/**
 * Hypertext Transfer Protocol (HTTP) response status codes.
 *
 * @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
 */
/**
 * The server has received the request headers and the client should proceed to send the request body
 * (in the case of a request for which a body needs to be sent; for example, a POST request).
 * Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
 * To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
 * and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued.
 */
export declare const Continue = 100;
/**
 * The requester has asked the server to switch protocols and the server has agreed to do so.
 */
export declare const SwitchingProtocols = 101;
/**
 * A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request.
 * This code indicates that the server has received and is processing the request, but no response is available yet.
 * This prevents the client from timing out and assuming the request was lost.
 */
export declare const Processing = 102;
/**
 * Standard response for successful HTTP requests.
 * The actual response will depend on the request method used.
 * In a GET request, the response will contain an entity corresponding to the requested resource.
 * In a POST request, the response will contain an entity describing or containing the result of the action.
 */
export declare const Ok = 200;
/**
 * The request has been fulfilled, resulting in the creation of a new resource.
 */
export declare const Created = 201;
/**
 * The request has been accepted for processing, but the processing has not been completed.
 * The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
 */
export declare const Accepted = 202;
/**
 * SINCE HTTP/1.1
 * The server is a transforming proxy that received a 200 OK from its origin;
 * but is returning a modified version of the origin's response.
 */
export declare const NonAuthoritativeInformation = 203;
/**
 * The server successfully processed the request and is not returning any content.
 */
export declare const NoContent = 204;
/**
 * The server successfully processed the request, but is not returning any content.
 * Unlike a 204 response, this response requires that the requester reset the document view.
 */
export declare const ResetContent = 205;
/**
 * The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
 * The range header is used by HTTP clients to enable resuming of interrupted downloads;
 * or split a download into multiple simultaneous streams.
 */
export declare const PartialContent = 206;
/**
 * The message body that follows is an XML message and can contain a number of separate response codes;
 * depending on how many sub-requests were made.
 */
export declare const MultiStatus = 207;
/**
 * The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response;
 * and are not being included again.
 */
export declare const AlreadyReported = 208;
/**
 * The server has fulfilled a request for the resource;
 * and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
 */
export declare const ImUsed = 226;
/**
 * Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
 * For example, this code could be used to present multiple video format options;
 * to list files with different filename extensions, or to suggest word-sense disambiguation.
 */
export declare const MultipleChoices = 300;
/**
 * This and all future requests should be directed to the given URI.
 */
export declare const MovedPermanently = 301;
/**
 * This is an example of industry practice contradicting the standard.
 * The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
 * (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
 * with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
 * to distinguish between the two behaviours. However, some Web applications and frameworks
 * use the 302 status code as if it were the 303.
 */
export declare const Found = 302;
/**
 * SINCE HTTP/1.1
 * The response to the request can be found under another URI using a GET method.
 * When received in response to a POST (or PUT/DELETE), the client should presume that
 * the server has received the data and should issue a redirect with a separate GET message.
 */
export declare const SeeOther = 303;
/**
 * Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.
 * In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
 */
export declare const NotModified = 304;
/**
 * SINCE HTTP/1.1
 * The requested resource is available only through a proxy, the address for which is provided in the response.
 * Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
 */
export declare const UseProxy = 305;
/**
 * No longer used. Originally meant "Subsequent requests should use the specified proxy."
 */
export declare const SwitchProxy = 306;
/**
 * SINCE HTTP/1.1
 * In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
 * In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request.
 * For example, a POST request should be repeated using another POST request.
 */
export declare const TemporaryRedirect = 307;
/**
 * The request and all future requests should be repeated using another URI.
 * 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
 * So, for example, submitting a form to a permanently redirected resource may continue smoothly.
 */
export declare const PermanentRedirect = 308;
/**
 * The server cannot or will not process the request due to an apparent client error
 * (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
 */
export declare const BadRequest = 400;
/**
 * Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
 * been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the
 * requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
 * "unauthenticated",i.e. the user does not have the necessary credentials.
 */
export declare const Unauthorized = 401;
/**
 * Reserved for future use. The original intention was that this code might be used as part of some form of digital
 * cash or micro payment scheme, but that has not happened, and this code is not usually used.
 * Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
 */
export declare const PaymentRequired = 402;
/**
 * The request was valid, but the server is refusing action.
 * The user might not have the necessary permissions for a resource.
 */
export declare const Forbidden = 403;
/**
 * The requested resource could not be found but may be available in the future.
 * Subsequent requests by the client are permissible.
