "Set the brightness of the strip. This flag only applies to future operation.",
  "light.NeoPixelStrip.setBrightness|param|brightness": "a measure of LED brightness in 0-255. eg: 20",
  "light.NeoPixelStrip.setBuffered": "Enables or disables automatically calling show when a change is made",
  "light.NeoPixelStrip.setBuffered|param|on": "call show whenever a light is modified",
  "light.NeoPixelStrip.setGradient": "Sets a gradient between two colors",
  "light.NeoPixelStrip.setGradient|param|endColor": "the end color",
  "light.NeoPixelStrip.setGradient|param|startColor": "the start color",
  "light.NeoPixelStrip.setLength": "Sets the number of LEDs on a strip",
  "light.NeoPixelStrip.setMode": "Sets the color mode and clears the colors.",
  "light.NeoPixelStrip.setMode|param|mode": "the kind of color encoding required by the programmable lights",
  "light.NeoPixelStrip.setPhotonMode": "Set the photon mode to pen up, pen down, or eraser.",
  "light.NeoPixelStrip.setPhotonMode|param|mode": "the desired mode",
  "light.NeoPixelStrip.setPhotonPenColor": "Set the photon color.",
  "light.NeoPixelStrip.setPhotonPenColor|param|color": "the color of the photon",
  "light.NeoPixelStrip.setPhotonPenHue": "Sets the photon hue.",
  "light.NeoPixelStrip.setPhotonPenHue|param|hue": "the hue of the photon color",
  "light.NeoPixelStrip.setPhotonPosition": "Sets the photon position to a given light index",
  "light.NeoPixelStrip.setPhotonPosition|param|index": "index of the light, if out of bound, the index is wrapped",
  "light.NeoPixelStrip.setPixelBrightness": "Sets an individual pixel brightness",
  "light.NeoPixelStrip.setPixelBrightness|param|index": "@param brightness ",
  "light.NeoPixelStrip.setPixelColor": "Set the pixel to a given color.\nYou need to call ``show`` to make the changes visible.",
  "light.NeoPixelStrip.setPixelColor|param|pixeloffset": "position of the NeoPixel in the strip",
  "light.NeoPixelStrip.setPixelWhiteLED": "Set the white brightness of a pixel in a NeoPixel strip of RGB+W LEDs.\nThis only works for RGB+W NeoPixels.",
  "light.NeoPixelStrip.setPixelWhiteLED|param|pixeloffset": "position of the LED in the strip",
  "light.NeoPixelStrip.setPixelWhiteLED|param|white": "brightness of the white LED",
  "light.NeoPixelStrip.show": "Make the strip show all the new changes for the pixels.",
  "light.NeoPixelStrip.showAnimation": "Show an animation or queue an animation in the animation queue",
  "light.NeoPixelStrip.showAnimationFrame": "Show a single animation frame.",
  "light.NeoPixelStrip.showAnimationFrame|param|animation": "the animation to run",
  "light.NeoPixelStrip.showAnimation|param|animation": "the animation to run",
  "light.NeoPixelStrip.showAnimation|param|duration": "the duration to run in milliseconds, eg: 500",
  "light.NeoPixelStrip.showColors": "Renders a pattern of colors on the strip",
  "light.NeoPixelStrip.startBrightnessTransition": "Starts a brightness transition on the strip (and cancels any other running transition)",
  "light.NeoPixelStrip.startBrightnessTransition|param|transition": "@param duration ",
  "light.NeoPixelStrip.stopAllAnimations": "Stop the current animation and any other animations ready to show.",
  "light.NeoPixelStrip.stopBrightnessTransition": "Stops any running brightness transition",
  "light._animationPicker": "An animation that can be shown on a light strip",
  "light._animationPicker|param|animation": "The animation type",
  "light.animation": "Creates a builtin animation",
  "light.animation|param|kind": "the type of animation",
  "light.clear": "Turn off all pixel LEDs on the onboard strip.",
  "light.colors": "Get the RGB value of a known color",
  "light.createAPA102Strip": "Creates a strip of colored LEDs (APA102)",
  "light.createNeoPixelStrip": "Creates a strip of colored LEDs (WS2812b)",
