/**
 * @file CosaL3G4200D.ino
 * @version 1.0
 *
 * @section License
 * Copyright (C) 2013-2015, Mikael Patel
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * @section Description
 * Cosa demonstration of L3G4200D digital gryoscope device driver.
 *
 * @section Circuit
 * The GY-80 10DOF module with pull-up resistors (4K7) for TWI signals and
 * 3V3 internal voltage converter.
 * @code
 *                           GY-80
 *                       +------------+
 * (VCC)---------------1-|VCC         |
 *                     2-|3V3         |
 * (GND)---------------3-|GND         |
 * (A5/SCL)------------4-|SCL         |
 * (A4/SDA)------------5-|SDA         |
 *                     6-|M-DRDY      |
 *                     7-|A-INT1      |
 *                     8-|T-INT1      |
 *                     9-|P-XCLR      |
 *                    10-|P-EOC       |
 *                       +------------+
 * @endcode
 *
 * This file is part of the Arduino Che Cosa project.
 */

#include <L3G4200D.h>

#include "Cosa/Trace.hh"
#include "Cosa/UART.hh"
#include "Cosa/Watchdog.hh"
#include "Cosa/Memory.h"

// Digital Gyroscope using sub-address(1) on breakout board
L3G4200D gyroscope(1);

void setup()
{
  // Start trace output stream on the serial port
  uart.begin(9600);
  trace.begin(&uart, PSTR("CosaL3G4200D: started"));

  // Print some memory statistics
  TRACE(free_memory());
  TRACE(sizeof(TWI::Driver));
  TRACE(sizeof(L3G4200D));

  // Start the watchdog ticks and the gyroscope
  Watchdog::begin();
  TRACE(gyroscope.begin());
}

void loop()
{
  // Periodically sample the printout the gyroscope reading
  trace << gyroscope << endl;
  sleep(2);
}