---
# Title and expected duration of the task
- title: PMA 3 cummerbunds install
  duration: 45


  steps:
  # First steps in IV column (first column)
  - IV:
    - step: Start (EV1) PMA3 CUMMERBUNDS PET (expect 00:30) ____:____
    - step: Start (EV2) PMA3 CUMMERBUNDS PET (expect 00:30) ____:____

  # Steps in EV1 column (second column)
  - EV1:
    - step: Translate to PMA3 port/aft via Lab Struts, EV1 follows
      checks:
        - Up CETA Spur to Face 1
        - Nadir to LAB on port/outboard LAB strut
        - Drop GREEN hook on inboard port LAB strut HR 1002 or Lab 0246 near base of port LAB strut

  # Steps in EV2 column (third column)
  - EV2:
    - step: Translate to PMA3 stbd/aft via ESP2 starboard route, EV2 leads
      checks:
        - Around edge of ESP-2 to gap spanner
        - Zenith across stbd Fluid Tray
        - Drop GREEN hook on stbd LAB HR 0247 (near base of stbd LAB strut)
    - step: Stow Cummerbund ORU Bag on PMA3 HR 1609 and 1605 (zenith stanchion) w/ hinge Nadir
      comment: this is dumb
    - step: Open bag lid and restrain open using lid straps to HRs 1606 and 1605 (nadir stanchion)

  # Combined columns puts the steps on both crewmembers, and creates a sync
  # point where the text lines up.
  - EV1 + EV2:
    - step: Verify safety tethers not crossing

  # Adding images
  - IV:
    - image: pma3-large-oru-bag-location.jpg
  - EV1 + EV2:
    - image: pma3-translation.jpg