# xiaomi-mqtt
[![NPM version][npm-image]][npm-url]
[npm-image]: http://img.shields.io/npm/v/xiaomi-mqtt.svg
[npm-url]: https://npmjs.org/package/xiaomi-mqtt
A Bridge between the Xiaomi Mi Smart Home Gateway and the Mqtt broker.
Xiaomi-mqtt exchanges data between the xiaomi gateway and the mqtt-broker at a low-level, principally based on the device `sid` (Security Identifier?). The automation and dashboard tasks are implemented at a higher level. [Node-RED](http://nodered.org/) is the perfect tool to use for this purpose.
### Installation
```sh
sudo npm install -g xiaomi-mqtt
```
### Installation from GitHub
Clone the source repository directly from GitHub to a local folder:
```sh
git clone https://github.com/cflurin/xiaomi-mqtt.git
```
Local Installation:
```sh
cd xiaomi-mqtt
npm install
```
### Configuration
Copy the `config.json` file to the `.xiaomi-mqtt` folder inside of your home folder.
```sh
mkdir ~/.xiaomi-mqtt
cp config.json ~/.xiaomi-mqtt/
```
On Linux the full path for your config.json would be `~/.xiaomi-mqtt/config.json`.
Edit `~/xiaomi-mqtt/config.json` to fit your requirements:
```sh
{
"xiaomi": {
"serverPort": 9898,
"multicastAddress": "224.0.0.50",
"multicastPort": 4321,
"password": "FFF..."
},
"mqtt": {
"url": "mqtt://127.0.0.1",
"port": 1883,
"username": "foo",
"password": "bar",
"topic_mode": "short",
"topic_prefix": "xiaomi"
},
"loglevel": "info",
"heartbeatfreq": 6,
"dataFormat": "parsed"
}
```
```sh
"topic_mode": <"short"> | <"full"> | <"both">
```
- `short` default
- `full` allow you to do some topic filtering directly on client side.
- `both` 2 topics are sent, `short` and `full`.
```sh
"loglevel": <"debug"> | <"info"> | <"warn"> | <"error">
```
Replace `127.0.0.1` with the address of your mqtt broker.
Set `dataFormat` to `raw` to get data without parsing.
By default the gateway send heartbeat every 10s which can do some pollution when testing/debug, the counter parameter in config named `heartbeatfreq` avoid this, in the example above set to 6 means only send a MQTT message each 6 heartbeat, so each 60s. Note this apply only to gateway heartbeat not the device's one.
### Usage (global installation)
Use `xiaomi-mqtt` or `xm` to run xiaomi-mqtt.
Use `ctrl c` to stop xiaomi-mqtt.
### Usage (local installation)
In the `xiaomi-mqtt` folder.
Use `npm start` to run xiaomi-mqtt.
Use `ctrl c` to stop xiaomi-mqtt.
#
# mqtt API
If the configuration option `topic_mode` is set to `short` or `both`, the data (payload) is sent/received in a JSON format using following topics:
* xiaomi/from
* xiaomi/to/read
* xiaomi/to/write
* xiaomi/to/get_id_list
**Note**: Have look at: [How to benefit of the full topic option](https://github.com/cflurin/xiaomi-mqtt/wiki/How-to-benefit-of-the-full-topic-option)
## Howto examples
At start and stop xiaomi-mqtt sends following messages.
### start
```sh
topic: xiaomi/from
payload: {"cmd":"xm","msg":"xiaomi-mqtt started."}
```
and
```sh
topic: xiaomi/from
payload:
{
"cmd":"get_id_list_ack",
"sid":"fff...",
"data":["158d00017118ac","158d0001a2eb66","158d0001f35b90","158d0001e52516"]
}
```
### stop
```sh
topic: xiaomi/from
payload: {"cmd":"xm","msg":"xiaomi-mqtt stopped."}
```
### heartbeat
**gateway**
```sh
topic: xiaomi/from
payload:
{
"cmd": "heartbeat",
"model": "gateway",
"sid": "fff...",
"short_id": "0",
"token": "v4GeGCO9TBpTUlVy",
"data": {
"ip": "127.0.0.1"
}
}
```
**cube**
```sh
topic: xiaomi/from
payload:
{
"cmd": "heartbeat",
"model": "cube",
"sid": "158d0003102db5",
"short_id": 46605,
"data": {
"voltage": 2985
}
}
```
### reporting
Xiaomi-mqtt sends periodically or on events device reports.