 */
export declare const NotFound = 404;
/**
 * A request method is not supported for the requested resource;
 * for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
 */
export declare const MethodNotAllowed = 405;
/**
 * The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
 */
export declare const NotAcceptable = 406;
/**
 * The client must first authenticate itself with the proxy.
 */
export declare const ProxyAuthenticationRequired = 407;
/**
 * The server timed out waiting for the request.
 * According to HTTP specifications:
 * "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."
 */
export declare const RequestTimeout = 408;
/**
 * Indicates that the request could not be processed because of conflict in the request;
 * such as an edit conflict between multiple simultaneous updates.
 */
export declare const Conflict = 409;
/**
 * Indicates that the resource requested is no longer available and will not be available again.
 * This should be used when a resource has been intentionally removed and the resource should be purged.
 * Upon receiving a 410 status code, the client should not request the resource in the future.
 * Clients such as search engines should remove the resource from their indices.
 * Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
 */
export declare const Gone = 410;
/**
 * The request did not specify the length of its content, which is required by the requested resource.
 */
export declare const LengthRequired = 411;
/**
 * The server does not meet one of the preconditions that the requester put on the request.
 */
export declare const PreconditionFailed = 412;
/**
 * The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large".
 */
export declare const PayloadTooLarge = 413;
/**
 * The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request;
 * in which case it should be converted to a POST request.
 * Called "Request-URI Too Long" previously.
 */
export declare const UriTooLong = 414;
/**
 * The request entity has a media type which the server or resource does not support.
 * For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
 */
export declare const UnsupportedMediaType = 415;
/**
 * The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
 * For example, if the client asked for a part of the file that lies beyond the end of the file.
 * Called "Requested Range Not Satisfiable" previously.
 */
export declare const RangeNotSatisfiable = 416;
/**
 * The server cannot meet the requirements of the Expect request-header field.
 */
export declare const ExpectationFailed = 417;
/**
 * This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol;
 * and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
 * teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com.
 */
export declare const IAmATeapot = 418;
/**
 * The request was directed at a server that is not able to produce a response (for example because a connection reuse).
 */
export declare const MisdirectedRequest = 421;
/**
 * The request was well-formed but was unable to be followed due to semantic errors.
 */
export declare const UnprocessableEntity = 422;
/**
 * The resource that is being accessed is locked.
 */
export declare const Locked = 423;
/**
 * The request failed due to failure of a previous request (e.g., a PROPPATCH).
 */
export declare const FailedDependency = 424;
/**
 * The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.
 */
export declare const UpgradeRequired = 426;
/**
 * The origin server requires the request to be conditional.
 * Intended to prevent "the 'lost update' problem, where a client
 * GETs a resource's state, modifies it, and PUTs it back to the server;
 * when meanwhile a third party has modified the state on the server, leading to a conflict."
 */
export declare const PreconditionRequired = 428;
/**
 * The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
 */
export declare const TooManyRequests = 429;
/**
 * The server is unwilling to process the request because either an individual header field;
 * or all the header fields collectively, are too large.
 */
export declare const RequestHeaderFieldsTooLarge = 431;
/**
 * A server operator has received a legal demand to deny access to a resource or to a set of resources
 * that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
 */
export declare const UnavailableForLegalReasons = 451;
/**
 * A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
 */
export declare const InternalServerError = 500;
/**
 * The server either does not recognize the request method, or it lacks the ability to fulfill the request.
 * Usually this implies future availability (e.g., a new feature of a web-service API).
 */
export declare const NotImplemented = 501;
/**
 * The server was acting as a gateway or proxy and received an invalid response from the upstream server.
 */
export declare const BadGateway = 502;
/**
 * The server is currently unavailable (because it is overloaded or down for maintenance).
 * Generally, this is a temporary state.
 */
export declare const ServiceUnavailable = 503;
/**
 * The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
 */
export declare const GatewayTimeout = 504;
/**
 * The server does not support the HTTP protocol version used in the request
 */
export declare const HttpVersionNotSupported = 505;
/**
 * Transparent content negotiation for the request results in a circular reference.
 */
export declare const VariantAlsoNegotiates = 506;
/**
 * The server is unable to store the representation needed to complete the request.
 */
export declare const InsufficientStorage = 507;
/**
 * The server detected an infinite loop while processing the request.
 */
export declare const LoopDetected = 508;
/**
 * Further extensions to the request are required for the server to fulfill it.
 */
export declare const NotExtended = 510;
/**
 * The client needs to authenticate to gain network access.
 * Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used
 * to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).
 */
export declare const NetworkAuthenticationRequired = 511;