  "light.createStrip": "Create a new programmable light strip.",
  "light.createStrip|param|mode": "the light encoding mode for different LED strips, eg: NeoPixelMode.RGB_GRB",
  "light.createStrip|param|numleds": "number of leds in the strip, eg: 30",
  "light.createStrip|param|pin": "the pin where the strip is connected.",
  "light.defaultStrip": "Gets the default light strip",
  "light.fade": "Use color.fade instead",
  "light.fade|param|brightness": "the amount of brightness to apply to the color, eg: 128",
  "light.graph": "Display a vertical bar graph based on the `value` and `high` value.\nIf `high` is 0, the chart gets adjusted automatically.",
  "light.graph|param|high": "maximum value, 0 to autoscale",
  "light.graph|param|value": "current value to plot",
  "light.hsv": "Convert an HSV (hue, saturation, value) color to RGB",
  "light.hsv|param|hue": "value of the hue channel between 0 and 255. eg: 255",
  "light.hsv|param|sat": "value of the saturation channel between 0 and 255. eg: 255",
  "light.hsv|param|val": "value of the value channel between 0 and 255. eg: 255",
  "light.onboardStrip": "Get the onboard light strip.",
  "light.photonFlip": "Switch the direction of the photon pulse.",
  "light.photonForward": "Move a photon effect along the pixel strip by a number of steps.",
  "light.photonForward|param|steps": "number of steps (lights) to move, eg: 1",
  "light.pixelColor": "Gets the pixel color at a given offset.",
  "light.pixelColor|param|pixeloffset": "position of the NeoPixel in the strip",
  "light.pixels": "Gets the default external light strip",
  "light.range": "Create a range of pixels.",
  "light.range|param|length": "number of pixels in the range, eg: 4",
  "light.range|param|start": "offset in the NeoPixel strip to start the range",
  "light.rgb": "Converts red, green, blue channels into a RGB color",
  "light.rgb|param|blue": "value of the blue channel between 0 and 255. eg: 255",
  "light.rgb|param|green": "value of the green channel between 0 and 255. eg: 255",
  "light.rgb|param|red": "value of the red channel between 0 and 255. eg: 255",
  "light.setAll": "Set all of the pixels on the strip to one RGB color.",
  "light.setAll|param|rgb": "RGB color of the LED",
  "light.setBrightness": "Set the brightness of the strip. This flag only applies to future operation.",
  "light.setBrightness|param|brightness": "a measure of LED brightness in 0-255. eg: 20",
  "light.setGradient": "Sets a gradient between two colors",
  "light.setLength": "Sets the number of LEDS on the default light strip",
  "light.setMode": "Sets the type of RGB light on the default strip",
  "light.setPhotonMode": "Set the photon mode to pen up, pen down, or eraser.",
  "light.setPhotonMode|param|mode": "the desired mode",
  "light.setPhotonPenHue": "Set the photon color hue.",
  "light.setPhotonPenHue|param|hue": "the color hue of the photon",
  "light.setPhotonPosition": "Sets the photon position to a given light index",
  "light.setPhotonPosition|param|index": "index of the light, if out of bound, the index is wrapped",
  "light.setPixelColor": "Set the pixel to a given color.",
  "light.setPixelColor|param|color": "RGB color of the LED",
  "light.setPixelColor|param|pixeloffset": "position of the NeoPixel in the strip",
  "light.showAnimation": "Show an animation or queue an animation in the animation queue",
  "light.showAnimationFrame": "Show a single animation frame",
  "light.showAnimationFrame|param|animation": "the animation to run, eg: light.rainbowAnimation",
  "light.showAnimation|param|animation": "the animation to run, eg: light.rainbowAnimation",
  "light.showAnimation|param|duration": "the duration to run in milliseconds, eg: 500",
  "light.stopAllAnimations": "Stop the current animation and any other animations ready to show."
}