**gateway**
```sh
topic: xiaomi/from
payload:
{
"cmd": "report",
"model": "gateway",
"sid": "fff...",
"short_id": 0,
"data": {
"rgb": 0,
"illumination": 1292
}
}
```
**sensor_ht**
```sh
topic: xiaomi/from
payload:
{
"cmd":"report",
"model":"sensor_ht",
"sid":"158d0001a2eb66",
"short_id":30124,
"data":{"voltage":3005,"temperature":16.7,"humidity":null}
}
```
```sh
"data": {"voltage":3005,"temperature":16.7,"humidity":null}
or
"data": {"voltage":3005,"temperature":null,"humidity":51.7}
```
**magnet**
```sh
topic: xiaomi/from
payload:
{
"cmd": "report",
"model": "magnet",
"sid": "158d0001f3651f",
"short_id": 57029,
"data": {
"status": "close"
}
}
```
```sh
"status": "close", "open"
```
**switch**
```sh
topic: xiaomi/from
payload:
{
"cmd":"report",
"model":"switch",
"sid":"158d0001f35b90",
"short_id":46517,
"data":{"status":"click"}
}
```
```sh
"status": "click", "double_click", "long_click_press", "long_click_release"
```
**86sw2**
```sh
topic: xiaomi/from
payload:
{
"cmd":"report",
"model":"86sw2",
"sid":"158d0001f55b88",
"short_id":33911,
"data":{"channel_0":"click"}
}
```
```sh
"data":{"channel_0":"click"}
or
"data":{"channel_1":"click"}
```
**cube**
```sh
topic: xiaomi/from
payload:
{
"cmd":"report",
"model":"cube",
"sid":"158d0003102db5",
"short_id":46605,
"data":{"status":"move"}
}
```
```sh
"status": "move", "flip90", "flip180", "tape_twice", "shake_air", "alert"
or
"rotate": "99,999", "-99.999"
```
### read
**gateway**
```sh
topic: xiaomi/to/read
payload: {"sid":"fff..."}
```
response
```sh
topic: xiaomi/from
payload:
{
"cmd":"read_ack",
"model":"gateway",
"sid":"fff...",
"short_id":0,
"data":{"rgb":0,"illumination":1292,"proto_version":"1.0.9"}
}
```
**sensor_ht**
```sh
topic: xiaomi/to/read
payload: {"sid":"158d00017118ac"}
```
response
```sh
topic: xiaomi/from
payload:
{
"cmd":"read_ack",
"model":"sensor_ht",
"sid":"158d00017118ac",
"short_id":48290,
"data":{"voltage":2985,"temperature":19,"humidity":46.3}
}
```
**switch**
```sh
topic: xiaomi/to/read
payload: {"sid":"158d0001f35b90"}
```
response
```sh
topic: xiaomi/from
payload:
{
"cmd":"read_ack",
"model":"switch",
"sid":"158d0001f35b90",
"short_id":46517,
"data":{"voltage":3112}
}
```
### write
```sh
topic: xiaomi/to/write
payload:
{
"cmd": "write",
"model": "gateway",
"sid": "fff...",
"data": {
"rgb": "1000FF00"
}
}
```
**Note:** rgb = [brightness] [red] [green] [blue] - each hex 00 to FF
response
```sh
topic: xiaomi/from
payload:
{
"cmd":"write_ack",
"model":"gateway",
"sid":"fff...",
"short_id":0,
"data":{"rgb":268500736,"illumination":1292,"proto_version":"1.0.9"}
}
```
### get_id_list:
```sh
topic: xiaomi/to/get_id_list
payload: {"sid":"fff..."}
```
**Note:** sid = gateway sid.
response
```sh
topic: xiaomi/from
payload:
{
"cmd":"get_id_list_ack",
"sid":"fff...",
"data":["158d00017118ac","158d0001a2eb66","158d0001f35b90","158d0001e52516"]
}
```
## Tested devices (models):
* gateway
* sensor_ht
* motion
* sensor_motion.aq2
* sensor_wleak.aq1
* magnet
* switch
* 86sw1
* 86sw2
* cube
* ctrl_neutral1
* ctrl_neutral2
* ctrl_ln1.aq1
**Note:** Untested devices using the same format will also send a payload.
#
# Node-RED examples
### basic
### write gateway
Flow:
```sh
[{"id":"9339669d.8e38b8","type":"mqtt out","z":"d0877ed4.9e0cc","name":"","topic":"xiaomi/to/write","qos":"","retain":"","broker":"325f5be5.555734","x":560,"y":480,"wires":[]},{"id":"c508a302.61467","type":"ui_colour_picker","z":"d0877ed4.9e0cc","name":"","label":"gateway color","group":"4d5fcade.c527d4","format":"hex","outformat":"string","showSwatch":true,"showPicker":false,"showValue":true,"showAlpha":false,"showLightness":true,"dynOutput":"false","order":0,"width":0,"height":0,"passthru":true,"topic":"","x":220,"y":480,"wires":[["dcd9ac95.fd93"]]},{"id":"dcd9ac95.fd93","type":"template","z":"d0877ed4.9e0cc","name":"map","field":"payload","fieldType":"msg","format":"handlebars","syntax":"mustache","template":"{\n \"cmd\": \"write\",\n \"model\": \"gateway\",\n \"sid\": \"fff...\",\n \"data\": {\n \"rgb\": \"10{{payload}}\"\n }\n}","output":"json","x":390,"y":480,"wires":[["9339669d.8e38b8"]]},{"id":"325f5be5.555734","type":"mqtt-broker","z":"","broker":"127.0.0.1","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""},{"id":"4d5fcade.c527d4","type":"ui_group","z":"","name":"Xiaomi","tab":"f3d46e49.beaec","order":1,"disp":true,"width":"6"},{"id":"f3d46e49.beaec","type":"ui_tab","z":"","name":"Main","icon":"dashboard","order":1}]
```
Flow:
```sh
[{"id":"aacbdba0.0519f8","type":"inject","z":"d0877ed4.9e0cc","name":"doorbell","topic":"","payload":"{\"cmd\":\"write\",\"model\":\"gateway\",\"sid\":\"fff...\",\"short_id\":0,\"key\":\"8\",\"data\":{\"mid\":10}}","payloadType":"json","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":120,"y":580,"wires":[["83a2b4f.eb0d748"]]},{"id":"8f56c43e.16c048","type":"inject","z":"d0877ed4.9e0cc","name":"police","topic":"","payload":"{\"cmd\":\"write\",\"model\":\"gateway\",\"sid\":\"fff...\",\"short_id\":0,\"key\":\"8\",\"data\":{\"mid\":1}}","payloadType":"json","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":110,"y":620,"wires":[["83a2b4f.eb0d748"]]},{"id":"83a2b4f.eb0d748","type":"mqtt out","z":"d0877ed4.9e0cc","name":"","topic":"xiaomi/to/write","qos":"","retain":"","broker":"325f5be5.555734","x":340,"y":580,"wires":[]},{"id":"325f5be5.555734","type":"mqtt-broker","z":"","broker":"192.168.0.35","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willPayload":"","birthTopic":"","birthQos":"0","birthPayload":""}]
```